nach oben

Tribology Letters

Erschienen in:

01.09.2021 | Original Paper

Bi₂S₃ and MoS₂ Soft Coatings: A Comparative Study of Their Frictional Behavior Under Different Humidity Levels, Normal Loads, and Sliding Speeds

verfasst von: B. Pilotti, G. Prieto, A. Juan, R. Faccio, E. Broitman, M. Dennehy, W. R. Tuckart

Erschienen in: Tribology Letters | Ausgabe 3/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Bi₂S₃ is a promising solid lubricant for demanding applications, such as oil extraction, heavy mining, and aerospace components. However, its tribological behavior has not been studied in depth. Burnished Bi₂S₃ soft coatings were evaluated utilizing reciprocating sliding tests under different levels of relative humidity level, normal load, and sliding speed and the results were benchmarked against MoS₂ coatings. In addition, ab initio calculations using density functional theory modeling were employed for studying the interaction between the sulfides and the steel substrates and the effect of water intercalation at an atomic level. It was found that Bi₂S₃ coatings present excellent environmental adaptability and substrate protection over a wide range of testing conditions, thanks to their characteristic crystal structure.

Graphic Abstract

Vorheriger Artikel Interfacial Interactions and Tribological Behavior of Metal-Oxide/2D-Material Contacts

Nächster Artikel The Effect of Cu2+ Ions and Glycine Complex on Chemical Mechanical Polishing (CMP) Performance of SiC Substrates

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Castiñeiras, T., Núñez, A., Gallo, E., Carcagno, G.: Dry dope-free OCTG connections: a novel environmentally friendly technology validated through diverse and severe field conditions. SPE/IADC Drill. Conf. Proc. 2, 879–890 (2009). https://doi.org/10.2118/119642-msCrossRef

Leech, A., Roberts, A.: Development of premium threaded connections for casing and tubing. SPE Drill. Complet. 22, 106–111 (2007)CrossRef

Miyoshi, K.: Solid lubricants and coatings for extreme environments: state-of-the-art survey. Nasa Tm-2007–214668. 1–23 (2007). https://ntrs.nasa.gov/api/citations/20070010580/downloads/20070010580.pdf

Gohardani, O., Elola, M.C., Elizetxea, C.: Potential and prospective implementation of carbon nanotubes on next generation aircraft and space vehicles: a review of current and expected applications in aerospace sciences. Prog. Aerosp. Sci. 70, 42–68 (2014). https://doi.org/10.1016/j.paerosci.2014.05.002CrossRef

Donnet, C., Erdemir, A.: Solid lubricant coatings: recent developments and future trends. Tribol. Lett. 17, 389–397 (2004). https://doi.org/10.1023/B:TRIL.0000044487.32514.1dCrossRef

Erdemir, A., Martin, J.M.: Superior wear resistance of diamond and DLC coatings. Curr. Opin. Solid State Mater. Sci. 22, 243–254 (2018). https://doi.org/10.1016/j.cossms.2018.11.003CrossRef

Zhai, W., Srikanth, N., Kong, L.B., Zhou, K.: Carbon nanomaterials in tribology. Carbon N. Y. 119, 150–171 (2017). https://doi.org/10.1016/j.carbon.2017.04.027CrossRef

Muratore, C., Voevodin, A.A.: Chameleon coatings: adaptive surfaces to reduce friction and wear in extreme environments. Annu. Rev. Mater. Res. 39, 297–324 (2009). https://doi.org/10.1146/annurev-matsci-082908-145259CrossRef

Kupčík, V., Veselá-Nováková, L.: Zur Kristallstruktur des Bismuthinits, Bi₂S₃. TMPM Tschermaks Mineral. und Petrogr. Mitteilungen. 14, 55–59 (1970). https://doi.org/10.1007/BF01081780CrossRef

10.

Łukaszewicz, K., Stępień-Damm, J., Pietraszko, A., Kajokas, A., Grigas, J.: Crystal structure, thermal expansion, dielectric permittivity and phase transitions of Bi₂S₃. Pol. J. Chem. 73, 541–546 (1999)

11.

Lundegaard, L.F., Makovicky, E., Boffa-Ballaran, T., Balic-Zunic, T.: Crystal structure and cation lone electron pair activity of Bi₂S₃ between 0 and 10 GPa. Phys. Chem. Miner. 32, 578–584 (2005). https://doi.org/10.1007/s00269-005-0033-2CrossRef

12.

Rohr, O.: Bismuth—the new ecologically green metal for modern lubricating engineering. Ind. Lubr. Tribol. 54, 153–164 (2002). https://doi.org/10.1108/00368790210431709CrossRef

13.

Gonzalez-Rodriguez, P., van den Nieuwenhuijzen, K.J.H., Lette, W., Schipper, D.J., ten Elshof, J.E.: Tribochemistry of bismuth and bismuth salts for solid lubrication. ACS Appl. Mater. Interfaces. 8, 7601–7606 (2016). https://doi.org/10.1021/acsami.6b02541CrossRef

14.

Krenev, V.A., Drobot, N.F., Fomichev, S.V.: Bismuth: reserves, applications, and the world market. Theor. Found. Chem. Eng. 49, 532–535 (2015). https://doi.org/10.1134/S0040579515040120CrossRef

15.

Begum, A., Hussain, A., Rahman, A.: Optical and electrical properties of doped and undoped Bi₂S₃-PVA films prepared by chemical drop method. Mater. Sci. Appl. 02, 163–168 (2011). https://doi.org/10.4236/msa.2011.23020CrossRef

16.

Mesquita, P.R.R., Almeida, J.S., Teixeira, L.S.G., Da Silva, A.F., Silva, L.A.: A fast sonochemical method to prepare 1D and 3D nanostructures of bismuth sulfide. J. Braz. Chem. Soc. 24, 280–284 (2013). https://doi.org/10.5935/0103-5053.20130036CrossRef

17.

Zhu, H., Hu, J., Zhang, Y., Fei, Y.: Extreme pressure properties and mechanism of bismuth naphthenate with sulfur containing additives. In: Proceedings of CIST2008 & ITS-IFToMM2008. pp. 878–879, Beijing, China (2008). https://doi.org/10.1007/978-3-642-03653-8_297

18.

Hart, R.T., Kerr, A., Eckert, N.: Bismuth sulfide (Bi₂S₃) as the active species in extreme pressure lubricants containing bismuth carboxylates and sulfur compounds. Tribol. Trans. 53, 22–28 (2010). https://doi.org/10.1080/10402000903154816CrossRef

19.

Hu, J.Q., Zhu, J., Gao, K.Y., Fei, Y.W.: Study on tribological properties of organic bismuth compounds as lubricationg additive. Adv. Mater. Res. 233–235, 1632–1635 (2011)CrossRef

20.

Xu, X.I.N., Hu, J., Yang, S., Xie, F., Guo, L.I.: Extreme pressure synergistic mechanism of bismuth napthenate and sulfurized isobutene additives. Surf. Rev. Lett. 24, 1–12 (2017). https://doi.org/10.1142/S0218625X17500718CrossRef

21.

Müller, C., Redondo, F.L., Dennehy, M., Ciolino, A.E., Tuckart, W.R.: Bismuth (III) sulfide as additive: towards better lubricity without toxicity. Ind. Lubr. Tribol. 70, 347–352 (2018). https://doi.org/10.1108/ILT-03-2017-0051CrossRef

22.

Müller, C., Avila, A.J., Denehy, M., Yañez, M.J., Ciolino, A.E., Tuckart, W.: Morphological and tribological analysis of synthetic and commercial sulfures. Microsc. Microanal. 26, 115–116 (2020). https://doi.org/10.1017/s1431927620000793CrossRef

23.

Vazirisereshk, M.R., Martini, A., Strubbe, D.A., Baykara, M.Z.: Solid lubrication with MoS₂: a review. Lubricants 7, 57 (2019). https://doi.org/10.3390/lubricants7070057CrossRef

24.

Singer, I.L., Bolster, R.N., Wegand, J., Fayeulle, S., Stupp, B.C.: Hertzian stress contribution to low friction behavior of thin MoS₂ coatings. Appl. Phys. Lett. 57, 995–997 (1990). https://doi.org/10.1063/1.104276CrossRef

25.

Donnet, C., Martin, J.M., Le Mogne, T., Belin, M.: The origin of super-low friction coefficient of MoS₂ coatings in various environments. Tribol. Ser. 27, 277–284 (1994). https://doi.org/10.1016/S0167-8922(08)70317-1CrossRef

26.

Kohli, A.K., Prakash, B.: Contact pressure dependency in frictional behavior of burnished molybdenum disulphide coatings. Tribol. Trans. 44, 147–151 (2001). https://doi.org/10.1080/10402000108982439CrossRef

27.

Liang, T., Sawyer, W.G., Perry, S.S., Sinnott, S.B., Phillpot, S.R.: First-principles determination of static potential energy surfaces for atomic friction in MoS₂ and MoO₃. Phys. Rev. Condens. B Matter Mater. Phys. 77, 1–6 (2008)

28.

Onodera, T., Morlta, Y., Suzuki, A., Koyama, M., Tsuboi, H., Hatakeyama, N., Endou, A., Takaba, H., Kubo, M., Dassenoy, F., Minfray, C., Joly-Pottuz, L., Martin, J.M., Miyamoto, A.: A computational chemistry study on friction of h-MoS₂. Part I. Mechanism of single sheet lubrication. J. Phys. Chem. B. 113, 16526–16536 (2009). https://doi.org/10.1021/jp9069866CrossRef

29.

Onodera, T., Morita, Y., Nagumo, R., Miura, R., Suzuki, A., Tsuboi, H., Hatakeyama, N., Endou, A., Takaba, H., Dassenoy, F., Minfray, C., Joly-Pottuz, L., Kubo, M., Martin, J.M., Miyamoto, A.: A computational chemistry study on friction of h-MoS2. Part II. Friction anisotropy. J. Phys. Chem. B. 114, 15832–15838 (2010). https://doi.org/10.1021/jp1064775CrossRef

30.

Levita, G., Cavaleiro, A., Molinari, E., Polcar, T., Righi, M.C.: Sliding properties of MoS₂ layers: load and interlayer orientation effects. J. Phys. Chem. C. 118, 13809–13816 (2014). https://doi.org/10.1021/jp4098099CrossRef

31.

Levita, G., Restuccia, P., Righi, M.C.: Graphene and MoS₂ interacting with water: a comparison by ab initio calculations. Carbon 107, 878–884 (2016). https://doi.org/10.1016/j.carbon.2016.06.072CrossRef

32.

Levita, G., Righi, M.C.: Effects of water intercalation and tribochemistry on MoS₂ lubricity: an ab initio molecular dynamics investigation. ChemPhysChem 18, 1475–1480 (2017). https://doi.org/10.1002/cphc.201601143CrossRef

33.

Arif, T., Yadav, S., Colas, G., Singh, C.V., Filleter, T.: Understanding the independent and interdependent role of water and oxidation on the tribology of ultrathin molybdenum disulfide (MoS₂). Adv. Mater. Interfaces. 6, 1–9 (2019). https://doi.org/10.1002/admi.201901246CrossRef

34.

Chow, P.K., Singh, E., Viana, B.C., Gao, J., Luo, J., Li, J., Lin, Z., Elías, A.L., Shi, Y., Wang, Z., Terrones, M., Koratkar, N.: Wetting of mono and few-layered WS₂ and MoS₂ films supported on Si/SiO₂ substrates. ACS Nano 9, 3023–3031 (2015). https://doi.org/10.1021/nn5072073CrossRef

35.

Singer, I.L.: A thermochemical model for analyzing low wear-rate materials. Surf. Coatings Technol. 49, 474–481 (1991). https://doi.org/10.1016/0257-8972(91)90103-4CrossRef

36.

Zhu, X., Lauwerens, W., Cosemans, P., Van Stappen, M., Celis, J.P., Stals, L.M., He, J.: Different tribological behavior of MoS₂ coatings under freeting and pin-on-disk conditions. Surf. Coatings Technol. 163–164, 422–428 (2003). https://doi.org/10.1016/S0257-8972(02)00638-2CrossRef

37.

International Organization for Standarization, ISO 25178-2:2012 Geometrical product specifications (GPS) — Surface texture: areal — Part 2: Terms, definitions and surface texture parameters (2017)

38.

Greenspan, L.: Humidity fixed points of binary saturated aqueous solutions. J. Res. Natl. Bur. Stand. 1934(81A), 89–96 (1977)CrossRef

39.

Hohenberg, P., Kohn, W.: Inhomogeneous electron gas. Phys. Rev. 136, 864 (1964)CrossRef

40.

Kohn, W., Sham, L.J.: Self-consistent equations including exchange and correlation effects. Phys. Rev. 140, A1133 (1965)CrossRef

41.

Kresse, G., Furthmüller, J.: Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B. 54, 11169 (1996). https://doi.org/10.1103/PhysRevB.54.11169CrossRef

42.

Kresse, G., Joubert, D.: From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B. 59, 1758 (1999). https://doi.org/10.1103/PhysRevB.59.1758CrossRef

43.

Blöchl, P.E.: Projector augmented-wave method. Phys. Rev. B. 50, 17953 (1994). https://doi.org/10.1103/PhysRevB.50.17953CrossRef

44.

Perdew, J.P., Burke, K., Ernzerhof, M.: Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996). https://doi.org/10.1103/PhysRevLett.77.3865CrossRef

45.

Grimme, S., Antony, J., Ehrlich, S., Krieg, H.: A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu. J. Chem. Phys. 132, 154104 (2010). https://doi.org/10.1063/1.3382344CrossRef

46.

Grimme, S., Ehrlich, S., Goerigk, L.: Effect of the damping function in dispersion corrected density functional theory. J. Comput. Chem. 32, 1456–1465 (2011). https://doi.org/10.1002/jcc.21759CrossRef

47.

Panigrahi, P.K., Pathak, A.: The growth of bismuth sulfide nanorods from spherical-shaped amorphous precursor particles under hydrothermal condition. J. Nanopart. 2013, 1–11 (2013). https://doi.org/10.1155/2013/367812CrossRef

48.

Scharf, T.W., Kotula, P.G., Prasad, S.V.: Friction and wear mechanisms in MoS₂Sb₂O₂Au nanocomposite coatings. Acta Mater. 58, 4100–4109 (2010). https://doi.org/10.1016/j.actamat.2010.03.040CrossRef

49.

Fusaro, R.L.: Lubrication and failure mechanisms of molybdenum disulfide films. 2: effect of substrate roughness. NASA TP-1379 (1978). https://ntrs.nasa.gov/api/citations/19790004988/downloads/19790004988.pdf

50.

Khare, H.S., Burris, D.L.: The effects of environmental water and oxygen on the temperature-dependent friction of sputtered molybdenum disulfide. Tribol. Lett. 52, 485–493 (2013). https://doi.org/10.1007/s11249-013-0233-8CrossRef

51.

Burris, H.S.K.D.L.: Surface and subsurface contributions of oxidation and moisture to room temperature friction of molybdenum disulfide. Tribol. Lett. 53, 329–336 (2014). https://doi.org/10.1007/s11249-013-0273-0CrossRef

52.

Valeri, S., Marchetto, D., Rota, A., Gualtieri, E., Ballestrazzi, A., Serpini, E.: The role of humidity and oxygen on MoS₂ thin films deposited by RF PVD magnetron sputtering. Surf. Coat. Technol. 319, 345–352 (2017). https://doi.org/10.1016/j.surfcoat.2017.04.006CrossRef

53.

Fusaro, R.L.: Effect of substrate surface finish on the lubrication and failure mechanisms of molybdenum disulfide films. ASLE Trans. 25, 141–156 (1982). https://doi.org/10.1080/05698198208983076CrossRef

54.

Fayeulle, S., Ehni, P.D., Singer, I.L.: Analysis of transfer films formed on steel and Co-WC during sliding against MoS₂-coated steel in argon. Surf. Coat. Technol. 41, 93–101 (1990). https://doi.org/10.1016/0257-8972(90)90133-WCrossRef

55.

Singer, I.L.: Solid lubrication processes. In: Singer, I.L., Pollock, H.M. (eds.) Fundamentals of friction: macroscopic and microscopic processes. Springer, Dordrecht (1992)CrossRef

56.

Wahl, K.J., Singer, I.L.: Quantification of a lubricant transfer process that enhances the sliding life of a MoS₂ coating. Tribol. Lett. 1, 59–66 (1995). https://doi.org/10.1007/BF00157976CrossRef

57.

Singer, I.L., Dvorak, S.D., Wahl, K.J., Scharf, T.W.: Role of third bodies in friction and wear of protective coatings. J. Vac. Sci. Technol. Vacuum Surf. Film. 21, 232–240 (2003). https://doi.org/10.1116/1.1599869CrossRef

58.

Li, Y., Xie, M., Sun, Q., Xu, X., Fan, X., Zhang, G., Li, H., Zhu, M.: The effect of atmosphere on the tribological behavior of magnetron sputtered MoS₂ coatings. Surf. Coat. Technol. 378, 125081 (2019). https://doi.org/10.1016/j.surfcoat.2019.125081CrossRef

59.

Ding, X.Z., Zeng, X.T., He, X.Y., Chen, Z.: Tribological properties of Cr- and Ti-doped MoS₂ composite coatings under different humidity atmosphere. Surf. Coat. Technol. 205, 224–231 (2010). https://doi.org/10.1016/j.surfcoat.2010.06.041CrossRef

60.

Zhao, X., Zhang, G., Wang, L., Xue, Q.: The tribological mechanism of MoS₂ film under different humidity. Tribol. Lett. 65, 1–8 (2017). https://doi.org/10.1007/s11249-017-0847-3CrossRef

61.

Lince, J.R., Loewenthal, S.H., Clark, C.S.: Tribological and chemical effects of long term humid air exposure on sputter-deposited nanocomposite MoS₂ coatings. Wear. 432–433, 202935 (2019). https://doi.org/10.1016/j.wear.2019.202935CrossRef

62.

Scharf, T.W., Prasad, S.V.: Solid lubricants: a review. J. Mater. Sci. 48, 511–531 (2013). https://doi.org/10.1007/s10853-012-7038-2CrossRef

63.

Colas, G., Saulot, A., Regis, E., Berthier, Y.: Investigation of crystalline and amorphous MoS₂ based coatings: towards developing new coatings for space applications. Wear 330–331, 448–460 (2015). https://doi.org/10.1016/j.wear.2015.01.011CrossRef

64.

Nishiyama, Z.: Martensitic transformation. Academic Press Inc., New York (2012)

65.

Böker, T., Severin, R., Müller, A., Janowitz, C., Manzke, R., Voß, D., Krüger, P., Mazur, A., Pollmann, J.: Band structure of MoS₂, MoSe₂, and α-MoTe₂: angle-resolved photoelectron spectroscopy and ab initio calculations. Phys. Rev. B. (2001). https://doi.org/10.1103/PhysRevB.64.235305CrossRef

66.

Li, W., Carrete, J., Mingo, N.: Thermal conductivity and phonon linewidths of monolayer MoS₂ from first principles. Appl. Phys. Lett. (2013). https://doi.org/10.1063/1.4850995CrossRef

67.

Cutini, M., Civalleri, B., Ugliengo, P.: Cost-effective quantum mechanical approach for predicting thermodynamic and mechanical stability of pure-silica zeolites. ACS Omega 4, 1838–1846 (2019). https://doi.org/10.1021/acsomega.8b03135CrossRef

68.

Cutini, M., Maschio, L., Ugliengo, P.: Exfoliation energy of layered materials by DFT-D: beware of dispersion! J. Chem. Theory Comput. 16, 5244–5252 (2020). https://doi.org/10.1021/acs.jctc.0c00149CrossRef

69.

Cutini, M., Corno, M., Costa, D., Ugliengo, P.: How does collagen adsorb on hydroxyapatite? Insights from ab initio simulations on a polyproline type II model. J. Phys. Chem. C. 123, 7540–7550 (2019). https://doi.org/10.1021/acs.jpcc.7b10013CrossRef

Titel: Bi2S3 and MoS2 Soft Coatings: A Comparative Study of Their Frictional Behavior Under Different Humidity Levels, Normal Loads, and Sliding Speeds
verfasst von: B. Pilotti
G. Prieto
A. Juan
R. Faccio
E. Broitman
M. Dennehy
W. R. Tuckart
Publikationsdatum: 01.09.2021
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 3/2021
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-021-01486-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphic Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2021

A Study on Microstructure, Friction and Rheology of Four Lithium Greases Formulated with Four Different Base Oils

Influence of Interfacial Oxidation on Friction in Structural Superlubricity

Structurally Driven Environmental Degradation of Friction in MoS2 Films

Transitions of Wear Characteristics for Rubber/Steel Seal Pairs During the Abrasive Wear Process

Probing the Rheological Properties of Liquids Under Conditions of Elastohydrodynamic Lubrication Using Simulations and Machine Learning

Electric Field Effect on Friction Coefficient of Diamond-Like Carbon Film Heated by Laser Irradiation

Premium Partner

Marktübersichten