nach oben

International Journal of Steel Structures

Erschienen in:

24.11.2022

A Study on Cold-Formed Steel Lipped Channel Flexural Members at Elevated Temperature Under Various Loading Scenarios

verfasst von: Ravikant Singh, Avik Samanta

Erschienen in: International Journal of Steel Structures | Ausgabe 2/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, an attempt is made to examine the effects of loading pattern on critical temperature of the cold-formed steel (CFS) members under fire. Most of the past studies on CFS flexural members at elevated temperature included either point loading or uniform moment cases, however, critical temperature established for one loading pattern may prove to be unsafe or over-conservative in other loading scenario. Finite element model is developed using commercially available program ABAQUS and is validated against experimental and numerical results available in literature. Four types of loading patterns are considered namely, 4-point loading, 3-point loading, uniformly distributed load and uniform moment. Three load ratios: 0.3, 0.5 and 0.7 are considered in this study. Results from parametric study clearly indicate there is a significant effect on the critical temperature of the CFS steel flexural members due to change in loading patterns. Other parameters affecting the critical temperature such as non-dimensional slenderness, initial applied load levels, grade and geometric properties are also discussed in detail. Based on findings of this research two proposals are suggested in order to define critical temperature of the CFS flexural members under various loading conditions. Both the proposals are found to predict the safe critical temperature of CFS flexural members with accuracy.

Vorheriger Artikel Web Stress Development Mechanism Critical for the Fatigue Limit State in Horizontally Curved Steel Bridges

Nächster Artikel Experimental Study on Fire Resistance Performance of Concrete-Filled Steel Plate Composite Walls

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

ABAQUS/Standard Version 6.14 (2014). ABAQUS/CAE user’s manual. Dassault Systèmes: Simulia Corp., Providence: RI, USA.

ABNT (Brazilian Standards Association) (2010). Brazilian standard on design of cold-formed steel structures (ABNT NBR 14762:2010), Rio de Janeiro (Portuguese).

Ahn, J. K., Lee, C. H., & Park, H. N. (2013). Prediction of fire resistance of steel beams with considering structural and thermal parameters. Fire Safety Journal, 56, 65–73. https://doi.org/10.1016/j.firesaf.2013.01.002CrossRef

AISI (American Iron and Steel Institute). (2008). Standard test method for determining the web crippling strength of cold-formed steel beams. (AISI S909), Washington, DC.

AISI (American Iron and Steel Institute). (2016). North American specification (NAS) for the design of cold-formed steel structural members. (AISI-S100–16), Washington: DC

AS/NZS (Standards of Australia–SA—and Standards of New Zealand–SNZ) (2005). Cold-formed steel structures. (AS/NZS 4600), Sydney-Wellington.

Batista Abreu, J. C., Vieira, L. M. C., Abu-Hamd, M. H., & Schafer, B. W. (2014). Review: Development of performance-based fire design for cold-formed steel. Fire Science Reviews, 3(1), 1–15. https://doi.org/10.1186/s40038-014-0001-3CrossRef

Boissonnade N, Greiner R, Jaspart JP, L. J. (2006). Rules for member stability in EN 1993-1-1: Background documentation and design guidelines. ECCS European Convention for Constructional Steelwork.

Chen, B., Roy, K., Uzzaman, A., & Lim, J. B. P. (2020a). Moment capacity of cold-formed channel beams with edge-stiffened web holes, un-stiffened web holes and plain webs. Thin-Walled Structures, 157(August), 107070. https://doi.org/10.1016/j.tws.2020.107070CrossRef

Chen, B., Roy, K., Uzzaman, A., Raftery, G., & Lim, J. B. P. (2020b). Axial strength of back-to-back cold-formed steel channels with edge-stiffened holes, un-stiffened holes and plain webs. Journal of Constructional Steel Research, 174, 106313. https://doi.org/10.1016/j.jcsr.2020.106313CrossRef

Chen, J., & Young, B. (2007). Cold-formed steel lipped channel columns at elevated temperatures. Engineering Structures, 29(10), 2445–2456. https://doi.org/10.1016/j.engstruct.2006.12.004CrossRef

Dharma, R. B., & Tan, K. H. (2007). Proposed design methods for lateral torsional buckling of unrestrained steel beams in fire. Journal of Constructional Steel Research, 63(8), 1066–1076. https://doi.org/10.1016/j.jcsr.2006.09.008CrossRef

EN1991-1-2 (2002). Eurocode 3: Design of steel structures—Part 1-2: General rules - Structural fire design, European Committee for Standardisation Brussels, Belgium.

EN1993-1-1 (2004). Eurocode 3: Design of steel structures—Part 1-1: General rules and rules for buildings, European Committee for Standardization Brussels, Belgium.

EN1993-1.3 (2006). Eurocode 3: Design of steel structures—Part 1-3: General rules—Supplementary rules for cold-formed members and sheeting General Rules, European Committee for Standardization Brussels, Belgium.

EN1993-1.5 (2006). Eurocode 3: Design of steel structures—Part 1–5: General rules—Plated structural elements, European Committee for Standardisation Brussels, Belgium.

Fang, Z., Roy, K., Liang, H., Poologanathan, K., Ghosh, K., Mohamed, A. M., & Lim, J. B. P. (2021). Numerical simulation and design recommendations for web crippling strength of cold-formed steel channels with web holes under interior-one-flange loading at elevated temperatures. Buildings. https://doi.org/10.3390/buildings11120666CrossRef

Gatheeshgar, P., Poologanathan, K., Thamboo, J., Roy, K., Rossi, B., Molkens, T., Perera, D., & Navaratnam, S. (2021). On the fire behaviour of modular floors designed with optimised cold-formed steel joists. Structures, 30(February), 1071–1085. https://doi.org/10.1016/j.istruc.2021.01.055CrossRef

Gunalan, S., Bandula Heva, Y., & Mahendran, M. (2015). Local buckling studies of cold-formed steel compression members at elevated temperatures. Journal of Constructional Steel Research, 108, 31–45. https://doi.org/10.1016/j.jcsr.2015.01.011CrossRef

Gunalan, S., & Mahendran, M. (2013). Finite element modelling of load bearing cold-formed steel wall systems under fire conditions. Engineering Structures, 56, 1007–1027. https://doi.org/10.1016/j.engstruct.2013.06.022CrossRef

Gunalan, S., & Mahendran, M. (2014). Experimental investigation of post-fire mechanical properties of cold-formed steels. Thin-Walled Structures, 84, 241–254. https://doi.org/10.1016/j.tws.2014.06.010CrossRef

Hui, C., Gardner, L., & Nethercot, D. A. (2016). Moment redistribution in cold-formed steel continuous beams. Thin-Walled Structures, 98, 465–477. https://doi.org/10.1016/j.tws.2015.10.009CrossRef

Imran, M., Mahendran, M., & Keerthan, P. (2018). Mechanical properties of cold-formed steel tubular sections at elevated temperatures. Journal of Constructional Steel Research, 143, 131–147. https://doi.org/10.1016/j.jcsr.2017.12.003CrossRef

IS 811 (1987). Specification for cold formed light gauge structural steel sections. New Delhi: Bureau of Indian Standards.

ISO 834-1 (1999). Fire Resistance Tests—Elements of Building Construction, Part 1: General Requirements. International Organization for Standardization Geneva, Switzerland.

Kala, Z. (2015). Sensitivity and reliability analyses of lateral-torsional buckling resistance of steel beams. Archives of Civil and Mechanical Engineering, 15(4), 1098–1107.CrossRef

Kankanamge, D. & NSS. (2010). Structural behaviour and design of cold-formed steel beams at elevated temperatures nirosha dolamune kankanamge. PhD Thesis, Queensland University of Technology, Brisbane, Australia.

Kankanamge, N. D., & Mahendran, M. (2012). Behaviour and design of cold-formed steel beams subject to lateral-torsional buckling at elevated temperatures. Thin-Walled Structures, 61, 213–228. https://doi.org/10.1016/j.tws.2012.05.009CrossRef

Kankanamge, N. D., & Mahendran, M. (2011). Mechanical properties of cold-formed steels at elevated temperatures. Thin-Walled Structures, 49(1), 26–44. https://doi.org/10.1016/j.tws.2010.08.004CrossRef

Keerthan, P., & Mahendran, M. (2012). Numerical modelling of non-load-bearing light gauge cold-formed steel frame walls under fire conditions. Journal of Fire Sciences, 30(5), 375–403. https://doi.org/10.1177/0734904112440688CrossRef

Kumar, A., Roy, K., Uzzaman, A., & Lim, J. B. (2021). Finite element analysis of unfastened cold-formed steel channel sections with web holes under end-two-flange loading at elevated temperatures. Advanced Steel Construction, 17(3), 231–242.

Laim, L., & Rodrigues, J. P. C. (2016a). Numerical analysis on axially-and-rotationally restrained cold-formed steel beams subjected to fire. Thin-Walled Structures, 104, 1–16. https://doi.org/10.1016/j.tws.2016.03.004CrossRef

Laim, L., & Rodrigues, J. P. C. (2016b). On the applicability and accuracy of fire design methods for open cold-formed steel beams. Journal of Building Engineering, 8, 260–268. https://doi.org/10.1016/j.jobe.2016.09.004CrossRef

Laim, L., & Rodrigues, J. P. C. (2018). Fire design methodologies for cold-formed steel beams made with open and closed cross-sections. Engineering Structures, 171(April), 759–778. https://doi.org/10.1016/j.engstruct.2018.06.030CrossRef

Laim, L., Rodrigues, J. P. C., & Craveiro, H. D. (2016). Flexural behaviour of axially and rotationally restrained cold-formed steel beams subjected to fire. Thin-Walled Structures, 98, 39–47. https://doi.org/10.1016/j.tws.2015.03.010CrossRef

Laim, L., Rodrigues, J. P. C., & Da Silva, L. S. (2013). Experimental and numerical analysis on the structural behaviour of cold-formed steel beams. Thin-Walled Structures, 72, 1–13. https://doi.org/10.1016/j.tws.2013.06.008CrossRef

Laim, L., Rodrigues, J. P. C., & Da Silva, L. S. (2014). Experimental analysis on cold-formed steel beams subjected to fire. Thin-Walled Structures, 74, 104–117. https://doi.org/10.1016/j.tws.2013.09.006CrossRef

Landesmann, A., & Camotim, D. (2016). Distortional failure and DSM design of cold-formed steel lipped channel beams under elevated temperatures. Thin-Walled Structures, 98, 75–93. https://doi.org/10.1016/j.tws.2015.06.004CrossRef

Lee J. (2004). Local buckling behaviour and design of cold-formed steel compression members at elevated temperatures, Ph.D. Thesis, Queensland University of Technology.

Macdonald, M., Heiyantuduwa, M. A., & Rhodes, J. (2008). Recent developments in the design of cold-formed steel members and structures. Thin-Walled Structures, 46(7–9), 1047–1053. https://doi.org/10.1016/j.tws.2008.01.039CrossRef

Martins, A. D., Camotim, D., & Dinis, P. B. (2018). Distortional-global interaction in lipped channel and zed-section beams: Strength, relevance and DSM design. Thin-Walled Structures, 129(October), 289–308. https://doi.org/10.1016/j.tws.2018.02.015CrossRef

Pham, C. H., & Hancock, G. J. (2013). Experimental investigation and direct strength design of high-strength, complex C-sections in pure bending. Journal of Structural Engineering, 139(11), 1842–1852. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000736CrossRef

Quach, W. M., Teng, J. G., & Chung, K. F. (2004). Residual stresses in steel sheets due to coiling and uncoiling: A closed-form analytical solution. Engineering Structures, 26(9), 1249–1259. https://doi.org/10.1016/j.engstruct.2004.04.005CrossRef

Ramberg, W., & Osgood, W. R. (1943). Description of stress-strain curves by three parameters (No. NACA-TN-902).

Ranawaka, T., & Mahendran, M. (2009). Experimental study of the mechanical properties of light gauge cold-formed steels at elevated temperatures. Fire Safety Journal, 44(2), 219–229. https://doi.org/10.1016/j.firesaf.2008.06.006CrossRef

Ranawaka, T., & Mahendran, M. (2010). Numerical modelling of light gauge cold-formed steel compression members subjected to distortional buckling at elevated temperatures. Thin-Walled Structures, 48(4–5), 334–344. https://doi.org/10.1016/j.tws.2009.11.004CrossRef

Roy, K., Lau, H. H., Ting, T. C. H., Chen, B., & Lim, J. B. P. (2020). Flexural capacity of gapped built-up cold-formed steel channel sections including web stiffeners. Journal of Constructional Steel Research, 172, 106154. https://doi.org/10.1016/j.jcsr.2020.106154CrossRef

Roy, K., & Lim, J. B. P. (2019). Numerical investigation into the buckling behaviour of face-to-face built-up cold-formed stainless steel channel sections under axial compression. Structures, 20(February), 42–73. https://doi.org/10.1016/j.istruc.2019.02.019CrossRef

Roy, K., Lim, J. B. P., Lau, H. H., Yong, P. M., Clifton, G. C., Wrzesien, A., & Mei, C. C. (2019). Collapse behaviour of a fire engineering designed single-storey cold- formed steel building in severe fires. Thin-Walled Structures, 142(May), 340–357. https://doi.org/10.1016/j.tws.2019.04.046CrossRef

Schafer, B. W., Li, Z., & Moen, C. D. (2010). Computational modeling of cold-formed steel. Thin-Walled Structures, 48(10–11), 752–762. https://doi.org/10.1016/j.tws.2010.04.008CrossRef

Schafer, B. W., & Pekoz, T. (1998). Computational modeling of cold-formed steel: Characterizing geometric imperfections and residual stresses. Journal of Constructional Steel Research, 47(3), 193–210. https://doi.org/10.1016/S0143-974X(98)00007-8CrossRef

Steau, E., Mahendran, M., & Poologanathan, K. (2020). Elevated temperature thermal properties of carbon steels used in cold-formed light gauge steel frame systems. Journal of Building Engineering, 28(October), 101074. https://doi.org/10.1016/j.jobe.2019.101074CrossRef

Sundararajah, L., Mahendran, M., & Keerthan, P. (2016). Experimental studies of lipped channel beams subject to web crippling under two-flange load cases. Journal of Structural Engineering, 142(9), 04016058. https://doi.org/10.1061/(asce)st.1943-541x.0001523CrossRef

Vila Real, P. M. M., Cazeli, R., Simoes da Silva, L., Santiago, A., & Piloto, P. (2004). The effect of residual stresses in the lateral-torsional buckling of steel I-beams at elevated temperature. Journal of Constructional Steel Research, 60(3–5), 783–793. https://doi.org/10.1016/S0143-974X(03)00143-3CrossRef

Vila Real, P. M. M., Lopes, N., Simões da Silva, L., & Franssen, J. M. (2007). Parametric analysis of the lateral-torsional buckling resistance of steel beams in case of fire. Fire Safety Journal, 42(6–7), 416–424. https://doi.org/10.1016/j.firesaf.2006.11.010CrossRef

Vila Real, P. M. M., Piloto, P. A. G., & Franssen, J. M. (2003). A new proposal of a simple model for the lateral-torsional buckling of unrestrained steel I-beams in case of fire: Experimental and numerical validation. Journal of Constructional Steel Research, 59(2), 179–199. https://doi.org/10.1016/S0143-974X(02)00023-8CrossRef

Young, B., & Rasmussen, K. J. R. (1999). Behaviour of cold-formed singly symmetric columns. Thin-Walled Structures, 33(2), 83–102. https://doi.org/10.1016/s0263-8231(98)00044-5CrossRef

Yu, C. (2016). Recent trends in cold-formed steel construction. Woodhead Publishing.

Yu, C., & Schafer, B. W. (2005). Distortional buckling of cold-formed steel members. Research Report, American Iron and Steel Institute, Committee on Specifications.

Titel: A Study on Cold-Formed Steel Lipped Channel Flexural Members at Elevated Temperature Under Various Loading Scenarios
verfasst von: Ravikant Singh
Avik Samanta
Publikationsdatum: 24.11.2022
Verlag: Korean Society of Steel Construction
Erschienen in: International Journal of Steel Structures / Ausgabe 2/2023
Print ISSN: 1598-2351
Elektronische ISSN: 2093-6311
DOI: https://doi.org/10.1007/s13296-022-00699-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2023

Analysis of Pressure Distribution of the Bolted Joints Based on the Finite Element Method

Study of Fire Resistance Performance of Stiffened Welded Hollow Spherical Joint Under Axial Tension

The Confinement Effect on the Buckling Performance of Cylindrical Tanks

Push-Out Tests on Interlocked Angles Connectors in Steel-Concrete-Steel Composite Structure

Web Stress Development Mechanism Critical for the Fatigue Limit State in Horizontally Curved Steel Bridges

Parameter Sensitivity Study on Static and Dynamic Mechanical Properties of the Spatial Y-shaped Tied Arch Bridge

Premium Partner

Marktübersichten