nach oben

Steel in Translation

Erschienen in:

01.04.2023

Application of Diffusive Saturation with Boron Together with Aluminum for Hardening of Die Tooling Made of 5KhNM Steel

verfasst von: I. P. Polyansky, I. G. Sizov, E. S. Mokriy

Erschienen in: Steel in Translation | Ausgabe 4/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The possibility of surface hardening of die tooling with boron together with aluminum is considered. Using the methods of metallographic and X-ray microanalysis, it was found that the boroaluminized layer has several structural zones, mainly consisting of Fe₂B crystals, which are located in the viscous aluminide part of the layer, and the wear resistance of boron aluminized steel is 15 times higher compared to heat-treated steel with a hardness of 54 HRC. Industrial tests have shown that the durability of boroaluminized die tooling increased by 1.5 times.

Vorheriger Artikel Improvement of Hot Rolling Technology to Reduce the “Rolled-in Scale” Defect

Nächster Artikel Structure of Modified Wear-Resistant Coatings and Technological Characteristics of Flux-Cored Wires

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Aliev, I.S., Alieva, L.I., Lobanov, A.I., and Savchin-skii, I.G., Ensuring the tooling durability, Metalloobrabotka, 2007, no. 5, pp. 22–28.

Demenok, O.B., Ganeev, A.A., Demenok, A.O., Kulakov, B.A., Analysis of working conditions of cast materials operating at 950–1000°C and requirements for stamping in isothermal conditions, Vestn. Yuzhno-Ural. Gos. Univ., 2014, vol. 14, no. 1, pp. 41–47.

Trakhtenberg, B.F., Stoikost’ shtampov i puti ee povysheniya (Durability of Stamping Tools and Methods of Its Enhancing), Kuibyshev: Kuibyshevskoe Knizhnoe Izd-vo, 1964.

Zubtsov, M.E. and Korsakov, V.D., Stoikost’ shtampov (Durability of Stamping Tools), Leningrad: Mashinostroenie, 1971.

Tylkin, M.A., Shtampy dlya goryachego deformirovaniya metallov (Stamps for Hot Metal Forming), Moscow: Vysshaya Shkola, 1977.

Gadalov, V.N., Klimov, D.V., Safonov, S.V., and Goretskii, V.V., Wearability study of deposited alloys at high temperatures, Perspektivnoe razvitie nauki, tekhniki i tekhnologii. Materialy 3-i Mezhdunarodnoi nauchno-prakticheskoi konferentsii (Prospective Development of Science, Engineering, and Technology: Proc. 3rd Int. Sci.-Pract. Conf.), Gorokhov, A.A., Ed., Kursk: Univ. Kniga, 2013, pp. 269–272.

Serezhkin, M.A. and Mel’nikov, E.L., Improvement of durability of drawing tools at fabrication of large-scale bottoms, Remont. Vosstanovlenie. Modernizatsiya, 2014, no. 12, pp. 7–11.

Gotlib, B.M. and Sergeev, R.F., Improvement of large-sized dies durability, Sovrem. Probl. Nauki Obraz., 2014, no. 6, p. 336.

Serezhkin, M.A. and Mel’nikov, E.L., Development of technology for improving the durability of large-sized dye matrices, Izv. Mosk. Gos. Tekh. Univ. MAMI, 2014, vol. 2, no. 1, pp. 214–221.

10.

Romanenko, E.F., Artemenko, Yu.A., and Barabonova, I.A., Analysis of methods for hardening and restoring a stamping tool, Yunost’ i znaniya. Sbornik nauchnykh trudov 3-i Mezhdunarodnoi molodezhnoi nauchnoi konferentsii (Youth and Knowledge: Proс. 3rd Int. Conf. of Young Scientists), Gorokhov, A.A., Ed., Kursk, 2016, pp. 428–432.

11.

Ivanov, V.I. and Nazarov, K.D., Increase in the hot forming tool durability, Tr. GOSNITI, 2016, vol. 124, no. 2, pp. 67–74.

12.

Gotlib, B.M. and Sergeev, R.F., Forging of large-scale products in hot dyes, Fundam. Issled., 2016, no. 2, pp. 33–37.

13.

Kokorin, V.N., Titov, Yu.A., and Morozov, O.I., Issues of improvement of dye durability due to hardening of working tool, Innovatsionnye tekhnologii v metalloobrabotke. Sbornik nauchnykh trudov (Innovative Technologies in Treatment of Metals), Ulyanovsk: Ul’yanovsk. Gos. Tekh. Univ., 2017, pp. 318–321.

14.

Goncharov, V.S., Kravtsova, E.A., and Klyuchko, S.L., Vacuum-diffusion methods of surface hardening of hot-deformation die impressions, Mashinostroitel’, 2003, no. 2, pp. 33–34.

15.

Emel’yanova, T.V., Gryzunov, V.I., Priimak, E.Yu., and Firsova, N.V., Hardening of surface layers of dye steels by boronizing, Uprochnyayushchie Tekhnol. Pokrytiya, 2017, vol. 13, no. 1, pp. 40–44.

16.

Emelyanova, T.V., Gryzunov, V.I., Priymak, E.Yu., and Firsova, N.V., Structure and properties of dye steel 4Kh5MFS after low temperature cyanidation, Upro-chnyayushchie Tekhnol. Pokrytiya, 2017, vol. 13, no. 4, pp. 180–185.

17.

Sizov, I.G., Smirnyagina, N.N., and Semenov, A.P., Special features of electron-beam boronizing of steels, Met. Sci. Heat Treat., 1999, vol. 41, no. 12, pp. 516–519. https://doi.org/10.1007/BF02466542CrossRef

18.

Bartkowska, A., Bartkowski, D., Swadźba, R., Przestacki, D., and Miklaszewski, A., Microstructure, chemical composition, wear, and corrosion resistance of FeB–Fe₂B–Fe₃B surface layers produced on Vanadis-6 steel using CO₂ laser, Int. J. Adv. Manuf. Technol., 2018, vol. 95, pp. 1763–1776. https://doi.org/10.1007/s00170-017-1304-zCrossRef

19.

Konstantinov, V.M., Dashkevich, V.G., and Koval’chuk, A.V., Influence of boriding on dimensional accuracy and fragility of surface precision parts made of cold work tool steels, Aktual. Probl. Mashinostr., 2017, vol. 4, no. 4, pp. 9–15.

20.

Krukovich, M.G., Prusakov, B.A., and Sizov, I.G. Plastichnost’ borirovannykh sloev (Plasticity of Boronized Layers), Moscow: Fizmatlit, 2010.

21.

Krukovich, M.G., Klochkov, N.P., Savel’eva, A.S., and Biryukov, V.P., Structural modification of boride layers, Nov. Mater. Tekhnol. Mashinostr., 2014, no, 19, pp. 65–71.

22.

Polyansky, I., Sizov, I., Lazareva, O., Volkov, A., and Maksimov, B., Impact study of electron-beam heating on the structure and properties of boroaluminized layers aimed at producing new composite coatings with special properties, Mater. Perform. Charact., 2020, vol. 9, no. 3, pp. 380–391. https://doi.org/10.1520/MPC20190094CrossRef

23.

Borisenok, G.V., Vasil’ev, L.A., and Voroshnin, L.G., Khimikotermicheskaya obrabotka metallov i splavov. Spravochnik (Chemical and Heat Treatment of Metals and Alloys), Moscow: Metallurgiya, 1981.

24.

Lyakhovich, L.S., Voroshnin, L.G., Panich, G.G., and Shcherbakov, E.D., Mnogokomponentnye diffuzionnye pokrytiya (Multicomponent Diffusion Coatings), Minsk: Nauka i Tekhnika, 1974.

25.

Bel’skii, E.I., Sitkevich, M.V., and Traimak, N.S., Uprochnenie litykh i deformirovannykh instrumental’nykh stalei (Hardening of Casted and Deformed Tool Steels), Minsk: Nauka i Tekhnika, 1982.

26.

Sizov I.G., Polyanskii, I.P., Mishigdorzhiin, U.L., and Makharov, D.M., Coating for boroaluminising of steel products, RF Patent no. 2459011, Byull. Izobret., 2018, no. 23.

27.

Sizov, I.G., Polyanskii, I.P., Mishigdorzhiin, U.L., and Makharov, D.M., The influence of composition of saturating pastes on the structure and properties of the boronaluminized layer, Obrab. Met.: Tekhnol., Oborud., Instrum., 2013, no. 1, pp. 22–26.

28.

Polyanskii, I.P., Mishigdorzhiin, U.L., and Sizov I.G., Studying the impact of technological parameters of boroaluminizing (temperature and time of processing) on the formation of layers on low-carbon steel, Problemy mekhaniki sovremennykh mashin. Materialy VII mezhdunarodnoi nauchnoi konferentsii (Problems of Mechanics of Modern Machines: Proc. 7th Int. Sci. Cofn.), Ulan-Ude, 2018, pp. 344–350.

29.

Prusakov, B.A., Terminologicheskii slovar’. Metally (Term Dictionary: Metals), MotorSich, 2005, vol. 2.

Titel: Application of Diffusive Saturation with Boron Together with Aluminum for Hardening of Die Tooling Made of 5KhNM Steel
verfasst von: I. P. Polyansky
I. G. Sizov
E. S. Mokriy
Publikationsdatum: 01.04.2023
Verlag: Pleiades Publishing
Erschienen in: Steel in Translation / Ausgabe 4/2023
Print ISSN: 0967-0912
Elektronische ISSN: 1935-0988
DOI: https://doi.org/10.3103/S0967091223040162

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2023

Features of the Formation of the Structure and Properties of Powder Materials

Improvement of Hot Rolling Technology to Reduce the “Rolled-in Scale” Defect

Testing Corset Shape Specimens: the Best Method to Detect Thermal Fatigue of Items

Comparison of the Methodologies for Studying Ferrite Recrystallization Kinetics in Continuous Annealing

Electric Isotropic Steel with Rated Magnetic Permeability, Coercive Force, High Magnetic and Mechanical Properties, and Improved Flatness

Development of the Technology for the Extraction of Zinc and Iron from Metallurgical Waste

Premium Partner

Marktübersichten