Characteristics of CeOx–VO₂ composite thin films synthesized by sol–gel process

Pure vanadium dioxide (VO₂) and CeOx–VO₂ (1.5 < x < 2) composite thin films were grown on muscovite substrate by inorganic sol–gel process using vanadium pentaoxide and cerium(III) nitrate hexahydrate powder as precursor. The crystalline structure, morphology and phase transition properties of the thin films were systematically investigated by X-ray diffraction, Raman, X-ray photoelectron spectroscopy, FE-SEM and optical transmission measurements. High quality of the VO₂ and CeOx–VO₂ composite films were obtained, in which the relative fractions of +4 valence state vanadium were above 70 % though the concentrations of cerium reached 9.77 at %. However, much of cerium compounds were formed at the edge of grains and the addition of cerium resulted in more clearly defined grain boundaries as shown in SEM images. Meanwhile, the composite films exhibited excellent phase transition properties and the infrared transmittance decreased from about 70 to 10 % at λ = 4 μm bellow and above the metal–insulator phase transition temperature. The metal–insulator phase transition temperatures were quite similar with about 66 °C of the pure VO₂ and CeOx–VO₂ composite thin films. But hysteresis widths increased with more addition of cerium, due to the limiting effect of grain boundaries on the propagation of the phase transition. Particularly, the CeOx–VO₂ composite film with an addition of 7.82 at % Ce showed a largest hysteresis width with about 20.6 °C. In addition, the thermochromic performance of visible transmittance did not change obviously with more addition of cerium.