nach oben

Erschienen in:

2024 | OriginalPaper | Buchkapitel

Ad-Hoc Algorithm for Direct Data Processing on Board Each Single Node in the Structural Health Monitoring

verfasst von : Romina Paolucci, Alfiero Leoni, Leonardo Fazzini, Rocco Alaggio, Riccardo Cirella, Vincenzo Stornelli, Giuseppe Ferri

Erschienen in: Proceedings of SIE 2023

Verlag: Springer Nature Switzerland

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this work, the test of a new algorithm for the individuation of the modal frequency of a structure is presented. Its novelty is in the fact that the processing of the data, detected by the accelerometers, takes place directly on board of the single node. The test has been conducted on a metal bar whose modal frequencies had already been determined and taken as a reference. Then, the bar frequencies have been calculated using a new algorithm here presented. The result is the substantial correspondence between the reference frequencies and those calculated. Subsequently, the algorithm has been applied to a real structure.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Design and Manufacture of 3D-Printed Circuit Boards

Nächstes Kapitel Computational Storage for 3D NAND Flash Error Recovery Flow Prediction

Paolucci, R., Rotilio, M., De Berardinis, P., Ferri, G., Cucchiella, F., Stornelli, V.: Electronic system for monitoring of dust on construction sites for the health of workers. In: Proceedings of the 2021 15th International Conference on Advanced Technologies, Systems and Services in Telecommunications (TELSIKS), pp. 329–332. IEEE, Nis, Serbia, 20 October 2021

Paolucci, R., Rotilio, M., Ricci, S., Pelliccione, A., Ferri, G.: A sensor-based system for dust containment in the construction site. Energies 15, 7272 (2022). https://doi.org/10.3390/en15197272CrossRef

Paolucci, R., Muttillo, M., Di Luzio, M., Alaggio, R., Ferri, G.: Electronic sensory system for structural health monitoring applications. In: Proceedings of the 2020 5th International Conference on Smart and Sustainable Technologies (SpliTech), pp. 1–5. IEEE, Split, Croatia, 23 September 2020

Deshmukh, A.D., Shinde, U.B.: A low cost environment monitoring system using Raspberry Pi and Arduino with Zigbee. In: Proceedings of the 2016 International Conference on Inventive Computation Technologies (ICICT), pp. 1–6. IEEE, Coimbatore, India, August 2016

Fusacchia, P., et al.: A low cost fully integrable in a standard CMOS technology portable system for the assessment of wind conditions. Procedia Eng. 168, 1024–1027 (2016). https://doi.org/10.1016/j.proeng.2016.11.331CrossRef

Pantoli, L., Paolucci, R., Muttillo, M., Fusacchia, P., Leoni, A.: A multisensorial thermal anemometer system. In: Andò, B., Baldini, F., Di Natale, C., Marrazza, G., Siciliano, P. (eds.) Sensors. LNEE, vol. 431, pp. 330–337. Springer, Cham (2018). ISBN 978-3-319-55076-3, https://doi.org/10.1007/978-3-319-55077-0_42

Novas, N., Gázquez, J.A., MacLennan, J., García, R.M., Fernández-Ros, M., Manzano-Agugliaro, F.: A real-time underground environment monitoring system for sustainable tourism of caves. J. Clean. Prod. 142, 2707–2721 (2017). https://doi.org/10.1016/j.jclepro.2016.11.005CrossRef

Liu, L., Zhang, Y.: Design of greenhouse environment monitoring system based on wireless sensor network. In: Proceedings of the 2017 3rd International Conference on Control, Automation and Robotics (ICCAR), pp. 463–466. IEEE, Nagoya, Japan, April 2017

Kim, S.H., Jeong, J.M., Hwang, M.T., Kang, C.S.: Development of an IoT-based atmospheric environment monitoring system. In: Proceedings of the 2017 International Conference on Information and Communication Technology Convergence (ICTC), pp. 861–863. IEEE, Jeju, October 2017

10.

Pantoli, L., et al.: Electronic system for structural and environmental building monitoring. In: Andò, B., et al. (eds.) Sensors. LNEE, vol. 539, pp. 481–488. Springer, Cham (2019). ISBN 978-3-030-04323-0, https://doi.org/10.1007/978-3-030-04324-7_58

11.

Barile, G., Leoni, A., Pantoli, L., Stornelli, V.: Real-time autonomous system for structural and environmental monitoring of dynamic events. Electronics 7, 420 (2018). https://doi.org/10.3390/electronics7120420CrossRef

12.

Ragnoli, M., et al.: A LoRaWAN multi-technological architecture for construction site monitoring. Sensors 22, 8685 (2022). https://doi.org/10.3390/s22228685CrossRef

13.

Ragnoli, M., Barile, G., Leoni, A., Ferri, G., Stornelli, V.: An autonomous low-power LoRa-based flood-monitoring system. JLPEA 10, 15 (2020). https://doi.org/10.3390/jlpea10020015CrossRef

14.

Muttillo, M., Muttillo, V., Pomante, L., Pantoli, L.: A low cost and flexible power line communication sensory system for home automation. In: Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, pp. 191–196. IEEE, Roma, Italy, June 2020

15.

Luan, H., Leng, J.: Design of energy monitoring system based on IOT. In: Proceedings of the 2016 Chinese Control and Decision Conference (CCDC), pp. 6785–6788. IEEE, Yinchuan, China, May 2016

16.

de Rubeis, T., Nardi, I., Muttillo, M.: Development of a low-cost temperature data monitoring. An upgrade for hot box apparatus. J. Phys.: Conf. Ser. 923, 012039 (2017). https://doi.org/10.1088/1742-6596/923/1/012039

17.

Ghosh, A., Raha, A., Mukherjee, A.: Energy-efficient IoT-health monitoring system using approximate computing. Internet Things 9, 100166 (2020). https://doi.org/10.1016/j.iot.2020.100166CrossRef

18.

de Rubeis, T., Muttillo, M., Nardi, I., Pantoli, L., Stornelli, V., Ambrosini, D.: Integrated measuring and control system for thermal analysis of buildings components in hot box experiments. Energies 12, 2053 (2019). https://doi.org/10.3390/en12112053CrossRef

19.

de Rubeis, T., Nardi, I., Muttillo, M., Ranieri, S., Ambrosini, D.: Room and window geometry influence for daylight harvesting maximization – effects on energy savings in an academic classroom. Energy Procedia 148, 1090–1097 (2018). https://doi.org/10.1016/j.egypro.2018.08.050

20.

Kychkin, A.V.: Synthesizing a system for remote energy monitoring in manufacturing. Metallurgist 59(9–10), 752–760 (2016). https://doi.org/10.1007/s11015-016-0170-5CrossRef

21.

Muttillo, M., Battista, L.D., de Rubeis, T., Nardi, I.: Structural health continuous monitoring of buildings – a modal parameters identification system. In: Proceedings of the 2019 4th International Conference on Smart and Sustainable Technologies (SpliTech), pp. 1–4. IEEE, Split, Croatia, June 2019

22.

Muttillo, M., et al.: Structural health monitoring: an IoT sensor system for structural damage indicator evaluation. Sensors 20, 4908 (2020). https://doi.org/10.3390/s20174908CrossRef

23.

Ooijevaar, T.H.: Vibration based structural health monitoring of composite skin-stiffener structures. Ph.D., University of Twente, Enschede, The Netherlands (2014)CrossRef

24.

Ko, J.M., Ni, Y.Q.: Technology developments in structural health monitoring of large-scale bridges. Eng. Struct. 27, 1715–1725 (2005). https://doi.org/10.1016/j.engstruct.2005.02.021CrossRef

25.

Mufti, A.A.: Structural health monitoring of innovative Canadian civil engineering structures. Struct. Health Monit. 1, 89–103 (2002). https://doi.org/10.1177/147592170200100106CrossRef

26.

ATMEGA328P-PU Microchip Technology/Atmel|Mouser Available online. https://www.mouser.it/ProductDetail/556-ATMEGA328P-PU. Accessed 22 Feb 2023

27.

Tri-Axis, User Selectable ± 2g, 4g, 8g, Digital (I2C/SPI) Output, Integrated FIFO/FILO Buffer, 3 × 3 × 0.9 mm LGA - KX023-1025 - Global Available online. https://www.kionix.com/product/KX023-1025. Accessed 22 Feb 2023

Titel: Ad-Hoc Algorithm for Direct Data Processing on Board Each Single Node in the Structural Health Monitoring
verfasst von: Romina Paolucci
Alfiero Leoni
Leonardo Fazzini
Rocco Alaggio
Riccardo Cirella
Vincenzo Stornelli
Giuseppe Ferri
Verlag: Springer Nature Switzerland
Buch: Proceedings of SIE 2023
Print ISBN: 978-3-031-48710-1

Electronic ISBN: 978-3-031-48711-8

Copyright-Jahr: 2024
DOI: https://doi.org/10.1007/978-3-031-48711-8_50

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Die Gewinner und Laudatoren des Sustainability Award in Automotive 2024/© Uli Regenscheit | ATZlive, Search Icon, Banner Hanser, Suresh Vittal/© Alteryx, Additiv gefertigte Teile/© Marina_Skoropadskaya | Getty Images | iStock, Warnschild "Land unter"/© Bluedesign / Fotolia, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, ATZ-Webinar: Prototypenfreie Entwicklung durch Offline- und Driver-in-the-Loop-HiL-Tests /© (c) VI-grade, chassis.tech plus 2023/© [M] ATZlive / TÜV SÜD PRODUCT SERVICE GMBH, adäsion-Webinar-Matinee/© krystiannawrocki_ Getty Images

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.