nach oben

Erschienen in:

06.05.2019

A Planar Biaxial Experiment Platform for In Situ High-Energy Diffraction Studies

verfasst von: G. M. Hommer, J.-S. Park, Z. D. Brunson, J. Dahal, P. Kenesei, A. Mashayekhi, J. D. Almer, J. Vignes, S. R. Lemmer, B. Clausen, D. W. Brown, A. P. Stebner

Erschienen in: Experimental Mechanics | Ausgabe 5/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

An experimental platform for multiscale studies of materials subjected to plane stress loads is presented. Coupling with far-field high-energy diffraction microscopy for grain-by-grain measurements of elastic strains and rotations provides an additional benefit; it enables the direct assessment of elastic vs. inelastic deformation of the gauge sections of cruciform specimens subjected to plane stress loadings, without any a priori assumptions of the form of constitutive relationships, resolving a long-outstanding challenge of multiaxial mechanical testing. Specifically, a planar biaxial mechanical load frame with four independent hydraulic actuators capable of applying arbitrary loading paths and ratios of tension and compression was designed and built for in situ diffraction experimentation. The load frame is integrated for use at the Argonne National Laboratory Advanced Photon Source (APS) synchrotron, Sector 1, 1-ID-E endstation and the Los Alamos Neutron Science Center (LANSCE) spallation neutron source, Spectrometer for Materials Research at Temperature and Stress (SMARTS) instrument. Cruciform specimen geometries were designed to experience loading ratios in the gauges commensurate with those applied at the grips, and to minimize interference with diffracted X-rays and neutrons. The finite element models used to design the cruciform specimen geometries were experimentally validated using stereo digital image correlation measurements. This complete planar biaxial in situ diffraction platform provides a new capability for studying multiaxial micromechanics of crystalline materials (e.g., elastic, slip, twinning, phase transformation) and their dependencies on grain size, location, texture, and neighborhood characteristics.

Vorheriger Artikel Quasi-Static and High Strain Rate Simple Shear Characterization of Soft Polymers

Nächster Artikel Novel Capability for Microscale In-situ Imaging of Temperature and Deformation Fields under Dynamic Loading

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Aydıner CC, Bernier JV, Clausen B, Lienert U, Tomé CN, Brown DW (2009) Evolution of stress in individual grains and twins in a magnesium alloy aggregate. Phys Rev B 80. https://doi.org/10.1103/PhysRevB.80.024113

Balogh L, Ribárik G, Ungár T (2006) Stacking faults and twin boundaries in fcc crystals determined by x-ray diffraction profile analysis. J Appl Phys 100:023512. https://doi.org/10.1063/1.2216195 CrossRef

Benafan O, Ii SAP, Noebe RD, Sisneros TA, Vaidyanathan R (2012) Role of B19′ martensite deformation in stabilizing two-way shape memory behavior in NiTi. J Appl Phys 112:093510. https://doi.org/10.1063/1.4764313 CrossRef

Bernier JV, Barton NR, Lienert U, Miller MP (2011) Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysis. J Strain Anal Eng Des 46:527–547. https://doi.org/10.1177/0309324711405761 CrossRef

Djaziri S, Faurie D, Renault P-O, Le Bourhis E, Goudeau P, Geandier G, Thiaudière D (2013) Yield surface of polycrystalline thin films as revealed by non-equibiaxial loadings at small deformation. Acta Mater 61:5067–5077. https://doi.org/10.1016/j.actamat.2013.04.031 CrossRef

Pagan DC, Miller MP (2014) Connecting heterogeneous single slip to diffraction peak evolution in high-energy monochromatic X-ray experiments. J Appl Crystallogr 47:887–898. https://doi.org/10.1107/S1600576714005779 CrossRef

Robertson SW, Mehta A, Pelton AR, Ritchie RO (2007) Evolution of crack-tip transformation zones in superelastic Nitinol subjected to in situ fatigue: A fracture mechanics and synchrotron X-ray microdiffraction analysis. Acta Mater 55:6198–6207. https://doi.org/10.1016/j.actamat.2007.07.028 CrossRef

Sharma H, Huizenga RM, Offerman SE (2012) A fast methodology to determine the characteristics of thousands of grains using three-dimensional X-ray diffraction. I. Overlapping diffraction peaks and parameters of the experimental setup. J Appl Crystallogr 45:693–704. https://doi.org/10.1107/S0021889812025563 CrossRef

Sharma H, Huizenga RM, Offerman SE (2012) A fast methodology to determine the characteristics of thousands of grains using three-dimensional X-ray diffraction. II. Volume, centre-of-mass position, crystallographic orientation and strain state of grains. J Appl Crystallogr 45:705–718. https://doi.org/10.1107/S0021889812025599 CrossRef

10.

Stebner AP, Vogel SC, Noebe RD, Sisneros TA, Clausen B, Brown DW, Garg A, Brinson LC (2013) Micromechanical quantification of elastic, twinning, and slip strain partitioning exhibited by polycrystalline, monoclinic nickel–titanium during large uniaxial deformations measured via in-situ neutron diffraction. J Mech Phys Solids 61:2302–2330. https://doi.org/10.1016/j.jmps.2013.05.008 CrossRef

11.

Bollenrath F, Hauk V, Müller EH (1966) Berechnung der vielkristallinen röntgenographischen Elastizitätskonstanten des Zweiphasen-Werkstoffes α−/β-Messing. J Soc Mater Sci Jpn 15:244–246. https://doi.org/10.2472/jsms.15.244 CrossRef

12.

Kröner E (1958) Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls. Z Für Phys 151:504–518. https://doi.org/10.1007/BF01337948 CrossRef

13.

Hutchings MT, Withers PJ, Holden TM, Lorentzen T (2005) Introduction to the Characterization of Residual Stress by Neutron Diffraction. CRC Press, Boca RatonCrossRef

14.

Noyan IC, Cohen JB (2013) Residual Stress: Measurement by Diffraction and Interpretation. Springer, Berlin

15.

Stebner AP, Brown DW, Brinson LC (2013) Measurement of elastic constants of monoclinic nickel-titanium and validation of first principles calculations. Appl Phys Lett 102:211908. https://doi.org/10.1063/1.4808040 CrossRef

16.

Stebner AP, Brown DW, Brinson LC (2013) Young’s modulus evolution and texture-based elastic–inelastic strain partitioning during large uniaxial deformations of monoclinic nickel–titanium. Acta Mater 61:1944–1956. https://doi.org/10.1016/j.actamat.2012.12.015 CrossRef

17.

Matthies S, Priesmeyer HG, Daymond MR (2001) On the diffractive determination of single-crystal elastic constants using polycrystalline samples. J Appl Crystallogr 34:585–601. https://doi.org/10.1107/S0021889801010482 CrossRef

18.

Daymond MR (2004) The determination of a continuum mechanics equivalent elastic strain from the analysis of multiple diffraction peaks. J Appl Phys 96:4263–4272. https://doi.org/10.1063/1.1794896 CrossRef

19.

Howard CJ, Kisi EH (1999) Measurement of single-crystal elastic constants by neutron diffraction from polycrystals. J Appl Crystallogr 32:624–633CrossRef

20.

Hutchinson JW, Tvergaard V (1981) Shear band formation in plane strain. Int J Solids Struct 17:451–470. https://doi.org/10.1016/0020-7683(81)90053-6 CrossRefMATH

21.

Kuroda M, Tvergaard V (2000) Forming limit diagrams for anisotropic metal sheets with different yield criteria. Int J Solids Struct 37:5037–5059. https://doi.org/10.1016/S0020-7683(99)00200-0 CrossRefMATH

22.

Kuroda M, Tvergaard V (2000) Effect of strain path change on limits to ductility of anisotropic metal sheets. Int J Mech Sci 42:867–887. https://doi.org/10.1016/S0020-7403(99)00029-6 CrossRefMATH

23.

Kuwabara T, Kuroda M, Tvergaard V, Nomura K (2000) Use of abrupt strain path change for determining subsequent yield surface: experimental study with metal sheets. Acta Mater 48:2071–2079. https://doi.org/10.1016/S1359-6454(00)00048-3 CrossRef

24.

Tvergaard V (1978) Effect of kinematic hardening on localized necking in biaxially stretched sheets. Int J Mech Sci 20:651–658. https://doi.org/10.1016/0020-7403(78)90023-1 CrossRefMATH

25.

Needleman A, Tvergaard V (1977) Necking of biaxially stretched elastic-plastic circular plates. J Mech Phys Solids 25:159–183. https://doi.org/10.1016/0022-5096(77)90021-7 CrossRefMATH

26.

Ghosh AK, Backofen WA (1973) Strain hardening and instability in biaxially streched sheets. Metall Trans A 4:1113–1123. https://doi.org/10.1007/BF02645615 CrossRef

27.

Azrin M, Backofen WA (1970) The deformation and failure of a biaxially stretched sheet. Metall Trans A 1:2857–2865. https://doi.org/10.1007/BF03037824 CrossRef

28.

Abeyaratne R, Chu C, James RD (1996) Kinetics of materials with wiggly energies: Theory and application to the evolution of twinning microstructures in a Cu-Al-Ni shape memory alloy. Philos Mag A 73:457–497. https://doi.org/10.1080/01418619608244394 CrossRef

29.

Imbeni, V., Mehta, A., Robertson, S.W., Duerig, T.W., Pelton, A., Ritchie, R.O. (2003) On the mechanical behavior of Nitinol under multiaxial loading conditions and in situ synchrotron x-ray. In: SMST-2003: proceedings of the international conference on shape memory and superelastic technologies. ASM International, International Organization on SMST Pacific Grove, CA, pp 267–276

30.

Wang X-L, Holden TM, Rennich GQ, Stoica AD, Liaw PK, Choo H, Hubbard CR (2006) VULCAN—The engineering diffractometer at the SNS. Phys B Condens Matter 385–386. Part 1:673–675. https://doi.org/10.1016/j.physb.2006.06.103 CrossRef

31.

Woracek R, Bunn JR, Penumadu D, Hubbard CR (2012) Method to determine hkl strains and shear moduli under torsion using neutron diffraction. Appl Phys Lett 100:191904. https://doi.org/10.1063/1.4712043 CrossRef

32.

Martins RV, Lienert U, Margulies L, Pyzalla A (2005) Determination of the radial crystallite microstrain distribution within an AlMg3 torsion sample using monochromatic synchrotron radiation. Mater Sci Eng A 402:278–287. https://doi.org/10.1016/j.msea.2005.04.005 CrossRef

33.

Iadicola MA, Creuziger AA, Foecke T (2014) Advanced Biaxial Cruciform Testing at the NIST Center for Automotive Lightweighting. In: Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 8. Springer, pp 277–285

34.

Banerjee D, Iadicola M, Creuziger A, Foecke T (2016) An Experimental and Numerical Study of Deformation Behavior of Steels in Biaxial Tensile Tests. In: TMS 2015 144th Annual Meeting & Exhibition. Springer International Publishing, pp 279–288

35.

Iadicola MA, Foecke T, Banovic SW (2008) Experimental observations of evolving yield loci in biaxially strained AA5754-O. Int J Plast 24:2084–2101. https://doi.org/10.1016/j.ijplas.2008.03.003 CrossRefMATH

36.

Jeong Y, Gnäupel-Herold T, Barlat F, Iadicola M, Creuziger A, Lee M-G (2015) Evaluation of biaxial flow stress based on elasto-viscoplastic self-consistent analysis of X-ray diffraction measurements. Int J Plast 66:103–118. https://doi.org/10.1016/j.ijplas.2014.06.009 CrossRef

37.

Iadicola MA, Gnäupel-Herold TH (2012) Effective X-ray elastic constant measurement for in situ stress measurement of biaxially strained AA5754-O. Mater Sci Eng A 545:168–175. https://doi.org/10.1016/j.msea.2012.02.100 CrossRef

38.

Chatterjee K, Venkataraman A, Garbaciak T, Rotella J, Sangid MD, Beaudoin AJ, Kenesei P, Park J-S, Pilchak AL (2016) Study of grain-level deformation and residual stresses in Ti-7Al under combined bending and tension using high energy diffraction microscopy (HEDM). Int J Solids Struct 94–95:35–49. https://doi.org/10.1016/j.ijsolstr.2016.05.010 CrossRef

39.

Chatterjee K, Ko JYP, Weiss JT, Philipp HT, Becker J, Purohit P, Gruner SM, Beaudoin AJ (2017) Study of residual stresses in Ti-7Al using theory and experiments. J Mech Phys Solids 109:95–116. https://doi.org/10.1016/j.jmps.2017.08.008 CrossRef

40.

Geandier G, Thiaudière D, Randriamazaoro RN, Chiron R, Djaziri S, Lamongie B, Diot Y, Bourhis EL, Renault PO, Goudeau P, Bouaffad A, Castelnau O, Faurie D, Hild F (2010) Development of a synchrotron biaxial tensile device for in situ characterization of thin films mechanical response. Rev Sci Instrum 81:103903. https://doi.org/10.1063/1.3488628 CrossRef

41.

Linss V, Halm T, Hoyer W, Richter F, Schell N (2003) Analysis of the biaxial strain state of Al-doped c-BN films using diffraction experiments with synchrotron radiation. Vacuum 70:1–9. https://doi.org/10.1016/S0042-207X(02)00205-1 CrossRef

42.

Tasan CC, Hoefnagels JPM, Dekkers ECA, Geers MGD (2011) Multi-Axial Deformation Setup for Microscopic Testing of Sheet Metal to Fracture. Exp Mech 52:669–678. https://doi.org/10.1007/s11340-011-9532-x CrossRef

43.

Petegem SV, Guitton A, Dupraz M, Bollhalder A, Sofinowski K, Upadhyay MV, Swygenhoven HV (2017) A Miniaturized Biaxial Deformation Rig for in Situ Mechanical Testing. Exp Mech 57:569–580. https://doi.org/10.1007/s11340-016-0244-0 CrossRef

44.

Hsu W-N, Polatidis E, Šmíd M, Casati N, Van Petegem S, Van Swygenhoven H (2018) Load path change on superelastic NiTi alloys: In situ synchrotron XRD and SEM DIC. Acta Mater 144:874–883. https://doi.org/10.1016/j.actamat.2017.11.035 CrossRef

45.

Van Petegem S, Wagner J, Panzner T, Upadhyay MV, Trang TTT, Van Swygenhoven H (2016) In-situ neutron diffraction during biaxial deformation. Acta Mater 105:404–416. https://doi.org/10.1016/j.actamat.2015.12.015 CrossRef

46.

Repper J, Niffenegger M, van Petegem S, Wagner W, van Swygenhoven H (2013) In-Situ Biaxial Mechanical Testing at the Neutron Time-of-Flight Diffractometer POLDI. Mater Sci Forum 768(769):60–65. https://doi.org/10.4028/www.scientific.net/MSF.768-769.60 CrossRef

47.

Collins DM, Mostafavi M, Todd RI, Connolley T, Wilkinson AJ (2015) A synchrotron X-ray diffraction study of in situ biaxial deformation. Acta Mater 90:46–58. https://doi.org/10.1016/j.actamat.2015.02.009 CrossRef

48.

Marin T, Dawson PR, Gharghouri MA, Rogge RB (2008) Diffraction measurements of elastic strains in stainless steel subjected to in situ biaxial loading. Acta Mater 56:4183–4199. https://doi.org/10.1016/j.actamat.2008.04.048 CrossRef

49.

Poshadel AC, Gharghouri M, Dawson PR (2017) Initiation and Propagation of Plastic Yielding in Duplex Stainless Steel. ArXiv170706857 Cond-Mat

50.

Ice GE, Larson BC, Tischler JZ, Liu W, Yang W (2005) X-ray microbeam measurements of subgrain stress distributions in polycrystalline materials. Mater Sci Eng A 399:43–48. https://doi.org/10.1016/j.msea.2005.02.035 CrossRef

51.

Tamura N, Chung J-S, Ice GE, Larson BC, Budai JD, Tischler JZ, Yoon M (1999) Strain and Texture in Al-Interconnect Wires Measured by X-Ray Microbeam Diffraction. MRS Online Proc Libr Arch 563. https://doi.org/10.1557/PROC-563-175

52.

Budiman AS, Han S-M, Li N, Wei Q-M, Dickerson P, Tamura N, Kunz M, Misra A (2012) Plasticity in the nanoscale Cu/Nb single-crystal multilayers as revealed by synchrotron Laue x-ray microdiffraction. J Mater Res 27:599–611. https://doi.org/10.1557/jmr.2011.421 CrossRef

53.

Lisowski PW (2003) Basic and Applied Research at the Los Alamos Neutron Science Center. In: AIP Conference Proceedings. AIP, Denton, Texas (USA), pp 953–955

54.

Mansur LK (2003) Materials research and development for the spallation neutron source mercury target. J Nucl Mater 318:14–25. https://doi.org/10.1016/S0022-3115(03)00075-8 CrossRef

55.

Nico JS, Arif M, Dewey MS, Gentile TR, Gilliam DM, Huffman PR, Jacobson DL, Thompson AK (2005) The Fundamental Neutron Physics Facilities at NIST. J Res Natl Inst Stand Technol 110:137–144CrossRef

56.

Stuhr U, Grosse M, Wagner W (2006) The TOF-strain scanner POLDI with multiple frame overlap—concept and performance. Mater Sci Eng A 437:134–138. https://doi.org/10.1016/j.msea.2006.04.069 CrossRef

57.

Agnew SR, Tomé CN, Brown DW, Holden TM, Vogel SC (2003) Study of slip mechanisms in a magnesium alloy by neutron diffraction and modeling. Scr Mater 48:1003–1008. https://doi.org/10.1016/S1359-6462(02)00591-2 CrossRef

58.

Brown DW, Bourke MAM, Tomé CN, Varma R, Holden TM, Clausen B (2003) A neutron diffraction and modeling study of uniaxial deformation in polycrystalline beryllium. Metall Mater Trans A 34:1439–1449. https://doi.org/10.1007/s11661-003-0256-0 CrossRef

59.

Agnew SR, Brown DW, Tomé CN (2006) Validating a polycrystal model for the elastoplastic response of magnesium alloy AZ31 using in situ neutron diffraction. Acta Mater 54:4841–4852. https://doi.org/10.1016/j.actamat.2006.06.020 CrossRef

60.

Šittner P, Lukáš P, Novák V, Daymond MR, Swallowe GM (2004) In situ neutron diffraction studies of martensitic transformations in NiTi polycrystals under tension and compression stress. Mater Sci Eng A 378:97–104. https://doi.org/10.1016/j.msea.2003.09.112 CrossRef

61.

Yan K, Carr DG, Kabra S, Reid M, Studer A, Harrison RP, Dippenaar R, Liss K-D (2011) In Situ Characterization of Lattice Structure Evolution during Phase Transformation of Zr-2.5Nb. Adv Eng Mater 13:882–886. https://doi.org/10.1002/adem.201000350 CrossRef

62.

Ungár T, Balogh L, Ribárik G (2010) Defect-Related Physical-Profile-Based X-Ray and Neutron Line Profile Analysis. Metall Mater Trans A 41:1202–1209. https://doi.org/10.1007/s11661-009-9961-7 CrossRef

63.

Balogh L, Brown DW, Mosbrucker P, Long F, Daymond MR (2012) Dislocation structure evolution induced by irradiation and plastic deformation in the Zr–2.5Nb nuclear structural material determined by neutron diffraction line profile analysis. Acta Mater 60:5567–5577. https://doi.org/10.1016/j.actamat.2012.06.062 CrossRef

64.

Tremsin AS, Kockelmann W, Kelleher JF, Paradowska AM, Ramadhan RS, Fitzpatrick ME (2018) Energy-Resolved Neutron Imaging for Reconstruction of Strain Introduced by Cold Working. J Imaging 4:48. https://doi.org/10.3390/jimaging4030048 CrossRef

65.

Kockelmann W, Minniti T, Pooley DE, Burca G, Ramadhan R, Akeroyd FA, Howells GD, Moreton-Smith C, Keymer DP, Kelleher J, Kabra S, Lee TL, Ziesche R, Reid A, Vitucci G, Gorini G, Micieli D, Agostino RG, Formoso V, Aliotta F, Ponterio R, Trusso S, Salvato G, Vasi C, Grazzi F, Watanabe K, Lee JWL, Tremsin AS, McPhate JB, Nixon D, Draper N, Halcrow W, Nightingale J (2018) Time-of-Flight Neutron Imaging on IMAT@ISIS: A New User Facility for Materials Science. J Imaging 4:47. https://doi.org/10.3390/jimaging4030047 CrossRef

66.

Sato H (2017) Deriving Quantitative Crystallographic Information from the Wavelength-Resolved Neutron Transmission Analysis Performed in Imaging Mode. J Imaging 4:7. https://doi.org/10.3390/jimaging4010007 CrossRef

67.

Poulsen HF (2004) Three-Dimensional X-Ray Diffraction Microscopy: Mapping Polycrystals and Their Dynamics. Springer Science & Business Media, BerlinCrossRef

68.

Lienert U, Li SF, Hefferan CM, Lind J, Suter RM, Bernier JV, Barton NR, Brandes MC, Mills MJ, Miller MP, Jakobsen B, Pantleon W (2011) High-energy diffraction microscopy at the advanced photon source. JOM 63:70–77. https://doi.org/10.1007/s11837-011-0116-0 CrossRef

69.

Simons H, Jakobsen AC, Ahl SR, Detlefs C, Poulsen HF (2016) Multiscale 3D characterization with dark-field x-ray microscopy. MRS Bull 41:454–459. https://doi.org/10.1557/mrs.2016.114 CrossRef

70.

Obstalecki M, Wong SL, Dawson PR, Miller MP (2014) Quantitative analysis of crystal scale deformation heterogeneity during cyclic plasticity using high-energy X-ray diffraction and finite-element simulation. Acta Mater 75:259–272. https://doi.org/10.1016/j.actamat.2014.04.059 CrossRef

71.

Efstathiou C, Boyce DE, Park J-S, Lienert U, Dawson PR, Miller MP (2010) A method for measuring single-crystal elastic moduli using high-energy X-ray diffraction and a crystal-based finite element model. Acta Mater 58:5806–5819. https://doi.org/10.1016/j.actamat.2010.06.056 CrossRef

72.

Wielewski E, Boyce DE, Park J-S, Miller MP, Dawson PR (2017) A methodology to determine the elastic moduli of crystals by matching experimental and simulated lattice strain pole figures using discrete harmonics. Acta Mater 126:469–480. https://doi.org/10.1016/j.actamat.2016.12.026 CrossRef

73.

Paranjape HM, Paul PP, Sharma H, Kenesei P, Park J-S, Duerig TW, Brinson LC, Stebner AP (2017) Influences of granular constraints and surface effects on the heterogeneity of elastic, superelastic, and plastic responses of polycrystalline shape memory alloys. J Mech Phys Solids 102:46–66. https://doi.org/10.1016/j.jmps.2017.02.007 CrossRef

74.

Bieler TR, Wang L, Beaudoin AJ, Kenesei P, Lienert U (2014) In Situ Characterization of Twin Nucleation in Pure Ti Using 3D-XRD. Metall Mater Trans A 45:109–122. https://doi.org/10.1007/s11661-013-2082-3 CrossRef

75.

Wang L, Zheng Z, Phukan H, Kenesei P, Park J-S, Lind J, Suter RM, Bieler TR (2017) Direct measurement of critical resolved shear stress of prismatic and basal slip in polycrystalline Ti using high energy X-ray diffraction microscopy. Acta Mater 132:598–610. https://doi.org/10.1016/j.actamat.2017.05.015 CrossRef

76.

Bucsek AN, Dale D, Ko JYP, Chumlyakov Y, Stebner AP (2018) Measuring stress-induced martensite microstructures using far-field high-energy diffraction microscopy. Acta Crystallogr Sect Found Adv 74:425–446. https://doi.org/10.1107/S205327331800880X CrossRef

77.

Paranjape HM, Bowers ML, Mills MJ, Anderson PM (2017) Mechanisms for phase transformation induced slip in shape memory alloy micro-crystals. Acta Mater 132:444–454. https://doi.org/10.1016/j.actamat.2017.04.066 CrossRef

78.

Paranjape HM, Paul PP, Amin-Ahmadi B, Sharma H, Dale D, Ko JYP, Chumlyakov YI, Brinson LC, Stebner AP (2018) In situ, 3D characterization of the deformation mechanics of a superelastic NiTi shape memory alloy single crystal under multiscale constraint. Acta Mater 144:748–757. https://doi.org/10.1016/j.actamat.2017.11.026 CrossRef

79.

Rovinelli A, Sangid MD, Proudhon H, Ludwig W (2018) Using machine learning and a data-driven approach to identify the small fatigue crack driving force in polycrystalline materials. Npj Comput Mater 4:35. https://doi.org/10.1038/s41524-018-0094-7 CrossRef

80.

Chester SA, Bernier JV, Barton NR, Balogh L, Clausen B, Edmiston JK (2016) Direct numerical simulation of deformation twinning in polycrystals. Acta Mater 120:348–363. https://doi.org/10.1016/j.actamat.2016.08.054 CrossRef

81.

Sedmák P, Pilch J, Heller L, Kopeček J, Wright J, Sedlák P, Frost M, Šittner P (2016) Grain-resolved analysis of localized deformation in nickel-titanium wire under tensile load. Science 353:559–562. https://doi.org/10.1126/science.aad6700 CrossRef

82.

Berveiller S, Malard B, Wright J, Patoor E, Geandier G (2011) In situ synchrotron analysis of lattice rotations in individual grains during stress-induced martensitic transformations in a polycrystalline CuAlBe shape memory alloy. Acta Mater 59:3636–3645. https://doi.org/10.1016/j.actamat.2011.02.037 CrossRef

83.

Bucsek AN, Pagan DC, Casalena L, Chumlyakov Y, Mills MJ, Stebner AP (2018) Ferroelastic twin reorientation mechanisms in shape memory alloys elucidated with 3D X-ray microscopy. J Mech Phys Solids

84.

Bucsek AN, Casalena L, Pagan DC, Paul PP, Chumlyakov Y, Mills MJ, Stebner AP (2018) Three-dimensional in situ characterization of phase transformation induced austenite grain refinement in nickel-titanium. Scr Mater

85.

Abu-Farha F, Hector LG Jr, Khraisheh M (2009) Cruciform-shaped specimens for elevated temperature biaxial testing of lightweight materials. JOM 61:48–56CrossRef

86.

Hannon A, Tiernan P (2008) A review of planar biaxial tensile test systems for sheet metal. J Mater Process Technol 198:1–13. https://doi.org/10.1016/j.jmatprotec.2007.10.015 CrossRef

87.

Metallic materials – Sheet and strip – Biaxial tensile testing method using a cruciform test piece

88.

Hommer GM, Stebner AP (2016) Development of a Specimen for In-Situ Diffraction Planar Biaxial Experiments. In: Beese AM, Zehnder AT, Xia S (eds) Fracture, Fatigue, Failure and Damage Evolution, vol 8. Springer International Publishing, Cham, pp 45–50CrossRef

89.

Hommer, G. M., Park, J. S., Collins, P. C., Pilchak, A.L., Stebner, A. P. A New in situ Planar Biaxial Far-Field High Energy Diffraction Microscopy Experiment

90.

Cláudio RA, Reis L, Freitas M (2014) Biaxial high-cycle fatigue life assessment of ductile aluminium cruciform specimens. Theor Appl Fract Mech 73:82–90. https://doi.org/10.1016/j.tafmec.2014.08.007 CrossRef

91.

Bonnand V, Chaboche JL, Gomez P, Kanouté P, Pacou D (2011) Investigation of multiaxial fatigue in the context of turboengine disc applications. Int J Fatigue 33:1006–1016. https://doi.org/10.1016/j.ijfatigue.2010.12.018 CrossRef

92.

Turner TJ, Shade PA, Bernier JV, Li SF, Schuren JC, Lind J, Lienert U, Kenesei P, Suter RM, Blank B, Almer J (2016) Combined near- and far-field high-energy diffraction microscopy dataset for Ti-7Al tensile specimen elastically loaded in situ. Integrating Mater Manuf Innov 5. https://doi.org/10.1186/s40192-016-0048-1

93.

Dassault Systems (2013) Abaqus. In: Abaqus 613 Online Doc. http://129.97.46.200:2080/v6.13/. Accessed 1 Mar 2016

94.

Barber JR (2010) Elasticity. Springer Netherlands, DordrechtCrossRef

95.

LePage WS, Daly SH, Shaw JA (2016) Cross Polarization for Improved Digital Image Correlation. Exp Mech 56:969–985. https://doi.org/10.1007/s11340-016-0129-2 CrossRef

96.

Hommer GM (2018) EM_DIC_Report: Design and usage of an optomechanical digital image correlation system. Colorado School of Mines, Golden

97.

Correlated Solutions (2018) Vic-3D 8 Reference Manual. http://www.correlatedsolutions.com/supportcontent/VIC-3D-8-Manual.pdf. Accessed 17 Sep 2018

98.

GOM mbH (2013) ARAMIS User Manual - Software

99.

OpenCV (2018) OpenCV. https://opencv.org. Accessed 17 Sep 2018

100.

Haeffner DR, Almer JD, Lienert U (2005) The use of high energy X-rays from the Advanced Photon Source to study stresses in materials. Mater Sci Eng A 399:120–127. https://doi.org/10.1016/j.msea.2005.02.023 CrossRef

101.

Cil MB, Alshibli K, Kenesei P, Lienert U (2014) Combined high-energy synchrotron X-ray diffraction and computed tomography to characterize constitutive behavior of silica sand. Nucl Instrum Methods Phys Res Sect B Beam Interact Mater At 324:11–16. https://doi.org/10.1016/j.nimb.2013.08.043 CrossRef

102.

Alshibli K, Cil MB, Kenesei P, Lienert U (2013) Strain tensor determination of compressed individual silica sand particles using high-energy synchrotron diffraction. Granul Matter 15:517–530. https://doi.org/10.1007/s10035-013-0424-x CrossRef

103.

Demir E, Park J-S, Miller MP, Dawson PR (2013) A computational framework for evaluating residual stress distributions from diffraction-based lattice strain data. Comput Methods Appl Mech Eng 265:120–135. https://doi.org/10.1016/j.cma.2013.06.002 MathSciNetCrossRefMATH

104.

Park J-S, Lienert U, Dawson PR, Miller MP (2013) Quantifying Three-Dimensional Residual Stress Distributions Using Spatially-Resolved Diffraction Measurements and Finite Element Based Data Reduction. Exp Mech 53:1491–1507. https://doi.org/10.1007/s11340-013-9771-0 CrossRef

105.

MAM B, Dunand DC, Ustundag E (2002) SMARTS – a spectrometer for strain measurement in engineering materials. Appl Phys A Mater Sci Process 74:s1707–s1709. https://doi.org/10.1007/s003390201747 CrossRef

106.

(2011) European Powder Diffraction Conference; August 2010, Darmstadt, Germany: OLDENBOURG WISSENSCHAFTSVERLAG, München

107.

Hommer GM (2018) Mechanism of dwell fatigue crack initiation in Ti-7Al under biaxial tension-tension loads. Thesis. Colorado School of Mines. Arthur Lakes Library

108.

Advanced Photon Source MIDAS. In: MIDAS Microstruct. Imaging Using Diffr. Anal. Softw. https://www1.aps.anl.gov/science/scientific-software/midas. Accessed 1 Mar 2016

109.

McNaney J, Imbeni V, Jung Y, Papadopoulos P, Ritchie R (2003) An experimental study of the superelastic effect in a shape-memory Nitinol alloy under biaxial loading. Mech Mater 35:969–986. https://doi.org/10.1016/S0167-6636(02)00310-1 CrossRef

110.

Kelly A, Stebner AP, Bhattacharya K (2016) A micromechanics-inspired constitutive model for shape-memory alloys that accounts for initiation and saturation of phase transformation. J Mech Phys Solids 97:197–224. https://doi.org/10.1016/j.jmps.2016.02.007 MathSciNetCrossRef

111.

Patel JR, Cohen M (1953) Criterion for the action of applied stress in the martensitic transformation. Acta Metall 1:531–538. https://doi.org/10.1016/0001-6160(53)90083-2 CrossRef

112.

Rocks UF, Mecking H (2003) Physics and phenomenology of strain hardening: the FCC case. Prog Mater Sci 48:171–273CrossRef

113.

WF KOCKS (1975) Thermodynamics and kinetics of slip. Prog Mater Sci 19:291

114.

Ozturk D, Pilchak AL, Ghosh S (2017) Experimentally validated dwell and cyclic fatigue crack nucleation model for α–titanium alloys. Scr Mater 127:15–18. https://doi.org/10.1016/j.scriptamat.2016.08.031 CrossRef

115.

Cuddihy MA, Stapleton A, Williams S, Dunne FPE (2017) On cold dwell facet fatigue in titanium alloy aero-engine components. Int J Fatigue 97:177–189. https://doi.org/10.1016/j.ijfatigue.2016.11.034 CrossRef

116.

Zheng Z, Balint DS, Dunne FPE (2016) Dwell fatigue in two Ti alloys: An integrated crystal plasticity and discrete dislocation study. J Mech Phys Solids 96:411–427. https://doi.org/10.1016/j.jmps.2016.08.008 CrossRef

Titel: A Planar Biaxial Experiment Platform for In Situ High-Energy Diffraction Studies
verfasst von: G. M. Hommer
J.-S. Park
Z. D. Brunson
J. Dahal
P. Kenesei
A. Mashayekhi
J. D. Almer
J. Vignes
S. R. Lemmer
B. Clausen
D. W. Brown
A. P. Stebner
Publikationsdatum: 06.05.2019
Verlag: Springer US
Erschienen in: Experimental Mechanics / Ausgabe 5/2019
Print ISSN: 0014-4851
Elektronische ISSN: 1741-2765
DOI: https://doi.org/10.1007/s11340-019-00509-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2019

Effect of Particle Mass Fraction on the Multiscale Dynamic Failure Behavior of Particulate Polymer Composites

Novel Capability for Microscale In-situ Imaging of Temperature and Deformation Fields under Dynamic Loading

Diffraction-Assisted Light Field Microscopy for Microtomography and Digital Volume Correlation with Improved Spatial Resolution

Laser-Driven Flyers and Nanosecond-Resolved Velocimetry for Spall Studies in Thin Metal Foils

Grain Boundary Sliding and Slip Transmission in High Purity Aluminum

Quasi-Static and High Strain Rate Simple Shear Characterization of Soft Polymers

Premium Partner

Marktübersichten