nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

42. Wear Performance Evaluation of AlCrN Based Coating Deposited by PVD Technique Under Dry and Cryogenic Environments

verfasst von : Abhishek Singh, S. Ghosh, S. Aravindan

Erschienen in: Advances in Micro and Nano Manufacturing and Surface Engineering

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The current study investigates the wear performance of the AlCrN based coatings deposited by conventional cathodic arc evaporation (CAE) technique and arc enhanced high impulse magnetron sputtering (HiPIMS) technique. The formation of the defect (holes, pores and droplet formation) on the coated surface due to continuous movement of cathode spot make the surface topography of the coating uneven in comparison to the later thus causing reduction of tool performance. The performance of the coating was evaluated in two environments for better understanding of the basic mechanics involved in wear phenomenon for AlCrN based coating deposited by different techniques. The results have demonstrated that the coating deposited by hybrid technique has performed better in comparison to conventionally deposited coating in both the environment.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Three Turn ECAP Processing of AA6061 Alloy: Microstructure and Mechanical Properties

Nächstes Kapitel Numerical and Experimental Analysis of Plasma Nitrided XM-19 Stainless Steel

El-gallab, M., Sklad, M.: Machining of Al/SiC particulate metal-matrix composites Part I : tool performance 83, 151–158 (1998)CrossRef

Kursuncu, B., Caliskan, H., Guven, S.Y., Panjan, P.: Improvement of cutting performance of carbide cutting tools in milling of the Inconel 718 superalloy using multilayer nanocomposite hard coating and cryogenic heat treatment. Int. J. Adv. Manuf. Technol. 1–13 (2018). https://doi.org/10.1007/s00170-018-1931-zCrossRef

Endrino, J.L., Fox-Rabinovich, G.S., Gey, C.: Hard AlTiN, AlCrN PVD coatings for machining of austenitic stainless steel. Surf. Coatings Technol. 200, 6840–6845 (2006). https://doi.org/10.1016/j.surfcoat.2005.10.030CrossRef

Viana, R., de Lima, M.S.F., Sales, W.F., da Silva, W.M., Machado, Á.R.: Laser texturing of substrate of coated tools—performance during machining and in adhesion tests. Surf. Coatings Technol. 276, 485–501 (2015). https://doi.org/10.1016/j.surfcoat.2015.06.025CrossRef

Čekada, M., Panjan, P., Kek-Merl, D., Panjan, M., Kapun, G.: SEM study of defects in PVD hard coatings. Vacuum 82, 252–256 (2007). https://doi.org/10.1016/j.vacuum.2007.07.005CrossRef

Zhu, D., Zhang, X., Ding, H.: Tool wear characteristics in machining of nickel-based superalloys. Int. J. Mach. Tools Manuf 64, 60–77 (2013). https://doi.org/10.1016/j.ijmachtools.2012.08.001CrossRef

Arunachalam, R., Mannan, M.A.: Machinability of nickel-based high temperature alloys. Mach. Sci. Technol. 4, 127–168 (2000). https://doi.org/10.1080/10940340008945703CrossRef

Akhtar, W., Sun, J., Sun, P., Chen, W., Saleem, Z.: Tool wear mechanisms in the machining of Nickel based super-alloys: a review. Front. Mech. Eng. 9, 106–119 (2014). https://doi.org/10.1007/s11465-014-0301-2CrossRef

Kaynak, Y.: Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining. Int. J. Adv. Manuf. Technol. 72, 919–933 (2014). https://doi.org/10.1007/s00170-014-5683-0CrossRef

10.

Hong, S.Y., Markus, I., Jeong, W.: New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4 V. Int. J. Adv. Manuf. Technol. 41, 2245–2260 (2001). https://doi.org/10.1016/s0890-6955(01)00041-4CrossRef

Titel: Wear Performance Evaluation of AlCrN Based Coating Deposited by PVD Technique Under Dry and Cryogenic Environments
verfasst von: Abhishek Singh
S. Ghosh
S. Aravindan
Verlag: Springer Singapore
Buch: Advances in Micro and Nano Manufacturing and Surface Engineering
Print ISBN: 978-981-329-424-0

Electronic ISBN: 978-981-329-425-7

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-981-32-9425-7_42

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht