nach oben

Wood Science and Technology

Erschienen in:

01.07.2013 | Original

Changes in the microstructure of birch wood after hydrothermal treatment

verfasst von: Vladimirs Biziks, Bruno Andersons, Ļubova Beļkova, Elīna Kapača, Holger Militz

Erschienen in: Wood Science and Technology | Ausgabe 4/2013

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Birch wood (Betula pendula) samples were treated in a thermal regime (140, 160, 180 °C) for 1 h and investigated by means of scanning electron microscopy (SEM). SEM microimages of the wood cross-section were taken from one and the same place before and after the thermal treatment (magnification 100–2,000×). The results of measurements of areas and linear sizes of the birch wood cells show significant changes, which depend on the thermal treatment conditions and the type of the cell: libriform, tracheid, vessel and ray. After the treatment at 180 °C, the integrity of wood morphological structure begins to break up. Voids and cracks are formed between fibres, thus leading to a decline in the mechanical properties of the wood.

Vorheriger Artikel Wood colour in Lapacho (Tabebuia serratifolia): chemical composition and industrial implications

Nächster Artikel Characterisation of pore size distributions in variously dried Pinus radiata: analysis by thermoporosimetry

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Alén R, Kotilainen R, Zaman A (2002) Thermochemical behavior of Norway spruce (Picea abies) at 180–225°C. Wood Sci Technol 36:163–171CrossRef

Andersons B, Biziks V, Irbe I, Chirkova J, Grinins J (2008) Thermal modification of soft deciduous wood. 4th Meeting of the Nordic Baltic network of wood material science and engineering (WSE), Riga, pp 63–68

Awoyemi L, Jones PI (2010) Anatomical explanations for the changes in properties of western red cedar (Thuja plicata) wood during heat treatment. Wood Sci Technol 45:261–267CrossRef

Boonstra MJ, Rijsdijk JF, Sander C, Kegel E, Tjeerdsma BF, Militz H, Van Acker J, Stevens M (2006a) Physical aspects of heat-treated wood. Part 1. Softwoods. Maderas. Cienc y Tecnol 8:193–208

Boonstra MJ, Rijsdijk JF, Sander C, Kegel E, Tjeerdsma BF, Militz H, Van Acker J, Stevens M (2006b) Physical aspects of heat-treated wood. Part 2. Hardwoods. Maderas. Cienc y Tecnol 8:209–217

Bourgois J, Guyonnet R (1988) Characterization and analysis of torrefied wood. Wood Sci Technol 22:143–155CrossRef

Dietrichs HH, Sinner H, Puls J (1978) Potential of steaming hardwoods and straw for feed and food production. Holzforschung 32:193–199CrossRef

Dudkin MS, Gromov VS, Vedernikov NA, Katkevich RG, Cherno NK (1991) Hemicelluloses. Zinatne, Riga, p 488 ISBN 5-7966-0377-9. (in Russian)

EN350-2 (1994) Durability of wood and wood-based products—natural durability of solid wood Part 2 Guide to natural durability and treatability of selected wood species of importance in Europe. European Committee for Standardization, Brussel

Esteves B, Marques AV, Domingos I, Pereira HM (2007) Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood. Wood Sci Technol 41:193–207CrossRef

Esteves BM, Domingos IJ, Pereira HM (2008) Pine wood modification by heat treatment in air. Bio Res 3(1):142–154

Fengel D, Wegener G (1989) Wood: chemistry, ultrastructure, reactions. Walter de Gruyter & Co, Berlin, p 613

Gromov VS, Yevdokimov AM, Abramovich CL, Hrol YS (1977) Investigation of lignin distribution in wood and its delignification topochemistry by UV microspectrophotometry. I Lignin distribution in birch wood cell walls. Wood Chem 6:73–79 (in Russian)

Hill CAS (2006) Wood Modification: Chemical, Thermal and Other Processes. John Wiley & Sons p 239, ISBN: 0-470-02172-1

Militz H (2002) Heat treatment of wood: European processes and their background. The International Research Group on wood protection. Document IRG/WP02-40241

Rowell RM (2005) In: Rowell RM (ed) Handbook of wood chemistry and wood composites. Taylor & Francis Group. CRC Press, Boca Raton, Fl,. p 462, ISBN 0-8493-1588-3

Sang OK, Won JS, Hansol C, Byoung CK, In JC (1999) Rheological investigation on the anisotropic phase of cellulose–MMNO/H2O solution system. Polymer 40:6443–6450CrossRef

Scheiding W (2008) Entwiclung des TMT Sektors seit 2008. 5^th Eropäischer TMT—Workshop 2008. Dresden

Sivonen H, Maunu SL, Sundholm F, Jämsä S, Viitaniemi P (2002) Magnetic resonance studies of thermally modified wood. Holzforschung 56:648–654CrossRef

Tjeerdsma BF, Boonstra M, Pizzi A, Tekely P, Militz H (1998) Characterisation of thermally modified wood: molecular reasons for wood performance improvement. Holz Roh Werkst 56:149–153CrossRef

Weiland JJ, Guyonnet R (2003) Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz Roh Werkst 61:216–220

Wikberg H, Maunu SL (2004) Characterisation of thermally modified hard- and soft-woods by 13C CPMAS NMR. Carbohydr Polym 58:461–466CrossRef

Zaman A, Alén R, Kotilainen R (2000) Thermal behavior of (Pinus sylvestris) and (Betula pendula) at 200-230°C. Wood Fiber Sci 32:138–143 http://www.zm.gov.lv/doc_upl/mezaudzu_kraja.pdf

Titel: Changes in the microstructure of birch wood after hydrothermal treatment
verfasst von: Vladimirs Biziks
Bruno Andersons
Ļubova Beļkova
Elīna Kapača
Holger Militz
Publikationsdatum: 01.07.2013
Verlag: Springer-Verlag
Erschienen in: Wood Science and Technology / Ausgabe 4/2013
Print ISSN: 0043-7719
Elektronische ISSN: 1432-5225
DOI: https://doi.org/10.1007/s00226-013-0531-1

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 4/2013

Comparison of different approaches for automatic bark detection on log images

Wood colour in Lapacho (Tabebuia serratifolia): chemical composition and industrial implications

Effect of heat treatment intensity on some conferred properties of different European softwood and hardwood species

Characterisation of pore size distributions in variously dried Pinus radiata: analysis by thermoporosimetry

The potential of moisture content measurements for testing the durability of timber products

Timber species grouping in Bangladesh: linking wood properties