nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

05.03.2020 | ORIGINAL ARTICLE

A prediction model of the extrusion deformation with residual stress on 6063 aluminum alloy aeronautical plate considering different extrusion parameters

verfasst von: Qiong Wu, Nian-Pu Xue, Yi-Du Zhang, Han-Jun Gao, Jian Wu

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 3-4/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The deformation of aluminum alloy aeronautical plate is a common problem in the processing. The machining deformation can usually be predicted by the initial residual stress in the aluminum alloy plate. In this study, a prediction model considering the extrusion parameters for predicting the machining deformation of aluminum alloy plate is proposed. The FEM simulations and experiments are conducted to validate the accuracy of the prediction model, and not only the residual stress results but also the deformation results show good agreements. In addition, the other four groups of experiments are performed to obtain the results of machining deformation under different extrusion parameters. Finally, the relationship between machining deformation and extrusion parameters is discussed. The extreme values and their positions of the deformations under different parameters are given.

Vorheriger Artikel Experimental characterization of 3D printed thermoplastic plates subjected to low velocity impact

Nächster Artikel Manufacturing of bent tubes with non-uniform curvature and cross-section using a novel hydroforming die: experimental, finite element analysis, and optimization

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Chen W, Ni L, Xue J (2008) Deformation control through fixture layout design and clamping force optimization. Int J Adv Manuf Technol 38:860–867. https://doi.org/10.1007/s00170-007-1153-2 CrossRef

Siebenaler SP, Melkote SN (2006) Prediction of workpiece deformation in a fixture system using the finite element method. Int J Mach Tools Manuf 46:51–58. https://doi.org/10.1016/j.ijmachtools.2005.04.007 CrossRef

Santos MCJ, Machado AR, Sales WF, Barrozo MAS, Ezugwu EO (2016) Machining of aluminum alloys: a review. Int J Adv Manuf Technol 86:3067–3080. https://doi.org/10.1007/s00170-016-8431-9 CrossRef

Masoudi S, Amini S, Saeidi E, Eslami-Chalander H (2015) Effect of machining-induced residual stress on the distortion of thin-walled parts. Int J Adv Manuf Technol 76:597–608. https://doi.org/10.1007/s00170-014-6281-x CrossRef

Li J, Wang S (2017) Distortion caused by residual stresses in machining aeronautical aluminum alloy parts: recent advances. Int J Adv Manuf Technol 89:997–1012. https://doi.org/10.1007/s00170-016-9066-6 CrossRef

Huang X, Sun J, Li J (2015) Finite element simulation and experimental investigation on the residual stress-related monolithic component deformation. Int J Adv Manuf Technol 77:1035–1041. https://doi.org/10.1007/s00170-014-6533-9 CrossRef

Song XM, Wang GZ, Xuan FZ, Tu ST (2015) Investigation of residual stress effects on creep crack initiation and growth using local out-of-plane compression. Eng Fract Mech 149:45–57. https://doi.org/10.1016/j.engfracmech.2015.10.002 CrossRef

Chen LY, Wang GZ, Tan JP, Xuan FZ, Tu ST (2013) Effects of residual stress on creep damage and crack initiation in notched CT specimens of a Cr-Mo-V steel. Eng Fract Mech 97:80–91. https://doi.org/10.1016/j.engfracmech.2012.10.020 CrossRef

Gao H, Zhang Y, Wu Q, Song J (2017) An analytical model for predicting the machining deformation of a plate blank considers biaxial initial residual stresses. Int J Adv Manuf Technol 93:1473–1486. https://doi.org/10.1007/s00170-017-0528-2 CrossRef

10.

Zhang L, Feng X, Li Z, Liu C (2013) FEM simulation and experimental study on the quenching residual stress of aluminum alloy 2024. Proc Inst Mech Eng Part B-J Eng Manuf 227:954–964. https://doi.org/10.1177/0954405412465232 CrossRef

11.

Tanner DA, Robinson JS (2000) Residual stress prediction and determination in 7010 aluminum alloy forgings. Exp Mech 40:75–82. https://doi.org/10.1007/BF02327551 CrossRef

12.

Wei Y, Wang XW (2007) Computer simulation and experimental study of machining deflection due to original residual stress of aerospace thin-walled parts. Int J Adv Manuf Technol 33:260–265. https://doi.org/10.1007/s00170-006-0470-1 CrossRef

13.

Dong H, Ke Y (2006) Study on machining deformation of aircraft monolithic component by FEM and experiment. Chin J Aeronaut 19:247–254. https://doi.org/10.1016/S1000-9361(11)60352-X CrossRef

14.

Cerutti X, Mocellin K (2015) Parallel finite element tool to predict distortion induced by initial residual stresses during machining of aeronautical parts. Int J Mater Form 8:255–268. https://doi.org/10.1007/s12289-014-1164-0 CrossRef

15.

Liu L, Sun J, Chen W, Sun P (2017) Study on the machining distortion of aluminum alloy parts induced by forging residual stresses. Proc Inst Mech Eng Part B-J Eng Manuf 231:618–627. https://doi.org/10.1177/0954405415583805 CrossRef

16.

Nasr MNA, Ng EG, Elbestawi MA (2008) A modified time-efficient FE approach for predicting machining-induced residual stresses. Finite Elem Anal Des 44:149–161. https://doi.org/10.1016/j.finel.2007.11.005 CrossRef

17.

Fu W, Cohen PH, Ruud CO (2009) Experimental investigation of the machining induced residual stress tensor under mechanical loading. J Manuf Process 11:88–96. https://doi.org/10.1016/j.jmapro.2009.11.001 CrossRef

18.

Oezel T, Zeren E (2007) Finite element modeling the influence of edge roundness on the stress and temperature fields induced by high-speed machining. Int J Adv Manuf Technol 35:255–267. https://doi.org/10.1007/s00170-006-0720-2 CrossRef

19.

Huang X, Sun J, Li J, Han X, Xiong Q (2013) An experimental investigation of residual stresses in high-speed end milling 7050-T7451 aluminum alloy. Adv Mech Eng 2013:592659. https://doi.org/10.1155/2013/592659 CrossRef

20.

Outeiro JC, Umbrello D, M'Saoubi R (2006) Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel. Int J Mach Tools Manuf 46:1786–1794. https://doi.org/10.1016/j.ijmachtools.2005.11.013 CrossRef

21.

Gao H, Zhang Y, Wu Q, Li B (2018) Investigation on influences of initial residual stress on thin-walled part machining deformation based on a semi-analytical model. J Mater Process Technol 262:437–448. https://doi.org/10.1016/j.jmatprotec.2018.04.009 CrossRef

22.

Izamshah R, Mo JPT, Ding S (2012) Hybrid deflection prediction on machining thin-wall monolithic aerospace components. Proc Inst Mech Eng Part B-J Eng Manuf 226:592–605. https://doi.org/10.1177/0954405411425443 CrossRef

23.

Jiang Z, Liu Y, Li L, Shao W (2014) A novel prediction model for thin plate deflections considering milling residual stresses. Inter J Adv Manuf Technol 74:37–45. https://doi.org/10.1007/s00170-014-5952-y CrossRef

24.

Huang X, Sun J, Li J (2015) Effect of initial residual stress and machining-induced residual stress on the deformation of aluminium alloy plate. Strojniski Vestn-J Mech Eng 61:131–137. https://doi.org/10.5545/sv-jme.2014.1897 CrossRef

25.

Yang Y, Li M, Li KR (2014) Comparison and analysis of main effect elements of machining distortion for aluminum alloy and titanium alloy aircraft monolithic component. Int J Adv Manuf Technol 70:1803–1811. https://doi.org/10.1007/s00170-013-5431-x CrossRef

26.

He N, Wang Z, Jiang C, Zhang B (2003) Finite element method analysis and control stratagem for machining deformation of thin-walled components. J Mater Process Technol 139:332–336. https://doi.org/10.1016/S0924-0136(03)00550-8 CrossRef

27.

Guo H, Zuo DW, Wu HB, Xu F, Tong GQ (2009) Prediction on milling distortion for aero-multi-frame parts. Mater Sci Eng A-Struct Mater Prop Microstruct Process 499:230–233. https://doi.org/10.1016/j.msea.2007.11.137 CrossRef

28.

Tang A, Liu Z (2008) Deformations of thin-walled plate due to static end milling force. J Mater Process Technol 206:345–351. https://doi.org/10.1016/j.jmatprotec.2007.12.089 CrossRef

29.

Zhang Z, Li L, Yang Y, He N, Zhao W (2014) Machining distortion minimization for the manufacturing of aeronautical structure. Int J Adv Manuf Technol 73:1765–1773. https://doi.org/10.1007/s00170-014-5994-1 CrossRef

30.

Tang ZT, Yu T, Xu LQ, Liu ZQ (2013) Machining deformation prediction for frame components considering multifactor coupling effects. Int J Adv Manuf Technol 68:187–196. https://doi.org/10.1007/s00170-012-4718-7 CrossRef

31.

Hirano M, Yamasaki M, Hagihara K, Higashida K, Kawamura Y (2010) Effect of extrusion parameters on mechanical properties of Mg97Zn1Y2 alloys at room and elevated temperatures. Mater Trans 51:1640–1647. https://doi.org/10.2320/matertrans.MAW201026 CrossRef

32.

Ding L, Zhang X, Liu CR (2014) Dislocation density and grain size evolution in the machining of Al6061-T6 alloys. J Manuf Sci Eng-Trans ASME 136:041020. https://doi.org/10.1115/1.4027675 CrossRef

33.

Wu Q, Li D (2014) Analysis and X-ray measurements of cutting residual stresses in 7075 aluminum alloy in high speed machining. Int J Precis Eng Manuf 15:1499–1506. https://doi.org/10.1007/s12541-014-0497-4 CrossRef

34.

Chen Y, Yang Y, Feng Z, Huang B, Luo X (2017) Surface gradient nanostructures in high speed machined 7055 aluminum alloy. J Alloy Compd 726:367–377. https://doi.org/10.1016/j.jallcom.2017.08.018 CrossRef

35.

Wang Z, Yuan J, Yin Z, Hu X (2016) Surface topography and roughness of high-speed milled AlMn1Cu. Chin J Mech Eng 29:1200–1207. https://doi.org/10.3901/CJME.2016.0823.097 CrossRef

36.

Masoudi S, Amirian G, Saeedi E, Ahmadi M (2015) The effect of quench-induced residual stresses on the distortion of machined thin-walled parts. J Mater Eng Perform 24:3933–3941. https://doi.org/10.1007/s11665-015-1695-7 CrossRef

37.

Asano K, Yoneda H, Inui Y (2008) Machinability of short potassium titanate fiber reinforced AC4A aluminum alloy composite. Mater Trans 49:2399–2404. https://doi.org/10.2320/matertrans.MER2008180 CrossRef

38.

Chen S, Zhang Y, Wu Q, Yan D (2019) Residual stress relief for 2219 aluminum alloy weldments: a comparative study on three stress relief methods. Metals 9:419. https://doi.org/10.3390/met9040419 CrossRef

39.

Wu Q, Wu J, Zhang Y, Gao H, Hui D (2019) Analysis and homogenization of residual stress in aerospace ring rolling process of 2219 aluminum alloy using thermal stress relief method. Int J Mech Sci 157-158:111–118. https://doi.org/10.1016/j.ijmecsci.2019.04.040 CrossRef

40.

Singh A, Agrawal A (2015) Investigation of surface residual stress distribution in deformation machining process for aluminum alloy. J Mater Process Technol 225:195–202. https://doi.org/10.1016/j.jmatprotec.2015.05.025 CrossRef

41.

Wu Q, Li D, Zhang Y (2016) Detecting milling deformation in 7075 aluminum alloy aeronautical monolithic components using the quasi-symmetric machining method. Metals 6:80. https://doi.org/10.3390/met6040080 CrossRef

42.

Saleem W, Ijaz H, Zain-ul-Abdein M, Taimoor AA, Wang Y (2017) Studying control strategies for dimensional precision in aerospace parts machining. Int J Precis Eng Manuf 18:39–47. https://doi.org/10.1007/s12541-017-0005-8 CrossRef

43.

Xie JX, Liu JA (2012) Theory and technology of metals extrusion. Metallurgical Industry Press, Beijing, China (in Chinese)

44.

Xie ZD, Guan YJ, Lin J, Zhai JQ, Zhu LH (2019) Constitutive model of 6063 aluminum alloy under the ultrasonic vibration upsetting based on Johnson-Cook model. Ultrasonics 96:1–9. https://doi.org/10.1016/j.ultras.2019.03.017 CrossRef

Titel: A prediction model of the extrusion deformation with residual stress on 6063 aluminum alloy aeronautical plate considering different extrusion parameters
verfasst von: Qiong Wu
Nian-Pu Xue
Yi-Du Zhang
Han-Jun Gao
Jian Wu
Publikationsdatum: 05.03.2020
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 3-4/2020
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-020-05102-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3-4/2020

Experimental study on the forming process of spline by frequency and amplitude modulated axial vibration extrusion

Geometric deviations of laser powder bed–fused AlSi10Mg components: numerical predictions versus experimental measurements

A framework for analytical cost estimation of mechanical components based on manufacturing knowledge representation

A novel approach to springback control of high-strength steel in cold roll forming

Flow field design and experimental investigation of electrochemical trepanning of diffuser with a special structure

Prediction of subsurface damage depth in rotary ultrasonic machining of glass BK7 with probability statistics

Premium Partner

Marktübersichten