nach oben

Journal of Materials Science: Materials in Electronics

Erschienen in:

12.06.2021

Chemical sintering of Ag nanoparticle conductive inks at room temperature for printable electronics

verfasst von: Bethel Faith Y. Rezaga, Mary Donnabelle L. Balela

Erschienen in: Journal of Materials Science: Materials in Electronics | Ausgabe 13/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Silver (Ag) nanoparticles with a mean diameter of about 24.3 nm were synthesized by electroless deposition in an aqueous solution using PAA-Na and ascorbic acid as protective and reducing agents, respectively. The Ag nanoparticles were utilized as conductive ink and sintered at room temperature using different halide solutions (NaCl, NaBr, NaI, LiCl, KCl) at varying concentrations. A significant increase in particle size of about 174–990% was observed after sintering depending on the type of halide solution used. This also led to an increase in the electrical conductivity of the printed Ag pattern. Halide solutions with smaller ionic sizes generally promote the fusing of Ag nanoparticles, which results in larger Ag particles (NaCl > NaBr > NaI) and higher electrical conductivity. The use of an ionic stabilizer (PAA-Na salt) is more effective as a capping agent for Ag nanoparticles. Sintering is also more significant in samples stabilized by PAA-Na compared to those with PAA only.

Vorheriger Artikel A microconductometric ethanol sensor prepared through encapsulation of alcohol dehydrogenase in chitosan: application to the determination of alcoholic content in headspace above beverages

Nächster Artikel Synthesis of the hexaferrite semiconductor SrFe12O19 and its application in the photodegradation of Basic Red 46

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

P. Sarobol et al., Additive manufacturing of hybrid circuits. Annu. Rev. Mater. Res. 46, 41–62 (2016). https://doi.org/10.1146/annurev-matsci-070115-031632CrossRef

A.J. Kell et al., Versatile molecular silver ink platform for printed flexible electronics. ACS Appl. Mater. Interfaces 9(20), 17226–17237 (2017). https://doi.org/10.1021/acsami.7b02573CrossRef

S.H. Ko, H. Pan, C.P. Grigoropoulos, C.K. Luscombe, J.M.J. Fráchet, D. Poulikakos, Air stable high resolution organic transistors by selective laser sintering of ink-jet printed metal nanoparticles. Appl. Phys. Lett. 90(14), 141103 (2007). https://doi.org/10.1063/1.2719162CrossRef

D.A. Kislov, Effect of plasmonic silver nanoparticles on the photovoltaic properties of graetzel solar cells. Phys. Procedia 73, 114–120 (2015). https://doi.org/10.1016/j.phpro.2015.09.130CrossRef

A. Ciesielski, K.M. Czajkowski, D. Switlik, Silver nanoparticles in organic photovoltaics: finite size effects and optimal concentration. Sol. Energy 184, 477–488 (2019). https://doi.org/10.1016/j.solener.2019.04.015CrossRef

F.M. Wolf, J. Perelaer, S. Stumpf, D. Bollen, F. Kriebel, U.S. Schubert, Rapid low-pressure plasma sintering of inkjet-printed silver nanoparticles for RFID antennas. J. Mater. Res. 28(9), 1254–1261 (2013). https://doi.org/10.1557/jmr.2013.73CrossRef

J.F. Salmerón et al., Properties and printability of inkjet and screen-printed silver patterns for RFID antennas. J. Electron. Mater. 43(2), 604–617 (2014). https://doi.org/10.1007/s11664-013-2893-4CrossRef

T.R. Allington, V. Johnson, Membrane touch switches: thick-film materials systems and processing options. IEEE Trans. Compon. Hybrids Manuf. Technol. 3(4), 518–524 (1980). https://doi.org/10.1109/TCHMT.1980.1135649CrossRef

J. Kim, J.H. Jong, W.S. Kim, Repeatedly bendable paper touch pad via direct stamping of silver nanoink with pressure-induced low-temperature annealing. IEEE Trans. Nanotechnol. 12(6), 1139–1143 (2013). https://doi.org/10.1109/TNANO.2013.2281326CrossRef

10.

A. Russo, B.Y. Ahn, J.J. Adams, E.B. Duoss, J.T. Bernhard, J.A. Lewis, Pen-on-paper flexible electronics. Adv. Mater. 23(30), 3426–3430 (2011). https://doi.org/10.1002/adma.201101328CrossRef

11.

S. Magdassi, M. Grouchko, O. Berezin, A. Kamyshny, Triggering the sintering of silver nanoparticles at room temperature. ACS Nano 4(4), 1943–1948 (2010). https://doi.org/10.1021/nn901868tCrossRef

12.

M. Layani, M. Grouchko, S. Shemesh, S. Magdassi, Conductive patterns on plastic substrates by sequential inkjet printing of silver nanoparticles and electrolyte sintering solutions. J. Mater. Chem. 22(29), 14349–14352 (2012). https://doi.org/10.1039/c2jm32789aCrossRef

13.

E.M. Datu, M.D.L. Balela, In situ electrochemical study of copper nanoparticles stabilized with food grade gelatin. Key Eng. Mater. 705, 163–167 (2016)CrossRef

14.

M.D.L. Balela, K.L.S. Amores, Formation of highly antimicrobial copper nanoparticles by electroless deposition in water. Sci. Diliman 27(2), 10–20 (2015)

15.

M. Tan, L. de Jesus, K.L. Amores, E. Datu, D. Balela, Electroless deposition of copper nanostructures in aqueous solution. Adv. Mater. Res. 1043, 114–118 (2014)CrossRef

16.

W. Cui, W. Lu, Y. Zhang, G. Lin, T. Wei, L. Jiang, Gold nanoparticle ink suitable for electric-conductive pattern fabrication using in ink-jet printing technology. Colloids Surfaces A Physicochem. Eng. Asp. 358(1–3), 35–41 (2010). https://doi.org/10.1016/j.colsurfa.2010.01.023CrossRef

17.

K. Saha, S.S. Agasti, C. Kim, X. Li, V.M. Rotello, Gold nanoparticles in chemical and biological sensing. Chem. Rev. 112(5), 2739–2779 (2012). https://doi.org/10.1021/cr2001178CrossRef

18.

D.C. Corsino, M.D.L. Balela, Room temperature sintering of printer silver nanoparticle conductive ink. IOP Conf. Ser. Mater. Sci. Eng. 264(1), 012020 (2017). https://doi.org/10.1088/1757-899X/264/1/012020CrossRef

19.

N. De. Guzman, M.D. Balela, CuCl2-mediated synthesis of silver nanowires for flexible transparent conducting films. MATEC Web Conf. 27, 3–5 (2015). https://doi.org/10.1051/matecconf/20152703007CrossRef

20.

J.S. Kang, J. Ryu, H.S. Kim, H.T. Hahn, Sintering of inkjet-printed silver nanoparticles at room temperature using intense pulsed light. J. Electron. Mater. 40(11), 2268–2277 (2011). https://doi.org/10.1007/s11664-011-1711-0CrossRef

21.

N. De. Guzman, M.D.L. Balela, Growth of ultralong Ag nanowires by electroless deposition in hot ethylene glycol for flexible transparent conducting electrodes. J. Nanomater. (2017). https://doi.org/10.1155/2017/7896094CrossRef

22.

T.H.J. Van Osch, J. Perelaer, A.W.M. De. Laat, U.S. Schubert, Inkjet printing of narrow conductive tracks on untreated polymeric substrates. Adv. Mater. 20(2), 343–345 (2008). https://doi.org/10.1002/adma.200701876CrossRef

23.

S. Sivaramakrishnan, P.J. Chia, Y.C. Yeo, L.L. Chua, P.K.H. Ho, Controlled insulator-to-metal transformation in printable polymer composites with nanometal clusters. Nat. Mater. 6(2), 149–155 (2007). https://doi.org/10.1038/nmat1806CrossRef

24.

D. Kim, S. Jeong, B.K. Park, J. Moon, Direct writing of silver conductive patterns: Improvement of film morphology and conductance by controlling solvent compositions. Appl. Phys. Lett. 89(26), 87–90 (2006). https://doi.org/10.1063/1.2424671CrossRef

25.

J. Perelaer, B.J. De. Gans, U.S. Schubert, Ink-jet printing and microwave sintering of conductive silver tracks. Adv. Mater. 18(16), 2101–2104 (2006). https://doi.org/10.1002/adma.200502422CrossRef

26.

K.A. Bogle, S.D. Dhole, V.N. Bhoraskar, Silver nanoparticles: synthesis and size control by electron irradiation. Nanotechnology 17(13), 3204–3208 (2006). https://doi.org/10.1088/0957-4484/17/13/021CrossRef

27.

Y. Long, J. Wu, H. Wang, X. Zhang, N. Zhao, J. Xu, Rapid sintering of silver nanoparticles in an electrolyte solution at room temperature and its application to fabricate conductive silver films using polydopamine as adhesive layers. J. Mater. Chem. 21(13), 4875–4881 (2011). https://doi.org/10.1039/c0jm03838eCrossRef

28.

M. Layani, S. Magdassi, Flexible transparent conductive coatings by combining self-assembly with sintering of silver nanoparticles performed at room temperature. J. Mater. Chem. 21(39), 15378–15382 (2011). https://doi.org/10.1039/c1jm13174eCrossRef

29.

M. Grouchko, A. Kamyshny, C.F. Mihailescu, D.F. Anghel, S. Magdassi, Conductive inks with a ‘built-in’ mechanism that enables sintering at room temperature. ACS Nano 5(4), 3354–3359 (2011). https://doi.org/10.1021/nn2005848CrossRef

30.

T. Öhlund, J. Örtegren, S. Forsberg, H.E. Nilsson, Paper surfaces for metal nanoparticle inkjet printing. Appl. Surf. Sci. 259, 731–739 (2012). https://doi.org/10.1016/j.apsusc.2012.07.112CrossRef

31.

T. Öhlund, M. Hummelgård, H. Olin, Sintering inhibition of silver nanoparticle films via AgCl nanocrystal formation. Nanomaterials 7(8), 1–13 (2017). https://doi.org/10.3390/nano7080224CrossRef

32.

J. Mähler, I. Persson, A study of the hydration of the alkali metal ions in aqueous solution. Inorg. Chem. 51(1), 425–438 (2012). https://doi.org/10.1021/ic2018693CrossRef

33.

V.I. Volkov et al., Hydration and diffusion of h+, li+, na+, cs+ ions in cation-exchange membranes based on polyethylene-and sulfonated-grafted polystyrene studied by NMR technique and ionic conductivity measurements. Membranes (Basel) 10(10), 1–14 (2020). https://doi.org/10.3390/membranes10100272CrossRef

34.

A.H. Lu, E.L. Salabas, F. Schüth, Magnetic nanoparticles: synthesis, protection, functionalization, and application. Angew. Chem.—Int. Ed. 46(8), 1222–1244 (2007). https://doi.org/10.1002/anie.200602866CrossRef

35.

N. Ali, J.A. Teixeira, A. Addali, A review on nanofluids: fabrication, stability, and thermophysical properties. J. Nanomater. (2018). https://doi.org/10.1155/2018/6978130CrossRef

36.

T.W. Hansen, A.T. Delariva, S.R. Challa, A.K. Datye, Sintering of catalytic nanoparticles: particle migration or ostwald ripening? Acc. Chem. Res. 46(8), 1720–1730 (2013). https://doi.org/10.1021/ar3002427CrossRef

37.

R. Anderson, R. Buscall, R. Eldridge, P. Mulvaney, P.J. Scales, Ostwald ripening of comb polymer stabilised Ag salt nanoparticles. Colloids Surfaces A Physicochem. Eng. Asp. 459, 58–64 (2014). https://doi.org/10.1016/j.colsurfa.2014.06.033CrossRef

38.

A. Fahmy, W.H. Eisa, M. Yosef, A. Hassan, Ultra-thin films of poly(acrylic acid)/silver nanocomposite coatings for antimicrobial applications. J. Spectrosc. (2016). https://doi.org/10.1155/2016/7489536CrossRef

39.

R. Das, S.S. Nath, D. Chakdar, G. Gope, R. Bhattacharjee, Synthesis of silver nanoparticles and their optical properties. J. Exp. Nanosci. 5(4), 357–362 (2010). https://doi.org/10.1080/17458080903583915CrossRef

40.

D. Rawlins, J. Kayes, Steric stabilization of suspensions. Drug Dev. Ind. Pharm. 6(5), 427–440 (1980). https://doi.org/10.3109/03639048009068715CrossRef

41.

H. Markovitz, G.E. Kimball, The effect of salts on the viscosity of solutions of polyacrylic acid. J. Colloid Sci. 5(2), 115–139 (1950). https://doi.org/10.1016/0095-8522(50)90014-6CrossRef

Titel: Chemical sintering of Ag nanoparticle conductive inks at room temperature for printable electronics
verfasst von: Bethel Faith Y. Rezaga
Mary Donnabelle L. Balela
Publikationsdatum: 12.06.2021
Verlag: Springer US
Erschienen in: Journal of Materials Science: Materials in Electronics / Ausgabe 13/2021
Print ISSN: 0957-4522
Elektronische ISSN: 1573-482X
DOI: https://doi.org/10.1007/s10854-021-06313-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 13/2021

All-solution-processed environment-friendly solid-state BiOI photovoltaic cell with high-short-circuit current by successive ionic layer adsorption and reaction (SILAR)

Preliminary study on the performance of a redox capacitor with the use of ionic liquid-based gel polymer electrolyte and polypyrrole electrodes

Conductivity of solution-processed films of a metal-free chlorophyll derivative: drop casting vs. spin coating

High energy storage density and large strain with ultra-low hysteresis in Mn-doped 0.65Bi0.5Na0.5TiO3-0.35SrTiO3 ceramics

Poly(acrylonitrile butadiene styrene)/poly(vinylidene fluoride) binary blends films with superior breakdown strength and discharge efficiency

Synthesis of the hexaferrite semiconductor SrFe12O19 and its application in the photodegradation of Basic Red 46