nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

25.06.2021 | Application

Application of machine vision method in tool wear monitoring

verfasst von: Ruitao Peng, Jiachen Liu, Xiuli Fu, Cuiya Liu, Linfeng Zhao

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 3-4/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Aiming at the low tool utilization rate caused by tool wear in the milling process, a tool wear automatic monitoring system based on machine vision is proposed. The tool wear images are automatically acquired by a charge-coupled device (CCD) camera. The system selects the image with obvious characteristics and cuts the wear area for processing, thus extracting the tool wear value. On one hand, the reliability of using the wear area of flank face as a technical index to judge the degree of tool wear is explored. On the other hand, the changes in the surface texture of workpiece are also analyzed by the gray-level co-occurrence matrix (GLCM) method. A milling experiment was carried out and the wear value measured by the monitoring system was compared with the real wear value. The result showed that the accuracy of the monitoring system met the industrial requirements. The wear area of the flank face and the wear width are consistent in trend under different cutting parameters, which means that the wear area of the flank face could be used as an index for judging the degree of tool wear. In addition, the characteristic parameters of the surface texture of workpiece change regularly with the tool wear, which shows that the tool wear can be characterized from another aspect.

Vorheriger Artikel Instantaneous milling force prediction and valuation of end milling based on friction angle in orthogonal cutting

Nächster Artikel Effect of ball burnishing process on mechanical properties and impact behavior of S355JR steel

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Li Q, Gong Y, Cai M, Liu M (2017) Research on surface integrity in milling Inconel718 superalloy. Int J Adv Manuf Technol 92:1449–1463. https://doi.org/10.1007/s00170-017-0080-0CrossRef

Javed K, Gouriveau R, Li X, Zerhouni N (2018) Tool wear monitoring and prognostics challenges: a comparison of connectionist methods toward an adaptive ensemble model. J Intell Manuf 29:1873–1890. https://doi.org/10.1007/s10845-016-1221-2CrossRef

Liu C, Wang GF, Li ZM (2015) Incremental learning for online tool condition monitoring using ellipsoid ARTMAP network model. Appl Soft Comput 35:186–198. https://doi.org/10.1016/j.asoc.2015.06.023CrossRef

Vetrichelvan G, Sundaram S, Kumaran SS, Velmurugan P (2015) An investigation of tool wear using acoustic emission and genetic algorithm. J Vib Control 21:3061–3066. https://doi.org/10.1177/1077546314520835CrossRef

Malekian M, Park SS, Jun MBG (2009) Tool wear monitoring of micro-milling operations. J Mater Process Technol 209(10):4903–4914. https://doi.org/10.1016/j.jmatprotec.2009.01.013CrossRef

Salonitis K, Kolios A (2014) Reliability assessment of cutting tool life based on surrogate approximation methods. Int J Adv Manuf Technol 71(5):1197–1208. https://doi.org/10.1007/s00170-013-5560-2CrossRef

Karandikar J, Mcleay T, Turner S, Schmitz T (2015) Tool wear monitoring using naïve Bayes classifiers. Int J Adv Manuf Technol 77(9-12):1613–1626. https://doi.org/10.1007/s00170-014-6560-6CrossRef

Aliustaoglu C, Ertunc HM, Ocak H (2009) Tool wear condition monitoring using a sensor fusion model based on fuzzy inference system. Mech Syst Signal Process 23:539–546. https://doi.org/10.1016/j.ymssp.2008.02.010CrossRef

Peng R, Pang H, Jiang H, Hu Y (2020) Study of tool wear monitoring using machine vision. Autom Control Comput Sci 54(3):259–270. https://doi.org/10.3103/S0146411620030062CrossRef

10.

Zhang Y, Zhu K, Duan X, Li S (2021) Tool wear estimation and life prognostics in milling: model extension and generalization. Mech Syst Signal Process 155(2):107617. https://doi.org/10.1016/j.ymssp.2021.107617CrossRef

11.

Gomes MC, Brito LC, Silva MBD, Duarte MAV (2021) Tool wear monitoring in micromilling using support vector machine with vibration and sound sensors. Precis Eng 67:137–151. https://doi.org/10.1016/j.precisioneng.2020.09.025CrossRef

12.

Móricz L, Viharos Z, Németh A, Szépligeti A, Büki M (2020) Off-line geometrical and microscopic & on-line vibration based cutting tool wear analysis for micro-milling of ceramics. Measurement 163:108025. https://doi.org/10.1016/j.measurement.2020.108025CrossRef

13.

Zhou C, Guo K, Zhao Y, Zan Z, Sun J (2020) Development and testing of a wireless rotating triaxial vibration measuring tool holder system for milling process. Measurement 163(15):108034. https://doi.org/10.1016/j.measurement.2020.108034CrossRef

14.

Yang Y, Hao B, Hao X, Liang L, Chen N, Xu T, Aqib KM, He N (2020) A novel tool (single-flute) condition monitoring method for end milling process based on intelligent processing of milling force data by machine learning algorithms. Int J Precis Eng Manuf 21(11):1–13. https://doi.org/10.1007/s12541-020-00388-8CrossRef

15.

Zhou Y, Sun B, Sun W (2020) A tool condition monitoring method based on two-layer angle kernel extreme learning machine and binary differential evolution for milling. Measurement 166:108186. https://doi.org/10.1016/j.measurement.2020.108186CrossRef

16.

García-Ordás MT, Alegre E, González-Castro V, Alaiz-Rodríguez R (2016) A computer vision approach to analyze and classify tool wear level in milling processes using shape descriptors and machine learning techniques. Int J Adv Manuf Technol 90:1947–1961. https://doi.org/10.1007/s00170-016-9541-0CrossRef

17.

Yu X, Lin X, Dai Y, Zhu K (2017) Image edge detection based tool condition monitoring with morphological component analysis. ISA Trans 69:315–322. https://doi.org/10.1016/j.isatra.2017.03.024CrossRef

18.

Zhu K, Yu X (2017) The monitoring of micro milling tool wear conditions by wear area estimation. Mech Syst Signal Process 93:80–91. https://doi.org/10.1016/j.ymssp.2017.02.004CrossRef

19.

García-Ordás MT, Alegre-Gutiérrez E, Alaiz-Rodríguez R, González-Castro V (2018) Tool wear monitoring using an online, automatic and low cost system based on local texture. Mech Syst Signal Process 112:98–112. https://doi.org/10.1016/j.ymssp.2018.04.035CrossRef

20.

Fong KM, Wang X, Kamaruddin S, Ismadi MZ (2021) Investigation on universal tool wear measurement technique using image-based cross-correlation analysis. Measurement 169:108489. https://doi.org/10.1016/j.measurement.2020.108489CrossRef

21.

Qin A, Guo L, You Z, Gao H, Xiang S (2020) Research on automatic monitoring method of face milling cutter wear based on dynamic image sequence. Int J Adv Manuf Technol 110(11-12):1–12. https://doi.org/10.1007/s00170-020-05955-xCrossRef

22.

You Z, Gao H, Guo L, Liu Y, Li J (2020) On-line milling cutter wear monitoring in a wide field-of-view camera. Wear 460-461:203479. https://doi.org/10.1016/j.wear.2020.203479CrossRef

23.

Mamledesai H, Soriano MA, Ahmad R (2020) A qualitative tool condition monitoring framework using convolution neural network and transfer learning. Appl Sci 10(20):7298. https://doi.org/10.3390/app10207298CrossRef

24.

Pagani L, Parenti P, Cataldo S, Scott PJ, Annoni M (2020) Indirect cutting tool wear classification using deep learning and chip colour analysis. Int J Adv Manuf Technol 111(3):1099–1114. https://doi.org/10.1007/s00170-020-06055-6CrossRef

25.

Kasim MS, Che Haron CH, Ghani JA, Sulaiman MA, Yazid MZA (2013) Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718. Wear 302(1-2):1171–1179. https://doi.org/10.1016/j.wear.2012.12.040CrossRef

26.

Wang F, Li L, Liu J, Shu Q (2017) Research on tool wear of milling nickel-based superalloy in cryogenic. Int J Adv Manuf Technol 91:3877–3886. https://doi.org/10.1007/s00170-017-0079-6CrossRef

27.

Dias LRM, Diniz AE (2013) Effect of the gray cast iron microstructure on milling tool life and cutting force. J Braz Soc Mech Sci 35(1):17–29. https://doi.org/10.1007/s40430-013-0004-3CrossRef

28.

Wang Z, Bovik AC, Sheikh HR, Simoncelli EP (2014) Image quality assessment: from error visibility to structural similarity. IEEE Trans Ind Electron 13:600–612. https://doi.org/10.1109/TIP.2003.819861CrossRef

29.

Kurada S, Bradley C (1997) A machine vision system for tool wear assessment. Tribol Int 30(4):295–304. https://doi.org/10.1016/S0301-679X(96)00058-8CrossRef

30.

Otsu N (2007) A threshold selection method from gray-level histograms. IEEE Trans Syst Man Cybern-Syst 9(1):62–66. https://doi.org/10.1109/TSMC.1979.4310076MathSciNetCrossRef

31.

Antic A, Popovic B, Krstanovic L, Obradovic R, Milosevic M (2018) Novel texture-based descriptors for tool wear condition monitoring. Mech Syst Signal Process 98:1–15. https://doi.org/10.1016/j.ymssp.2017.04.030CrossRef

32.

Li LH, An QB (2016) An in-depth study of tool wear monitoring technique based on image segmentation and texture analysis. Measurement 79:44–52. https://doi.org/10.1016/j.measurement.2015.10.029CrossRef

33.

Julesz B (1981) Textons, the elements of texture perception, and their interactions. Nature 290:91–97. https://doi.org/10.1353/cjm.2014.0023CrossRef

34.

Peng R, Liu K, Tang X, Liao M, Hu Y (2019) Effect of prestress on cutting of nickel-based superalloy GH4169. Int J Adv Manuf Technol 100:813–825. https://doi.org/10.1007/s00170-018-2746-7CrossRef

Titel: Application of machine vision method in tool wear monitoring
verfasst von: Ruitao Peng
Jiachen Liu
Xiuli Fu
Cuiya Liu
Linfeng Zhao
Publikationsdatum: 25.06.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 3-4/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07522-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3-4/2021

Structure and properties of АА7075-SiC composite parts produced by cold spray additive manufacturing

Research on intelligent generation method of process dimension based on feature constraint

Real-time event-based platform for the development of digital twin applications

The flexible rolling process of three-dimensional curved parts using an auxiliary plate based on rigid arc-shaped rollers

Effect of resin lamination on tensile strength characteristics of SUS304 stainless steel thin film

Joining thin-walled structures without protuberance by two-strokes flattening clinching process

Premium Partner

Marktübersichten