nach oben

Erschienen in:

31.10.2023 | Original Paper

Application of Several Fuzzy-Based Techniques for Estimating Tunnel Boring Machine Performance in Metamorphic Rocks

verfasst von: Hanan Samadi, Arsalan Mahmoodzadeh, Adil Hussein Mohammed, Farhan A. Alenizi, Hawkar Hashim Ibrahim, Mojtaba Nematollahi, Ahmed Babeker Elhag

Erschienen in: Rock Mechanics and Rock Engineering | Ausgabe 2/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Tunnel boring machine (TBM) performance prediction in mechanized tunneling is an essential factor for selecting an appropriate excavation machine, tunnel design, and safe construction. To implement safe mechanized excavation, it is important to accurately assess and predict the range of machine driving parameters, especially the machine rate of penetration (ROP); this can reduce the cost of TBM repairs due to the abrasion of disc cutters and cutterhead and also has a positive effect on the post-construction period. This study focuses on predicting the ROP of TBMs passing through metamorphic rocks during deep excavation and under a complex geotechnical situation. For this purpose, three fuzzy-based models of the Mamdani fuzzy inference system (MFIS), adaptive neuro-fuzzy inference system (ANFIS), Takagi Sugeno fuzzy model (TSF), as well as linear and non-linear regression models were developed. Historical tunnels were used to compile 189 data points (151 for training and 37 for testing). In the dataset, three parameters, including uniaxial compressive strength (UCS), cutterhead rotational speed per minute (RPM), and thrust force (TF), were considered effective parameters on the TBM’s ROP. According to the findings, the suggested models provided satisfactory and consistent accuracy. Moreover, the results demonstrated that the forecasted values correlate rather well with the measured ones. The proposed algorithms can be considered for use in similar ground and tunneling conditions (metamorphic rocks with low-average strength). It is worth noting that this study has the potential to drastically cut down on tunneling uncertainties and makes fuzzy inference systems a robust algorithm for planning mechanized tunneling.

Vorheriger Artikel An Experimental and Numerical Study of Layered Sandstone's Anisotropic Behaviour Under Compressive and Tensile Stress Conditions

Nächster Artikel Paint Speckle Application Recommendations for Digital Image Correlation Analysis of Brazilian Tensile Strength Tests on Low-Porosity Rocks

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Adoko AC, Yagiz S (2019) Fuzzy inference system-based for TBM field penetration index estimation in rock mass. Geotech Geol Eng 37:1533–1553. https://doi.org/10.1007/s10706-018-0706-5CrossRef

Alber M (2000) Advance rates of hard rock TBM’s and their effect on project economics. Tunn Undergr Space Technol 15(1):55–64. https://doi.org/10.1016/S0886-7798(00)00029-8CrossRefADS

Ates U, Bilgin N, Copur H (2014) Estimating torque, thrust and other design parameters of different type TBMs with some criticism to TBMs used in Turkish tunneling projects. Tunn Undergr Space Technol 40:46–63. https://doi.org/10.1016/j.tust.2013.09.004CrossRef

Barla G (2000) Lessons learnt from the excavation of a large diameter TBM tunnel in complex hydrogeological conditions. In: ISRM International Symposium, OnePetro

Barton N (2000) TBM tunnelling in jointed and faulted rock. ISBN 9789058093417. p 184

Benardos A, Kaliampakos DC (2004) Modelling TBM performance with artificial neural networks. Tunn Undergr Space Technol 19:597–605. https://doi.org/10.1016/j.tust.2004.02.128CrossRef

Benato A, Oreste P (2015) Prediction of penetration per revolution in TBM tunneling as a function of intact rock and rock mass characteristics. Int J Rock Mech Min Sci 74:119–127. https://doi.org/10.1016/j.ijrmms.2014.12.007CrossRef

Bieniawski ZT, Celada B, Galera JM (2007) TBM excavability: prediction and machine-rock interaction. Proc Rapid Excav Tunn Conf 1118:1118–1130

Bilgin N, Copur H, Balci C, Tumac D, Akgul M, Yuksel A (2008) The selection of a TBM using full scale laboratory tests and comparison of measured and predicted performance values in Istanbul Kozyatagi-Kadikoy metro tunnels. In World Tunnel Congress, India, pp 1509–1517

Bruines P (1988) Neuro-fuzzy modelling of TBM performance with emphasis on the penetration rate. Memoirs of the Centre of Engineering Geology, Delft, p 173

Bruland A (1998) Hard rock tunnel boring. Ph.D. Thesis. Norwegian University of Science and Technology, Trondheim

Chai Y, Jia L, Zhang Z (2009) Mamdani model based adaptive neural fuzzy inference system and its application in traffic level of service evaluation. Sixth Int Conf Fuzzy Syst Knowl Discov 4:555–559

Cheng F, Li J, Zhou L, Lin G (2023) Fragility analysis of nuclear power plant structure under real and spectrum-compatible seismic waves considering soil-structure interaction effect. Eng Struct 280:115684. https://doi.org/10.1016/j.engstruct.2023.115684CrossRef

Codd EF (1971) Normalized data base structure: a brief tutorial. In: Proceedings of the 1971 ACM SIGFIDET (now SIGMOD) workshop on data description, access and control. P 1–17. https://doi.org/10.1145/1734714.1734716

Date CJ (1999) An introduction to database systems. Addison-Wesley, p 290

Elhaik E (2022) Principal component analyses (PCA)-based findings in population genetic studies are highly biased and must be reevaluated. Sci Rep. https://doi.org/10.1038/s41598-022-14395-4CrossRefPubMedPubMedCentral

Farmer IW, Garritty P (1987) Prediction of roadheader cutting performance from fracture toughness considerations. In: 6th ISRM Congress, OnePetro

Farmer IW, Glossop NH (1980) Mechanics of disc cutter penetration. Tunn Tunn UK 12(6):22-25

Farrokh E, Rostami J (2009) Effect of adverse geological condition on TBM operation in Ghomroud tunnel conveyance project. Tunn Undergr Space Technol 24(4):436–446. https://doi.org/10.1016/j.tust.2008.12.006CrossRef

Fu Q, Gu M, Yuan J, Lin Y (2022) Experimental study on vibration velocity of piled raft supported embankment and foundation for ballastless high speed railway. Buildings 12(11):1982. https://doi.org/10.3390/buildings12111982CrossRef

Gao X, Shi M, Song X, Zhang C, Zhang H (2020) Recurrent neural networks for real-time prediction of TBM operating parameters. Autom Constr 98:225–235. https://doi.org/10.1016/j.autcon.2018.11.013CrossRef

Ghasemi E, Yagiz S, Ataei M (2014) Predicting penetration rate of hard rock tunnel boring machine using fuzzy logic. Bull Eng Geol Env 73:23–35. https://doi.org/10.1007/s10064-013-0497-0CrossRef

Gokceoglu C (2022) Assessment of rate of penetration of a tunnel boring machine in the longest railway tunnel of Turkey. SN Applied Sciences 4(1):19. https://doi.org/10.1007/s42452-021-04903-yCrossRef

Gong Q, Zhao J (2009) Development of a rock mass characteristics model for TBM penetration rate prediction. Int J Rock Mech Min Sci 46(1):8–18. https://doi.org/10.1016/j.ijrmms.2008.03.003CrossRef

Grima MA, Bruines PA, Verhoef PNW (2000) Modeling tunnel boring machine performance by neuro-fuzzy methods. Tunn Undergr Space Technol 15(3):259–269. https://doi.org/10.1016/S0886-7798(00)00055-9CrossRef

Habashy DM, Lebda HI (2022) Comparison between artificial neural network and adaptive neuro-fuzzy inference system for the baryon-to-meson ratios in proton-proton collisions. arXiv preprint arXiv:2209.12709. https://doi.org/10.48550/arXiv.2209.12709

Hassanpour J, Rostami J, Khamehchiyan M, Bruland A (2009) Developing new equations for TBM performance prediction in carbonate-argillaceous rocks: a case history of Nowsood water conveyance tunnel. Int J Geomech Geoeng 4:287–297. https://doi.org/10.1080/17486020903174303CrossRef

Hassanpour J, Rostami J, Khamehchiyan M, Bruland A, Tavakoli HR (2010) TBM performance analysis in pyroclastic rocks: a case history of Karaj water conveyance tunnel. Rock Mech Rock Eng 43:427–445. https://doi.org/10.1007/s00603-009-0060-2CrossRefADS

Hassanpour J, Rostami J, Zhao J (2011) A new hard rock TBM performance prediction model for project planning. Tunn Undergr Space Technol 26(5):595–603. https://doi.org/10.1016/j.tust.2011.04.004CrossRef

Howart DF (1994) Database of TBM projects undertaken between 1950 and 1990 and an assessment of associated ground-strength limitations. Tunn Undergr Space Technol 9(2):209–213. https://doi.org/10.1016/0886-7798(94)90032-9CrossRef

Jang R (1991) Fuzzy modeling using generalized neural networks and Kalman filter algorithm. In: Proceedings of the 9th National Conference on Artificial Intelligence. USA, p 762–767

Jang JS (1993) ANFIS: adaptive-network-based fuzzy inference system. IEEE Trans Syst Man Cybern 23(3):665–685. https://doi.org/10.1109/21.256541CrossRef

Jia S, Dai Z, Zhou Z, Ling H, Yang Z, Qi L, Wang Z, Zhang X, Thanh HV, Soltanian MR (2023) Upscaling dispersivity for conservative solute transport in naturally fractured media. Water Res 235:119844. https://doi.org/10.1016/j.watres.2023.119844CrossRefPubMed

Jolliffe LT, Cadima J (2016) Principal component analysis: a review and recent developments. Philos Trans R Soc A Math Phys Eng Sci. https://doi.org/10.1098/rsta.2015.0202CrossRef

Kahraman S (2007) Historical review of tunnel boring machine (TBM) data. CIM Mag 2(1)

Kalnins A (2022) When does multicollinearity bias coefficients and cause type 1 errors? A reconciliation of Lindner, Puck, and Verbeke (2020) with Kalnins (2018). J Int Bus Stud 53(7):1536–1548. https://doi.org/10.1057/s41267-022-00531-9CrossRef

Li J, Chen M, Li Z (2022a) Improved soil–structure interaction model considering time-lag effect. Comput Geotech 148:104835. https://doi.org/10.1016/j.compgeo.2022.104835CrossRef

Li R, Wu X, Tian H, Yu N, Wang C (2022b) Hybrid memetic pretrained factor analysis-based deep belief networks for transient electromagnetic inversion. IEEE Trans Geosci Remote Sens 60:1–20. https://doi.org/10.1109/TGRS.2022.3208465CrossRef

Li X, Du C, Wang X, Zhang J (2023) Quantitative determination of high-order crack fabric in rock plane. Rock Mech Rock Eng. https://doi.org/10.1007/s00603-023-03319-xCrossRef

Liu J, Ren J, Guo W (2015) Thrust and torque characteristics based on a new cutter-head load model. Chin J Mech Eng 28(4):801–809. https://doi.org/10.3901/CJME.2015.0504.066CrossRef

Liu C, Cui J, Zhang Z, Liu H, Huang X, Zhang C (2021) The role of TBM asymmetric tail-grouting on surface settlement in coarse-grained soils of urban area: field tests and FEA modelling. Tunn Undergr Space Technol 111:103857. https://doi.org/10.1016/j.tust.2021.103857CrossRef

Liu Y, Li J, Lin G (2023a) Seismic performance of advanced three-dimensional base-isolated nuclear structures in complex-layered sites. Eng Struct 289:116247. https://doi.org/10.1016/j.engstruct.2023.116247CrossRef

Liu C, Peng Z, Cui J, Huang X, Li Y, Chen W (2023b) Development of crack and damage in shield tunnel lining under seismic loading: refined 3D finite element modeling and analyses. Thin-Walled Struct 185:110647. https://doi.org/10.1016/j.tws.2023.110647CrossRef

Mahmoodzadeh M, Taghizadeh M, Mohammed AH, Ibrahim HH, Samadi H, Mohammadi M, Rashidi S (2022) Tunnel wall convergence prediction using optimized LSTM deep neural network. Geomech Eng 31(6):545–556. https://doi.org/10.12989/gae.2022.31.6.545CrossRef

Malli T, Mizrak Özfirat P, Yetkin ME, Özfirat MK (2021) Truck selection with the fuzzy-WSM method in transportation systems of open pit mines. Tehnicki Vjesnik-Technical Gazette 28(1):58–64. https://doi.org/10.17559/TV-20190910100025CrossRef

Mamdani M (1974) The ideology of population control. Concerned Demogr 4(2):13–22 (PMID: 12307029)PubMed

Manafiazar A, Khamehchiyan M, Nadiri A, Sharifikia M (2023) Learning simple additive weighting parameters for subsidence vulnerability indices in Tehran plain (Iran) by artificial intelligence methods. Eur J Environ Civ Eng. https://doi.org/10.1080/19648189.2023.2205914CrossRef

Michael JR (1983) The stabilized probability plot. Biometrika 70(1):11–17MathSciNetCrossRef

Ozdemir L (1977) Development of theoretical equations for predicting tunnel boreability. Ph.D. thesis. Colorado School of Mines, Colorado, USA

Peng J, Xu C, Dai B, Sun L, Feng J, Huang Q (2022) Numerical investigation of brittleness effect on strength and microcracking behavior of crystalline rock. Int J Geomech. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002529CrossRef

Ren C, Yu J, Liu S, Yao W, Zhu Y, Liu X (2022) A plastic strain-induced damage model of porous rock suitable for different stress paths. Rock Mech Rock Eng 55(4):1887–1906. https://doi.org/10.1007/s00603-022-02775-1CrossRefADS

Ren C, Yu J, Zhang C, Liu X, Zhu Y, Yao W (2023) Micro–macro approach of anisotropic damage: a semi-analytical constitutive model of porous cracked rock. Eng Fract Mech 290:109483. https://doi.org/10.1016/j.engfracmech.2023.109483CrossRef

Rostami J (1997) Development of a force estimation model for rock fragmentation with disc cutters through theoretical modeling and physical measurement of crushed zone pressure. Ph.D. thesis. Colorado School of Mines, Colorado, USA

Rostami J, Ozdemir L (1993) A new model for performance prediction of hard rock TBM. Proceedings of RETC. Boston, MA, p 793–809

Sada SO, Ikpeseni SC (2021) Evaluation of ANN and ANFIS modeling ability in the prediction of AISI 1050 steel machining performance. Heliyon 7(2):06136. https://doi.org/10.1016/j.heliyon.2021.e06136CrossRef

Samadi H, Hassanpour J (2021) Developing the empirical models for predicting the EPB operating parameters in strong limestone. Sci Q J Iran Assoc Eng Geol 15(1):29–41

Samadi H, Hassanpour J, Tarigh Azali S (2022) Developing GEP technique for prediction of EPB-TBM performance in limestone strata. TBMDigs 2022, Austria, p 158–164

Sanchez-Torrubia MG, Torres-Blanc C, Escribano-Blanco S (2010) GRAPHs: a learning environment for graph algorithm simulation primed for automatic fuzzy assessment. In: Proceedings of the 10th Koli Calling international conference on computing education research. p 62–67

Sanio HP (1985) Prediction of the performance of disc cutters in anisotropic rock. Int J Rock Mech Min Sci Geomech Abstr 22(3):153–161. https://doi.org/10.1016/0148-9062(85)93229-2CrossRef

Shao C, Li X, Su H (2013) Performance prediction of hard rock TBM based on extreme learning machine. Intelligent robotics and applications: 6th international conference. Springer Berlin Heidelberg, Busan, South Korea, pp 409–416CrossRef

Shorack GR, Wellner JA (1986) Empirical processes with applications to statistics. Wiley, pp 248–250

Simpson PK (1990) Artificial neural system: foundation, paradigm, application and implementations. Pergamon Press, New York

Takagi T, Sugeno M (1985) Fuzzy identification of systems and its applications to modeling and control. IEEE Trans Syst Man Cybern 1:116–132. https://doi.org/10.1109/TSMC.1985.6313399CrossRef

Tang H, Yang Y, Li H, Xiao L, Ge Y (2023) Effects of chloride salt erosion and freeze–thaw cycle on interface shear behavior between ordinary concrete and self-compacting concrete. Structures 56:104990. https://doi.org/10.1016/j.istruc.2023.104990CrossRef

Tortum A, Yayla N, Gökdağ M (2009) The modeling of mode choices of intercity freight transportation with the artificial neural networks and adaptive neuro-fuzzy inference system. Expert Syst Appl 36(3):6199–6217. https://doi.org/10.1016/j.eswa.2008.07.032CrossRef

Wen S, Liu HZ, Zhao LM (2012) Risk analysis on the accident of TBM’s cutterhead jamming caused by collapse of tunnel. Adv Mater Res 446:2246–2250. https://doi.org/10.4028/www.scientific.net/AMR.446-449.2246CrossRef

Wilk MB, Gnanadesikan R (1968) Probability plotting methods for the analysis for the analysis of data. Biometrika 55(1):1–17. https://doi.org/10.1093/biomet/55.1.1CrossRefPubMed

Xia Y, Shi M, Zhang C, Wang C, Sang X, Liu R, Zhao P, An G, Fang H (2022) Analysis of flexural failure mechanism of ultraviolet cured-in-place-pipe materials for buried pipelines rehabilitation based on curing temperature monitoring. Eng Fail Anal 142:106763. https://doi.org/10.1016/j.engfailanal.2022.106763CrossRef

Xu H, Zhou J, Asteris PG, Armaghani D, Tahir MM (2019) Supervised machine learning techniques to the prediction of tunnel boring machine penetration rate. Appl Sci 9(18):3715. https://doi.org/10.3390/app9183715CrossRef

Xu Z, Li X, Li J, Xue Y, Jiang S, Liu L, Luo Q, Wu K, Zhang N, Feng Y, Shao M, Jia K, Sun Q (2022a) Characteristics of source rocks and genetic origins of natural gas in deep formations, gudian depression, Songliao Basin, NE China. ACS Earth Space Chem 6(7):1750–1771. https://doi.org/10.1021/acsearthspacechem.2c00065CrossRefADS

Xu L, Cai M, Dong S, Yin S, Xiao T, Dai Z, Wang Y, Reza Soltanian M (2022b) An upscaling approach to predict mine water inflow from roof sandstone aquifers. J Hydrol 612:128314. https://doi.org/10.1016/j.jhydrol.2022.128314CrossRef

Yagiz S (2002) Development of rock fracture and brittleness indices to quantify the effects of rock mass features and toughness in the CSM Model basic penetration for hard rock tunneling machines. Ph.D. thesis. Colorado School of Mines, Colorado, USA, p 289

Yagiz S (2006) TBM performance prediction based on rock properties. Proc Multiphys Coupling Long Term Behav Rock Mech EUROCK 6:663–670

Yagiz S (2008) Utilizing rock mass properties for predicting TBM performance in hard rock condition. Tunn Undergr Space Technol 23(3):326–339. https://doi.org/10.1016/j.tust.2007.04.011CrossRef

Yagiz S, Karahan H (2011) Prediction of hard rock TBM penetration rate using particle swarm optimization. Int J Rock Mech Min Sci 48(3):427–433. https://doi.org/10.1016/j.ijrmms.2011.02.013CrossRef

Yagiz S, Gokceoglu C, Sezer E, Iplikci S (2009) Application of two non-linear prediction tools to the estimation of tunnel boring machine performance. Eng Appl Artif Intell 22(4–5):808–814. https://doi.org/10.1016/j.engappai.2009.03.007CrossRef

Yang H, Wang H, Zhou X (2016) Analysis on the rock–cutter interaction mechanism during the TBM tunneling process. Rock Mech Rock Eng 49:1073–1090. https://doi.org/10.1007/s00603-015-0796-9CrossRefADS

Yang SQ, Chen M, Fang G, Wang YC, Meng B, Li YH, Jing HW (2018) Physical experiment and numerical modelling of tunnel excavation in slanted upper-soft and lower-hard strata. Tunn Undergr Space Technol 82:248–264. https://doi.org/10.1016/j.tust.2018.08.049CrossRef

Yang Z, Xu J, Feng Q, Liu W, He P, Fu S (2022) Elastoplastic analytical solution for the stress and deformation of the surrounding rock in cold region tunnels considering the influence of the temperature field. Int J Geomech. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002466CrossRef

Yao W, Yu J, Liu X, Zhang Z, Feng X, Cai Y (2023) Experimental and theoretical investigation of coupled damage of rock under combined disturbance. Int J Rock Mech Min Sci 164:105355. https://doi.org/10.1016/j.ijrmms.2023.105355CrossRef

Yetkin ME, Simsir F, Ozfirat MK, Ozfirat PM, Yenice H (2016) A fuzzy approach to selecting roof supports in longwall mining. S Afr J Ind Eng 27(1):162–177

Yin H, Wu Q, Yin S, Dong S, Dai Z, Soltanian MR (2023a) Predicting mine water inrush accidents based on water level anomalies of borehole groups using long short-term memory and isolation forest. J Hydrol 616:128813. https://doi.org/10.1016/j.jhydrol.2022.128813CrossRef

Yin H, Zhang G, Wu Q, Yin S, Soltanian MR, Thanh HV, Dai Z (2023b) A deep learning-based data-driven approach for predicting mining water inrush from coal seam floor using micro-seismic monitoring data. IEEE Trans Geosci Remote Sens. https://doi.org/10.1109/TGRS.2023.3300012CrossRef

Yu J, Zhu Y, Yao W, Liu X, Ren C, Cai Y, Tang X (2021) Stress relaxation behavior of marble under cyclic weak disturbance and confining pressures. Measurement 182:109777. https://doi.org/10.1016/j.measurement.2021.109777CrossRef

Zhan C, Dai Z, Soltanian MR, de Barros FPJ (2022) Data-Worth analysis for heterogeneous subsurface structure identification with a stochastic deep learning framework. Water Resour Res. https://doi.org/10.1029/2022WR033241CrossRef

Zhang X, Ma F, Dai Z, Wang J, Chen L, Ling H, Soltanian MR (2022a) Radionuclide transport in multi-scale fractured rocks: a review. J Hazard Mater 424:127550. https://doi.org/10.1016/j.jhazmat.2021.127550CrossRefPubMed

Zhang X, Wang Z, Reimus P, Ma F, Soltanian MR, Xing B, Zang J, Wang Y, Dai Z (2022b) Plutonium reactive transport in fractured granite: Multi-species experiments and simulations. Water Res 224:119068. https://doi.org/10.1016/j.watres.2022.119068CrossRefPubMed

Zhang K, Wang Z, Chen G, Zhang L, Yang Y, Yao C, Wang J, Yao J (2022c) Training effective deep reinforcement learning agents for real-time life-cycle production optimization. J Petrol Sci Eng 208:109766. https://doi.org/10.1016/j.petrol.2021.109766CrossRef

Zhou J, Qiu Y, Zhu S, Armaghani DJ, Khandelwal M, Mohamad ET (2021) Estimation of the TBM advance rate under hard rock conditions using XGBoost and Bayesian optimization. Undergr Space 6(5):506–515. https://doi.org/10.1016/j.undsp.2020.05.008CrossRef

Titel: Application of Several Fuzzy-Based Techniques for Estimating Tunnel Boring Machine Performance in Metamorphic Rocks
verfasst von: Hanan Samadi
Arsalan Mahmoodzadeh
Adil Hussein Mohammed
Farhan A. Alenizi
Hawkar Hashim Ibrahim
Mojtaba Nematollahi
Ahmed Babeker Elhag
Publikationsdatum: 31.10.2023
Verlag: Springer Vienna
Erschienen in: Rock Mechanics and Rock Engineering / Ausgabe 2/2024
Print ISSN: 0723-2632
Elektronische ISSN: 1434-453X
DOI: https://doi.org/10.1007/s00603-023-03602-x

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2024

A New Volumetric Strain-Based Method for Determining the Crack Initiation Threshold of Rocks Under Compression

Correction to: Correcting the Permeability Evaluation of Elliptical Rock Fractures in Triaxial Shear-Flow Experiments Considering Channeling Flow

Evaluation of Optimum Burden for the Excavation of Narrow Vein Ore Deposits Using Numerical Simulation

The Rock-Breaking Mechanism of Thermal Spalling-Assisted Rock Cutting by PDC Cutter

Stability Analysis of Salt Structure Drilling and Its Application to the Keshen 10 Block of Kuqa Depression in Tarim Basin

Discussion on “On the Measurement of B for a Sandstone” [Rock Mech Rock Eng 56:6127–6133]