nach oben

Journal of Materials Engineering and Performance

Erschienen in:

30.11.2020

Characteristics of Metal Specimens Formed by Selective Laser Melting: A State-of-the-Art Review

verfasst von: Dongju Chen, Peng Wang, Ri Pan, Chunqing Zha, Jinwei Fan, Dong Liang, You Zhao

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 10/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The process of selective laser melting (SLM) is complex and instantaneous, which communicates with a variety of physical phenomena such as solid–liquid phase transition. The microstructure and material properties are favorable evidence to explain the SLM forming mechanism. In this paper, the forming properties of the iron-based alloy, titanium-based alloys, and aluminum-based alloys are discussed, which are relatively mature in research. The influence of processing strategy on the density and quality of metal specimens is briefly introduced. The research progress of microstructure and mechanical properties of metal specimens formed by SLM is mainly introduced. Also, the influence of processing parameters and heat treatment on the microstructure and the effect of microstructure on mechanical properties are summarized. The corrosion behavior of metal specimens formed by SLM is analyzed. Furthermore, the research development of copper-based alloys, shape memory alloys, and high-entropy alloys is presented. Finally, the problems encountered in the alloys forming process are described, and the future development direction has prospected.

Nächster Artikel A Review on the Effect of Impact Toughness and Fracture Toughness on Impact-Abrasion Wear

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

S. Dadbakhsh, R. Mertens, L. Hao, J.V. Humbeeck, and J.P. Kruth, Selective Laser Melting to Manufacture “In Situ” Metal Matrix Composites: A review, Adv. Eng. Mater., 2019, 21, p 1801244. https://doi.org/10.1002/adem.201801244CrossRef

J.P. Kruth, L. Froyen, J.V. Vaerenbergh, P. Mercelis, M. Rombouts, and B. Lauwers, Selective Laser Melting of Iron-based Powder, J. Mater. Process. Technol., 2004, 149, p 616–622. https://doi.org/10.1016/j.jmatprotec.2003.11.051CrossRef

J.P. Kruth, G. Levy, F. Klocke, and T.H.C. Childs, Consolidation Phenomena in Laser and Powder-bed Based Layered Manufacturing, CIRP Ann., 2007, 56, p 730–759. https://doi.org/10.1016/j.cirp.2007.10.004CrossRef

J. Zhang, B. Song, Q. Wei, D. Bourell, and Y. Shi, A Review of Selective Laser Melting of Aluminum Alloys: Processing, Microstructure, Property and Developing Trends, J. Mater. Sci. Technol., 2019, 35, p 270–284. https://doi.org/10.1016/j.jmst.2018.09.004CrossRef

H.K. Rafi, N.V. Karthik, H. Gong, T.L. Starr, and B.E. Stucker, Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting, J. Mater. Eng. Perform., 2013, 22, p 3872–3883. https://doi.org/10.1007/s11665-013-0658-0CrossRef

B. Song, S. Dong, P. Coddet, H. Liao, and C. Coddet, Fabrication of NiCr Alloy Parts by Selective Laser Melting: Columnar Microstructure and Anisotropic Mechanical Behavior, Mater. Des., 2014, 53, p 1–7. https://doi.org/10.1016/j.matdes.2013.07.010CrossRef

S.A.M. Tofail, E.P. Koumoulos, A. Bandyopadhyay, S. Bose, L. O’Donoghue, and C. Charitidis, Additive Manufacturing: Scientific and Technological Challenges, Market Uptake and Opportunities, Mater. Today, 2018, 21(1), p 22–37. https://doi.org/10.1016/j.mattod.2017.07.001CrossRef

C. Wang, X.P. Tan, Z. Du, S. Chandra, Z. Sun, C.W.J. Lim, S.B. Tor, C.S. Lim, and C.H. Wong, Additive Manufacturing of NiTi Shape Memory Alloys Using Pre-Mixed Powders, J. Mater. Process. Technol., 2019, 271, p 152–161. https://doi.org/10.1016/j.jmatprotec.2019.03.025CrossRef

B. Zhang, J. Chen, and C. Coddet, Microstructure and Transformation Behavior of In-situ Shape Memory Alloys by Selective Laser Melting Ti–Ni Mixed Powder, J. Mater. Sci. Technol., 2013, 29, p 863–867. https://doi.org/10.1016/j.jmst.2013.05.006CrossRef

10.

K. Guan, Z. Wang, M. Gao, X. Li, and X. Zeng, Effects of Processing Parameters on Tensile Properties of Selective Laser Melted 304 Stainless Steel, Mater. Des., 2013, 50, p 581–586. https://doi.org/10.1016/j.matdes.2013.03.056CrossRef

11.

L.E. Murr, E. Martinez, J. Hernandez, S. Collins, K.N. Amato, S.M. Gaytan, and P.W. Shindo, Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting, J. Mater. Res. Technol., 2012, 1, p 167–177. https://doi.org/10.1016/S2238-7854(12)70029-7CrossRef

12.

C.C. Ng, M.M. Savalani, M.L. Lau, and H.C. Man, Microstructure and Mechanical Properties of Selective Laser Melted Magnesium, Appl. Surf. Sci., 2011, 257, p 7447–7454. https://doi.org/10.1016/j.apsusc.2011.03.004CrossRef

13.

M. Gieseke, C. Noelke, S. Kaierle, V. Wesling, and H. Haferkamp, Selective Laser Melting of Magnesium and Magnesium Alloys BT—Magnesium Technology 213. N. Hort, S.N. Mathaudhu, N.R. Neelameggham, and M. Alderman, Eds., Springer, Cham, 2016, p 65–68. https://doi.org/10.1007/978-3-319-48150-0_11CrossRef

14.

X.P. Li, X.J. Wang, M. Saunders, A. Suvorova, L.C. Zhang, Y.J. Liu, M.H. Fang, Z.H. Huang, and T.B. Sercombe, A Selective Laser Melting and Solution Heat Treatment Refined Al–12Si Alloy with a Controllable Ultrafine Eutectic Microstructure and 25% Tensile Ductility, Acta Mater., 2015, 95, p 74–82. https://doi.org/10.1016/j.actamat.2015.05.017CrossRef

15.

K. Kempen, L. Thijs, J. Van Humbeeck, and J.-P. Kruth, Processing AlSi10Mg by Selective Laser Melting: Parameter Optimisation and Material Characterisation, Mater. Sci. Technol., 2015, 31, p 917–923. https://doi.org/10.1179/1743284714Y.0000000702CrossRef

16.

H. Yu, J. Yang, J. Yin, Z. Wang, and X. Zeng, Comparison on Mechanical Anisotropies of Selective Laser Melted Ti–6Al–4V Alloy and 304 Stainless Steel, Mater. Sci. Eng. A, 2017, 695, p 92–100. https://doi.org/10.1016/j.msea.2017.04.031CrossRef

17.

H. Attar, S. Ehtemam-Haghighi, D. Kent, and M.S. Dargusch, Recent Developments and Opportunities in Additive Manufacturing of Titanium-Based Matrix Composites: A Review, Int. J. Mach. Tools Manuf., 2018, 133, p 85–102. https://doi.org/10.1016/j.ijmachtools.2018.06.003CrossRef

18.

Z. Wang, K. Guan, M. Gao, X. Li, X. Chen, and X. Zeng, The Microstructure and Mechanical Properties of Deposited-IN718 by Selective Laser Melting, J. Alloys Compd., 2012, 513, p 518–523. https://doi.org/10.1016/j.jallcom.2011.10.107CrossRef

19.

T.D. McLouth, G.E. Bean, D.B. Witkin, S.D. Sitzman, P.M. Adams, D.N. Patel, W. Park, J.-M. Yang, and R.J. Zaldivar, The Effect of Laser Focus Shift on Microstructural Variation of Inconel 718 Produced by Selective Laser Melting, Mater. Des., 2018, 149, p 205–213. https://doi.org/10.1016/j.matdes.2018.04.019CrossRef

20.

L. Wu, H. Zhu, X. Gai, and Y. Wang, Evaluation of the Mechanical Properties and Porcelain Bond Strength of Cobalt–Chromium Dental Alloy Fabricated by Selective Laser Melting, J. Prosthet. Dent., 2014, 111, p 51–55. https://doi.org/10.1016/j.prosdent.2013.09.011CrossRef

21.

P. Fox, S. Pogson, C.J. Sutcliffe, and E. Jones, Interface Interactions Between Porous Titanium/Tantalum Coatings, Produced by Selective Laser Melting (SLM), on A Cobalt–chromium Alloy, Surf. Coat. Technol., 2008, 202, p 5001–5007. https://doi.org/10.1016/j.surfcoat.2008.05.003CrossRef

22.

G.M. Karthik, P. Sathiyamoorthi, A. Zargaran, J.M. Park, P. Asghari-Rad, S. Son, S.H. Park, and H.S. Kim, Novel Precipitation and Enhanced Tensile Properties in Selective Laser Melted Cu-Sn Alloy, Materialia, 2020, 13, p 100861. https://doi.org/10.1016/j.mtla.2020.100861CrossRef

23.

D.Q. Zhang, Z.H. Liu, Q.Z. Cai, J.H. Liu, and C.K. Chua, Influence of Ni Content on Microstructure of W–Ni Alloy Produced by Selective Laser Melting, Int. J. Refract. Met. Hard Mater., 2014, 45, p 15–22. https://doi.org/10.1016/j.ijrmhm.2014.02.007CrossRef

24.

S. Li, H. Hassanin, M.M. Attallah, N.J.E. Adkins, and K. Essa, The Development of TiNi-based Negative Poisson’s Ratio Structure Using Selective Laser Melting, Acta Mater., 2016, 105, p 75–83. https://doi.org/10.1016/j.actamat.2015.12.017CrossRef

25.

H. Attar, K.G. Prashanth, L.C. Zhang, M. Calin, I.V. Okulov, S. Scudino, C. Yang, and J. Eckert, Effect of Powder Particle Shape on the Properties of in Situ Ti–TiB Composite Materials Produced by Selective Laser Melting, J. Mater. Sci. Technol., 2015, 31, p 1001–1005. https://doi.org/10.1016/j.jmst.2015.08.007CrossRef

26.

H.J. Niu and I.T.H. Chang, Selective Laser Sintering of Gas and Water Atomized High Speed Steel Powders, Scr. Mater., 1999, 41, p 25–30. https://doi.org/10.1016/s1359-6462(99)00089-5CrossRef

27.

J. Mazumder, D. Dutta, N. Kikuchi, and A. Ghosh, Closed Loop Direct Metal Deposition: Art to Part, Opt. Lasers Eng., 2000, 34, p 397–414. https://doi.org/10.1016/S0143-8166(00)00072-5CrossRef

28.

D. Bourell, B. Stucker, A.B. Spierings, N. Herres, and G. Levy, Influence of the Particle Size Distribution on Surface Quality and Mechanical Properties in AM Steel Parts, Rapid Prototyping J., 2011, 17, p 195–202. https://doi.org/10.1108/13552541111124770CrossRef

29.

A. Spierings and G. Levy, Comparison of Density of Stainless Steel 316L Parts Produced with Selective Laser Melting Using Different Powder Grades, in 20th Annu. Int. Solid Free. Fabr. Symp. SFF 2009, 2009.

30.

B. Liu, R. Wildman, C. Tuck, I. Ashcroft, and R. Hague, Investigaztion the Effect of Particle Size Distribution on Processing Parameters Optimisation in Selective Laser Melting Process, in 22nd Annu. Int. Solid Free. Fabr. Symp.—An Addit. Manuf. Conf. SFF 2011, 2011.

31.

H. Gu, H. Gong, J. j. Dilip, D. Pal, A. Hicks, H. Doak, and B. Stucker, Effects of Powder Variation on the Microstructure and Tensile Strength of Ti6Al4V Parts Fabricated by Selective Laser Melting, 2014.

32.

L. Technology, Vacuum vs Non-vacuum Melted Gas Atomised Powders, LPW Technology, CASE STUDY, 09, 2017.

33.

J. Wang, X.L. Zhou, J. Li, M. Brochu, and Y.F. Zhao, Microstructures and Properties of SLM-Manufactured Cu–15Ni–8Sn Alloy, Addit. Manuf., 2020, 31, p 100921. https://doi.org/10.1016/j.addma.2019.100921CrossRef

34.

S. Dadbakhsh, M. Speirs, J.P. Kruth, and J. Van Humbeeck, Influence of SLM on Shape Memory and Compression Behaviour of NiTi Scaffolds, CIRP Ann., 2015, 64, p 209–212. https://doi.org/10.1016/j.cirp.2015.04.039CrossRef

35.

W. Shi, P. Wang, Y. Liu, Y. Hou, and G. Han, Properties of 316L Formed by a 400 W Power Laser Selective Laser Melting with 250 μm Layer Thickness, Powder Technol., 2020, 360, p 151–164. https://doi.org/10.1016/j.powtec.2019.09.059CrossRef

36.

Z. Wang, Z. Xiao, Y. Tse, C. Huang, and W. Zhang, Optimization of Processing Parameters and Establishment of a Relationship between Microstructure and Mechanical Properties of SLM titanium Alloy, Opt. Laser Technol., 2019, 112, p 159–167. https://doi.org/10.1016/j.optlastec.2018.11.014CrossRef

37.

S. Liu, H. Zhu, G. Peng, J. Yin, and X. Zeng, Microstructure Prediction of Selective Laser Melting AlSi10Mg Using Finite Element Analysis, Mater. Des., 2018, 142, p 319–328. https://doi.org/10.1016/j.matdes.2018.01.022CrossRef

38.

Y. Gao, D. Zhang, M. Cao, R. Chen, Z. Feng, R. Poprawe, J.H. Schleifenbaum, and S. Ziegler, Effect of δ Phase on High Temperature Mechanical Performances of Inconel 718 Fabricated with SLM Process, Mater. Sci. Eng. A, 2019, 767, p 138327. https://doi.org/10.1016/j.msea.2019.138327CrossRef

39.

M. Peter and J.P. Kruth, Residual Stresses in Selective Laser Sintering and Selective Laser Melting, Rapid Prototyping J., 2006, 12, p 254–265. https://doi.org/10.1108/13552540610707013CrossRef

40.

W.H. Yu, S.L. Sing, C.K. Chua, C.N. Kuo, and X.L. Tian, Particle-reinforced Metal Matrix Nanocomposites Fabricated by Selective Laser Melting: A State of the Art Review, Prog. Mater. Sci., 2019, 104, p 330–379. https://doi.org/10.1016/j.pmatsci.2019.04.006CrossRef

41.

J. Ma, J. Zhang, W. Liu, and Z. Shen, Suppressing Pore-boundary Separation during Spark Plasma Sintering of Tungsten, J. Nucl. Mater., 2013, 438, p 199–203. https://doi.org/10.1016/j.jnucmat.2013.03.042CrossRef

42.

Y. Liu, Y. Yang, S. Mai, D. Wang, and C. Song, Investigation into Spatter Behavior during Selective Laser Melting of AISI 316L Stainless Steel Powder, Mater. Des., 2015, 87, p 797–806. https://doi.org/10.1016/j.matdes.2015.08.086CrossRef

43.

M. Markl and C. Körner, Multiscale Modeling of Powder Bed–based Additive Manufacturing, Ann. Rev. Mater. Res., 2016, 46, p 93–123. https://doi.org/10.1146/annurev-matsci-070115-032158CrossRef

44.

F. Verhaeghe, T. Craeghs, J. Heulens, and L. Pandelaers, A Pragmatic Model for Selective Laser Melting with Evaporation, Acta Mater., 2009, 57, p 6006–6012. https://doi.org/10.1016/j.actamat.2009.08.027CrossRef

45.

A. Masmoudi, R. Bolot, and C. Coddet, Investigation of the Laser–Powder–Atmosphere Interaction Zone during the Selective Laser Melting Process, J. Mater. Process. Technol., 2015, 225, p 122–132. https://doi.org/10.1016/j.jmatprotec.2015.05.008CrossRef

46.

Y.C. Wu, C.H. San, C.H. Chang, H.J. Lin, R. Marwan, S. Baba, and W.S. Hwang, Numerical Modeling of Melt-pool Behavior in Selective Laser Melting with Random Powder Distribution and Experimental Validation, J. Mater. Process. Technol., 2018, 254, p 72–78. https://doi.org/10.1016/j.jmatprotec.2017.11.032CrossRef

47.

W. Kurz, C. Bezencon, and M. Gäumann, Columnar to Equiaxed Transition in Solidification Processing, Sci. Technol. Adv. Mater., 2001, 2, p 185. https://doi.org/10.1016/S1468-6996(01)00047-XCrossRef

48.

Q. Zhang, H. Xue, Q. Tang, S. Pan, M. Rettenmayr, and M. Zhu, Microstructural Evolution during Temperature Gradient Zone Melting: Cellular Automaton Simulation and Experiment, Comput. Mater. Sci., 2018, 146, p 204–212. https://doi.org/10.1016/j.commatsci.2018.01.032CrossRef

49.

K.G. Prashanth and J. Eckert, Formation of Metastable Cellular Microstructures in Selective Laser Melted Alloys, J. Alloys Compd., 2017, 707, p 7–34. https://doi.org/10.1016/j.jallcom.2016.12.209CrossRef

50.

M. Bernhard, Additive Manufacturing Technologies—Rapid Prototyping to Direct Digital Manufacturing, Assem. Autom., 2012, https://doi.org/10.1108/aa.2012.03332baa.010CrossRef

51.

W. Di, Y. Liu, Y. Yang, and D. Xiao, Theoretical and Experimental Study on Surface Roughness of 316L Stainless Steel Metal Parts Obtained through Selective Laser Melting, Rapid Prototyping J., 2016, 22, p 706–716. https://doi.org/10.1108/RPJ-06-2015-0078CrossRef

52.

G. Strano, L. Hao, R.M. Everson, and K.E. Evans, Surface Roughness Analysis, Modelling and Prediction in Selective Laser Melting, J. Mater. Process. Technol., 2013, 213, p 589–597. https://doi.org/10.1016/j.jmatprotec.2012.11.011CrossRef

53.

Y. Yang, Accuracy and Density Optimization in Directly Fabricating Customized Orthodontic Production by Selective Laser Melting, Rapid Prototyping J., 2012, 18, p 482–489. https://doi.org/10.1108/13552541211272027CrossRef

54.

W. Di, Y. Yongqiang, S. Xubin, and C. Yonghua, Study on Energy Input and its Influences on Single-track, Multi-track, and Multi-Layer in SLM, Int. J. Adv. Manuf. Technol., 2012, 58, p 1189–1199. https://doi.org/10.1007/s00170-011-3443-yCrossRef

55.

Z. Sun, X. Tan, S.B. Tor, and W.Y. Yeong, Selective Laser Melting of Stainless Steel 316L with Low Porosity and High Build Rates, Mater. Des., 2016, 104, p 197–204. https://doi.org/10.1016/j.matdes.2016.05.035CrossRef

56.

S. Wang, Y. Liu, W. Shi, B. Qi, J. Yang, F. Zhang, D. Han, and Y. Ma, Research on High Layer Thickness Fabricated of 316L by Selective Laser Melting, Materials, 2017, 10, p 1055. https://doi.org/10.3390/ma10091055CrossRef

57.

Y. Zhong, L. Liu, S. Wikman, D. Cui, and Z. Shen, Intragranular Cellular Segregation Network Structure Strengthening 316L Stainless Steel Prepared by Selective Laser Melting, J. Nucl. Mater., 2016, 470, p 170–178. https://doi.org/10.1016/j.jnucmat.2015.12.034CrossRef

58.

I. Simonovski and L. Cizelj, Computational Multiscale Modeling of Intergranular Cracking, J. Nucl. Mater., 2011, 414, p 243–250. https://doi.org/10.1016/j.jnucmat.2011.03.051CrossRef

59.

I. Simonovski and L. Cizelj, Cohesive Element Approach to Grain Level Modelling of Intergranular Cracking, Eng. Fract. Mech., 2013, 110, p 364–377. https://doi.org/10.1016/j.engfracmech.2013.05.011CrossRef

60.

A. Ahmadi, R. Mirzaeifar, N.S. Moghaddam, A.S. Turabi, H.E. Karaca, and M. Elahinia, Effect of Manufacturing Parameters on Mechanical Properties of 316L Stainless Steel Parts Fabricated by Selective Laser Melting: A Computational Framework, Mater. Des., 2016, 112, p 328–338. https://doi.org/10.1016/j.matdes.2016.09.043CrossRef

61.

D. Wang, C. Song, Y. Yang, and Y. Bai, Investigation of Crystal Growth Mechanism during Selective Laser Melting and Mechanical Property Characterization of 316L Stainless Steel Parts, Mater. Des., 2016, 100, p 291–299. https://doi.org/10.1016/j.matdes.2016.03.111CrossRef

62.

J. Suryawanshi, K.G. Prashanth, and U. Ramamurty, Mechanical Behavior of Selective Laser Melted 316L Stainless Steel, Mater. Sci. Eng. A, 2017, 696, p 113–121. https://doi.org/10.1016/j.msea.2017.04.058CrossRef

63.

J.M. Jeon, J.M. Park, J.-H. Yu, J.G. Kim, Y. Seong, S.H. Park, and H.S. Kim, Effects of Microstructure and Internal Defects on Mechanical Anisotropy and Asymmetry of Selective Laser-Melted 316L Austenitic Stainless Steel, Mater. Sci. Eng. A, 2019, 763, p 138152. https://doi.org/10.1016/j.msea.2019.138152CrossRef

64.

Z. Zhang, B. Chu, L. Wang, and Z. Lu, Comprehensive Effects of Placement Orientation and Scanning Angle on Mechanical Properties and Behavior of 316L Stainless Steel Based on the Selective Laser Melting Process, J. Alloys Compd., 2019, https://doi.org/10.1016/j.jallcom.2019.03.082CrossRef

65.

T. Simson, A. Emmel, A. Dwars, and J. Böhm, Residual Stress Measurements on AISI 316L Samples Manufactured by Selective Laser Melting, Addit. Manuf., 2017, 17, p 183–189. https://doi.org/10.1016/j.addma.2017.07.007CrossRef

66.

A. Metals, Properties and Selection Stainless Steels, Tool Materials and Special-Purpose Metals, Metals Handbook, Vol. 3, ASM, Metals Park, 1980

67.

M.S.I.N. Kamariah, W.S.W. Harun, F. Ahmad, and F. Tarlochan, Mechanical Behaviours of Selective Laser Melting 316L Stainless Steel, J. Addit. Manuf. Adv. Mater., 2020, 1, p 1–18. https://journal.scientiaca.org/index.php/jams/article/view/55.

68.

V. Sufiiarov, E. Borisov, I. Polozov, and D. Masaylo, Study of Microstructure and Properties of 316L Steel after Selective Laser Melting, 2016.

69.

T. Larimian, M. Kannan, D. Grzesiak, and B. Al-Mangour, Effect of Energy Density and Scanning Strategy on Densification, Microstructure and Mechanical Properties of 316L Stainless Steel Processed via Selective Laser Melting, Mater. Sci. Eng. A, 2019, 770, p 138455. https://doi.org/10.1016/j.msea.2019.138455CrossRef

70.

O.O. Salman, C. Gammer, J. Eckert, M.Z. Salih, E.H. Abdulsalam, K.G. Prashanth, and S. Scudino, Selective Laser Melting of 316L Stainless Steel: Influence of TiB2 Addition on Microstructure and Mechanical Properties, Mater. Today Commun., 2019, 21, p 100615. https://doi.org/10.1016/j.mtcomm.2019.100615CrossRef

71.

S. Yin, X. Yan, R. Jenkins, and C. Chen, Hybrid Additive Manufacture of 316L Stainless Steel with Cold Spray and Selective Laser Melting: Microstructure and Mechanical Properties, J. Mater. Process. Technol., 2019, 273, p 116248. https://doi.org/10.1016/j.jmatprotec.2019.05.029. https://doi.org/10.1016/j.msea.2017.04.058.

72.

P. Guo, B. Zou, C. Huang, and H. Gao, Study on Microstructure, Mechanical Properties and Machinability of Efficiently Additive Manufactured AISI 316L Stainless Steel by High-Power Direct Laser Deposition, J. Mater. Process. Technol., 2017, 240, p 12–22. https://doi.org/10.1016/j.jmatprotec.2016.09.005CrossRef

73.

R. Casati, J. Lemke, and M. Vedani, Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting, J. Mater. Sci. Technol., 2016, 32, p 738–744. https://doi.org/10.1016/j.jmst.2016.06.016CrossRef

74.

G. Sander, S. Thomas, V. Cruz, M. Jurg, N. Birbilis, X. Gao, M. Brameld, and C.R. Hutchinson, On the Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting, J. Electrochem. Soc., 2017, 164, p 250–257. https://doi.org/10.1149/2.0551706jesCrossRef

75.

Q. Chao, V. Cruz, S. Thomas, N. Birbilis, P. Collins, A. Taylor, P.D. Hodgson, and D. Fabijanic, On the Enhanced Corrosion Resistance of a Selective Laser Melted Austenitic Stainless Steel, Scr. Mater., 2017, 141, p 94–98. https://doi.org/10.1016/j.scriptamat.2017.07.037CrossRef

76.

A.B. Kale, B.K. Kim, D.I. Kim, E.G. Castle, M. Reece, and S.H. Choi, An Investigation of the Corrosion Behavior of 316L Stainless Steel Fabricated by SLM and SPS Techniques, Mater. Charact., 2020, 163, p 110204. https://doi.org/10.1016/j.matchar.2020.110204CrossRef

77.

D. Kong, X. Ni, C. Dong, X. Lei, L. Zhang, C. Man, J. Yao, X. Cheng, and X. Li, Bio-functional and Anti-corrosive 3D Printing 316L Stainless Steel Fabricated by Selective Laser Melting, Mater. Des., 2018, 152, p 88–101. https://doi.org/10.1016/j.matdes.2018.04.058CrossRef

78.

M. Laleh, A.E. Hughes, W. Xu, I. Gibson, and M.Y. Tan, Unexpected Erosion-Corrosion Behaviour of 316L Stainless Steel Produced by Selective Laser Melting, Corrosion Sci., 2019, 155, p 67–74. https://doi.org/10.1016/j.corsci.2019.04.028CrossRef

79.

K. Lin, X. Li, H. Dong, S. Du, Y. Lu, X. Ji, and D. Gu, Surface Modification of 316 Stainless Steel with Platinum for the Application of Bipolar Plates in High Performance Proton Exchange Membrane Fuel Cells, Int. J. Hydrogen Energy, 2017, 42, p 2338–2348. https://doi.org/10.1016/j.ijhydene.2016.09.220CrossRef

80.

S. Lv, H. Tao, Y. Hong, Y. Zheng, C. Zhou, J. Zheng, and L. Zhang, Surface Treatment and Corrosion Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting, Mater. Res. Express, 2019, 6, p 106518.CrossRef

81.

J. Chen, Y. Yang, C. Song, M. Zhang, S. Wu, and D. Wang, Interfacial Microstructure and Mechanical Properties of 316L/CuSn10 Multi-material Bimetallic Structure Fabricated by Selective Laser Melting, Mater. Sci. Eng. A, 2019, 752, p 75–85. https://doi.org/10.1016/j.msea.2019.02.097CrossRef

82.

Y. Lyu, J. Wang, Y. Wan, and Y. Chen, The Influence of Selective Laser Melting Process Parameters on the Property of TiAlN/TiN Multilayer Coating on the 316L Steel, Coatings, 2019, 9, p 377. https://doi.org/10.3390/coatings9060377CrossRef

83.

A.S. Wu, D.W. Brown, M. Kumar, G.F. Gallegos, and W.E. King, An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel, Metall. Mater. Trans. A, 2014, 45, p 6260–6270. https://doi.org/10.1007/s11661-014-2549-xCrossRef

84.

A. Khorasani, I. Gibson, U.S. Awan, and A. Ghaderi, The Effect of SLM Process Parameters on Density, Hardness, Tensile Strength and Surface Quality of Ti–6Al–4V, Addit. Manuf., 2019, 25, p 176–186. https://doi.org/10.1016/j.addma.2018.09.002CrossRef

85.

J. Sun, Y. Yang, and D. Wang, Parametric Optimization of Selective Laser Melting for Forming Ti6Al4V Samples by Taguchi Method, Opt. Laser Technol., 2013, 49, p 118–124. https://doi.org/10.1016/j.optlastec.2012.12.002CrossRef

86.

P. Edwards and M. Ramulu, Fatigue Performance Evaluation of Selective Laser Melted Ti–6Al–4V, Mater. Sci. Eng. A, 2014, 598, p 327–337. https://doi.org/10.1016/j.msea.2014.01.041CrossRef

87.

P. Tao, H.X. Li, B.Y. Huang, Q.D. Hu, S.L. Gong, and Q.Y. Xu, Tensile Behavior of Ti–6Al–4V Alloy Fabricated by Selective Laser Melting: Effects of Microstructures and As-built Surface Quality, China Found., 2018, 15, p 243–252. https://doi.org/10.1007/s41230-018-8064-8CrossRef

88.

G. Kasperovich and J. Hausmann, Improvement of Fatigue Resistance and Ductility of TiAl6V4 Processed by Selective Laser Melting, J. Mater. Process. Technol., 2015, 220, p 202–214. https://doi.org/10.1016/j.jmatprotec.2015.01.025CrossRef

89.

S. Bagehorn, J. Wehr, and H.J. Maier, Application of Mechanical Surface Finishing Processes for Roughness Reduction and Fatigue Improvement of Additively Manufactured Ti–6Al–4V Parts, Int. J. Fatigue, 2017, 102, p 135–142. https://doi.org/10.1016/j.ijfatigue.2017.05.008CrossRef

90.

X. Lu, X. Lin, M. Chiumenti, M. Cervera, J. Li, L. Ma, L. Wei, Y. Hu, and W. Huang, Finite Element Analysis and Experimental Validation of the Thermo Mechanical Behavior in Laser Solid Forming of Ti–6Al–4V, Addit. Manuf., 2018, 21, p 30–40. https://doi.org/10.1016/j.addma.2018.02.003CrossRef

91.

P. Tao, J. Zhong, H. Li, Q. Hu, S. Gong, and Q. Xu, Microstructure, Mechanical Properties, and Constitutive Models for Ti–6Al–4V Alloy Fabricated by Selective Laser Melting (SLM), Metals, 2019, 9, p 447. https://doi.org/10.3390/met9040447CrossRef

92.

S.S. Al-Bermani, M.L. Blackmore, W. Zhang, and I. Todd, The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti–6Al–4V, Metall. Mater. Trans. A, 2010, 41, p 3422–3434. https://doi.org/10.1007/s11661-010-0397-xCrossRef

93.

H. Gong, K. Rafi, H. Gu, G.D. Janaki Ram, T. Starr, and B. Stucker, Influence of Defects on Mechanical Properties of Ti–6Al–4V Components Produced by Selective Laser Melting and Electron Beam Melting, Mater. Des., 2015, 86, p 545–554. https://doi.org/10.1016/j.matdes.2015.07.147CrossRef

94.

M. Simonelli, Y.Y. Tse, and C. Tuck, Effect of the Build Orientation on the Mechanical Properties and Fracture Modes of SLM Ti–6Al–4V, Mater. Sci. Eng. A, 2014, 616, p 1–11. https://doi.org/10.1016/j.msea.2014.07.086CrossRef

95.

W. Xu, M. Brandt, S. Sun, J. Elambasseril, Q. Liu, K. Latham, K. Xia, and M. Qian, Additive Manufacturing of Strong and Ductile Ti–6Al–4V by Selective Laser Melting via in Situ Martensite Decomposition, Acta Mater., 2015, 85, p 74–84. https://doi.org/10.1016/j.actamat.2014.11.028CrossRef

96.

W. Xu, E.W. Lui, A. Pateras, M. Qian, and M. Brandt, In Situ Tailoring Microstructure in Additively Manufactured Ti–6Al–4V for Superior Mechanical Performance, Acta Mater., 2017, 125, p 390–400. https://doi.org/10.1016/j.actamat.2016.12.027CrossRef

97.

B. He, K. Chang, W. Wu, and C. Zhang, The Formation Mechanism of TiC Reinforcement and Improved Tensile Strength in Additive Manufactured Ti Matrix Nanocomposite, Vacuum, 2017, 143, p 23–27. https://doi.org/10.1016/j.vacuum.2017.05.029CrossRef

98.

H.L. Li, D.C. Jia, Z.H. Yang, X.M. Duan, D.L. Cai, and Y. Zhou, Research Progress on Selective Laser Melting 3D Printing of Titanium Alloys and Titanium Matrix Composites, Mater. Sci. Technol., 2019, 27, p 1–15. https://doi.org/10.11951/j.issn.1005-0299.20180110CrossRef

99.

H. Attar, M. Bönisch, M. Calin, L.-C. Zhang, S. Scudino, and J. Eckert, Selective Laser Melting of in Situ Titanium–Titanium Boride Composites: Processing Microstructure and Mechanical Properties, Acta Mater., 2014, 76, p 13–22. https://doi.org/10.1016/j.actamat.2014.05.022CrossRef

100.

D. Gu, Y.C. Hagedorn, W. Meiners, K. Wissenbach, and R. Poprawe, Nanocrystalline TiC Reinforced Ti Matrix Bulk-form Nanocomposites by Selective Laser Melting (SLM): Densification, Growth Mechanism and Wear Behavior, Compos. Sci. Technol., 2011, 71, p 1612–1620. https://doi.org/10.1016/j.compscitech.2011.07.010CrossRef

101.

D. Gu, G. Meng, C. Li, W. Meiners, and R. Poprawe, Selective Laser Melting of TiC/Ti Bulk Nanocomposites: Influence of Nanoscale Reinforcement, Scr. Mater., 2012, 67, p 185–188. https://doi.org/10.1016/j.scriptamat.2012.04.013CrossRef

102.

X.P. Li, J. Van Humbeeck, and J.P. Kruth, Selective Laser Melting of Weak-textured Commercially Pure Titanium with High Strength and Ductility: A Study from Laser Power Perspective, Mater. Des., 2017, 116, p 352–358. https://doi.org/10.1016/j.matdes.2016.12.019CrossRef

103.

E. Chlebus, B. Kuźnicka, T. Kurzynowski, and B. Dybała, Microstructure and Mechanical Behaviour of Ti–6Al–7Nb Alloy Produced by Selective Laser Melting, Mater. Charact., 2011, 62, p 488–495. https://doi.org/10.1016/j.matchar.2011.03.006CrossRef

104.

H. Schwab, F. Palm, U. Kühn, and J. Eckert, Microstructure and Mechanical Properties of the Near-beta Titanium Alloy Ti-5553 Processed by Selective Laser Melting, Mater. Des., 2016, 105, p 75–80. https://doi.org/10.1016/j.matdes.2016.04.103CrossRef

105.

L. Yan, J. Yu, Y. Zhong, Y. Gu, Y. Ma, W. Li, J. Yan, Y. Ge, J. Yin, Y. Luo, A. Mirzasadeghi, and Y. Yuan, Influence of Scanning on Nano Crystalline β-Ti Alloys Fabricated by Selective Laser Melting and Their Applications in Biomedical Science, J. Nanosci. Nanotechnol., 2020, 20, p 1605–1612. https://doi.org/10.1166/jnn.2020.17340CrossRef

106.

Q. Liu and C. Qiu, Variant Selection of α Precipitation in a Beta Titanium Alloy during Selective Laser Melting and Its Influence on Mechanical Properties, Mater. Sci. Eng. A, 2020, 784, p 139336. https://doi.org/10.1016/j.msea.2020.139336CrossRef

107.

S.E. Haghighi, H. Lu, G. Jian, G. Cao, D. Habibi, and L.C. Zhang, Effect of α″ Martensite on the Microstructure and Mechanical Properties of Beta–type Ti–Fe–Ta Alloys, Mater. Des., 2015, 76, p 47–54. https://doi.org/10.1016/j.matdes.2015.03.028CrossRef

108.

Y.J. Liu, S.J. Li, H.L. Wang, W.T. Hou, Y.L. Hao, R. Yang, T.B. Sercombe, and L.C. Zhang, Microstructure, Defects and Mechanical Behavior of Beta–type Titanium Porous Structures Manufactured by Electron Beam Melting and Selective Laser Melting, Acta Mater., 2016, 113, p 56–67. https://doi.org/10.1016/j.actamat.2016.04.029CrossRef

109.

W. Chen, C. Chen, X. Zi, X. Cheng, X. Zhang, Y.C. Lin, and K. Zhou, Controlling the Microstructure and Mechanical Properties of a Metastable β Titanium Alloy by Selective Laser Melting, Mater. Sci. Eng. A, 2018, 726, p 240–250. https://doi.org/10.1016/j.msea.2018.04.087CrossRef

110.

ASTM, Standard Specification for Titanium–6Aluminum–4Vanadium Alloy Castings for Surgical Implants (UNS R56406): F1108-14[S], ASTM International, West Conshohocken, 2014

111.

ASTM, Standard Specification for Wrought Titanium–6Aluminum–4Vanadium Alloy for Surgical Implant Applications (UNS R56400): F1472-14[S], ASTM International, West Conshohocken, 2014

112.

V. Cain, L. Thijs, J.V. Humbeeck, B.V. Hoorewederd, and R. Knutsena, Crack Propagation and Fracture Toughness of Ti6Al4V Alloy Produced by Selective Laser Melting, Addit. Manuf., 2015, 5, p 68–76. https://doi.org/10.1016/j.addma.2014.12.006CrossRef

113.

M. Simonelli, Y. Tsey, and C. Tuck, Effect of the Build Orientation on the Mechanical Properties and Fracture Modes of SLM Ti–6Al–4V, Mater. Sci. Eng. A, 2014, 616, p 1–11. https://doi.org/10.1016/j.msea.2014.07.086CrossRef

114.

B. Vrancken, L. Thijs, J.-P. Kruth, and J. Van Humbeeck, Heat Treatment of Ti6Al4V Produced by Selective Laser Melting: Microstructure and Mechanical Properties, J. Alloys Compd., 2012, 541, p 177–185. https://doi.org/10.1016/j.jallcom.2012.07.022CrossRef

115.

E. Wycisk, S. Siddique, D. Herzog, F. Walther, and C. Emmelmann, Fatigue Performance of Laser Additive Manufactured Ti–6Al–4V in Very High Cycle Fatigue Regime up to 109 Cycles, Front. Mater, 2015, 2, p 72. https://doi.org/10.3389/fmats.2015.00072CrossRef

116.

Y.J. Liu, Y.S. Zhang, and L.C. Zhang, Transformation-induced Plasticity and High Strength in Beta Titanium Alloy Manufactured by Selective Laser Melting, Materialia, 2019, 6, p 100299. https://doi.org/10.1016/j.mtla.2019.100299CrossRef

117.

A. Zafari and K. Xia, Superior Titanium from Hybridised Microstructures—A new Strategy for Future Alloys, Scr. Mater., 2019, 173, p 61–65. https://doi.org/10.1016/j.scriptamat.2019.07.031CrossRef

118.

D. Zhang, D. Qiu, M.A. Gibson, Y. Zheng, H.L. Fraser, D.H. StJohn, and M.A. Easton, Additive Manufacturing of Ultrafine-grained High-Strength Titanium Alloys, Nature, 2019, 576, p 91–95. https://doi.org/10.1038/s41586-019-1783-1CrossRef

119.

J. Wang, Y. Liu, P. Qin, S.X. Liang, T.B. Sercombe, and L.C. Zhang, Selective Laser Melting of Ti–35Nb Composite from Elemental Powder Mixture: Microstructure, Mechanical Behavior and Corrosion Behavior, Mater. Sci. Eng. A, 2019, 760, p 214–224. https://doi.org/10.1016/j.msea.2019.06.001CrossRef

120.

N. Dai, L.C. Zhang, J. Zhang, X. Zhang, Q. Ni, Y. Chen, M. Wu, and C. Yang, Distinction in Corrosion Resistance of Selective Laser Melted Ti–6Al–4V Alloy on Different Planes, Corros. Sci., 2016, 111, p 703–710. https://doi.org/10.1016/j.corsci.2016.06.009CrossRef

121.

R. Wauthle, B. Vrancken, B. Beynaerts, K. Jorissen, J. Schrooten, J.P. Kruth, and J.V. Humbeeck, Effects of Build Orientation and Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser Melted Ti6Al4V Lattice Structures, Addit. Manuf., 2015, 5, p 77–84. https://doi.org/10.1016/j.addma.2014.12.008CrossRef

122.

P. Qin, Y. Liu, T.B. Sercombe, Y. Li, C. Zhang, C. Cao, H. Sun, and L. Zhang, Improved Corrosion Resistance on Selective Laser Melting Produced Ti–5Cu Alloy after Heat Treatment, ACS Biomater. Sci. Eng., 2018, 4, p 2633–2642. https://doi.org/10.1021/acsbiomaterials.8b00319CrossRef

123.

D. Buchbinder, W. Meiners, K. Wissenbach, and R. Poprawe, Selective Laser Melting of Aluminum Die-cast Alloy—Correlations between Process Parameters, Solidification Conditions, and Resulting Mechanical Properties, J. Laser Appl., 2015, 27, p S29205. https://doi.org/10.2351/1.4906389CrossRef

124.

K. Kempen, L. Thijs, E. Yasa, M. Badrossamay, W. Verheecke, and J.P. Kruth, Process Optimization and Microstructural Analysis for Selective Laser Melting of AlSi10Mg, in 22nd Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference, 2011, 22, p 484–495. https://www.researchgate.net/publication/262698754.

125.

D. Buchbinder, H. Schleifenbaum, S. Heidrich, W. Meiners, and J. Bültmann, High Power Selective Laser Melting (HP SLM) of Aluminum Parts, Phys. Procedia, 2011, 12, p 271–278. https://doi.org/10.1016/j.phpro.2011.03.035CrossRef

126.

L. Thijs, K. Kempen, J.-P. Kruth, and J. Van Humbeeck, Fine-structured Aluminium Products with Controllable Texture by Selective Laser Melting of Pre-alloyed AlSi10Mg Powder, Acta Mater., 2013, 61, p 1809–1819. https://doi.org/10.1016/j.actamat.2012.11.052CrossRef

127.

E.O. Olakanmi, Selective Laser Sintering/Melting (SLS/SLM) of Pure Al, Al–Mg, and Al–Si Powders: Effect of Processing Conditions and Powder Properties, J. Mater. Process. Technol., 2013, 213, p 1387–1405. https://doi.org/10.1016/j.jmatprotec.2013.03.009CrossRef

128.

X.P. Li, G. Ji, Z. Chen, A. Addad, Y. Wu, H.W. Wang, J. Vleugels, J. Van Humbeeck, and J.P. Kruth, Selective Laser Melting of Nano-TiB₂ Decorated AlSi10Mg Alloy with High Fracture Strength and Ductility, Acta Mater., 2017, 129, p 183–193. https://doi.org/10.1016/j.actamat.2017.02.062CrossRef

129.

J. Fiocchi, A. Tuissi, P. Bassani, and C.A. Biffi, Low Temperature Annealing Dedicated to AlSi10Mg Selective Laser Melting Products, J. Alloys Compd., 2017, 695, p 3402–3409. https://doi.org/10.1016/j.jallcom.2016.12.019CrossRef

130.

S.D. McDonald, K. Nogita, and A.K. Dahle, Eutectic Nucleation in Al–Si Alloys, Acta Mater., 2004, 52, p 4273–4280. https://doi.org/10.1016/j.actamat.2004.05.043CrossRef

131.

L. Wang, G. Zhang, L. Zhu, and H. Wang, Biocrust Wetting Induced Change in Soil Surface Roughness as Influenced by Biocrust Type, Cover. Wet. Patterns Geoderma, 2017, 306, p 1–9. https://doi.org/10.1016/j.geoderma.2017.06.032CrossRef

132.

E. Brandl, U. Heckenberger, V. Holzinger, and D. Buchbinder, Additive Manufactured AlSi10Mg Samples Using Selective Laser Melting (SLM): Microstructure, High Cycle Fatigue, and Fracture Behavior, Mater. Des., 2012, 34, p 159–169. https://doi.org/10.1016/j.matdes.2011.07.067CrossRef

133.

W. Li, S. Li, J. Liu, A. Zhang, Y. Zhou, Q. Wei, and Y. Shi, Effect of Heat Treatment on AlSi10Mg Alloy Fabricated by Selective Laser Melting: Microstructure Evolution, Mechanical Properties and Fracture Mechanism, Mater. Sci. Eng. A, 2016, 663, p 116–125. https://doi.org/10.1016/j.msea.2016.03.088CrossRef

134.

M. Fousová, D. Dvorský, A. Michalcová, and D. Vojtěch, Changes in the Microstructure and Mechanical Properties of Additively Manufactured AlSi10Mg Alloy after Exposure to Elevated Temperatures, Mater. Charact., 2018, 137, p 119–126. https://doi.org/10.1016/j.matchar.2018.01.028CrossRef

135.

K.G. Prashanth, S. Scudino, H.J. Klauss, K.B. Surreddi, L. Löber, Z. Wang, and J. Eckert, Microstructure and Mechanical Properties of Al–12Si Produced by Selective Laser Melting: Effect of Heat Treatment, Mater. Sci. Technol., 2014, 590, p 153–160. https://doi.org/10.1016/j.msea.2013.10.023CrossRef

136.

Y. Bai, Y. Yang, Z. Xiao, M. Zhang, and D. Wang, Process Optimization and Mechanical Property Evolution of AlSiMg0.75 by Selective Laser Melting, Mater. Des., 2018, 140, p 257–266. https://doi.org/10.1016/j.matdes.2017.11.045CrossRef

137.

T. Kimura and T. Nakamoto, Microstructures and Mechanical Properties of A356 (AlSi7Mg0.3) Aluminum Alloy Fabricated by Selective Laser Melting, Mater. Des., 2016, 89, p 1294–1301. https://doi.org/10.1016/j.matdes.2015.10.065CrossRef

138.

K.G. Prashanth, S. Scudino, and J. Eckert, Defining the Tensile Properties of Al–12Si Parts Produced by Selective Laser Melting, Acta Mater., 2017, 126, p 25–35. https://doi.org/10.1016/j.actamat.2016.12.044CrossRef

139.

D. Gu, C. Ma, M. Xia, D. Dai, and Q. Shi, A Multiscale Understanding of the Thermodynamic and Kinetic Mechanisms of Laser Additive Manufacturing, Engineering, 2017, 3, p 675–684. https://doi.org/10.1016/J.ENG.2017.05.011CrossRef

140.

M. Tang and P.C. Pistorius, Oxides, Porosity and Fatigue Performance of AlSi10Mg Parts Produced by Selective Laser Melting, Int. J. Fatigue, 2017, 94, p 192–201. https://doi.org/10.1016/j.ijfatigue.2016.06.002CrossRef

141.

H. Tan, D. Hao, K. Al-Hamdani, F. Zhang, Z. Xu, and A.T. Clare, Direct Metal Deposition of TiB2/AlSi10Mg Composites Using Satellited Powders, Mater. Lett., 2018, 214, p 123–126. https://doi.org/10.1016/j.matlet.2017.11.121CrossRef

142.

H. Wang and D. Gu, Nanometric TiC Reinforced AlSi10Mg Nanocomposites: Powder Preparation by High-energy Ball Milling and Consolidation by Selective Laser Melting, J. Compos. Mater., 2014, 49, p 1639–1651. https://doi.org/10.1177/0021998314538870CrossRef

143.

G. Zhang, C. Chen, X. Wang, P. Wang, X. Zhang, X. Gan, and K. Zhou, Additive Manufacturing of Fine-structured Copper Alloy by Selective Laser Melting of Pre-Alloyed Cu–15Ni–8Sn Powder, Int. J. Adv. Manuf. Technol., 2018, 96, p 4223–4230. https://doi.org/10.1007/s00170-018-1891-3CrossRef

144.

S. Zhang, H. Zhu, Z. Hu, X. Zeng, and F. Zhong, Selective Laser Melting of Cu–10Zn Alloy Powder Using High Laser Power, Powder Technol., 2018, 342, p 613–620. https://doi.org/10.1016/j.powtec.2018.10.002CrossRef

145.

Z. Mao, D.Z. Zhang, J. Jiang, G. Fu, and P. Zhang, Processing Optimisation, Mechanical Properties and Microstructural Evolution During Selective Laser Melting of Cu–15Sn High-tin Bronze, Mater. Sci. Eng. A, 2018, 721, p 125–134. https://doi.org/10.1016/j.msea.2018.02.051CrossRef

146.

P.V. Anthony, W.C. Austin, P. Gregory, B. Martin, W. Masashi, and Z.M. Wojciech, Mechanical Properties and Microstructural Characterization of Cu–4.3 Pct Sn Fabricated by Selective Laser Melting, Metall. Mater. Trans. A, 2017, 48, p 178–187. https://doi.org/10.1007/s11661-016-3779-xCrossRef

147.

S. Uchida, T. Kimura, T. Nakamoto, T. Ozaki, T. Miki, M. Takemura, Y. Oka, and R. Tsubota, Microstructures and Electrical and Mechanical Properties of Cu–Cr Alloys Fabricated by Selective Laser Melting, Mater. Des., 2019, 175, p 107815. https://doi.org/10.1016/j.matdes.2019.107815CrossRef

148.

D. Palousek, M. Kocica, L. Pantelejev, L. Klakurkova, L. Celko, D. Koutny, and J. Kaiser, SLM Process Parameters Development of Cu-Alloy Cu7.2Ni1.8Si1Cr, Rapid Prototyping J., 2019, 25, p 266–276. https://doi.org/10.1108/RPJ-06-2017-0116CrossRef

149.

A. Popovich, V. Sufiiarov, I. Polozov, E. Borisov, D. Masaylo, and A. Orlov, Microstructure and Mechanical Properties of Additive Manufactured Copper Alloy, Mater. Lett., 2016, 179, p 38–41. https://doi.org/10.1016/j.matlet.2016.05.064CrossRef

150.

A. Leon, A. Shirizly, and E. Aghion, Corrosion Behavior of AlSi10Mg Alloy Produced by Additive Manufacturing (AM) vs. Its Counterpart Gravity Cast Alloy, Metals, 2016, 6, p 148. https://doi.org/10.3390/met6070148CrossRef

151.

X. Xing, X. Duan, T. Jiang, J. Wang, and F. Jiang, Ultrasonic Peening Treatment Used to Improve Stress Corrosion Resistance of AlSi10Mg Components Fabricated Using Selective Laser Melting, Metals, 2019, 9, p 103. https://doi.org/10.3390/met9010103CrossRef

152.

Y. Yang, Y. Chen, J. Zhang, X. Gu, P. Qin, N. Dai, X. Li, J.P. Kruth, and L.C. Zhang, Improved Corrosion Behavior of Ultrafine-grained Eutectic Al–12Si Alloy Produced by Selective Laser Melting, Mater. Des., 2018, 146, p 239–248. https://doi.org/10.1016/j.matdes.2018.03.025CrossRef

153.

S. Scudino, C. Unterdörfer, K.G. Prashanth, H. Attar, N. Ellendt, V. Uhlenwinkel, and J. Eckert, Additive Manufacturing of Cu–10Sn Bronze, Mater. Lett., 2015, 156, p 202–204. https://doi.org/10.1016/j.matlet.2015.05.076CrossRef

154.

T.Q. Tran, A. Chinnappan, J. Lee, H.L. Nguyen, L.T. Tran, G. Wang, V.V. Kumar, W.A.D.M. Jayathilaka, D. Ji, M. Doddamani, and S. Ramakrishna, 3D Printing of Highly Pure Copper, Metals, 2019, 9, p 756. https://doi.org/10.3390/met9070756CrossRef

155.

S.D. Jadhav, SLM of Copper and Copper Based Alloys, Arenberg Youngsters Seminar 16, Date: 2018/12/12–2018/12/12, Auditorium Arenberg Castle, KU Leuven, 2018

156.

T. Trosch, J. Strößner, R. Völkl, and U. Glatzel, Microstructure and Mechanical Properties of Selective Laser Melted Inconel 718 Compared to Forging and Casting, Mater. Lett., 2016, 164, p 428–431. https://doi.org/10.1016/j.matlet.2015.10.136CrossRef

157.

S. Li, Q. Wei, Y. Shi, Z. Zhu, and D. Zhang, Microstructure Characteristics of Inconel 625 Superalloy Manufactured by Selective Laser Melting, J. Mater. Sci. Technol., 2015, 31, p 946–952. https://doi.org/10.1016/j.jmst.2014.09.020CrossRef

158.

J. Strößner, M. Terock, and U. Glatzel, Mechanical and Microstructural Investigation of Nickel-Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM), Adv. Eng. Mater., 2015, 17, p 1099–1105. https://doi.org/10.1002/adem.201500158CrossRef

159.

M. Pröbstle, S. Neumeier, J. Hopfenmüller, L.P. Freund, T. Niendorf, D. Schwarze, and M. Göken, Superior Creep Strength of a Nickel-based Superalloy Produced by Selective Laser Melting, Mater. Sci. Eng. A, 2016, 674, p 299–307. https://doi.org/10.1016/j.msea.2016.07.061CrossRef

160.

H. Zhang, D. Gu, L. Xi, H. Zhang, M. Xi, and C. Ma, Anisotropic Corrosion Resistance of TiC Reinforced Ni-based Composites Fabricated by Selective Laser Melting, J. Mater. Sci. Technol., 2019, 35, p 1128–1136.CrossRef

161.

C. Pei, D. Shi, H. Yuan, and H. Li, Assessment of Mechanical Properties and Fatigue Performance of a Selective Laser Melted Nickel-base Superalloy Inconel 718, Mater. Sci. Eng. A, 2019, 759, p 278–287.CrossRef

162.

X. Yao, S.K. Moon, B.Y. Lee, and G. Bi, Effects of Heat Treatment on Microstructures and Tensile Properties of IN718/TiC Nanocomposite Fabricated by Selective Laser Melting, Int. J. Precis. Eng. Manuf., 2017, 18, p 1693–1701. https://doi.org/10.1007/s12541-017-0197-yCrossRef

163.

H. Zhang, D. Gu, C. Ma, M. Guo, J. Yang, and R. Wang, Effect of Post Heat Treatment on Microstructure and Mechanical Properties of Ni-based Composites by Selective Laser Melting, Mater. Sci. Technol., 2019, 765, p 138294. https://doi.org/10.1016/j.msea.2019.138294CrossRef

164.

E. Chlebus, K. Gruber, B. Kuźnicka, J. Kurzac, and T. Kurzynowski, Effect of Heat Treatment on the Microstructure and Mechanical Properties of Inconel 718 Processed by Selective Laser Melting, Mater. Sci. Eng. A, 2015, 639, p 647–655. https://doi.org/10.1016/j.msea.2015.05.035CrossRef

165.

R. Wang, G. Zhu, C. Yang, W. Wang, and D. W, A. Dong, D. Shu, L. Zhang, B. Sun, , Nano-size Carbide-reinforced Ni Matrix Composite Prepared by Selective Laser Melting, Nano Mater. Sci., 2019, https://doi.org/10.1016/j.nanoms.2019.11.003CrossRef

166.

X. Ni, D. Kong, L. Zhang, C. Dong, J. Song, and W. Wu, Effect of Process Parameters on the Mechanical Properties of Hastelloy X Alloy Fabricated by Selective Laser Melting, J. Mater. Eng. Perform., 2019, 28, p 5533–5540. https://doi.org/10.1007/s11665-019-04275-wCrossRef

167.

O.E. Ozbulut, S. Hurlebaus, and R. Desroches, Seismic Response Control Using Shape Memory Alloys: A Review, J. Intell. Mater. Syst. Struct., 2011, 22, p 1531–1549. https://doi.org/10.1177/1045389X11411220CrossRef

168.

M. Elahinia, N.S. Moghaddama, A. Amerinatanzi, S. Saedi, G.P. Toker, H. Karaca, G.S. Bigelow, and O. Benafan, Additive Manufacturing of NiTiHf High Temperature Shape Memory Alloy, Scr. Mater., 2018, 145, p 90–94. https://doi.org/10.1016/j.scriptamat.2017.10.016CrossRef

169.

H. Meier, C. Haberland, J. Frenzel, and R. Zarnetta, Selective Laser Melting of NiTi Shape Memory Components, Innov. Dev. Des. Manufa. Adv. Res. Virtual Rapid Prototyping, 2009, https://doi.org/10.1201/9780203859476.ch35CrossRef

170.

M.H. Elahinia, M. Hashemi, M. Tabesh, and S.B. Bhaduri, Manufacturing and Processing of NiTi Implants: A Review, Prog. Mater. Sci., 2012, 57, p 911–946. https://doi.org/10.1016/j.pmatsci.2011.11.001CrossRef

171.

S. Dadbakhsh, M. Speirs, J.P. Kruth, J. Schrooten, J. Luyten, and J. Van Humbeeck, Effect of SLM Parameters on Transformation Temperatures of Shape Memory Nickel Titanium Parts, Adv. Eng. Mater., 2014, 16, p 1140–1146. https://doi.org/10.1002/adem.201300558CrossRef

172.

T. Bormann, R. Schumacher, B. Müller, M. Mertmann, and M. Wild, Tailoring Selective Laser Melting Process Parameters for NiTi Implants, J. Mater. Eng. Perform., 2012, 21, p 2519–2524. https://doi.org/10.1007/s11665-012-0318-9CrossRef

173.

Z.X. Khoo, J. An, C.K. Chua, Y.F. Shen, C.N. Kuo, and Y. Liu, Effect of Heat Treatment on Repetitively Scanned SLM NiTi Shape Memory Alloy, Materials, 2019, 12, p 77. https://doi.org/10.3390/ma12010077CrossRef

174.

Y. Liu, Y. Liu, and J.V. Humbeeck, Two-way Shape Memory Effect Developed by Martensite Deformation in NiTi, Acta Mater., 1999, 47, p 199–209. https://doi.org/10.1016/S1359-6454(98)00325-5CrossRef

175.

S. Dadbakhsh, B. Vrancken, J.P. Kruth, J. Luyten, and J. Van Humbeeck, Texture and Anisotropy in Selective Laser Melting of NiTi Alloy, Mater. Sci. Eng. A, 2016, 650, p 225–232. https://doi.org/10.1016/j.msea.2015.10.032CrossRef

176.

S. Dadbakhsh, M. Speirs, J. Van Humbeeck, and J.P. Kruth, Laser Additive Manufacturing of Bulk and Porous Shape-memory NiTi Alloys: From Processes to Potential Biomedical Applications, MRS Bull., 2016, 41, p 765–774. https://doi.org/10.1557/mrs.2016.209CrossRef

177.

S. Bernard, V.K. Balla, S. Bose, and A. Bandyopadhyay, Compression Fatigue Behavior of Laser Processed Porous NiTi Alloy, J. Mech. Behav. Biomed. Mater., 2012, 13, p 62–68. https://doi.org/10.1016/j.jmbbm.2012.04.010CrossRef

178.

J. Ma, B. Franco, G. Tapia, K. Karayagiz, L. Johnson, J. Liu, and A. Elwany, Spatial Control of Functional Response in 4D-printed Active Metallic Structures, Sci. Rep., 2017, 7, p 46707. https://doi.org/10.1038/srep46707CrossRef

179.

K.K. Alaneme, A.A. Sulaimon, and P.A. Olubambi, Mechanical and Corrosion Behaviour of Iron Modified Cu–Zn–Al Alloys, Acta Metall. Slov., 2013, 19, p 292–301. https://doi.org/10.12776/ams.v19i4.184CrossRef

180.

P. Gargarella, C.S. Kiminami, E.M. Mazzer, R.D. Cava, L.A. Basilio, C. Bolfarini, W.J. Botta, J. Eckert, T. Gustmann, and S. Pauly, Phase Formation, Thermal Stability and Mechanical Properties of a Cu–Al–Ni–Mn Shape Memory Alloy Prepared by Selective Laser Melting, Mater. Res., 2015, 18, p 35–38. https://doi.org/10.1590/1516-1439.338914CrossRef

181.

T. Gustmann, A. Neves, U. Kühn, P. Gargarella, C.S. Kiminami, C. Bolfarini, J. Eckert, and S. Pauly, Influence of Processing Parameters on the Fabrication of a Cu–Al–Ni–Mn Shape-memory Alloy by Selective Laser Melting, Addit. Manuf., 2016, 11, p 23–31. https://doi.org/10.1016/j.addma.2016.04.003CrossRef

182.

T. Gustmann, J.M. Dos Santos, P. Gargarella, U. Kühn, J. Van Humbeeck, and S. Pauly, Properties of Cu-based Shape-memory Alloys Prepared by Selective Laser Melting, Shape Memory Superelasticity, 2017, 3, p 24–36. https://doi.org/10.1007/s40830-016-0088-6CrossRef

183.

T. Gustmann, H. Schwab, U. Kühn, and S. Pauly, Selective Laser Remelting of an Additively Manufactured Cu–Al–Ni–Mn Shape-memory Alloy, Mater. Des., 2018, 153, p 129–138. https://doi.org/10.1016/j.matdes.2018.05.010CrossRef

184.

Y. Yang, J.B. Zhan, B. Li, J.X. Lina, J.J. Gao, Z.Q. Zhang, L. Ren, P. Castany, and T. Gloriant, Laser Beam Energy Dependence of Martensitic Transformation in SLM Fabricated NiTi Shape Memory Alloy, Materialia, 2019, 6, p 100305. https://doi.org/10.1016/j.mtla.2019.100305CrossRef

185.

M.D. Hayat, G. Chen, N. Liu, S. Khan, H.P. Tang, and P. Cao, Physical and Tensile Properties of NiTi Alloy by Selective Electron Beam Melting, Key Eng. Mater., 2018, 770, p 148–154. https://doi.org/10.4028/www.scientific.net/KEM.770.148CrossRef

186.

H.Z. Lu, C. Yang, X. Luo, H.W. Ma, B. Song, Y.Y. Li, and L.C. Zhang, Ultrahigh-performance TiNi Shape Memory Alloy by 4D printing, Mater. Sci. Eng. A, 2019, 763, p 138166. https://doi.org/10.1016/j.msea.2019.138166CrossRef

187.

N.S. Moghaddam, S.E. Saghaian, A. Amerinatanzi, H. Ibrahim, P. Li, G.P. Toker, H.E. Karaca, and M. Elahinia, Anisotropic Tensile and Actuation Properties of NiTi Fabricated with Selective Laser Melting, Mater. Sci. Eng. A, 2018, 724, p 220–230. https://doi.org/10.1016/j.msea.2018.03.072CrossRef

188.

Y. Brif, M. Thomas, and I. Todd, The Use of High-entropy Alloys in Additive Manufacturing, Scr. Mater., 2015, 99, p 93–96. https://doi.org/10.1016/j.scriptamat.2014.1CrossRef

189.

F. Tian, L.K. Varga, N. Chen, J. Shen, and L. Vitos, Empirical Design of Single Phase High-entropy Alloys with High Hardness, Intermetallics, 2015, 58, p 1–6. https://doi.org/10.1016/j.intermet.2014.10.010CrossRef

190.

P.D. Niu, R.D. Li, T.C. Yuan, S.Y. Zhu, C. Chen, M.B. Wang, and L. Huang, Microstructures and Properties of an Equimolar AlCoCrFeNi High Entropy Alloy Printed by Selective Laser Melting, Intermetallics, 2019, 104, p 24–32. https://doi.org/10.1016/j.intermet.2018.10.018CrossRef

191.

J. Guo, M. Goh, Z. Zhu, X. Lee, M. Ling, S. Nai, and J. Wei, On the Machining of Selective Laser Melting CoCrFeMnNi High-entropy Alloy, Mater. Des., 2018, 153, p 211–220. https://doi.org/10.1016/j.matdes.2018.05.012CrossRef

192.

Z.P. Lu, H. Wang, M.W. Chen, I. Baker, J.W. Yeh, C.T. Liu, and T.G. Nieh, An Assessment on the Future Development of High-entropy Alloys: Summary from a Recent Work-shop, Intermetallics, 2015, 66, p 67–76. https://doi.org/10.1016/j.intermet.2015.06.021CrossRef

193.

S. Uporov, V. Bykov, S. Pryanichnikov, A. Shubin, and N. Uporova, Effect of Synthesis Route on Structure and Properties of AlCoCrFeNi High-entropy Alloy, Intermetallics, 2017, 83, p 1–8. https://doi.org/10.1016/j.intermet.2016.12.003CrossRef

194.

J.M. Park, J. Choe, J.G. Kim, J.W. Bae, J. Moon, S. Yang, K.T. Kim, J.H. Yu, and H.S. Kim, Superior Tensile Properties of 1% C–CoCrFeMnNi High-entropy Alloy Additively Manufactured by Selective Laser Melting, Mater. Res. Lett., 2020, 8, p 1–7. https://doi.org/10.1080/21663831.2019.1638844CrossRef

195.

J. Joseph, T. Jarvis, X. Wu, N. Stanford, P. Hodgson, and D.M. Fabijanic, Comparative Study of the Microstructures and Mechanical Properties of Direct Laser Fabricated and Arc-melted AlxCoCrFeNi High Entropy Alloys, Mater. Sci. Eng. A, 2015, 633, p 184–193. https://doi.org/10.1016/j.msea.2015.02.072CrossRef

196.

K. Sun, W. Peng, L. Yang, and L. Fang, Effect of SLM Processing Parameters on Microstructures and Mechanical Properties of Al0.5CoCrFeNi High Entropy Alloys, Metals, 2020, 10, p 292. https://doi.org/10.3390/met10020292CrossRef

197.

J. Li, Microstructure and Mechanical Behavior of AlCoCuFeNi High-entropy Alloy Fabricated by Selective Laser Melting, Beijing, in Solid Freeform Fabrication 2017: Proceedings of the 28th Annual International, 2017, p 729–730.

198.

R. Zhou, Y. Liu, C. Zhou, S. Li, W. Wu, M. Song, B. Liu, X. Liang, and P.K. Liaw, Microstructures and Mechanical Properties of C-containing FeCoCrNi High-entropy Alloy Fabricated by Selective Laser Melting, Intermetallics, 2018, 94, p 165–171. https://doi.org/10.1016/j.intermet.2018.01.002CrossRef

199.

J. Chen, Z. Yao, X. Wang, Y. Lu, X. Wang, Y. Liu, and X. Fan, Effect of C Content on Microstructure and Tensile Properties of As-cast CoCrFeMnNi High Entropy Alloy, Mater. Chem. Phys., 2017, 210, p 1–10. https://doi.org/10.1016/j.matchemphys.2017.08.011CrossRef

200.

N.D. Stepanov, N.Y. Yurchenko, M.A. Tikhonovsky, and G.A. Salishchev, Effect of Carbon Content and Annealing on Structure and Hardness of the CoCrFeNiMn-based High Entropy Alloys, J. Alloys Compd., 2016, 687, p 59–71. https://doi.org/10.1016/j.jallcom.2016.06.103CrossRef

201.

T. Fujieda, M. Chen, H. Shiratori, K. Kuwabara, K. Yamanaka, Y. Koizumi, A. Chiba, and S. Watanabe, Mechanical and Corrosion Properties of CoCrFeNiTi-based High-entropy Alloy Additive Manufactured Using Selective Laser Melting, Addit. Manuf., 2019, 25, p 412–420. https://doi.org/10.1016/j.addma.2018.10.023CrossRef

202.

H. Zhang, Y. Zhao, S. Huang, S. Zhu, F. Wang, and D. Li, Manufacturing and Analysis of High-performance Refractory High-entropy Alloy via Selective Laser Melting (SLM), Materials, 2019, 12, p 720. https://doi.org/10.3390/ma12050720CrossRef

Titel: Characteristics of Metal Specimens Formed by Selective Laser Melting: A State-of-the-Art Review
verfasst von: Dongju Chen
Peng Wang
Ri Pan
Chunqing Zha
Jinwei Fan
Dong Liang
You Zhao
Publikationsdatum: 30.11.2020
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 10/2021
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-05323-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 10/2021

Influence of the Heat Input on the Dendritic Solidification Structure and the Mechanical Properties of 2.25Cr-1Mo-0.25V Submerged-Arc Weld Metal

Effects of Carbon Source on Ablation Property of C/C–ZrC–SiC Composites and SiC Coating under Plasma Flame

In Vitro Study on Cytocompatibility of Mg Wire/Poly(Lactic Acid) Composite Rods

Correction to: Electrochemical-Based Surface Enhancement of Additively Manufactured Ti-6Al-4V Complex Structures

Under-Deposit Corrosion of Carbon Steel Beneath Full Coverage of CaCO3 Deposit Layer under Different Atmospheres

Influence of Interwire Distance and Arc Length on Welding Process and Defect Formation Mechanism in Double-Wire Pulsed Narrow-Gap Gas Metal Arc Welding

Premium Partner

Marktübersichten