nach oben

Erschienen in:

18.01.2024 | Technical Paper

A conceptual study on novel current mirror integrated cantilever (CMIC) mass sensor for micro-gram (\(\mu\)g) range sensing applications

verfasst von: Menuvolu Tetseo, Kalpana Gogoi, Shashi Kumar, Gaurav Kumar, Peesapati Rangababu, Akhilrendra Pratap Singh, Pradeep Kumar Rathore

Erschienen in: Microsystem Technologies | Ausgabe 3/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The work reported in this paper describes the design and simulation of a novel current mirror readout circuit based MOSFET integrated cantilever structure for micro-gram (\(\mu\)g) mass sensing applications. The proposed mass sensing structure consist of silicon cantilever as the micromechanical structure, MOSFET as strain sensing element and current mirror as a readout circuit. In this paper, studies have been carried out on three structures (a) n-channel MOSFET based resistive loaded current mirror integrated cantilever mass sensor (b) p-channel MOSFET based resistive loaded current mirror integrated cantilever mass sensor and (c) n- and p- channel MOSFETs based dual current mirror integrated cantilever mass sensor. The input MOSFET(s) of the current mirror acts as the reference transistor(s) while the output MOSFET(s) of the mirror circuit acts as strain sensing element(s) to measure the cantilever deflection under externally applied load. The structural and the electrical characteristics of the sensors were simulated using COMSOL Multiphysics and TSPICE software respectively. Simulation results showed a sensitivity of 21.89 \(\mu\)V/\(\mu\)g, 1 \(\mu\)V/\(\mu\)g and 115.57 \(\mu\)V/\(\mu\)g for nMOS, pMOS and dual channel cantilever mass sensor. The fabrication steps and mask layout of the proposed sensor have also been presented in this paper. The novelty of this work is emphasized by the innovative integration of a CMOS current mirror circuit with a cantilever for mass sensing.

Vorheriger Artikel Role of technological innovation in vision achievement and organizational excellence

Nächster Artikel Correction: A conceptual study on novel current mirror integrated cantilever (CMIC) mass sensor for micro-gram (µg) range sensing applications

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Afrang S, Mobki H, Hassanzadeh M et al (2019) Design and simulation of a mems analog micro-mirror with improved rotation angle. Microsyst Technol. https://doi.org/10.1007/s00542-018-4083-zCrossRef

Ai C, Zhao X, Wen D (2020) Characteristics research of a high sensitivity piezoelectric mosfet acceleration sensor. Sensors 20(17):4988. https://doi.org/10.3390/s20174988CrossRef

Bao M (2005) Analysis and design principles of MEMS devices. Elsevier

Beeby S (2004) MEMS mechanical sensors. Artech House

Bogue R (2013) Recent developments in mems sensors: a review of applications, markets and technologies. Sens Rev 33(4):300–304. https://doi.org/10.1108/SR-05-2013-678CrossRef

Bradley AT, Jaeger RC, Suhling JC et al (2001) Piezoresistive characteristics of short-channel mosfets on (100) silicon. IEEE Trans Electron Devices 48(9):2009–2015. https://doi.org/10.1109/16.944190CrossRef

Chaste J, Eichler A, Moser J et al (2012) A nanomechanical mass sensor with yoctogram resolution. Nat Nanotechnol 7(5):301–304. https://doi.org/10.1038/nnano.2012.42CrossRef

Chauhan S, Ansari MZ (2021) Vacuum-assisted piezoelectric cantilever mass sensor performance. J Mech Sci Technol 35:5489–5494. https://doi.org/10.1007/s12206-021-1120-0CrossRef

Chien CC, Jiang J, Gong B et al (2022) Afm microfluidic cantilevers as weight sensors for live single cell mass measurements. Meas Sci Technol 33(9):095009. https://doi.org/10.1088/1361-6501/ac7280CrossRef

Chircov C, Grumezescu AM (2022) Microelectromechanical systems (mems) for biomedical applications. Micromachines 13(2):164. https://doi.org/10.3390/mi13020164CrossRef

Davis ZJ, Abadal G, Helbo B et al (2003) Monolithic integration of mass sensing nano-cantilevers with cmos circuitry. Sens Actuators, A Phys 105(3):311–319. https://doi.org/10.1016/S0924-4247(03)00208-5CrossRef

Dorey A, Maddern T (1969) The effect of strain on mos transistors. Solid-State Electron 12(3):185–189. https://doi.org/10.1016/0038-1101(69)90030-6CrossRef

Eddy DS, Sparks DR (1998) Application of mems technology in automotive sensors and actuators. Proc IEEE 86(8):1747–1755. https://doi.org/10.1109/5.704280CrossRef

Finkbeiner S (2013) Mems for automotive and consumer electronics. In: 2013 Proceedings of the ESSCIRC (ESSCIRC), IEEE, pp 9–14, https://doi.org/10.1109/ESSCIRC.2013.6649059

Granados-Rojas B, Reyes-Barranca M, González-Navarro Y et al (2021) Two-objective metaheuristic optimization for floating gate transistor-based cmos-mems inertial sensors. Microsyst Technol 27:2889–2901. https://doi.org/10.1007/s00542-020-05194-wCrossRef

Haga Y, Esashi M (2004) Biomedical microsystems for minimally invasive diagnosis and treatment. Proc IEEE 92(1):98–114. https://doi.org/10.1109/JPROC.2003.820545CrossRef

Huang YJ, Huang CW, Lin TH et al (2013) A cmos cantilever-based label-free dna soc with improved sensitivity for hepatitis b virus detection. IEEE Trans Biomed Circuits Syst 7(6):820–831CrossRef

Ikeda A, Hamaguchi K, Ogi H et al (2006) Mobility change of mosfets in a chip-stacked multichip package. Electron Commun Jpn (Part II: Electron) 89(7):1–8. https://doi.org/10.1002/ecjb.20246CrossRef

Jang D, Jung G, Jeong Y et al (2020) Barometric pressure sensor with air pocket integrated with mosfets on the same substrate. J Semicond Technol Sci 20(3):305–310. https://doi.org/10.5573/JSTS.2020.20.3.305CrossRef

Jaramillo A, Quinchia S, Barrera B et al (2021) Experimental fresnel and fourier digital holography using a digital micro-mirror device. J of Opt. https://doi.org/10.1088/2040-8986/abd9deCrossRef

Javed Y, Mansoor M, Shah IA (2019) A review of principles of mems pressure sensing with its aerospace applications. Sens Rev 39(5):652–664. https://doi.org/10.1108/SR-06-2018-0135CrossRef

Jin D, Li X, Liu J et al (2006) High-mode resonant piezoresistive cantilever sensors for tens-femtogram resoluble mass sensing in air. J Micromech Microeng 16(5):1017. https://doi.org/10.1088/0960-1317/16/5/019CrossRef

Joshi P, Kumar S, Jain V et al (2019) Distributed mems mass-sensor based on piezoelectric resonant micro-cantilevers. J Microelectromechanical Syst 28(3):382–389. https://doi.org/10.1109/JMEMS.2019.2908879CrossRef

Khoshnoud F, de Silva CW (2012) Recent advances in mems sensor technology-biomedical applications. IEEE Instrum Meas Mag 15(1):8–14. https://doi.org/10.1109/MIM.2012.6145254CrossRef

Kumar S, Rathore PK, Panwar BS et al (2018) Development of a current mirror-integrated pressure sensor using cmos-mems cofabrication techniques. Microelectron Int 35(4):203–210. https://doi.org/10.1108/MI-05-2017-0022CrossRef

Kumar S, Ropmay GD, Rathore PK et al (2020) Fabrication and testing of pmos current mirror-integrated mems pressure transducer. Sens Rev 40(2):141–151. https://doi.org/10.1108/SR-07-2019-0182CrossRef

Kumar S, Ropmay GD, Rathore PK et al (2021) Design and simulation of a novel dual current mirror based cmos-mems integrated pressure sensor. IET Sci Meas Technol 15(3):268–278. https://doi.org/10.1049/smt2.12028CrossRef

Kurmendra Kumar R (2019) Mems based cantilever biosensors for cancer detection using potential bio-markers present in vocs: a survey. Microsyst Technol 25(9):3253–3267. https://doi.org/10.1007/s00542-019-04326-1CrossRef

Li KW, Yen YK (2019) Gentamicin drug monitoring for peritonitis patients by using a cmos-biomems-based microcantilever sensor. Biosens Bioelectron 130:420–426CrossRef

Liu S, Wang DF, Maeda R (2022) Highly sensitive mass sensing scheme via energy relocalization with a coupled three-beam array. IEEE Sens J 22(19):18400–18408CrossRef

Meinel K, Stoeckel C, Melzer M et al (2020) Piezoelectric scanning micromirror with built-in sensors based on thin film aluminum nitride. IEEE Sens J 21(8):9682–9689CrossRef

Naresh V, Lee N (2021) A review on biosensors and recent development of nanostructured materials-enabled biosensors. Sensors 21(4):1109. https://doi.org/10.3390/s21041109CrossRef

Pandiyan P, Uma G, Umapathy M, et al (2014) Sensitivity improvement of resonant sensor with pid controller. In: Proceedings of the 2014 IEEE students’ technology symposium, IEEE, pp 170–175

Pinto RM, Brito P, Chu V et al (2019) Thin-film silicon mems for dynamic mass sensing in vacuum and air: Phase noise, allan deviation, mass sensitivity and limits of detection. J Microelectromech Syst 28(3):390–400. https://doi.org/10.1109/JMEMS.2019.2911666CrossRef

Ramirez J, Fruett F (2018) Comparison between p-type and n-type silicon piezotransducers fabricated in cmos technology. Centro Universitario da FEI, Tech. rep

Rathore PK, Panwar BS, Akhtar J (2015) A novel cmos-mems integrated pressure sensing structure based on current mirror sensing technique. Microelectron Int 32(2):81–95. https://doi.org/10.1108/MI-11-2014-0048CrossRef

Ravindran A, Gandhi U, Mangalanathan U, et al (2016) Sensitivity enhancement of resonant sensor using output feedback control. In: 3rd International conference on electrical, electronics, engineering trends, communication, optimization and sciences (EEECOS 2016), pp 1–6, https://doi.org/10.1049/cp.2016.1520

Rotake D, Darji A, Kale N (2020) Fabrication, calibration, and preliminary testing of microcantilever-based piezoresistive sensor for biomems applications. IET Nanobiotechnol 14(5):357–368. https://doi.org/10.1049/iet-nbt.2019.0277CrossRef

Satish C, Girija B, Zumair K, et al (2016) Design of portable electronic instrument for detection of urea in milk by fabrication of urea sensor using zno nanoparticles. In: 2016 IEEE international conference on recent trends in electronics, information & communication technology (RTEICT), IEEE, pp 2120–2124

Sedra AS, Smith KC (2004) Microelectronic Circuits, 5th edn. Oxford University Press

Setiono A, Bertke M, Nyang’au WO et al (2020) In-plane and out-of-plane mems piezoresistive cantilever sensors for nanoparticle mass detection. Sensors 20(3):618. https://doi.org/10.3390/s20030618CrossRef

Shekhawat G, Tark SH, Dravid VP (2006) Mosfet-embedded microcantilevers for measuring deflection in biomolecular sensors. Science 311(5767):1592–1595. https://doi.org/10.1126/science.1122588CrossRef

Singh P, Miao J, Shao L et al (2011) Microcantilever sensors with embedded piezoresistive transistor read-out: Design and characterization. Sens Actuators, A 171(2):178–185. https://doi.org/10.1016/j.sna.2011.08.012CrossRef

Singh AK, Pandey A, Chakrabarti P (2020) Fabrication, characterization, and application of cuo nano wires as electrode for ammonia sensing in aqueous environment using extended gate-fet. IEEE Sens J 21(5):5779–5786CrossRef

Takeda M (2001) Applications of mems to industrial inspection. In: Technical Digest. MEMS 2001. 14th IEEE international conference on micro electro mechanical systems (Cat. No. 01CH37090), IEEE, pp 182–191, https://doi.org/10.1109/MEMSYS.2001.906510

Wolde W, Gupta P (2021) The design and simulation of a mosfet-based mems pressure sensor using an integrated simulation approach. J Comput Electron 20:1387–1399. https://doi.org/10.1007/s10825-021-01680-0CrossRef

Xu F, Wei Y, Bian S et al (2020) Simulation-based design and optimization of rectangular micro-cantilever-based aerosols mass sensor. Sensors 20(3):626. https://doi.org/10.3390/s20030626CrossRef

Yen YK, Lai CY (2020) Portable real-time detection of pb (ii) using a cmos mems-based nanomechanical sensing array modified with pedot: Pss. Nanomaterials 10(12):2454CrossRef

Yuan W (2017) Development and application of high-end aerospace mems. Front Mech Eng 12(4):567–573. https://doi.org/10.1007/s11465-017-0424-3CrossRef

Zimmermann M, Volden T, Kirstein KU et al (2008) A cmos-based integrated-system architecture for a static cantilever array. Sens Actuators, B Chem 131(1):254–264. https://doi.org/10.1016/j.snb.2007.11.016CrossRef

Titel: A conceptual study on novel current mirror integrated cantilever (CMIC) mass sensor for micro-gram (g) range sensing applications
verfasst von: Menuvolu Tetseo
Kalpana Gogoi
Shashi Kumar
Gaurav Kumar
Peesapati Rangababu
Akhilrendra Pratap Singh
Pradeep Kumar Rathore
Publikationsdatum: 18.01.2024
Verlag: Springer Berlin Heidelberg
Erschienen in: Microsystem Technologies / Ausgabe 3/2024
Print ISSN: 0946-7076
Elektronische ISSN: 1432-1858
DOI: https://doi.org/10.1007/s00542-023-05594-8

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Internationaler Motorenkongress/© [M] ATZlive | Chisnikov / Fotolia.com, Search Icon, Banner Hanser, Benedikt Bonnmann von Adesso/© Adesso, Teilzeit/© Fokussiert / stock.adobe.com, Hans-Joachim Lefeld/© Lucht Probst Associates GmbH, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, 2023_Antrieb/© supervisuell, ATZ-Webinar: Prototypenfreie Entwicklung durch Offline- und Driver-in-the-Loop-HiL-Tests /© (c) VI-grade, chassis.tech plus 2023/© [M] ATZlive / TÜV SÜD PRODUCT SERVICE GMBH

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2024

Development of gas sensor devices incorporating Ni–Cr LDH/TiO2 through synthesis, characterization, and fabrication processes

Role of technological innovation in vision achievement and organizational excellence

Fatigue lifetime evaluation of polysilicon thin films by using cyclic loading with gradually increasing amplitude

High speed universal NAND gate based on weakly coupled RF MEMS resonators

CMUT cavity pressure measurement using an atomic force microscope

Electret vibration energy harvesters with symmetrically configured curved-beam hinges

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.