nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

4. Wear Characteristics of Untreated and Alkali-Treated Rice Husk–Epoxy Bio-composite

verfasst von : Neeraj Bisht, P. C. Gope

Erschienen in: Trends in Materials Engineering

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Use of bio-composites is gaining acceptance in the engineering world swiftly. However, materials wear out and erode with passage of time. Not much study, however, has been done on this aspect of bio-composites. In this paper, study of tribological behaviour of rice husk-reinforced composites has been done. The effect of rice husk addition has been observed on the wear characteristics of the composite using a pin-on-disc machine. It is seen that the increase in weight percentage of rice husk results in poorer wear characteristics. The SEM micrographs showed improper adhesion between the fibre and the matrix as the reason behind this deterioration in wear strength. Pre-treatment of rice husk with sodium hydroxide improves the adhesion between the matrix and the fibre which is evidently proven by the improvement in wear rate. The increase in wear strength is further corroborated by SEM photographs. It can be concluded that improving the adhesion between the fibre and the matrix by alkali treatment can enhance the working life of the material which can be beneficial in economic and environmental terms.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Optimization-Related Studies of EDMed Aluminum Metal Matrix Composites: A State-of-the-Art Review

Nächstes Kapitel Tribological Performances of Woven Carbon Fabric/Epoxy Composites Under Dry and Oil Lubrication Condition: An Experimental Investigation

Trade and Markets Division. Food and Agriculture Organization of the United Nations, FAO Rice Market Monitoring Bulletin (2010)

Beagle, B.C.: Rice-husk conversion to energy: FAO Agricultural Service Bulletin (1978)

Ismail, H., Nasir, S.M.: Dynamic vulcanization of rubber wood-filled polypropylene/natural rubber blends. Polym. Testing 20, 819–824 (2001)CrossRef

Oksman, K., Clemons, C.: Mechanical properties and morphology of impact modified polypropylene–wood flour composites. J. Appl. Polymer Sci. 67, 1503–1513 (1997)

RazaviNouri, M., Jafarzadeh-Dogouri, F., Oromiehie, A., et al.: Mechanical properties and water absorption behaviour of chopped rice husk filled polypropylene composites. Iran. Polym. J. 15, 757–766 (2006)

Yang, Han-Seung, Kim, Hyun-Joong, Son, Jungil, et al.: Rice husk flour filled polypropylene composites, mechanical and morphological studies. Compos. Struct. 63, 305–312 (2004)CrossRef

Premalal, H.G.B., Ismail, H., Baharin, A.: Comparison of the mechanical properties of the rice husk powder filled polypropylene composites with talc filled polypropylene composites. Polym. Testing 21, 833–839 (2002)CrossRef

Dimzoski, B., Bogoeva-Gaceva, G., Gentile, G., Avella, M., et al.: Polypropylene-based eco-composites filled with agricultural rice hulls waste. Chem. Biochem. Eng. 23, 225–230 (2009)

Rosa, S.M.L., Santos, E.F., Ferreira, C.A., et al.: Studies on the Properties of Rice Husk filled PP composites-effect of maleated PP. Mater. Res. 12, 333–338 (2009)

10.

Ghofrani, M., Pishan, S., Mohammad, M.R., et al.: A study on rice-husk/recycled high density polyethylene composites—their physical and mechanical properties. Environ. Sci. 9, 99–112 (2012)

11.

Atuanya, U., Olaitan, S.A., Azeez, T.O., et al.: Effect of rice husk filler on the mechanical properties of polyethylene matrix composite. Int. J. Curr. Res. Revisions 05, 111–118 (2013)

12.

Rahman, M.R., Islam, M.N., Huque, M.M., et al.: Effect of chemical treatment on the rice hush (RH) reinforced polyethylene composites, Bio-Resources 5, 854–869 (2010)

13.

Nawadon, P., Covavisaruch, S., Chanakul, S.: Mechanical properties, thermal degradation and natural weathering of high density polyethylene/ rice hull composites compatibilized with maleic anhydride grafted polyethylene. J. Polym. Res. 19, 1–9 (2012)

14.

Attharangsan, S., Ismail, H., Abu Bakar, M., et al.: The effect of Rice husk powder on Standard Malaysian Natural Rubber Grade L (SMR L) and Epoxidized Natural Rubber (ENR 50) composites. Polym. Plast. Technol. Eng. 51, 231–237 (2012)

15.

Ramasamy, S., Ismail, H., Munusamy, Y.: Tensile and morphological properties of rice husk powder filled natural rubber latex foam. Polym. Plast. Technol. Eng. 51, 1524–1529 (2012)

16.

Rozman, H.D., Ang, L.G., Tay, G.S., et al.: The mechanical properties of rice husk-polyurethane composites. Polym. Plast. Technol. Eng. 42, 327–343 (2003)CrossRef

17.

Ofem, M.I., Umar, M., Ovat, F.A.: Mechanical properties of rice husk filled cashew nut shell liquid Resin composites. J. Mater. Sci. Res. 1, 89–97 (2012)

18.

Yussuf, A.A., Massoumi, I., Hassan, A.: Comparison of polylactic acid/Kenaf and polylactic acid/rise husk composites: the influence of the natural fibres on the mechanical, thermal and biodegradability properties. J. Polym. Environ. 18, 422–429 (2010)

19.

Shivappa, D., Ananda, G.K., Shivakumar, N.: Mechanical characterization of rice husk flour reinforced vinylester polymer composite. Int. J. Innov. Res. Sci. Eng. Technol. 2 (2013)

20.

Garcia, D., Lopez, J., Balart, R., et al.: Composites based on sintering rice husk-waste tire rubber mixtures. Mater. Des. 28, 2234–2238 (2007)CrossRef

21.

Yang, H.-S., Kim, H.-J., Park, H.-J., et al.: Effect of compatibilizing agents on rice-husk flour reinforced polypropylene composites. Compos. Struct. 77, 45–55 (2007)CrossRef

22.

Nguyen, M.H., Kim, B.S., Ha, J.R., et al.: Effect of plasma and NaOH treatment for rice husk/PP composites. Adv. Compos. Mater. 20, 435–442 (2011)CrossRef

23.

Ahmad, I., Lane, C.E., Mohd, D.H., et al.: Electron-beam-irradiated rice husk powder as reinforcing filler in natural rubber/high-density polyethylene (NR/HDPE) composites. Compos. B 43, 3069–3075 (2012)

24.

Rozman, H.D., Lee, M.H., Kumar, R.N., et al.: The effect of chemical modification on rice husk with Glycidyl Methacrylate on the mechanical and physical properties of rice husk-polystyrene composites. J. Wood Chem. Technol. 20, 93–109 (2000)CrossRef

25.

Santiagoo, R., Ismail, H. Hussin, K.: Effects of acetic anhydride on the properties of polypropylene (PP)/recycled acrylonitrile butadiene (NBRr)/rice husk powder (RHP) composites. Polym. Plast. Technol. Eng. 51, 1505–1512 (2012)

26.

Huang, Gu: Tensile behaviours of the coir fibre and related composites after NaOH treatment. Mater. Des. 30, 3931–3934 (2009)CrossRef

27.

Rout, J., Misra, M., Tripathy, S.S., et al.: The influence of fibre treatment on the performance of coir-polyester composites. Compos. Sci. Technol. 63, 1303–1310 (2001)CrossRef

28.

Rahmana, M.M., Khan, M.A.: Surface treatment of coir (Cocos nucifera) fibres and its influence on the fibres physico-mechanical properties. Compos. Sci. Technol. 67, 2369–2376 (2007)

29.

Zum Gahr, K.-H.: Microstructure and Wear of Materials, 10th edn. Tribology Series. Elsevier Publishers

30.

Chand, N., Sharma, P., Fahim, M.: Tribology of maleic anhydride modified rice-husk filled polyvinylchloride. Wear 269, 847–853 (2010)CrossRef

31.

Majhi, S., Samantarai, S.P., Acharya, S.K.: Tribological behaviour of modified rice husk filled epoxy composite. Int. J. Sci. Eng. Res. 3(6) (2012)

32.

Chand, N., Dwivedi, U.K.: Effect of coupling agent on abrasive wear behaviour of chopped jute fibre-reinforced polypropylene composites. Wear 261, 1057–1063 (2006)

33.

Singh, V.K., Gope, P.C.: Silica-styrene-butadiene rubber filled hybrid composites: experimental characterization and modeling. J. Reinf. Plast. Compos. 29, 2450–2468 (2010)CrossRef

34.

Neeraj, B., Gope, P.C.: Mechanical properties of rice husk flour reinforced epoxy bio-composite. Int. J. Eng. Res. Appl. 5(6), 123–128 (2015)

Titel: Wear Characteristics of Untreated and Alkali-Treated Rice Husk–Epoxy Bio-composite
verfasst von: Neeraj Bisht
P. C. Gope
Verlag: Springer Singapore
Buch: Trends in Materials Engineering
Print ISBN: 978-981-13-9015-9

Electronic ISBN: 978-981-13-9016-6

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-981-13-9016-6_4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht