nach oben

Wood Science and Technology

Erschienen in:

01.01.2012 | Original

Bamboo nanofiber preparation by HCW and grinding treatment and its application for nanocomposite

verfasst von: Fuxiang Chang, Seung-Hwan Lee, Keisuke Toba, Asahiro Nagatani, Takashi Endo

Erschienen in: Wood Science and Technology | Ausgabe 1-3/2012

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A new approach to prepare cellulose nanofiber was attempted using the combined method of hot-compressed water (HCW) treatment and disk milling. The HCW treatment was effective in loosening the cell wall structure and enhancing fibrillation by disk milling. The fibrillated products showed fine fibrous morphology at the nanometer scale. Filtration time and specific surface area were measured as criteria of the degree of fibrillation, and both these values were increased in nanofibers obtained by disk milling after HCW treatment. The obtained nanofiber-reinforced polyurethane composite was prepared, and its tensile properties were drastically improved by the increased nanofiber content.

Vorheriger Artikel Duration-of-load and creep effects in strand-based wood composite: a creep-rupture model

Nächster Artikel Moisture diffusion coefficient of reaction woods: compression wood of Picea abies L. and tension wood of Fagus sylvatica L.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Abe K, Iwamoto S, Yano H (2007) Obtaining cellulose nanofibers with a uniform width of 15 nm from wood. Biomacromolecules 8:3276–3278PubMedCrossRef

Ando H, Sakaki T, Kokusho T, Shibata M, Uemura Y, Hatate Y (2000) Decomposition behavior of plant biomass in hot-compressed water. Ind Eng Chem Res 39:3688–3693CrossRef

Awano T, Takabe K, Fujita M, Daniel G (2000) Deposition of glucuronoxylans on the secondary cell wall of Japanese beech as observed by immuno-scanning electron microscopy. Protoplasma 212:72–79CrossRef

Azeredo HMC, Mattoso LHC, Wood D, Williams TG, Avena-Bustillos RJ, McHugh TH (2009) Nanocomposite edible films from mango puree reinforced with cellulose nanofibers. J Food Sci 74(5):31–35CrossRef

Bhatnagar A, Sain M (2005) Processing of cellulose nanofiber-reinforced composites. J Reinf Plast Compos 24(12):1259–1268CrossRef

Cao X, Chen Y, Chang PR, Muir AD, Falk G (2000) Starch-based nanocomposites reinforced with flax cellulose nanocrystals. Polym Lett 2(7):502–510

Chakraborty A, Sain M, Kortschot M (2005) Cellulose micriofibrils: a novel method of preparation using high shear refining and cryocrushing. Holzforschung 59:102–107CrossRef

Chen G, Liu H (2008) Electrospun cellulose nanofiber reinforced soybean protein isolate composite film. J Appl Polym Sci 110:641–646CrossRef

Cheng Q, Wang S, Rials TG, Lee SH (2007) Physical and mechanical properties of polyvinyl alcohol and polypropylene composite materials reinforced with fibril aggregates isolated from regenerated cellulose fibers. Cellulose 14(6):593–602CrossRef

Dufresne A, Cavaille JY, Vignon MR (1997) Mechanical behavior of sheets prepared from sugar beet cellulose microfibrils. J Appl Polym Sci 64(6):1185–1194CrossRef

Eichhorn SJ, Dufresne A, Aranguren M, Marcovich NE, Capadona JR, Rowan SJ, Weder C, Thielemans W, Roman M, Renneckar S, Gindl W, Veigel S, Keckes J, Yano H, Abe K, Nogi M, Nakagaito N, Mangalam A, Simonsen J, Benight AS, Bismarck A, Berglund LA, Peijs T (2010) Review: current international research into cellulose nanofibres and nanocomposites. J Mater Sci 45:1–33CrossRef

Gindl W, Keckes J (2005) All-cellulose nanocomposite. Polymer 14:10221–10225CrossRef

Hajji P, Cavaillé JY, Favier V, Gauthier C, Vigier G (2004) Tensile behavior of nanocomposites from latex and cellulose whiskers. Polym Composit 17(4):612–619CrossRef

Henriksson M, Berglund LA (2007) Structure and properties of cellulose nanocomposite films containing melamine formaldehyde. J Appl Polym Sci 106:2817–2824CrossRef

Iwamoto S, Nakagaito AN, Yano H (2005) Optically transparent composites reinforced with plant fiber-based nanofibers. Appl Phys A Mater Sci Process 81(6):1112

Iwamoto S, Abe K, Yano H (2008) The effect of hemicelluloses on wood pulp nanofibrillation and nanofiber network characteristics. Biomacromolecules 9:1022–1026PubMedCrossRef

Japanese Wood Research Society (2000) Experimental manual for wood science. Bun-eido Publishing Co., Ltd, Japan, p 94

Jonoobi M, Harun J, Mathew AP, Hussein MZP, Oksman K (2010) Preparation of cellulose nanofibers with hydrophobic surface characteristics. Cellulose 17:299–307CrossRef

Kaida R, Kaku T, Baba K, Oyadomari M, Watanabe T, Nishida K, Kanaya T, Shani Z, Shoseyov O, Hayashi T (2009) Loosening xyloglucan accelerates the enzymatic degradation of cellulose in wood. Molecul Plant 2(5):904–909CrossRef

Lee SH, Teramoto Y, Endo T (2009) Enhancement of enzymatic accessibility by fibrillation of woody biomass using batch-type kneader with twin-screw elements. Bioresour Technol 101:769–774PubMedCrossRef

Lee SH, Chang F, Inoue S, Endo T (2010) Increase in enzyme accessibility by generation of nanospace in cell wall supramolecular structure. Bioresources Technol 101:7218–7223CrossRef

Maiti P, Yamada K, Okamoto M, Ueda K, Okamoto K (2002) New polylactide/layered silicate nanocomposites: role of organoclays. Chem Mater 14:4654–4661CrossRef

Nakagaito AN, Yano H (2004) The effect of morphological changes from pulp fiber towards nano-scale fibrillated cellulose on the mechanical properties of high-strength plant fiber based composites. Appl Phys A Mater Sci Process 80:547–552

Nakagaito AN, Iwamoto S, Yano H (2005) Bacterial cellulose: the ultimate nano-scalar cellulose morphology for the production of high-strength composite. Appl Phys A Mater Sci Process 80:93–97CrossRef

Nishino T, Takano K, Nakamae K (2003) Elastic modulus of the crystalline regions of cellulose polymorphs. J Polym Sci Part B Polym Phys 33(11):1647–1651CrossRef

Nogi M, Iwamoto A, Nakagaito AN, Yano H (2009) Optically transparent nanofiber paper. Adv Mater 20:1–4

Oksman K, Sain M (2006) Cellulose nanocmposites; processing, characterization and properties. ACS symposium series vol. 938. Oxford University Press, OxfordCrossRef

Ougiya H, Hioki N, Watanabe K, Morinaga Y, Yoshinaga F, Samejima M (1998) Relationship between the physical properties and surface area of cellulose derived from adsorbates of varous molecular sizes. Biosci Biotechnol Biochem 62:1880–1884CrossRef

Ray SS, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28:1539–1641CrossRef

Saito T, Kimura S, Nishiyama Y, Isogai A (2007) Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose. Biomacromolecules 8:2485–2491PubMedCrossRef

Sakaki T, Shibata M, Miki T, Hirosue H, Hayashi N (1996) Reaction model of cellulose decomposition in near-critical water and fermentation of products. Bioresour Technol 58:197–202CrossRef

Samir MASA, Alloin F, Sanchez JY, Dufresne A (2004) Cross-linked nanocomposite polymer electrolytes reinforced with cellulose whiskers. Macromolecules 37:4839–4844CrossRef

Samir MASA, Alloin F, Dufresne A (2005) Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field. Biomacromolecules 6:612–626CrossRef

Schopfer P (2006) Biomechanics of plant growth. Am J Bot 93:1415–1425PubMedCrossRef

Stelte W, Sanadi AR (2009) Preparation and characterization of cellulose nanofibers from two commercial hardwood and softwood pulps. Ind Eng Chem Res 48:11211–11219CrossRef

Tang C, Liu H (2008) Cellulose nanofiber reinforced poly (vinyl alcohol) composite film with high visible light transmittance. Compos Part A Appl Sci Manuf 39(10):1638–1643CrossRef

Taniguchi T, Okamura K (1998) New films produced from microfibrillated natural fibres. Polym Int 47(3):291–294CrossRef

Wan JQ, Wang Y, Xiao Q (2010) Effects of hemicellulose removal on cellulose fiber structure and recycling characteristics of eucalyptus pulp. Bioresour Technol 101:4577–4583PubMedCrossRef

Wu Q, Henriksson M, Liu X, Berglund LA (2007) A high strength nanocomposite based on microcrystalline cellulose and polyurethane. Biomacromolecules 8(12):3688–3692CrossRef

Yano H, Sugiyama J, Nakagaito AN, Nogi M, Matsuura T, Hikita M, Handa K (2005) Optically transparent composites reinforced with networks of bacterial nanofibers. Adv Mater 17(2):153–155CrossRef

Titel: Bamboo nanofiber preparation by HCW and grinding treatment and its application for nanocomposite
verfasst von: Fuxiang Chang
Seung-Hwan Lee
Keisuke Toba
Asahiro Nagatani
Takashi Endo
Publikationsdatum: 01.01.2012
Verlag: Springer-Verlag
Erschienen in: Wood Science and Technology / Ausgabe 1-3/2012
Print ISSN: 0043-7719
Elektronische ISSN: 1432-5225
DOI: https://doi.org/10.1007/s00226-011-0416-0

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 1-3/2012

Effect of wood species on thermal flow behavior and physical properties of thermoplastic moldings

Origin of the acetylated structures present in white birch (Betula pendula Roth) milled wood lignin

Duration-of-load and creep effects in strand-based wood composite: a creep-rupture model

Probabilistic strength prediction of adhesively bonded timber joints

Compression of wood under saturated steam, superheated steam, and transient conditions at 150°C, 160°C, and 170°C

Editorial