nach oben

Journal of Intelligent Manufacturing

Erschienen in:

24.05.2023

Attention-driven transfer learning framework for dynamic model guided time domain chatter detection

verfasst von: Chen Yin, Yulin Wang, Jeong Hoon Ko, Heow Pueh Lee, Yuxin Sun

Erschienen in: Journal of Intelligent Manufacturing | Ausgabe 4/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Online chatter detection is crucial to ensure the quality and safety of the high-speed milling process. The rapid development of the deep learning community provides a promising tool for chatter detection. However, most previous chatter detection studies rely on complex signal processing techniques, leading to the separation of feature extraction and chatter detection and reducing detection efficiency. Additionally, these studies are developed for a limited range of machining conditions because the development of their model relies on experimental data, while performing experiments with numerous combinations of machining parameters is expensive and time-consuming. To tackle these drawbacks, this paper proposes a transfer learning chatter detection framework that doesn’t rely on any experimental data. The proposed framework is composed of the dynamic milling process model, the Double Attention-driven One-Dimension Convolutional Neural Networks (DAOCNN), and the ensemble prediction strategy. Firstly, a dynamic milling process model is established to generate simulated cutting force signals over a wide range of machining parameters, providing abundant training data and saving experimental costs. Then, without any complex signal processing method, the detection results are directly predicted by the proposed DAOCNN from the time-domain signals, eliminating the separation of feature extraction and chatter detection. Finally, a novel ensemble prediction strategy is proposed to ensure an accurate and robust prediction. To validate the effectiveness of the proposed framework, actual milling experiments are carried out under different cutting conditions. Moreover, contrastive studies with other detection approaches and ensemble methods are also performed. The results demonstrate that the milling stability is correctly predicted by the proposed method in an accurate and efficient manner, which indicates the proposed framework can be a promising tool for online chatter detection.

Vorheriger Artikel Learning the manufacturing capabilities of machining and finishing processes using a deep neural network model

Nächster Artikel A multi-task learning-based optimization approach for finding diverse sets of microstructures with desired properties

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

BudakAltintas, E. Y. (1998a). Analytical prediction of chatter stability in milling—part II: Application of the general formulation to common milling systems. Journal of Dynamic Systems, Measurement, and Control, 120(1), 31–36. https://doi.org/10.1115/1.2801318CrossRef

BudakAltintas, E. Y. (1998b). Analytical prediction of chatter stability in milling—part I: General formulation. Journal of Dynamic Systems, Measurement, and Control, 120(1), 22–30. https://doi.org/10.1115/1.2801317CrossRef

Caliskan, H., Kilic, Z. M., & Altintas, Y. (2018). On-line energy-based milling chatter detection. Journal of Manufacturing Science and Engineering. https://doi.org/10.1115/1.4040617CrossRef

Chen, X., Zhang, B., & Gao, D. (2021). Bearing fault diagnosis base on multi-scale CNN and LSTM model. Journal of Intelligent Manufacturing, 32(4), 971–987. https://doi.org/10.1007/s10845-020-01600-2CrossRef

Chen, Y., Li, H., Hou, L., Wang, J., & Bu, X. (2018). An intelligent chatter detection method based on EEMD and feature selection with multi-channel vibration signals. Measurement, 127, 356–365. https://doi.org/10.1016/j.measurement.2018.06.006CrossRef

Chen, Y., Li, H., Jing, X., Hou, L., & Bu, X. (2019). Intelligent chatter detection using image features and support vector machine. The International Journal of Advanced Manufacturing Technology, 102(5), 1433–1442. https://doi.org/10.1007/s00170-018-3190-4CrossRef

Cheng, P., Wang, H., Stojanovic, V., He, S., Shi, K., Luan, X., et al. (2021). Asynchronous fault detection observer for 2-D markov jump systems. IEEE Transactions on Cybernetics. https://doi.org/10.1109/TCYB.2021.3112699CrossRef

Dun, Y., Zhu, L., Yan, B., & Wang, S. (2021). A chatter detection method in milling of thin-walled TC4 alloy workpiece based on auto-encoding and hybrid clustering. Mechanical Systems and Signal Processing, 158, 107755. https://doi.org/10.1016/j.ymssp.2021.107755CrossRef

Fu, Y., Zhang, Y., Zhou, H., Li, D., Liu, H., Qiao, H., & Wang, X. (2016). Timely online chatter detection in end milling process. Mechanical Systems and Signal Processing, 75, 668–688. https://doi.org/10.1016/j.ymssp.2016.01.003CrossRef

Gupta, P., & Singh, B. (2020). Local mean decomposition and artificial neural network approach to mitigate tool chatter and improve material removal rate in turning operation. Applied Soft Computing, 96, 106714. https://doi.org/10.1016/j.asoc.2020.106714CrossRef

He, J., Sun, Y., Yin, C., He, Y., & Wang, Y. (2022). Cross-domain adaptation network based on attention mechanism for tool wear prediction. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-022-02005-zCrossRef

He, Z., Shao, H., Zhong, X., & Zhao, X. (2020). Ensemble transfer CNNs driven by multi-channel signals for fault diagnosis of rotating machinery cross working conditions. Knowledge-Based Systems, 207, 106396. https://doi.org/10.1016/j.knosys.2020.106396CrossRef

Jo, H.-N., Park, B. E., Ji, Y., Kim, D.-K., Yang, J. E., & Lee, I.-B. (2020). Chatter detection and diagnosis in hot strip mill process with a frequency-based chatter index and modified independent component analysis. IEEE Transactions on Industrial Informatics, 16(12), 7812–7820. https://doi.org/10.1109/TII.2020.2978526CrossRef

Ko, J. H. (2015). Time domain prediction of milling stability according to cross edge radiuses and flank edge profiles. International Journal of Machine Tools and Manufacture, 89, 74–85. https://doi.org/10.1016/j.ijmachtools.2014.11.004CrossRef

Ko, J. H. (2022). Machining stability categorization and prediction using process model guided machine learning. Metals, 12(2), 298. https://doi.org/10.3390/met12020298CrossRef

Ko, J. H., & Altintas, Y. (2006). Dynamics and stability of plunge milling operations. Journal of Manufacturing Science and Engineering, 129(1), 32–40. https://doi.org/10.1115/1.2383070CrossRef

Ko, J. H., & Altintas, Y. (2007). Time domain model of plunge milling operation. International Journal of Machine Tools and Manufacture, 47(9), 1351–1361. https://doi.org/10.1016/j.ijmachtools.2006.08.007CrossRef

Ko, J. H., & Cho, D. W. (2005). 3D ball-end milling force model using instantaneous cutting force coefficients. Journal of Manufacturing Science and Engineering, 127(1), 1–12. https://doi.org/10.1115/1.1826077CrossRef

Kvinevskiy, I., Bedi, S., & Mann, S. (2020). Detecting machine chatter using audio data and machine learning. The International Journal of Advanced Manufacturing Technology, 108(11), 3707–3716. https://doi.org/10.1007/s00170-020-05571-9CrossRef

Lamraoui, M., Barakat, M., Thomas, M., & Badaoui, M. E. (2015). Chatter detection in milling machines by neural network classification and feature selection. Journal of Vibration and Control, 21(7), 1251–1266. https://doi.org/10.1177/1077546313493919CrossRef

Li, X., Zhang, W., & Ding, Q. (2019). Understanding and improving deep learning-based rolling bearing fault diagnosis with attention mechanism. Signal Processing, 161, 136–154. https://doi.org/10.1016/j.sigpro.2019.03.019CrossRef

Li, Y., Song, Y., Jia, L., Gao, S., Li, Q., & Qiu, M. (2021). Intelligent fault diagnosis by fusing domain adversarial training and maximum mean discrepancy via ensemble learning. IEEE Transactions on Industrial Informatics, 17(4), 2833–2841. https://doi.org/10.1109/TII.2020.3008010CrossRef

Liu, M.-K., Tran, M.-Q., Chung, C., & Qui, Y.-W. (2020). Hybrid model- and signal-based chatter detection in the milling process. Journal of Mechanical Science and Technology, 34(1), 1–10. https://doi.org/10.1007/s12206-019-1201-5CrossRef

Pérez-Canales, D., Álvarez-Ramírez, J., Jáuregui-Correa, J. C., Vela-Martínez, L., & Herrera-Ruiz, G. (2011). Identification of dynamic instabilities in machining process using the approximate entropy method. International Journal of Machine Tools and Manufacture, 51(6), 556–564. https://doi.org/10.1016/j.ijmachtools.2011.02.004CrossRef

Pérez-Canales, D., Vela-Martínez, L., Carlos Jáuregui-Correa, J., & Alvarez-Ramirez, J. (2012). Analysis of the entropy randomness index for machining chatter detection. International Journal of Machine Tools and Manufacture, 62, 39–45. https://doi.org/10.1016/j.ijmachtools.2012.06.007CrossRef

Postel, M., Bugdayci, B., & Wegener, K. (2020). Ensemble transfer learning for refining stability predictions in milling using experimental stability states. The International Journal of Advanced Manufacturing Technology, 107(9), 4123–4139. https://doi.org/10.1007/s00170-020-05322-wCrossRef

Prechelt, L. (1998). Early stopping - but when? In G. B. Orr & K.-R. Müller (Eds.), Neural networks: Tricks of the trade (pp. 55–69). Springer. https://doi.org/10.1007/3-540-49430-8_3CrossRef

Rafal, R., Pawel, L., Krzysztof, K., Bogdan, K., & Jerzy, W. (2015). Chatter identification methods on the basis of time series measured during titanium superalloy milling. International Journal of Mechanical Sciences, 99, 196–207. https://doi.org/10.1016/j.ijmecsci.2015.05.013CrossRef

Ren, Y., & Ding, Y. (2022). Online milling chatter identification using adaptive Hankel low-rank decomposition. Mechanical Systems and Signal Processing, 169, 108758. https://doi.org/10.1016/j.ymssp.2021.108758CrossRef

Sener, B., Gudelek, M. U., Ozbayoglu, A. M., & Unver, H. O. (2021). A novel chatter detection method for milling using deep convolution neural networks. Measurement, 182, 109689. https://doi.org/10.1016/j.measurement.2021.109689CrossRef

Shao, H., Jiang, H., Lin, Y., & Li, X. (2018). A novel method for intelligent fault diagnosis of rolling bearings using ensemble deep auto-encoders. Mechanical Systems and Signal Processing, 102, 278–297.CrossRef

Shi, F., Cao, H., Zhang, X., & Chen, X. (2020). A reinforced k-nearest neighbors method with application to chatter identification in high-speed milling. IEEE Transactions on Industrial Electronics, 67(12), 10844–10855. https://doi.org/10.1109/TIE.2019.2962465CrossRef

Shrivastava, Y., & Singh, B. (2021). Tool chatter prediction based on empirical mode decomposition and response surface methodology. Measurement, 173, 108585. https://doi.org/10.1016/j.measurement.2020.108585CrossRef

Tangjitsitcharoen, S., Saksri, T., & Ratanakuakangwan, S. (2015). Advance in chatter detection in ball end milling process by utilizing wavelet transform. Journal of Intelligent Manufacturing, 26(3), 485–499. https://doi.org/10.1007/s10845-013-0805-3CrossRef

Tran, M.-Q., Liu, M.-K., & Tran, Q.-V. (2020). Milling chatter detection using scalogram and deep convolutional neural network. The International Journal of Advanced Manufacturing Technology, 107(3), 1505–1516. https://doi.org/10.1007/s00170-019-04807-7CrossRef

Unver, H. O., & Sener, B. (2021). A novel transfer learning framework for chatter detection using convolutional neural networks. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-021-01839-3CrossRef

Vashisht, R. K., & Peng, Q. (2020). Online chatter detection for milling operations using LSTM neural networks assisted by motor current signals of ball screw drives. Journal of Manufacturing Science and Engineering. https://doi.org/10.1115/1.4048001CrossRef

Wan, S., Li, X., Yin, Y., & Hong, J. (2021). Milling chatter detection by multi-feature fusion and adaboost-SVM. Mechanical Systems and Signal Processing, 156, 107671. https://doi.org/10.1016/j.ymssp.2021.107671CrossRef

Wang, L., Pan, J., Shao, Y., Zeng, Q., & Ding, X. (2021a). Two new kurtosis-based similarity evaluation indicators for grinding chatter diagnosis under non-stationary working conditions. Measurement, 176, 109215. https://doi.org/10.1016/j.measurement.2021.109215CrossRef

Wang, Lu., & Wu, C. (2017). Business failure prediction based on two-stage selective ensemble with manifold learning algorithm and kernel-based fuzzy self-organizing map. Knowledge-Based Systems, 121, 99–110. https://doi.org/10.1016/j.knosys.2017.01.016CrossRef

Wang, Y., Zhang, M., Tang, X., Peng, F., & Yan, R. (2021b). A kMap optimized VMD-SVM model for milling chatter detection with an industrial robot. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-021-01736-9CrossRef

Xu, Z., Li, C., & Yang, Y. (2021). Fault diagnosis of rolling bearings using an improved multi-scale convolutional neural network with feature attention mechanism. ISA Transactions, 110, 379–393. https://doi.org/10.1016/j.isatra.2020.10.054CrossRef

Yang, Z., Zhang, J., Zhao, Z., Zhai, Z., & Chen, X. (2020). Interpreting network knowledge with attention mechanism for bearing fault diagnosis. Applied Soft Computing, 97, 106829. https://doi.org/10.1016/j.asoc.2020.106829CrossRef

Yin, C., Wang, Y., He, Y., Liu, L., Wang, Y., & Yue, G. (2021a). Early fault diagnosis of ball screws based on 1-D convolution neural network and orthogonal design. Proceedings of the Institution of Mechanical Engineers, Part o: Journal of Risk and Reliability. https://doi.org/10.1177/1748006X21992886CrossRef

Yin, C., Wang, Y., Lee, H. P., He, J., He, Y., & Sun, Y. (2021b). Robust wheel wear detection for solid carbide grinding under strong noise interference: A new approach based on improved ensemble noise-reconstructed empirical mode decomposition. Wear, 486–487, 204112. https://doi.org/10.1016/j.wear.2021.204112CrossRef

Zhang, P., Gao, D., Lu, Y., Kong, L., & Ma, Z. (2022). Online chatter detection in milling process based on fast iterative VMD and energy ratio difference. Measurement, 194, 111060. https://doi.org/10.1016/j.measurement.2022.111060CrossRef

Zhang, Y., Li, X., Gao, L., Chen, W., & Li, P. (2020a). Intelligent fault diagnosis of rotating machinery using a new ensemble deep auto-encoder method. Measurement, 151, 107232. https://doi.org/10.1016/j.measurement.2019.107232CrossRef

Zhang, Y., Li, X., Gao, L., Chen, W., & Li, P. (2020b). Ensemble deep contractive auto-encoders for intelligent fault diagnosis of machines under noisy environment. Knowledge-Based Systems, 196, 105764. https://doi.org/10.1016/j.knosys.2020.105764CrossRef

Titel: Attention-driven transfer learning framework for dynamic model guided time domain chatter detection
verfasst von: Chen Yin
Yulin Wang
Jeong Hoon Ko
Heow Pueh Lee
Yuxin Sun
Publikationsdatum: 24.05.2023
Verlag: Springer US
Erschienen in: Journal of Intelligent Manufacturing / Ausgabe 4/2024
Print ISSN: 0956-5515
Elektronische ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-023-02133-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2024

Developing an explainable hybrid deep learning model in digital transformation: an empirical study

Coupling of an analytical rolling model and reinforcement learning to design pass schedules: towards properties controlled hot rolling

Learning the manufacturing capabilities of machining and finishing processes using a deep neural network model

Indirect porosity detection and root-cause identification in WAAM

Power spectral density moment of having defective 3D printed plastic beams under moving load based on deep learning

Federated transfer learning for auxiliary classifier generative adversarial networks: framework and industrial application

Premium Partner

Marktübersichten