Skip to main content
Erschienen in: Journal of Electronic Testing 3/2011

01.06.2011

A Parallel Tester Architecture for Accelerometer and Gyroscope MEMS Calibration and Test

verfasst von: Lyl M. Ciganda Brasca, Paolo Bernardi, Matteo Sonza Reorda, Dimitri Barbieri, Luciano Bonaria, Roberto Losco, Luciano Marcigot, Maurizio Straiotto

Erschienen in: Journal of Electronic Testing | Ausgabe 3/2011

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This paper describes a tester architecture for Accelerometer and Gyroscope Micro-ElectroMechanical System (MEMS) devices test and calibration, allowing increased parallelism rate and process accuracy. The proposed tester architecture tackles some critical issues related to MEMS testing, such as mitigating mechanical concerns that potentially impact on the equipment Mean Time Between Maintenance and guaranteeing a sufficient number of measurements in the time unit. The proposed strategy consists in an innovative and low cost tester resource partitioning that overcomes current limitations to multisite Accelerometer and Gyroscope MEMS testing. A tester prototype was implemented exploiting FPGAs; feasibility and effectiveness of the proposed methodology was demonstrated on commercial accelerometer and gyroscope MEMS devices.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Weitere Produktempfehlungen anzeigen
Literatur
3.
Zurück zum Zitat Charlot B, Mir S, Parrain F, Courtois B (2001) Electrically induced stimuli for MEMS self-test. VTS Proc 2001:210–215 Charlot B, Mir S, Parrain F, Courtois B (2001) Electrically induced stimuli for MEMS self-test. VTS Proc 2001:210–215
4.
Zurück zum Zitat Chatfield AB (1997) Fundamentals of high accuracy inertial navigation. AIAA, Progress in Astronautics and Aeronautics Series, 174 Chatfield AB (1997) Fundamentals of high accuracy inertial navigation. AIAA, Progress in Astronautics and Aeronautics Series, 174
5.
Zurück zum Zitat Cheng H, Zhao Y, Qiang B, Liu Y (2009) Design of testing system for accelerometer based on GP-IB. ICEMI 2009:2–548–2–551. Cheng H, Zhao Y, Qiang B, Liu Y (2009) Design of testing system for accelerometer based on GP-IB. ICEMI 2009:2–548–2–551.
6.
Zurück zum Zitat Ciganda L, Abate F, Bernardi P, Bruno M, Sonza Reorda M (2009) An enhanced FPGA-based low-cost tester platform exploiting effective test data compression for SoCs. DDECS 258–263 Ciganda L, Abate F, Bernardi P, Bruno M, Sonza Reorda M (2009) An enhanced FPGA-based low-cost tester platform exploiting effective test data compression for SoCs. DDECS 258–263
11.
Zurück zum Zitat Farahani H, Mills JK, Cleghorn WL (2009) Design, fabrication and analysis of micromachined high sensitivity and 0% cross-axis sensitivity capacitive accelerometers. Microsyst Technol 15:1815–1826. doi:10.1007/s00542-009-0895-1 CrossRef Farahani H, Mills JK, Cleghorn WL (2009) Design, fabrication and analysis of micromachined high sensitivity and 0% cross-axis sensitivity capacitive accelerometers. Microsyst Technol 15:1815–1826. doi:10.​1007/​s00542-009-0895-1 CrossRef
12.
Zurück zum Zitat Gyro and Accelerometer Panel of the IEEE Aerospace and Electronic Systems Society (2005) IEEE Standard Specification Format Guide and Test Procedure for Single-Degree-of-Freedom Rate-Integrating Gyros. IEEE Std 517™-1974(R2005), United States of America Gyro and Accelerometer Panel of the IEEE Aerospace and Electronic Systems Society (2005) IEEE Standard Specification Format Guide and Test Procedure for Single-Degree-of-Freedom Rate-Integrating Gyros. IEEE Std 517™-1974(R2005), United States of America
13.
Zurück zum Zitat Gyro and Accelerometer Panel of the IEEE Aerospace and Electronic Systems Society (2008) IEEE standard specification format guide and test procedure for linear single-axis, Nongyroscopic Accelerometers. IEEE Std 1293™-1998 (R2008), United States of America Gyro and Accelerometer Panel of the IEEE Aerospace and Electronic Systems Society (2008) IEEE standard specification format guide and test procedure for linear single-axis, Nongyroscopic Accelerometers. IEEE Std 1293™-1998 (R2008), United States of America
14.
Zurück zum Zitat Haipeng L, Shiqiao G, Xinjian L, Lei J (2009) Performance analysis and measurement of micro-machined gyroscope. ICEMI 2009:1–30–1–34. Haipeng L, Shiqiao G, Xinjian L, Lei J (2009) Performance analysis and measurement of micro-machined gyroscope. ICEMI 2009:1–30–1–34.
15.
Zurück zum Zitat Ramadoss R, Dean R, Xiong X (2008) MEMS testing. In: Wang LT, Stroud CE, Touba NA (eds) System-on-chip test architectures: nanometer design for testability, 1st edn. Elsevier Inc, Burlington, pp 591–646CrossRef Ramadoss R, Dean R, Xiong X (2008) MEMS testing. In: Wang LT, Stroud CE, Touba NA (eds) System-on-chip test architectures: nanometer design for testability, 1st edn. Elsevier Inc, Burlington, pp 591–646CrossRef
16.
Zurück zum Zitat Robin L (2009) MEMS Accelerometer, Gyroscope and IMU market 2008–2013. Yole Déeveloppment rep 2009 Robin L (2009) MEMS Accelerometer, Gyroscope and IMU market 2008–2013. Yole Déeveloppment rep 2009
18.
Zurück zum Zitat Skvortzov V, Yong Chul Cho, Byeung-Leu1 Lee, Cimoo Song (2004) Development of a Gyro Test System at Samsung Advanced Institute of Technology. PLANS 133–142 Skvortzov V, Yong Chul Cho, Byeung-Leu1 Lee, Cimoo Song (2004) Development of a Gyro Test System at Samsung Advanced Institute of Technology. PLANS 133–142
19.
Zurück zum Zitat Xiong X, Wu YL, Jone WB (2005) A dual-mode built-in self-test technique for capacitive MEMS Devices. IEEE Transactions on Instrumentation and Measurement 54(5):1739–1750CrossRef Xiong X, Wu YL, Jone WB (2005) A dual-mode built-in self-test technique for capacitive MEMS Devices. IEEE Transactions on Instrumentation and Measurement 54(5):1739–1750CrossRef
20.
Zurück zum Zitat Zhiyuan L, Jianqing Z (2009) A dynamic balance testing framework for gyroscope based on embedded system. AICI 3:573–577 Zhiyuan L, Jianqing Z (2009) A dynamic balance testing framework for gyroscope based on embedded system. AICI 3:573–577
Metadaten
Titel
A Parallel Tester Architecture for Accelerometer and Gyroscope MEMS Calibration and Test
verfasst von
Lyl M. Ciganda Brasca
Paolo Bernardi
Matteo Sonza Reorda
Dimitri Barbieri
Luciano Bonaria
Roberto Losco
Luciano Marcigot
Maurizio Straiotto
Publikationsdatum
01.06.2011
Verlag
Springer US
Erschienen in
Journal of Electronic Testing / Ausgabe 3/2011
Print ISSN: 0923-8174
Elektronische ISSN: 1573-0727
DOI
https://doi.org/10.1007/s10836-011-5210-2

Weitere Artikel der Ausgabe 3/2011

Journal of Electronic Testing 3/2011 Zur Ausgabe

EditorialNotes

Guest Editorial

Neuer Inhalt