nach oben

Journal of Materials Engineering and Performance

Erschienen in:

30.08.2018

Very High Cycle Fatigue of a Cast Aluminum Alloy: Size Effect and Crack Initiation

verfasst von: Hongqian Xue, Zhidan Sun, Xianjie Zhang, Tao Gao, Zhi Li

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 10/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Fatigue properties of an Al-Si-Cu cast alloy were investigated with life up to very high cycle fatigue regime. Particular attention was given to specimen size effect and fatigue crack initiation mechanism. Uniaxial fatigue tests with constant amplitudes were carried out by using ultrasonic fatigue testing machine operating at 20 kHz, compared to the results obtained by using conventional hydraulic fatigue machine at 35 Hz. In order to evaluate the size effect, two sets of specimens with different dimensions were used. The results show that the fatigue strength of the studied alloy decreases with the increase in specimen size. Scanning electron microscopy observation of fracture surfaces revealed that most fatigue cracks initiated from microstructural defects such as porosity located on specimen surface or in subsurface. Weibull statistical analysis of fatigue data accounting for size effect was performed to predict the fatigue life of the Al-Si-Cu alloy in the very high cycle regime. Good agreement was found between the fatigue life prediction and the experimental data.

Vorheriger Artikel Wear Mechanisms in Contacts Involving Slippers in Axial Piston Pumps: A Multi-Technical Analysis

Nächster Artikel Influence of Laser Surface Texturing on Tribological Performance of Tool Steels

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

C. Bathias, Piezoelectric Fatigue Testing Machines and Devices, Int. J. Fatigue, 2006, 28, p 1438–1445CrossRef

H. Mayer, Ultrasonic Torsion and Tension–Compression Fatigue Testing: Measuring Principles and Investigations on 2024-T351 Aluminum Alloy, Int. J. Fatigue, 2006, 28, p 1446–1455CrossRef

C. Bathias and P.C. Pari, Gigacycle Fatigue in Mechanical Practice, Marcel Dekker, New York, 2005

H. Mayer, M. Papakyriacou, B. Zettl, and S.E. Stanzl-Tschegg, Influence of Porosity on the Fatigue Limit of Die Cast Magnesium and Aluminum Alloys, Int. J. Fatigue, 2003, 25, p 245–256CrossRef

M.J. Caton, J.W. Jones, H. Mayer, S.E. Stanzl-Tschegg, and J.E. Allison, Demonstration of an Endurance Limit in Cast 319 Aluminum, Metall. Mater. Trans. A, 2003, 34, p 33–40CrossRef

M.J. Caton, J.W. Jones, and J.E. Allison, The Influence of Heat Treatment and Solidification Time on the Behavior of Small Fatigue Cracks in a Cast Aluminum Alloy, Mater. Sci. Eng. A, 1998, 314, p 81–85CrossRef

H.R. Ammar, A.M. Samuel, and F.H. Samuel, Porosity and the Fatigue Behavior of Hypoeutectic and Hypereutectic Aluminum-Silicon Casting Alloys, Int. J. Fatigue, 2008, 30, p 1024–1035CrossRef

P. Mu, Y. Nadot, C. Nadot-Martin, A. Chabod, I. Serrano-Munoz, and C. Verdu, Influence of Casting Defects on the Fatigue Behavior of Cast Aluminum AS7G06-T6, Int. J. Fatigue, 2014, 63, p 97–109CrossRef

I. Koutiri, D. Bellett, F. Morel, and E. Pessard, A Probabilistic Model for the High Cycle Fatigue Behaviour of Cast Aluminium Alloys Subject to Complex Loads, Int. J. Fatigue, 2013, 47, p 137–147CrossRef

10.

R. Gonzalez, D.I. Martinez, J.A. Gonzalez, J. Talamantes, S. Valtierra, and R. Colas, Experimental Investigation for Fatigue Strength of a Cast Aluminium Alloy, Int. J. Fatigue, 2011, 33, p 273–278CrossRef

11.

D.A. Lados and D. Apelian, Relationships Between Microstructure and Fatigue Crack Propagation Paths in Al-Si-Mg Cast Alloys, Eng. Fract. Mech., 2008, 75, p 821–832CrossRef

12.

L. Zeng, J. Sakamoto, A. Fujii, and H. Noguchi, Role of Eutectic Silicon Particles in Fatigue Crack Initiation and Propagation and Fatigue Strength Characteristics of Cast Aluminum Alloy A356, Eng. Fract. Mech., 2014, 115, p 1–12CrossRef

13.

P. Li, P.D. Lee, D.M. Maijer, and T.C. Lindley, Quantification of the Interaction Within Defect Populations on Fatigue Behavior in an Aluminum Alloy, Acta Mater., 2009, 57, p 3539–3548CrossRef

14.

V.D. Le, F. Morel, D. Bellett, N. Saintier, and P. Osmond, Simulation of the Kitagawa-Takahashi Diagram Using a Probabilistic Approach for Cast Al-Si Alloys Under Different Multiaxial Loads, Int. J. Fatigue, 2016, 93, p 109–121CrossRef

15.

I. Serrano-Munoz, J.Y. Buffiere, C. Verdu, Y. Gaillard, P. Mu, and Y. Nadot, Influence of Surface and Internal Casting Defects on the Fatigue Behavior of A357-T6 Cast Aluminium Alloy, Int. J. Fatigue, 2016, 82, p 361–370CrossRef

16.

C. Bruggera, T. Palin-Luc, P. Osmondb, and M. Blanc, Gigacycle Fatigue Behavior of a Cast Aluminum Alloy Under Biaxial Bending: Experiments with a New Piezoelectric Fatigue Testing Device, Proc. Struct. Integr., 2016, 2, p 1173–1180CrossRef

17.

X. Zhu, A. Shyam, J.W. Jones, H. Mayer, J.V. Lasecki, and J.F. Allison, Effects of Microstructure and Temperature on Fatigue Behavior of E319-T7 Cast Aluminum Alloy in Very Long Life Cycles, Int. J. Fatigue, 2006, 28, p 1566–1571CrossRef

18.

A. Ezanno, C. Doudard, S. Calloch, and J.P. Heuzé, A New Approach to Characterizing and Modeling the High Cycle Fatigue Properties of Cast Materials Based on Self-Heating Measurements Under Cyclic Loadings, Int. J. Fatigue, 2013, 47, p 232–243CrossRef

19.

S. Mohd, Y. Mutoh, Y. Otsuka, Y. Miyashita, T. Koike, and T. Suzuki, Scatter Analysis of Fatigue Life and Pore Size Data of Die-Cast AM60B Magnesium Alloy, Eng. Fail. Anal., 2012, 22, p 64–72CrossRef

20.

S. Dezecot and M. Brochu, Microstructural Characterization and High Cycle Fatigue Behavior of Investment Cast A357 Aluminum Alloy, Int. J. Fatigue, 2015, 77, p 154–159CrossRef

21.

Y. Furuya, Specimen Size effects on Gigacycle Fatigue Properties of High-Strength Steel Under Ultrasonic Fatigue Testing, Scr. Mater., 2008, 58, p 1014–1017CrossRef

22.

Y. Murakami, Stress concentration, Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions, Y. Murakami, Ed., Elsevier, Oxford, 2002, p 11–24 CrossRef

23.

H. Xue, Explanation on Gigacycle Fatigue of Materials in Tension, Bending and Torsion Loading, PhD thesis, CNAM, Paris, 2005

24.

H. Xue, H. Tao, and C. Bathias, The Analysis of Specimen Design for Fatigue Test at Ultrasonic Frequency, VHCF3, 2004, p 456-463

25.

H. Xue, T. Wu, and C. Bathias, Gigacycle Fatigue Behavior of Cast Aluminum in Tension and Torsion Loading, Trans. Nanjing Univ. Aeronaut. Astronaut., 2011, 28, p 32–37

26.

V.D. Le, F. Morel, D. Bellett, N. Saintier, and P. Osmond, Multiaxial High Cycle Fatigue Damage Mechanisms Associated with the Different Microstructural Heterogeneities of Cast Aluminium Alloys, Mater. Sci. Eng. A, 2016, 649, p 426–440CrossRef

27.

T.O. Mbuya, I. Sinclair, A.J. Moffat, and P.A.S. Reed, Analysis of Fatigue Crack Initiation and S-N Response of Model Cast Aluminium Piston Alloys, Mater. Sci. Eng. A, 2011, 528, p 7331–7340CrossRef

28.

R. Gonzalez, A. Gonzalez, J. Talamantes-Silva, S. Valtierra, R.D. Mercado-Solis, N.F. Garza-Montes-de-Oca, and R. Colas, Fatigue of an Aluminium Cast Alloy Used in the Manufacture of Automotive Engine Blocks, Int. J. Fatigue, 2013, 54, p 118–126CrossRef

29.

M. Shirani and G. Harkegard, Fatigue Life Distribution and Size Effect in Ductile Cast Iron for Wind Turbine Components, Eng. Fail. Anal., 2011, 18, p 12–24CrossRef

30.

A. Cetin, A. Naess, and G. Harkegard, A Physically Based Extreme Value Characterization of Material Fatigue, Int. J. Fatigue, 2013, 47, p 216–221CrossRef

31.

A. Wormsen, B. Sjodin, G. Harkegard, and A. Fjeldstad, Non-local Stress Approach for Fatigue Assessment Based on Weakest-Link Theory and Statistics of Extremes, Fatig. Fract. Eng. Mater. Struct., 2007, 30, p 1214–1227CrossRef

32.

H.P. Gaenser, Some Notes on Gradient, Volumetric and Weakest Link Concepts in Fatigue, Comput. Mater. Sci., 2008, 44, p 230–239CrossRef

33.

H. Belmonte, M. Mulheron, and P. Smith, Weibull Analysis, Extrapolations and Implications for Condition Assessment of Cast Iron Water Mains, Fatig. Fract. Eng. Mater. Struct., 2007, 30, p 964–990CrossRef

34.

C.M. Sonsino, Course of SN-Curves Especially in the High-Cycle Fatigue Regime with Regard to Component Design and Safety, Int. J. Fatigue, 2007, 29, p 2246–2258CrossRef

35.

S. Romano, A. Brückner-Foit, A. Brandão, J. Gumpinger, T. Ghidini, and S. Beretta, Fatigue Properties of AlSi10Mg Obtained by Additive Manufacturing: Defect-based Modelling and Prediction of Fatigue Strength, Eng. Fract. Mech., 2018, 187, p 165–189CrossRef

Titel: Very High Cycle Fatigue of a Cast Aluminum Alloy: Size Effect and Crack Initiation
verfasst von: Hongqian Xue
Zhidan Sun
Xianjie Zhang
Tao Gao
Zhi Li
Publikationsdatum: 30.08.2018
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 10/2018
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3617-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 10/2018

Electrodeposition and Properties of Composites Consisting of Carbon Nanotubes and Copper

The Effects of Sodium Tungstate on the Characteristics of Microarc Oxidation Coating on Ti6Al4V

Phase-Field Modeling of Nugget Zone for a AZ31-Mg-Alloy Friction Stir Weld

Wetting and Interfacial Reactivity of Zn-Coated Steel Products with Cu-Si, Cu-Sn and Al-Si Filler Metals for Laser Brazing Application

Integrated System of Thermal/Dimensional Analysis for Quality Control of Metallic Melt and Ductile Iron Casting Solidification

Diffusion Bonding of TiAl to Ti6Al4V Using Nanolayers

Premium Partner

Marktübersichten