nach oben

Meccanica

Erschienen in:

01.03.2013

An enhanced beam-theory model of the mixed-mode bending (MMB) test—Part I: Literature review and mechanical model

verfasst von: Stefano Bennati, Paolo Fisicaro, Paolo S. Valvo

Erschienen in: Meccanica | Ausgabe 2/2013

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The paper presents a mechanical model of the mixed-mode bending (MMB) test used to assess the mixed-mode interlaminar fracture toughness of composite laminates. The laminated specimen is considered as an assemblage of two sublaminates partly connected by an elastic–brittle interface. The problem is formulated through a set of 36 differential equations, accompanied by suitable boundary conditions. Solution of the problem is achieved by separately considering the two subproblems related to the symmetric and antisymmetric parts of the loads, which for symmetric specimens correspond to fracture modes I and II, respectively. Explicit expressions are determined for the interfacial stresses, internal forces, and displacements.

Vorheriger Artikel Erratum to: Experimental study on AE behavior of hydraulic concrete under compression

Nächster Artikel Erratum to: An enhanced beam-theory model of the mixed-mode bending (MMB) test—Part I: Literature review and mechanical model

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Garg AC (1988) Delamination—a damage mode in composite structures. Eng Fract Mech 29(5):557–584. doi:10.1016/0013-7944(88)90181-6 CrossRef

Sela N, Ishai O (1989) Interlaminar fracture toughness and toughening of laminated composite materials: a review. Composites 20(5):423–435. doi:10.1016/0010-4361(89)90211-5 CrossRef

Tay TE (2003) Characterization and analysis of delamination fracture in composites: an overview of developments from 1990 to 2001. Appl Mech Rev 56(1):1–31. doi:10.1115/1.1504848 ADSCrossRef

Friedrich K (ed) (1989) Application of fracture mechanics to composite materials. Elsevier, Amsterdam

Adams DF, Carlsson LA, Pipes RB (2003) Experimental characterization of advanced composite materials, 3rd edn. CRC Press, Boca Raton MATH

Brunner AJ, Blackman BRK, Davies P (2008) A status report on delamination resistance testing of polymer–matrix composites. Eng Fract Mech 75(9):2779–2794. doi:10.1016/j.engfracmech.2007.03.012 CrossRef

Crews JH Jr, Reeder JR (1988) A mixed-mode bending apparatus for delamination testing. NASA TM-100662. http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19890001574_1989001574.pdf

Reeder JR, Crews JH Jr (1990) Mixed-mode bending method for delamination testing. AIAA J 28(7):1270–1276. doi:10.2514/3.25204 ADSCrossRef

Reeder JR, Crews JH Jr (1991) Nonlinear analysis and redesign of the mixed-mode bending delamination test. NASA TM-102777. http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19910010169_1991010169.pdf

10.

Reeder JR, Crews JH Jr (1992) Redesign of the mixed-mode bending delamination test to reduce nonlinear effects. J Compos Technol Res 14(1):12–19. doi:10.1520/CTR10078J CrossRef

11.

Reeder JR (1992) An evaluation of mixed-mode delamination failure criteria. NASA TM-104210. http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19920009705_1992009705.pdf

12.

Reeder JR (2003) Refinements to the mixed-mode bending test for delamination toughness. J Compos Technol Res 25(4):191–195. doi:10.1520/CTR10961J

13.

ASTM (2006) Standard test method for mixed mode I–mode II interlaminar fracture toughness of unidirectional fiber reinforced polymer matrix composites. D6671/D6671M-06. American Society for Testing and Materials, West Conshohocken. doi:10.1520/D6671_D6671M-06

14.

Allix O, Ladevèze P (1992) Interlaminar interface modelling for the prediction of delamination. Compos Struct 22(4):235–242. doi:10.1016/0263-8223(92)90060-P ADSCrossRef

15.

Corigliano A (1993) Formulation, identification and use of interface models in the numerical analysis of composite delamination. Int J Solids Struct 30(20):2779–2811. doi:10.1016/0020-7683(93)90154-Y MATHCrossRef

16.

Bennati S, Colleluori M, Corigliano D, Valvo PS (2009) An enhanced beam-theory model of the asymmetric double cantilever beam (ADCB) test for composite laminates. Compos Sci Technol 69(11–12):1735–1745. doi:10.1016/j.compscitech.2009.01.019 CrossRef

17.

Bennati S, Fisicaro P, Valvo PS (2013) An enhanced beam-theory model of the mixed-mode bending (MMB) test—Part II: Applications and results. Meccanica. doi:10.1007/s11012-012-9682-7

18.

Chen JH, Sernow R, Schultz E, Hinrichsen G (1999) A modification of the mixed-mode bending test apparatus. Composites, Part A, Appl Sci Manuf 30(7):871–877. doi:10.1016/S1359-835X(98)00193-6 CrossRef

19.

Kinloch AJ, Wang Y, Williams JG, Yayla P (1993) The mixed-mode delamination of fibre composite materials. Compos Sci Technol 47(3):225–237. doi:10.1016/0266-3538(93)90031-B ADSCrossRef

20.

Kenane M, Benzeggagh ML (1997) Mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites under fatigue loading. Compos Sci Technol 57(5):597–605. doi:10.1016/S0266-3538(97)00021-3 CrossRef

21.

Yum Y-J, You H (2001) Pure mode I, II and mixed mode interlaminar fracture of graphite/epoxy composite materials. J Reinf Plast Compos 20(9):794–808. doi:10.1177/073168401772678571 CrossRef

22.

Soboyejo WO, Lu G-Y, Chengalva S, Zhang J, Kenner V (1999) A modified mixed-mode bending specimen for the interfacial fracture testing of dissimilar materials. Fatigue Fract Eng Mater Struct 22(9):799–810. doi:10.1046/j.1460-2695.1999.00203.x

23.

Marannano GV, Pasta A (2007) An analysis of interface delamination mechanisms in orthotropic and hybrid fiber-metal composite laminates. Eng Fract Mech 74(4):612–626. doi:10.1016/j.engfracmech.2006.09.004 CrossRef

24.

Suárez JC, López F, Miguel S, Pinilla P, Herreros MA (2009) Determination of the mixed-mode fracture energy of elastomeric structural adhesives: evaluation of debonding buckling in fibre-metal hybrid laminates. Fatigue Fract Eng Mater Struct 32(2):127–140. doi:10.1111/j.1460-2695.2008.01317.x CrossRef

25.

Bhashyan S, Davidson BD (1997) Evaluation of data reduction methods for the mixed mode bending test. AIAA J 35(3):546–552. doi:10.2514/2.129 ADSCrossRef

26.

Kanninen MF (1973) An augmented double cantilever beam model for studying crack propagation and arrest. Int J Fract 9(1):83–92. doi:10.1007/BF00035958

27.

Carlsson LA, Gillespie JW, Pipes RB (1986) On the analysis and design of the end notched flexure (ENF) specimen for mode II testing. J Compos Mater 20(6):594–604. doi:10.1177/002199838602000606 CrossRef

28.

Fan C, Ben Jar P-Y, Cheng J-JR (2006) Revisit the analysis of end-notched-flexure (ENF) specimen. Compos Sci Technol 66(10):1497–1498. doi:10.1016/j.compscitech.2006.01.016 CrossRef

29.

Valvo PS (2008) Does shear deformability influence the mode II delamination of laminated beams? In: ECF 17–17th European Conference on Fracture, 2–5 September 2008, Brno, Czech Republic

30.

Williams JG (1989) End corrections for orthotropic DCB specimens. Compos Sci Technol 35(4):367–376. doi:10.1016/0266-3538(89)90058-4 CrossRef

31.

Hashemi S, Kinloch AJ, Williams JG (1990) The analysis of interlaminar fracture in uniaxial fibre-polymer composites. Proc R Soc Lond. Ser A 427(1872):173–199. doi:10.1098/rspa.1990.0007 ADSCrossRef

32.

Wang Y, Williams JG (1992) Corrections for mode II fracture toughness specimens of composites materials. Compos Sci Technol 43(3):251–256. doi:10.1016/0266-3538(92)90096-L CrossRef

33.

Wang JL, Qiao PZ (2004) Novel beam analysis of end notched flexure specimen for mode-II fracture. Eng Fract Mech 71(2):219–231. doi:10.1016/S0013-7944(03)00096-1 MathSciNetCrossRef

34.

de Morais AB (2011) Novel cohesive beam model for the end-notched flexure (ENF) specimen. Eng Fract Mech 78(17):3017–3029. doi:10.1016/j.engfracmech.2011.08.019 CrossRef

35.

Jumel J, Budzik MK, Ben Salem N, Shanahan MER (2013) Instrumented end notched flexure—crack propagation and process zone monitoring. Part I: Modelling and analysis. Int J Solids Struct 50(2):310–319. doi:10.1016/j.ijsolstr.2012.08.028 CrossRef

36.

de Morais AB, Pereira AB (2006) Mixed mode I + II interlaminar fracture of glass/epoxy multidirectional laminates—Part 1: Analysis. Compos Sci Technol 66(13):1889–1895. doi:10.1016/j.compscitech.2006.04.006 CrossRef

37.

Pereira AB, de Morais AB (2006) Mixed mode I + II interlaminar fracture of glass/epoxy multidirectional laminates—Part 2: Experiments. Compos Sci Technol 66(13):1896–1902. doi:10.1016/j.compscitech.2006.04.008 CrossRef

38.

de Morais AB, Pereira AB (2007) Interlaminar fracture of multidirectional glass/epoxy laminates under mixed-mode I + II loading. Mech Compos Mater 43(3):233–244. doi:10.1007/s11029-007-0023-1 CrossRef

39.

Pereira AB, de Morais AB (2008) Mixed mode I + II interlaminar fracture of carbon/epoxy laminates. Composites, Part A 39(2):322–333. doi:10.1016/j.compositesa.2007.10.013 CrossRef

40.

Ducept F, Davies P, Gamby D (1997) An experimental study to validate tests used to determine mixed mode failure criteria of glass/epoxy composites. Composites, Part A 28(8):719–729. doi:10.1016/S1359-835X(97)00012-2 CrossRef

41.

Ducept F, Gamby D, Davies P (1999) A mixed-mode failure criterion derived from tests on symmetric and asymmetric specimens. Compos Sci Technol 59(4):609–619. doi:10.1016/S0266-3538(98)00105-5 CrossRef

42.

Ducept F, Davies P, Gamby D (2000) Mixed mode failure criteria for a glass/epoxy composite and an adhesively bonded composite/composite joint. Int J Adhes Adhes 20(3):233–244. doi:10.1016/S0143-7496(99)00048-2 CrossRef

43.

Benzeggagh ML, Kenane M (1996) Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus. Compos Sci Technol 56(4):439–449. doi:10.1016/0266-3538(96)00005-X CrossRef

44.

Martin RH, Hansen PL (1997) Experimental compliance calibration for the MMB specimen. In: Armanios EA (ed) Composite materials: fatigue and fracture, vol 6. ASTM STP, vol 1285, pp 305–323. doi:10.1520/STP19934S

45.

Ozdil F, Carlsson LA (1999) Beam analysis of angle-ply laminate mixed-mode bending specimens. Compos Sci Technol 59(6):937–945. doi:10.1016/S0266-3538(98)00128-6 CrossRef

46.

Kim BW, Mayer AH (2003) Influence of fiber direction and mixed-mode ratio on delamination fracture toughness of carbon/epoxy laminates. Compos Sci Technol 63(5):695–713. doi:10.1016/S0266-3538(02)00258-0 CrossRef

47.

Yokozeki T, Ogasawara T, Aoki T (2008) Correction method for evaluation of interfacial fracture toughness of DCB, ENF and MMB specimens with residual thermal stresses. Compos Sci Technol 68(3–4):760–767. doi:10.1016/j.compscitech.2007.08.025 CrossRef

48.

Jagan U, Chauhan PS, Parameswaran V (2008) Energy release rate for interlaminar cracks in graded laminates. Compos Sci Technol 68(6):1480–1488. doi:10.1016/j.compscitech.2007.10.027 CrossRef

49.

Quispitupa A, Berggreen C, Carlsson LA (2009) On the analysis of a mixed mode bending sandwich specimen for debond fracture characterization. Eng Fract Mech 76(4):594–613. doi:10.1016/j.engfracmech.2008.12.008 CrossRef

50.

Allix O, Corigliano A (1996) Modeling and simulation of crack propagation in mixed-modes interlaminar fracture specimens. Int J Fract 77(2):111–140. doi:10.1007/BF00037233 CrossRef

51.

Miravete A, Jiménez MA (2002) Application of the finite element method to prediction of onset of delamination growth. Appl Mech Rev 55(2):89–105. doi:10.1115/1.1450763 ADSCrossRef

52.

Jiménez MA, Miravete A (2004) Application of the finite-element method to predict the onset of delamination growth. J Compos Mater 38(15):1309–1335. doi:10.1177/0021998304042734 CrossRef

53.

Camanho PP, Dávila CG, de Moura NF (2003) Numerical simulation of mixed-mode progressive delamination in composite materials. J Compos Mater 37(16):1415–1438. doi:10.1177/0021998303034505 CrossRef

54.

Turon A, Camanho PP, Costa J, Dávila CG (2006) A damage model for the simulation of delamination in advanced composites under variable-mode loading. Mech Mater 38(11):1072–1089. doi:10.1016/j.mechmat.2005.10.003 CrossRef

55.

Tumino D, Cappello F (2007) Simulation of fatigue delamination growth in composites with different mode mixtures. J Compos Mater 41(20):2415–2441. doi:10.1177/0021998307075439 CrossRef

56.

Oliveira JMQ, de Moura MFSF, Silva MAL, Morais JJL (2007) Numerical analysis of the MMB test for mixed-mode I/II wood fracture. Compos Sci Technol 67(2):1764–1771. doi:10.1016/j.compscitech.2006.11.007 CrossRef

57.

de Moura MFSF, Oliveira JMQ, Morais JJL, Xavier J (2010) Mixed-mode I/II wood fracture characterization using the mixed-mode bending test. Eng Fract Mech 77(1):144–152. doi:10.1016/j.engfracmech.2009.09.014 CrossRef

58.

Warrior NA, Pickett AK, Lourenço NSF (2003) Mixed-mode delamination—experimental and numerical studies. Strain 39(4):153–159. doi:10.1046/j.1475-1305.2003.00088.x CrossRef

59.

Iannucci L (2006) Dynamic delamination modelling using interface elements. Comput Struct 84(15–16):1029–1048. doi:10.1016/j.compstruc.2006.02.002 CrossRef

60.

Borg R, Nilsson L, Simonsson K (2004) Simulating DCB, ENF and MMB experiments using shell elements and a cohesive zone model. Compos Sci Technol 64(2):269–278. doi:10.1016/S0266-3538(03)00255-0 CrossRef

61.

Aymerich F, Lecca G, Priolo P (2007) Modelling of delamination growth in composite laminates by the virtual internal bond method. Composites, Part A 39(2):145–153. doi:10.1016/j.compositesa.2007.11.012 CrossRef

62.

van der Meer FP, Sluys LJ (2009) A phantom node formulation with mixed mode cohesive law for splitting in laminates. Int J Fract 158(2):107–124. doi:10.1007/s10704-009-9344-5 MATHCrossRef

63.

Blanco N, Turon A, Costa J (2006) An exact solution for the determination of the mode mixture in the mixed-mode bending delamination test. Compos Sci Technol 66(10):1256–1258. doi:10.1016/j.compscitech.2005.10.028 CrossRef

64.

Tenchev RT, Falzon BG (2007) A correction to the analytical solution of the mixed-mode bending (MMB) problem. Compos Sci Technol 67(3–4):662–668. doi:10.1016/j.compscitech.2006.05.007 CrossRef

65.

Massabò R, Cox BN (2001) Unusual characteristics of mixed-mode delamination fracture in the presence of large-scale bridging. Mech Compos Mater Struct 8(1):61–80. doi:10.1080/107594101459833 CrossRef

66.

Szekrényes A, Uj J (2006) Comparison of some improved solutions for mixed-mode composite delamination coupons. Compos Struct 72(3):321–329. doi:10.1016/j.compstruct.2005.01.002 CrossRef

67.

Szekrényes A (2007) Improved analysis of unidirectional composite delamination specimens. Mech Mater 39(10):953–974. doi:10.1016/j.mechmat.2007.04.002 CrossRef

68.

Jones RM (1999) Mechanics of composite materials, 2nd edn. Taylor & Francis, Philadelphia

69.

Vannucci P, Verchery G (2001) A special class of uncoupled and quasi-homogeneous laminates. Compos Sci Technol 61(10):1465–1473. doi:10.1016/S0266-3538(01)00039-2 CrossRef

70.

Timoshenko SP (1984) Strength of materials: elementary theory and problems, vol 1. Krieger, Melbourne

71.

Cotterell B, Hbaieb K, Williams JG, Hadavinia H, Tropsa V (2006) The root rotation in double cantilever beam and peel tests. Mech Mater 38(7):571–584. doi:10.1016/j.mechmat.2005.11.001 CrossRef

72.

Andrews MG, Massabò R (2007) The effects of shear and near tip deformations on energy release rate and mode mixity of edge-cracked orthotropic layers. Eng Fract Mech 74(17):2700–2720. doi:10.1016/j.engfracmech.2007.01.013 CrossRef

Titel: An enhanced beam-theory model of the mixed-mode bending (MMB) test—Part I: Literature review and mechanical model
verfasst von: Stefano Bennati
Paolo Fisicaro
Paolo S. Valvo
Publikationsdatum: 01.03.2013
Verlag: Springer Netherlands
Erschienen in: Meccanica / Ausgabe 2/2013
Print ISSN: 0025-6455
Elektronische ISSN: 1572-9648
DOI: https://doi.org/10.1007/s11012-012-9686-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2013

Reflection coefficient of a dominant mode in a trifurcated duct of soft walls in the presence of mean flow

Two-temperature generalized thermoelasticity under ramp-type heating by finite element method

The worst response of mistuned bladed disk system using neural network and genetic algorithm

Experimental study on AE behavior of hydraulic concrete under compression

Radiation effects on mixed convection about a cone embedded in a porous medium filled with a nanofluid

Hamiltonian formulation of classical fields with fractional derivatives: revisited

Premium Partner

Marktübersichten