nach oben

Cellulose

Erschienen in:

03.07.2020 | Original Research

Cellulose nanocrystal reinforced poly(lactic acid) nanocomposites prepared by a solution precipitation approach

verfasst von: Changxin Li, Ce Sun, Chengyu Wang, Haiyan Tan, Yanjun Xie, Yanhua Zhang

Erschienen in: Cellulose | Ausgabe 13/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The difficulty of dispersing cellulose nanocrystals (CNCs) in poly(lactic acid) (PLA) was still a primary obstacle to enhance the properties of PLA nanocomposites. In this work, two different methods were used to modify CNCs that were then added dropwise and mixed with the PLA solution to conveniently obtain the composites. Transmission electron microscopy and Fourier transform infrared spectroscopy were used to characterize CNCs before and after modification. Ultraviolet–visible spectroscopy, tensile tests, differential scanning calorimetry, and thermogravimetric analysis were used to characterize the PLA nanocomposites. The results revealed that the CNCs that were modified with surfactant had better dispersion and thermal stability in the PLA nanocomposites. The Young’s modulus and strength of PLA/SCNC nanocomposites were significantly reinforced (up to 66.0% and 29.8%, respectively). Meanwhile, the transmittance remained above 60% in the visible range. The solution precipitation approach was effective and simple, which could be used with other polymers.

Graphic abstract

Vorheriger Artikel Biotemplate synthesis of polypyrrole@bacterial cellulose/MXene nanocomposites with synergistically enhanced electrochemical performance

Nächster Artikel Thermal characterization and lifetime prediction of the PHBV/nanocellulose biocomposites using different kinetic approaches

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Abitbol T, Kloser E, Gray DG (2013) Estimation of the surface sulfur content of cellulose nanocrystals prepared by sulfuric acid hydrolysis. Cellulose 20(2):785–794CrossRef

Alvarado N, Romero J, Torres A, Lopez De Dicastillo C, Rojas A, Jose Galotto M (2018) Supercritical impregnation of thymol in poly(lactic acid) filled with electrospun poly(vinyl alcohol)-cellulose nanocrystals nanofibers: development an active food packaging material. J Food Eng 217:1–10CrossRef

Ansari F, Salajkova M, Zhou Q, Berglund LA (2015) Strong surface treatment effects on reinforcement efficiency in biocomposites based on cellulose nanocrystals in poly(vinyl acetate) matrix. Biomacromolecules 16(12):3916–3924PubMedCrossRef

Arrieta MP, Fortunati E, Dominici F, Rayon E, Lopez J, Kenny JM (2014) Multifunctional PLA-PHB/cellulose nanocrystal films: processing, structural and thermal properties. Carbohydr Polym 107:16–24PubMedCrossRef

Aulin C, Karabulut E, Amy T, Wagberg L, Lindstrom T (2013) Transparent nanocellulosic multilayer thin films on polylactic acid with tunable gas barrier properties. ACS Appl Mater Interfaces 5(15):7352–7359PubMedCrossRef

Azeredo HMC, Rosa MF, Mattoso LHC (2017) Nanocellulose in bio-based food packaging applications. Ind Crop Prod 97:664–671CrossRef

Bezerra Lima EM, Lima AM, Silva Minguita AP, Rojas Dos Santos NR, Soares Pereira IC, Matta Neves TT (2019) Poly(lactic acid) biocomposites with mango waste and organo-montmorillonite for packaging. J Appl Polym Sci 136:4751221

Boujemaoui A, Mongkhontreerat S, Malmstrom E, Carlmark A (2015) Preparation and characterization of functionalized cellulose nanocrystals. Carbohydr Polym 115:457–464PubMedCrossRef

Brinatti C, Huang J, Berry RM, Tam KC, Loh W (2016) Structural and energetic studies on the interaction of cationic surfactants and cellulose nanocrystals. Langmuir 32(3):689–698PubMedCrossRef

Chi K, Catchmark JM (2017) Enhanced dispersion and interface compatibilization of crystalline nanocellulose in polylactide by surfactant adsorption. Cellulose 24(11):4845–4860CrossRef

Dhar P, Kumar A, Katiyar V (2016a) Magnetic cellulose nanocrystal based anisotropic polylactic acid nanocomposite films: influence on electrical, magnetic, thermal, and mechanical properties. ACS Appl Mater Interfaces 8(28):18393–18409PubMedCrossRef

Dhar P, Tarafder D, Kumar A, Katiyar V (2016b) Thermally recyclable polylactic acid/cellulose nanocrystal films through reactive extrusion process. Polymer 87:268–282CrossRef

Dhar P, Gaur SS, Soundararajan N, Gupta A, Bhasney SM, Milli M (2017) Reactive extrusion of polylactic acid/cellulose nanocrystal films for food packaging applications: influence of filler type on thermomechanical, rheological, and barrier properties. Ind Eng Chem Res 56(16):4718–4735CrossRef

Fortunati E, Peltzer M, Armentano I, Torre L, Jimenez A, Kenny JM (2012) Effects of modified cellulose nanocrystals on the barrier and migration properties of PLA nano-biocomposites. Carbohydr Polym 90(2):948–956PubMedCrossRef

Fortunati E, Luzi F, Puglia D, Petrucci R, Kenny JM, Torre L (2015) Processing of PLA nanocomposites with cellulose nanocrystals extracted from Posidonia oceanica waste: innovative reuse of coastal plant. Ind Crop Prod 67:439–447CrossRef

Gan PG, Sam ST, Bin Abdullah MF, Omar MF (2019) Thermal properties of nanocellulose-reinforced composites: a review. J Appl Polym Sci 137:48544CrossRef

Gupta A, Simmons W, Schueneman GT, Hylton D, Mintz EA (2017) Rheological and thermo-mechanical properties of poly(lactic acid)/lignin-coated cellulose nanocrystal composites. ACS Sustain Chem Eng 5(2):1711–1720CrossRef

Hamad K, Kaseem M, Ayyoob M, Joo J, Deri F (2018) Polylactic acid blends: the future of green, light and tough. Prog Polym Sci 85:83–127CrossRef

Hong JS, Srivastava D, Lee I (2018) Fabrication of poly(lactic acid) nano- and microparticles using a nanomixer via nanoprecipitation or emulsion diffusion. J Appl Polym Sci 135:4619918

Hu C, Li Z, Wang Y, Gao J, Dai K, Zheng G (2017) Comparative assessment of the strain-sensing behaviors of polylactic acid nanocomposites: reduced graphene oxide or carbon nanotubes. J Mater Chem C 5(9):2318–2328CrossRef

Huang L, Ye Z, Berry R (2016) Modification of cellulose nanocrystals with quaternary ammonium-containing hyperbranched polyethylene ionomers by ionic assembly. ACS Sustain Chem Eng 4(9):4937–4950CrossRef

Kaboorani A, Riedl B (2015) Surface modification of cellulose nanocrystals (CNC) by a cationic surfactant. Ind Crop Prod 65:45–55CrossRef

Kargarzadeh H, Huang J, Lin N, Ahmad I, Mariano M, Dufresne A (2018) Recent developments in nanocellulose-based biodegradable polymers, thermoplastic polymers, and porous nanocomposites. Prog Polym Sci 87:197–227CrossRef

Khalil HPSA, Banerjee A, Saurabh CK, Tye YY, Suriani AB, Mohamed A (2018) Biodegradable films for fruits and vegetables packaging application: preparation and properties. Food Eng Rev 10(3):139–153CrossRef

Kian LK, Saba N, Jawaid M, Sultan MTH (2019) A review on processing techniques of bast fibers nanocellulose and its polylactic acid (PLA) nanocomposites. Int J Biol Macromol 121:1314–1328PubMedCrossRef

Lepeltier E, Bourgaux C, Couvreur P (2014) Nanoprecipitation and the “Ouzo effect”: application to drug delivery devices. Adv Drug Deliv Rev 71:86–97PubMedCrossRef

Lizundia E, Fortunati E, Dominici F, Luis Vilas J, Manuel Leon L, Armentano I (2016) PLLA-grafted cellulose nanocrystals: role of the CNC content and grafting on the PLA bionanocomposite film properties. Carbohydr Polym 142:105–113PubMedCrossRef

Luzi F, Fortunati E, Jimenez A, Puglia D, Pezzolla D, Gigliotti G (2016) Production and characterization of PLA_PBS biodegradable blends reinforced with cellulose nanocrystals extracted from hemp fibres. Ind Crop Prod 93(SI):276–289CrossRef

Mariano M, Pilate F, de Oliveira FB, Khelifa F, Dubois P, Raquez J, Dufresne A (2017) Preparation of cellulose nanocrystal-reinforced poly(lactic acid) nanocomposites through noncovalent modification with PLLA-based surfactants. ACS OMEGA 2(6):2678–2688PubMedPubMedCentralCrossRef

Monika Dhar P, Katiyar V (2017) Thermal degradation kinetics of polylactic acid/acid fabricated cellulose nanocrystal based bionanocomposites. Int J Biol Macromol 104(A):827–836PubMedCrossRef

Mujica-Garcia A, Hooshmand S, Skrifvars M, Kenny JM, Oksman K, Peponi L (2016) Poly(lactic acid) melt-spun fibers reinforced with functionalized cellulose nanocrystals. RSC Adv 6(11):9221–9231CrossRef

Murariu M, Doumbia A, Bonnaud L, Dechief A, Paint Y, Ferreira M (2011) High-performance polylactide/ZnO nanocomposites designed for films and fibers with special end-use properties. Biomacromolecules 12(5):1762–1771PubMedCrossRef

Nagalakshmaiah M, El Kissi N, Dufresne A (2016) Ionic compatibilization of cellulose nanocrystals with quaternary ammonium salt and their melt extrusion with polypropylene. ACS Appl Mater Interfaces 8(13):8755–8764PubMedCrossRef

Nair SS, Chen H, Peng Y, Huang Y, Yan N (2018) Polylactic acid biocomposites reinforced with nanocellulose fibrils with high lignin content for improved mechanical, thermal, and barrier properties. ACS Sustain Chem Eng 6(8):10058–10068CrossRef

Natterodt JC, Shirole A, Sapkota J, Zoppe JO, Weder C (2018) Polymer nanocomposites with cellulose nanocrystals made by co-precipitation. J Appl Polym Sci 135:4564824SICrossRef

Patel DK, Dutta SD, Lim K (2019) Nanocellulose-based polymer hybrids and their emerging applications in biomedical engineering and water purification. RSC Adv 9(33):19143–19162CrossRefPubMedPubMedCentral

Peelman N, Ragaert P, De Meulenaer B, Adons D, Peeters R, Cardon L (2013) Application of bioplastics for food packaging. Trends Food Sci Technol 32(2):128–141CrossRef

Pei A, Zhou Q, Berglund LA (2010) Functionalized cellulose nanocrystals as biobased nucleation agents in poly(l-lactide) (PLLA)—crystallization and mechanical property effects. Compos Sci Technol 70(5):815–821CrossRef

Petersson L, Kvien I, Oksman K (2007) Structure and thermal properties of poly(lactic acid)/cellulose whiskers nanocomposite materials. Compos Sci Technol 67(11–12):2535–2544CrossRef

Rabanel J, Faivre J, Tehrani SF, Lalloz A, Hildgen P, Banquy X (2015) Effect of the polymer architecture on the structural and biophysical properties of PEG-PLA nanoparticles. ACS Appl Mater Interfaces 7(19):10374–10385PubMedCrossRef

Ranjbar D, Raeiszadeh M, Lewis L, MacLachlan MJ, Hatzikiriakos SG (2020) Adsorptive removal of Congo red by surfactant modified cellulose nanocrystals: a kinetic, equilibrium, and mechanistic investigation. Cellulose 27(6):3211–3232CrossRef

Rasal RM, Janorkar AV, Hirt DE (2010) Poly(lactic acid) modifications. Prog Polym Sci 35(3):338–356CrossRef

Rhim J, Park H, Ha C (2013) Bio-nanocomposites for food packaging applications. Prog Polym Sci 38(10–11):1629–1652CrossRef

Robles E, Urruzola I, Labidi J, Serrano L (2015) Surface-modified nano-cellulose as reinforcement in poly(lactic acid) to conform new composites. Ind Crop Prod 71:44–53CrossRef

Roman M, Winter WT (2004) Effect of sulfate groups from sulfuric acid hydrolysis on the thermal degradation behavior of bacterial cellulose. Biomacromolecules 5(5):1671–1677PubMedCrossRef

Salajkova M, Berglund LA, Zhou Q (2012) Hydrophobic cellulose nanocrystals modified with quaternary ammonium salts. J Mater Chem 22(37):19798–19805CrossRef

Scaffaro R, Maio A, Lopresti F (2019) Effect of graphene and fabrication technique on the release kinetics of carvacrol from polylactic acid. Compos Sci Technol 169:60–69CrossRef

Shojaeiarani J, Bajwa DS, Stark NM (2018) Spin-coating: a new approach for improving dispersion of cellulose nanocrystals and mechanical properties of poly(lactic acid) composites. Carbohydr Polym 190:139–147PubMedCrossRef

Siakeng R, Jawaid M, Ariffin H, Sapuan SM, Asim M, Saba N (2019) Natural fiber reinforced polylactic acid composites: a review. Polym Compos 40(2):446–463CrossRef

Spinella S, Lo Re G, Liu B, Dorgan J, Habibi Y, Leclere P (2015) Polylactide/cellulose nanocrystal nanocomposites: efficient routes for nanofiber modification and effects of nanofiber chemistry on PLA reinforcement. Polymer 65:9–17CrossRef

Sung SH, Chang Y, Han J (2017) Development of polylactic acid nanocomposite films reinforced with cellulose nanocrystals derived from coffee silverskin. Carbohydr Polym 169:495–503PubMedCrossRef

Turner JF, Riga A, O’Connor A, Zhang J, Collis J (2004) Characterization of drawn and undrawn poly-l-lactide films by differential scanning calorimetry. J Therm Anal Calorim 75(1):257–268CrossRef

Vatansever E, Arslan D, Nofar M (2019) Polylactide cellulose-based nanocomposites. Int J Biol Macromol 137:912–938PubMedCrossRef

Wang T, Drzal LT (2012) Cellulose-nanofiber-reinforced poly(lactic acid) composites prepared by a water-based approach. ACS Appl Mater Interfaces 4(10):5079–5085PubMedCrossRef

Wang W, Liang T, Zhang B, Bai H, Ma P, Dong W (2018) Green functionalization of cellulose nanocrystals for application in reinforced poly(methyl methacrylate) nanocomposites. Carbohydr Polym 202:591–599PubMedCrossRef

Wang Z, Yao Z, Zhou J, He M, Jiang Q, Li A, Li S, Liu M, Luo S, Zhang D (2019) Improvement of polylactic acid film properties through the addition of cellulose nanocrystals isolated from waste cotton cloth. Int J Biol Macromol 129:878–886PubMedCrossRef

Wu H, Nagarajan S, Zhou L, Duan Y, Zhang J (2016) Synthesis and characterization of cellulose nanocrystal-graft-poly(d-lactide) and its nanocomposite with poly(l-lactide). Polymer 103:365–375CrossRef

Wu H, Nagarajan S, Shu J, Zhang T, Zhou L, Duan Y, Zhang J (2018) Green and facile surface modification of cellulose nanocrystal as the route to produce poly(lactic acid) nanocomposites with improved properties. Carbohydr Polym 197:204–214PubMedCrossRef

Xie Q, Wang S, Chen X, Zhou Y, Fang H, Li X, Cheng S, Ding Y (2018) Thermal stability and crystallization behavior of cellulose nanocrystals and their poly(l-lactide) nanocomposites: effects of surface ionic group and poly(d-lactide) grafting. Cellulose 25(12):6847–6862CrossRef

Xu C, Chen J, Wu D, Chen Y, Lv Q, Wang M (2016) Polylactide/acetylated nanocrystalline cellulose composites prepared by a continuous route: a phase interface-property relation study. Carbohydr Polym 146:58–66PubMedCrossRef

Xu T, Yang H, Yang D, Yu Z (2017) Polylactic acid nanofiber Scaffold decorated with chitosan islandlike topography for bone tissue engineering. ACS Appl Mater Interfaces 9(25):21094–21104PubMedCrossRef

Yin Y, Zhao L, Jiang X, Wang H, Gao W (2017) Poly(lactic acid)-based biocomposites reinforced with modified cellulose nanocrystals. Cellulose 24(11):4773–4784CrossRef

Yin Y, Ma J, Tian X, Jiang X, Wang H, Gao W (2018) Cellulose nanocrystals functionalized with amino-silane and epoxy-poly(ethylene glycol) for reinforcement and flexibilization of poly(lactic acid): material preparation and compatibility mechanism. Cellullose 25(11):6447–6463CrossRef

Yu H, Wang C, Abdalkarim SYH (2017a) Cellulose nanocrystals/polyethylene glycol as bifunctional reinforcing/compatibilizing agents in poly(lactic acid) nanofibers for controlling long-term in vitro drug release. Cellulose 24(10):4461–4477CrossRef

Yu H, Zhang H, Song M, Zhou Y, Yao J, Ni Q (2017b) From cellulose nanospheres, nanorods to nanofibers: various aspect ratio induced nucleation/reinforcing effects on polylactic acid for robust-barrier food packaging. ACS Appl Mater Interfaces 9(50):43920–43938PubMedCrossRef

Zhang Y, Jiang Y, Han L, Wang B, Xu H, Zhong Y (2018) Biodegradable regenerated cellulose-dispersed composites with improved properties via a pickering emulsion process. Carbohydr Polym 179:86–92PubMedCrossRef

Titel: Cellulose nanocrystal reinforced poly(lactic acid) nanocomposites prepared by a solution precipitation approach
verfasst von: Changxin Li
Ce Sun
Chengyu Wang
Haiyan Tan
Yanjun Xie
Yanhua Zhang
Publikationsdatum: 03.07.2020
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 13/2020
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-020-03294-4

Springer Professional

Abstract

Graphic abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 13/2020

Fabrication of special wettability functionalized Mg(OH)2@cotton fabric for oil/water mixtures and emulsions separation

Combined mechanical grinding and enzyme post-treatment leading to increased yield and size uniformity of cellulose nanofibrils

Sensory profile of hemicellulose-rich wood extracts in yogurt models

Experimental and theoretical studies of chitosan modified titanium dioxide composites for uranium and europium removal

Effect of liquid impregnation on DBD atmospheric pressure plasma treatment of cotton

Heteroacoagulation of lignocellulose fibers-based biotemplates and functionalized TiO2 nanoparticles to tailor film microstructures