nach oben

Erschienen in:

2018 | OriginalPaper | Buchkapitel

3. Carbon Composites and Related Metal Matrix

verfasst von : Tapan Gupta

Erschienen in: Carbon

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The history of carbon composites dates back to the late 1800s. Thomas Edison used carbon composite filament in light bulbs. A carbon composite is composed of two or more materials to create a superior and unique material. Edison’s carbon composite filaments were made out of cellulose-based materials, such as cotton or bamboo, unlike the petroleum-based precursors used today. It was not until late 1950s that high tensile strength carbon fibers were discovered [1–3]. However, the first truly modulus commercial grade carbon fibers were invented in 1964. The benefits of these high-strength carbon-based composites are that they weighed a fraction of the weight of steel, yet contained much greater tensile strength than steel [4].

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Historical Production and Use of Carbon Materials: The Activated Carbon

Nächstes Kapitel Polymer Families and Their Extended Activities

High performance carbon fibers, National Historic Chemical Landmarks, Am. Chem. Soc., (2014)

A.K. Kaw, Mechanics of Composite Materials, 2nd edn. (CRC Press, Boka Raton, 2005)MATH

J.M. Corum, R.L. Battiste, K.C. Liu, M.B. Ruggles, Basic properties of reference crossply carbon fiber composite, Oak Ridge Nat. Lab. ORNL/TM-2000/29, DE-ACo5-96OR-22464

N. Baral, H. Guezenoc, P. Davies, C. Baley, High modulus carbon fibre composites: correlation between transverse tensile and module I interlaminar fracture properties. Mater. Lett. 62(6–7), 1096 (2008)CrossRef

Z.Y. Liu, B.L. Xiao, W.G. Wang, Z.Y. Ma, Tensile strength and electrical conductivity of carbon nanotube reinforced aluminum matrix composites fabricated by powder metallurgy combined with friction stir processing. J. Mater. Sci. Technol. 30(7), 649 (2014)CrossRef

H. Hatta, T. Aoi, I. Kawaha, Y. Kogo, I. Shiota, Tensile strength of carbon-carbon composites: 1-effect of C-C density. J. Compos. Mater. 38(19), 1667 (2004)CrossRef

H.M. Stoller, E.R. Frye, 73rd Syp. On Am Chem. Soc., Adv. Mater. Composite and Carbon, Annual Meeting, Am. Ceram Soc. (1973), p. 163

L.M. Manocha, High performance carbon carbon composite. Sadhana 28, 349 (2003)CrossRef

The Int. Handbook Committee, Vol. 1, of Engineered Materials Handbook. (ASM Int. Pub, Ohio, 1971) and also P. Morgan, Carbon Fibers and Their Composites (Taylor and Francis, FL, 2005)

10.

H.M. Stoller, E.R. Eyre, Symposium of the 73rd Annual Meeting of the American Ceramic Society, Advanced Materials Composite and Carbon, Am. Ceram. Soc., (1973), p. 163

11.

D.F. Pedraza, P.G. Klemens, Effective conductivity of polycrystalline graphite. Carbon 31(6), 951 (1993)CrossRef

12.

R. Jain, L. Lee, Fiber Reinforced Polymer (FRP) Composites for Infrastructure Applications. Focussing on Inovation, Technology Implementation and Sustainability (Springer, New York, 2012)

13.

M.J. Hinton, P.D. Soden, A.S. Kaddour, The world wide failure exercise, in Failure Criteria in Fiber-Reinforced-Polymer Composite, (Elsevier, Amsterdam, 2004)

14.

J.D. Buckley, D.D. Edie, Carbon-Carbon Materials and Composites (Noyes, Park Ridge, 1993)

15.

M.K. Seo, S.H. Park, S.H. Kang, S.J. Park, Carbon fibers (III), recent technical and patent trends. Carbon Lett. 10(1), 43 (2009)CrossRef

16.

A.K. Gupta, D.K. Paliwal, P. Bajaj, Melting behavior of acrylonitrile. J. Appl. Polym. Sci. 70, 2703 (1998)CrossRef

17.

P. Bajaj, T. Sreekumar, K. Sen, Effect of reaction medium on radical polymerization of acrylonitrile with venyl acids. J. Appl. Polym. Sci. 79, 1640 (2001)CrossRef

18.

A. Serkov, M. Radishevskii, Status and prospects for production of carbon fibers based on Polyacrylonitrile. Fiber Chem. 40, 24 (2008)CrossRef

19.

D. Papkov et al., Simultaneously strong and tough ultra fine continuous nanofibers. ACS Nano 7(4), 3324 (2013)CrossRef

20.

E. Fitzer, PAN based carbon fibers –present state and trend of the technology from the view point of possibilities and limits to influence and to control the fiber properties by the process parameters. Carbon 27(5), 621 (1989)CrossRef

21.

E. Fitzer, W. frobs, M. Heine, Optimization of stabilization and carbonization treatment of PAN fibers and structural characterization of the resulting carbon fibers. Carbon 24(4), 387 (1986)CrossRef

22.

G.S. Bhat et al., New aspects in stabilization of acrylic fibers for carbon fibers. Carbon 28(2–3), 377 (1990)CrossRef

23.

S. Lee, J. Kim, B.C. Ku, J. Kim, Y. Chung, Effect of process conditionon tensile properties of carbon fiber. Carbon Lett. 12(1), 26 (2011)CrossRef

24.

S. Lee, J. Kim, B.C. Ku, J. Kim, Y. Chung, Structural evolution of polyacrylonitrile fibers in stabilization and carbonization. Adv. Chem. Eng. Sci. 2, 275 (2012)CrossRef

25.

H.O. Pierson, Hand Book of Carbon, Graphite, Diamond and Fullerenes (Noyace, NJ, 1984)

26.

R.J. Diefendrof, Continuous Carbon Fiber Reinforced Carbon Matrix Composites in Composites, Ed. ASM Int. Handbook Committee, Vol.1 of Engineered Materials Handbook (ASM International, OH, 1987), p. 911

27.

M. Balasubramanium, Composite Materials and Processing (CRC Press, Boka Raton, 2013)CrossRef

28.

K.H. Bang, G.-Y. Chung, H.H. Koo, Preparation of C/C composites by chemical vapor infiltration (CVI) of propane pyrolysis. Korean J. Chem. Eng. 28(1), 272 (2011)CrossRef

29.

V. Liedike, K.J. Hunttinger, Pitches as matrix precursor of carbon fiber reinforced carbon: II Stabilization of mesophase pitch matrix by oxygen treatment. Carbon 35(9), 106 (1996)

30.

M. Hoffstetter, E. Wintermantel, Meso fiber –a novel approach to reinforce micro parts. Biomaterials 41(12), 1011 (2010)

31.

X. Haung, Fabrication properties of carbon fibers. Materials 2, 2369 (2009)CrossRef

32.

T. Roberts, The Carbon Fiber Industries: Global Strategic Market Evaluations, 2006–2010, Mater. Technol. Pub. Watford, UK., pp. 93–177, (2006) and E. Fitzer, Pan-Based Carbon Fibers –Present State and Trend of the Technology from the View Point of Possibilities and Limits to Influence and to Control the Fiber Properties by the Process Parameters, Carbon 27(5), 621 (1989)

33.

G.B. Kauffman, Rayon, first synthetic fiber product. J. Chem. Educ. 70(11), 887 (1993)CrossRef

34.

J.D.E. White, A.H. Simpson, A.S. Shteinberg, A.S. Mukasyan, Cobustion joining of refractory materials: carbon-carbon composite. J. Mater. Res. 23(1), 160 (2007)CrossRef

35.

F.K. Fo, Preform fiber architecture for ceramic matrix composite. Ceram. Bull. 68(2), 401 (1989)

36.

R. Warren, Ceramic Matrix Composites (Blackie and Son, London, 1992)

37.

D.D.L. Chung, Carbon-Carbon Composites (Butterworth Heinemann, Newton, 1994), p. 131

38.

J.F. Silvain, A. Veillere, Y. Lu, Copper-carbon and aluminum-carbon fabricated by powder metallurgy processes, J. Physics, Eurotherm Seminar, 102, Conf. Sr. No. 525 (2014)

39.

K. Kuniya, H. Arakawa, T. Kanai, T. Yasuda, Development of copper-carbon fiber composite for electrodes of power semicinductor devices. IEEE Trans. Comp. Hybrid. Manuf. Technol. 6(4), 467 (1983)CrossRef

40.

J.F. Silvain, A. Veillere, Y. Lu, Copper-carbon and aluminum-carbon fabricated by powder metallurgy processes, J. Physics, Eurotherm Seminar, 102, Conf. Sr. No. 525 (2014)

41.

P.M. Geffroy, J.F. Silvan, Structural and thermal properties of hot-pressed Cu/C matrix composites materials used for the thermal management of high power electronic devices. Mater. Sci. Forum 534-536, 1505–1508 (2007)CrossRef

42.

A. Burkert, Materials and Corrosion (Wiley, New York, 2001)

43.

H.P. Hack, Galvanic Corrosion (ASTM Intl, Philadelphia, 1988)CrossRef

44.

K. Upadhya, Ceramics and composites for rocket engines and space structures. J. Metals 44, 15–18 (1992)

45.

M. Singh, T.P. Shpargel, G.N. Morscher, R. Asthana, Active metal brazing and characterization of brazed joints in titanium to carbon-carbon composites. Mater. Sci. Eng. 412(1–2), 123 (2005)CrossRef

46.

R. Naslain, Materials design and Procrssing of high temperature ceramic matrix composites: state of the art and future trends. Adv. Compos. Mater. 8(1), 3 (1999)CrossRef

47.

Q. Zhang, G. Li, A review of the application of C/SiC composites in thermal protecting systems. Multidiscip. Model. Mater. Struct. 5(2), 199 (2009)CrossRef

48.

R.B. Deo, J.H. Starnes, R.C. Holzwarth, Low cost composite materials and structures for aircraft applications, Scitific and Technical Aerospace Rept. (STAR), 41 (22): 1-1-1-11, NASA, USA (2003)

49.

R. Naslain, Preparation and properties of non-oxide CMCs for application in engines and nuclear reactors, an overview. Compos. Sci. Technol. 64, 155 (2004)CrossRef

50.

Z. Rak, CF/SiC/C composites for tribological application, in High Temperature Ceramic Matrix Composites, ed. by W. Krenkel, R. Naslain, H. Schneider (Wiley, Weinheim, 2001), p. 820

51.

W. Krenkel, Carbon fibre reinforced silicon carbide composites, in Handbook of Ceramic Composites, ed. by N. P. Bansal (Springer, Heidelberg, 2005), p. 117

52.

C.P. Ju, C.K. Wang, H.Y. Cheng, J.H.C. Lin, Process and wear behavior of monolithic SiC and short carbon fiber-SiC matrix composite. J. Mater. Sci. 35, 4477 (2000)CrossRef

53.

W. Kucler, Chemische Technik: Prozesse, vol 8, ed. by R. Dittmeyer et al. (Wiley-VCH, Weinham, 2005), p. 11166

54.

C.A. Nannetti, A. Ortona, D.A. de Pinto, B. Riccardi, Manufacturing SiC-fibre reinforced SiC matrix composites by improved CVI/slurry infiltration/polymer impregnation and pyrolysis. J. Am. Ceram. Soc. 87, 1205 (2004)CrossRef

Titel: Carbon Composites and Related Metal Matrix
verfasst von: Tapan Gupta
Verlag: Springer International Publishing
Buch: Carbon
Print ISBN: 978-3-319-66404-0

Electronic ISBN: 978-3-319-66405-7

Copyright-Jahr: 2018
DOI: https://doi.org/10.1007/978-3-319-66405-7_3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht