Analysis and reconstruction of a pulsed jet in crossflow by multi-plane snapshot POD

In this work, snapshot proper orthogonal decomposition (POD) is used to study a pulsed jet in crossflow where the velocity fields are extracted from stereoscopic particle image velocimetry (SPIV) results. The studied pulsed jet is characterized by a frequency f = 1 Hz, a Reynolds number Re _j  = 500 (based on the mean jet velocity \({\overline{U}_{j}}\) = 1.67 cm/s and a mean velocity ratio of R = 1). Pulsed jet and continuous jet are compared via mean velocity field trajectory and Q criterion. POD results of instantaneous, phase-averaged and fluctuating velocity fields are presented and compared in this paper. Snapshot POD applied on one plane allows us to distinguish an organization of the first spatial eigenmodes. A distinction between “natural modes” and “pulsed modes” is achieved with the results obtained by the pulsed and unforced jet. Secondly, the correlation tensor is established with four parallel planes (multi-plane snapshot POD) for the evaluation of volume spatial modes. These resulting modes are interpolated and the volume velocity field is reconstructed with a minimal number of modes for all the times of the pulsation period. These reconstructions are compared to orthogonal measurements to the transverse jet in order to validate the obtained three-dimensional velocity fields. Finally, this POD approach for the 3D flow field reconstruction from experimental data issued from planes parallel to the flow seems capable to extract relevant information from a complex three-dimensional flow and can be an alternative to tomo-PIV for large volume of measurement.