nach oben

International Journal of Steel Structures

Erschienen in:

08.03.2024

Bond Behavior of Concrete-Filled Steel Tube with Molybdenum Tailing

verfasst von: Shu-Chao Lin, Fangbiao Liu, Qi Bai

Erschienen in: International Journal of Steel Structures | Ausgabe 2/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

To investigate the bond behavior of the concrete filled steel tubular (CFST) using the molybdenum tailing as the fine aggregate, 24 test specimens of the CFST are designed in consideration of molybdenum tailing replacement ratio, concrete strength, ratio of the filling height to the outer diameter and ratio of the outer diameter to the wall thickness. A series of push-out tests are conducted to analyze the working mechanism, failure mode, and bond stress-slip relation of the test specimens. The results show that the usage of the molybdenum tailing as the fine aggregate has no obvious effect on the working mechanism and failure mode of the CFST regardless of the test parameters, even though a slight difference is observed in the failure processes. The increase in the molybdenum tailing replacement ratio remarkably decreases the ultimate bond strength, but increase the ultimate failure slip of the test specimens whilst the ultimate failure slip shows no distinct change under the same ratio of the filling height to the outer diameter and ratio of the outer diameter to the wall thickness. The CFST test specimens with the molybdenum tailing shows slightly worse bond behavior than those without the molybdenum tailing. The proposed formula for the ultimate bond strength of the CFST with the molybdenum tailing fits well with the test results. Since, the limitations regarding the ultimate bond strengths of the CFST in the existing relevant specifications show the enough safety reserve, the proposed formula can be directly used for the design of the CFST with the molybdenum tailing.

Vorheriger Artikel Compressive Behaviour of Diagonally Stiffened Concrete Filled Steel Tubular Stub Columns with Reinforcement Stiffeners

Nächster Artikel Effect of Strut Stiffness on Seismic Performance of Fully Integral Steel Bridge with a Strut-Braced Pier

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Abendeh, R. M., Salman, D., & Louzi, R. A. (2022). Experimental and numerical investigations of interfacial bond in self-compacting concrete-filled steel tubes made with waste steel slag aggregates. Developments in the Built Environment, 11, 100080.CrossRef

Alam, M. I., Fawzia, S., & Liu, X. M. (2015). Effect of bond length on the behaviour of CFRP strengthened concrete-filled steel tubes under transverse impact. Composite Structures, 132, 898–914.CrossRef

Ali, A. M., Dieng, L., & Masmoudi, R. (2020). Experimental, analytical and numerical assessment of the bond-slip behaviour in concrete-filled-FRP tubes. Engineering Structures, 225, 111254.CrossRef

Bai, G. L., Ma, J. F., Liu, B., & Chen, X. N. (2020). Study on the interfacial bond slip constitutive relation of I-section steel and fully recycled aggregate concrete. Construction and Building Materials, 238, 117688.CrossRef

Cai, S. H. (2003). Modern steel tube confined concrete structures. China Communication Press. (in Chinese).

Chen, L. H., Dai, J. X., Jin, Q. L., Chen, L. F., & Liu, X. L. (2015). Refining bond-slip constitutive relationship between checkered steel tube and concrete. Construction and Building Materials, 79, 153–164.CrossRef

Chen, Y., Feng, R., Shao, Y. B., & Zhang, X. T. (2017). Bond-slip behaviour of concrete-filled stainless steel circular hollow section tubes. Journal of Constructional Steel Research, 130, 248–263.CrossRef

Feng, J. Y., Yang, Y. T., Ruan, K. J., Wu, D. M., Xu, Y. G., Jacobs, D. F., & Zeng, S. C. (2023). Combined application of sewage sludge, bagasse, and molybdenum tailings ameliorates rare earth mining wasteland soil. Journal of Soils and Sediments, 1, 1–14.

Gao, S., Cui, X., Kang, S., et al. (2020). Sustainable applications for utilizing molybdenum tailings in concrete. Journal of Cleaner Production, 266, 122020.CrossRef

Gao, S., Cui, X. W., & Zhang, S. M. (2019). Utilization of molybdenum tailings in concrete manufacturing: A review. Applied Sciences, 10(138), 1–9.

Gao, S., Qu, J., Zhang, S., et al. (2022). A comparative study on mechanical and environmental performance of concrete-filled steel tubes using molybdenum tailing aggregate. Journal of Constructional Steel Research, 189, 107100.CrossRef

Gao, S., Wei, Li., Yuan, K. K., et al. (2023). Properties and application of thixotropic cement paste backfill with molybdenum tailings. Journal of Cleaner Production, 391, 136169.CrossRef

Gao, S., Zhao, G., Guo, L., et al. (2021). Mechanical properties of circular thin-tubed molybdenum tailing concrete stubs. Construction and Building Materials, 268, 121215.CrossRef

GB/T 14684–2022. (2010) Sand for construction. State administration for market regulation (SAMR) and Standardization Administration Committee (SAC), Beijing, China. (in Chinese)

Gencel, O., Balci, B., Bayraktar, O. Y., Nodehi, M., Sarı, A., Kaplan, G., Hekimoğlu, G., Gholampour, A., Benli, A., & Ozbakkaloglu, T. (2022). The effect of limestone and bottom ash sand with recycled fine aggregate in foam concrete. Journal of Building Engineering, 54, 104689.CrossRef

González-Álvarez, I., Stoppa, F., Yang, X. Y., & Porwal, A. (2021). Introduction to the special Issue, insights on carbonatites and their mineral exploration approach: A challenge towards resourcing critical metals. Ore Geology Reviews, 133, 104073.CrossRef

Gourley, B.C., Tort C., Denavit, M.D., Schiller, P.H., Hajjar, J.F. (2008) A synopsis of studies of the monotonic and cyclic behavior of concrete-filled steel tube members, connections, and frames. Report No. NSEL-008, University of Illinois at Urbana-Champaign, Urbana, Illinois, United States.

Guan, M. S., Lai, Z. C., Xiao, Q., Du, H. B., & Zhang, K. (2019). Bond behavior of concrete-filled steel tube columns using manufactured sand (MS-CFT). Engineering Structures, 187, 199–208.CrossRef

Hasan, H. G., & Ekmekyapar, T. (2021). Bond-slip behaviour of concrete filled double skin steel tubular (CFDST) columns. Marine Structures, 79, 103061.CrossRef

He, Z. J., Chen, Y., Ma, Y. N., Zhang, X. J., Jin, Y. X., & Song, J. (2021). The study on bond-slip constitutive model of steel-fiber high-strength recycled concrete. Structures, 34, 2134–2150.CrossRef

Hui, C., Li, Y. G., Li, K., Liu, C., Hai, R., & Li, C. Q. (2022). Experimental investigation and analysis on the axial compressive performance of recycled concrete-filled corroded steel tubular columns. Archives of Civil and Mechanical Engineering, 22, 97.CrossRef

Jung, M. Y., Choi, Y. W., & Jeong, J. G. (2011). Recycling of tailings from Korea molybdenum corporation as admixture for high-fluidity concrete. Environmental Geochemistry and Health, 33, 113–119.CrossRef

Kazmi, D., Serati, M., Williams, D. J., Qasim, S., & Cheng, Y. P. (2021). The potential use of crushed waste glass as a sustainable alternative to natural and manufactured sand in geotechnical applications. Journal of Cleaner Production, 284, 124762.CrossRef

Ke, X. J., Tang, Z. K., Shen, J. Z., & Tao, Y. Y. (2022). Investigation on bond behavior between self-compacting rubberized concrete and rectangular steel tubes. KSCE Journal of Civil Engineering, 26(8), 3504–3519.CrossRef

Koloo, F. A., Badakhshan, A., Fallahnejad, H., Jamkhaneh, M. E., & Ahmadi, M. (2018). Investigation of proposed concrete filled steel tube connections under reversed cyclic loading. International Journal of Steel Structures, 18(1), 163–177.CrossRef

Leibovich, O., & Yankelevsky, D. Z. (2022). Bond behavior in pull-out of a ribbed rebar from concrete with recycled concrete aggregates. Case Studies in Construction Materials, 17, e01607.CrossRef

Li, H., Liu, Y. J., & Zhang, N. (2020a). Non-linear distributions of bond-slip behavior in concrete-filled steel tubes by the acoustic emission technique. Structures, 28, 2311–2320.CrossRef

Li, W., Chen, B., Han, L. H., & Lam, D. (2020b). Experimental study on the performance of steel-concrete interfaces in circular concrete-filled double skin steel tube. Thin-Walled Structures, 149, 106660.CrossRef

Li, W., Chen, B., Han, L. H., & Packer, J. A. (2022). Pushout tests for concrete-filled double skin steel tubes after exposure to fire. Thin-Walled Structures, 176, 109274.CrossRef

Liu, Z. Z., Lu, Y. Y., Li, S., & Xiao, L. W. (2021). Enhanced bond-slip behavior between recycled aggregate concrete and steel tubes under repeated loading. Structures, 33, 1263–1282.CrossRef

Lu, Y. Y., Liu, Z. Z., Li, S., & Li, N. (2018a). Bond behavior of steel fibers reinforced self-stressing and self-compacting concrete filled steel tube columns. Construction and Building Materials, 158, 894–909.CrossRef

Lu, Y. Y., Liu, Z. Z., Li, S., & Tang, W. S. (2018). Bond behavior of steel-fiber-reinforced self-stressing and self-compacting concrete-filled steel tube columns for a period of 2.5 years. Construction and Building Materials, 167, 33–43.CrossRef

Lv, J., Zhou, T. H., Du, Q., Li, K. L., & Jin, L. W. (2020). Research on the bond behavior of preplaced aggregate concrete-filled steel tube columns. Materials, 13(2), 300.CrossRef

Lv, X. Y., Yu, Z. W., & Shan, Z. (2021). Bond stress-slip model for rebar-concrete interface under monotonic and cyclic loading. Structures, 34, 498–506.CrossRef

Lyu, W. Q., & Han, L. H. (2019). Investigation on bond strength between recycled aggregate concrete (RAC) and steel tube in RAC-filled steel tubes. Journal of Constructional Steel Research, 155, 438–459.CrossRef

Mohammadnejad, M., Naghipour, M., Nematzadeh, M., & Elyasi, M. (2020). Experimental and analytical investigation of the effect of external pressure on compressive behavior of concrete-filled steel tube stub columns. Applied Ocean Research, 100, 102152.CrossRef

Morishita, Y., Tomii, M., & Yoshimura, K. (1979). Experimental studies on bond strength in concrete filled circular steel tubular columns subjected to axial loads. Transactions of the Japan Concrete Institute, 1(1), 351–358.

Nematzadeh, M., Karimi, A., & Gholampour, A. (2020). Pre- and post-heating behavior of concrete-filled steel tube stub columns containing steel fiber and tire rubber. Structures, 27, 2346–2364.CrossRef

Qu, X. S., Chen, Z. H., Nethercot, D. A., Gardner, L., & Theofanous, M. (2013). Load-reversed push-out tests on rectangular CFST columns. Journal of Constructional Steel Research, 81, 35–43.CrossRef

Quan, X. Y., Wang, S. L., Liu, K. N., Xu, J., Zhao, N., & Liu, B. (2022). Influence of molybdenum tailings by-products as fine aggregates on mechanical properties and microstructure of concrete. Journal of Building Engineering, 54, 104677.CrossRef

Raman, J. V. M., & Ramasamy, V. (2021). Augmentation of dissimilar techniques for enhancing the concrete properties with recycled coarse aggregate and manufactured sand. Journal of Materials Research and Technology, 14, 1180–1190.CrossRef

Rehmat, S., Sadeghnejad, A., Mantawy, I. M., & Azizinamini, A. (2021). Experimental study on concrete filled steel tubes to footing connection using ultra-high performance concrete. Engineering Structures, 242, 112540.CrossRef

Shakir-Khalil, H. (1993). Pushout strength of concrete-filled steel hollow section tubes. Structural Engineer, 71(13), 230–233.

Sharba, A. A. K., Hason, M. M., Hanoon, A. N., Qader, D. N., Amran, M., Abdulhameed, A. A., & Zand, A. W. A. (2022). Push-out test of waste sawdust-based steel-concrete–Steel composite sections: Experimental and environmental study. Case Studies in Construction Materials, 17, e01570.CrossRef

Siddique, S., & Jang, J. G. (2020). Assessment of molybdenum mine tailings as filler in cement mortar. Journal of Building Engineering, 31, 101322.CrossRef

Skierszkan, E. K., Stockwell, J. S., Dockrey, J. W., Weis, D., Beckie, R. D., & Mayer, K. U. (2017). Molybdenum (Mo) stable isotopic variations as indicators of Mo attenuation in mine waste-rock drainage. Applied Geochemistry, 87, 71–83.CrossRef

Tao, Z., Song, T. Y., Uy, B., & Han, L. H. (2016). Bond behavior in concrete-filled steel tubes. Journal of Constructional Steel Research, 120, 81–93.CrossRef

Xu, W. X., & Wei, Y. M. (2004). Multiple objective-integrated methodology of global optimum decision-making on mineral resources exploitation. Computers & Industrial Engineering, 46, 363–372.CrossRef

Yan, J. B., Xie, W. J., Zhang, L. X., & Lin, X. C. (2019). Bond behaviour of concrete-filled steel tubes at the Arctic low temperatures. Construction and Building Materials, 210, 118–131.CrossRef

Yu, F., Chen, T. Y., Niu, K., Wang, S. L., Kong, Z. Y., & Fang, Y. (2020). Study on bond-slip behaviors of self-stressing steel slag concrete-filled steel tube. KSCE Journal of Civil Engineering, 24(11), 3309–3319.CrossRef

Zhao, H. Y., Han, L. H., Hou, C., & Lyu, W. Q. (2023). Performance of recycled aggregate concrete-filled high-strength steel tubes under axial compression, tension and torsion. Thin-Walled Structures, 184, 110478.CrossRef

Titel: Bond Behavior of Concrete-Filled Steel Tube with Molybdenum Tailing
verfasst von: Shu-Chao Lin
Fangbiao Liu
Qi Bai
Publikationsdatum: 08.03.2024
Verlag: Springer Netherlands
Erschienen in: International Journal of Steel Structures / Ausgabe 2/2024
Print ISSN: 1598-2351
Elektronische ISSN: 2093-6311
DOI: https://doi.org/10.1007/s13296-024-00820-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2024

Effect of External Ring Stiffener on the Chord Members of Cold-Formed Steel T-Joints Under Combined Axial Compression and Bending

A Review of Research on Supported Transmission Line Tower Failure Studies: Analysis, Tower Testing and Retrofitting

Compressive Behaviour of Diagonally Stiffened Concrete Filled Steel Tubular Stub Columns with Reinforcement Stiffeners

Evaluation of Thickness Effect on Fatigue Life Variation of Longitudinal Welded Gusset Joint

Study on Detailing of Structural Steel Section on Lateral Behavior of SRC-RC Transfer Columns

Seismic Resilience Assessment of the Hybrid Bridge Pier Based on Fragility Analysis

Premium Partner

Marktübersichten