nach oben

Erschienen in:

31.12.2022 | Original Research

Closed-loop recycling of colored regenerated cellulose fibers from the dyed cotton textile waste

verfasst von: Hongxia Liu, Wei Fan, Yaping Miao, Hao Dou, Yang Shi, Shujuan Wang, Xinqing Zhang, Lin Hou, Xichen Yu, Su Shiung Lam, Shengbo Ge

Erschienen in: Cellulose | Ausgabe 4/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Worldwide, 45 million tons of waste cotton textiles are produced annually, of which 75% is burned and buried, leading to serious environmental pollution. In this study, a method for directly preparing colored regenerated cellulose fibers (CRCFs) from dyed cotton textile waste (DCTW) was demonstrated. The tensile strength of CRCFs reached 226 MPa, which was equivalent to that of commercial viscose fibers. CRCFs exhibited excellent color fastness and hydrophilicity. In addition, CRCFs can be reprocessed into secondary CRCFs. The tensile strength of secondary CRCFs was 14.64% less than that of the primary CRCFs due to the reduction in the polymerization degree of secondary CRCFs; however, it also can be woven into fabrics. The exploration of the secondary utilization of CRCFs provides an experimental basis for prolonging the service life of DCTW. This approach of preparing CRCFs achieves closed-loop recycling of waste colored cellulose textiles and prevents environmental pollution caused by decoloring and dyeing.

Vorheriger Artikel Pilot-scale production of highly durable bioactive and UV-protective cotton fabric by electroless deposition of copper oxide on cotton fabric

Nächster Artikel Eco-friendly Modal/alginate knitted fabrics with intrinsic flame retardancy and wearability

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Burton K (2018) Reducing textile waste in the apparel industry: examining EPR as an option. Cloth Cult 5(1):33–45. https://doi.org/10.1386/cc.5.1.33-1CrossRef

Chapagain AK, Hoekstra AY, Savenije H, Gautam R (2007) The water footprint of cotton consumption: an assessment of the impact of worldwide consumption of cotton products on the water resources in the cotton producing countries. Ecol Econ 60(1):186–203. https://doi.org/10.1016/j.ecolecon.2005.11.027CrossRef

Chen L, Wang B, Ruan X, Chen J, Yang Y (2015) Hydrolysis-free and fully recyclable reactive dyeing of cotton in green, non-nucleophilic solvents for a sustainable textile industry. J Clean Prod 107:550–556. https://doi.org/10.1016/j.jclepro.2015.05.144CrossRef

Dassanayake RS, Dissanayake N, Fierro JS, Abidi N, Quitevis EL, Boggavarappu K, Thalangamaarachchige VD (2021) Characterization of cellulose nanocrystals by current spectroscopic techniques. Appl Spectrosc Rev. https://doi.org/10.1080/05704928.2021.1951283CrossRef

De Silva R, Byrne N (2017) Utilization of cotton waste for regenerated cellulose fibres: influence of degree of polymerization on mechanical properties. Carbohydr Polym 174:89–94. https://doi.org/10.1016/j.carbpol.2017.06.042CrossRefPubMed

Fan W, Zhang G, Zhang X, Dong K, Liang X, Chen W, Yu L, Zhang Y (2022) Superior unidirectional water transport and mechanically stable 3D orthogonal woven fabric for human body moisture and thermal management. Small 18:e2107150. https://doi.org/10.1002/smll.202107150CrossRefPubMed

French AD (2014) Idealized powder diffraction patterns for cellulose polymorphs. Cellulose 21:885–896. https://doi.org/10.1007/s10570-013-0030-4CrossRef

French AD (2020) Increment in evolution of cellulose crystallinity analysis. Cellulose 27:5445–5448. https://doi.org/10.1007/s10570-020-03172-zCrossRef

Haslinger S, Wang Y, Rissanen M, Lossa MB, Tanttu M, Ilen E, Määttänen M, Harlin A, Humme M, Sixta H (2019) Recycling of vat and reactive dyed textile waste to new colored man-made cellulose fibers. Green Chem 21:5598–5610. https://doi.org/10.1039/c9gc02776aCrossRef

Haule LV, Carr CM, Rigout M (2016) Preparation and physical properties of regenerated cellulose fibres from cotton waste garments. J Clean Prod 112:4445–4451. https://doi.org/10.1016/j.jclepro.2015.08.086CrossRef

Kasavan S, Yusoff S, Guan NC, Zaman NSK, Fakri MFR (2021) Global trends of textile waste research from 2005 to 2020 using bibliometric analysis. Environ Sci Pollut Res 28(33):44780–44794. https://doi.org/10.1007/s11356-021-15303-5CrossRef

Lei L, Lindbrathen A, Sandru M, Gutierrez MTG, Zhang X, Hillestad M, He X (2018) Spinning cellulose hollow fibers using 1-ethyl-3-methylimidazolium acetate-dimethylsulfoxide co-solvent. Polymers 10(9):972. https://doi.org/10.3390/polym10090972CrossRefPubMedPubMedCentral

Li J, Lu S, Liu F, Qiao Q, Na H, Zhu J (2021) Structure and properties of regenerated cellulose fibers based on dissolution of cellulose in a CO₂ switchable solvent. ACS Sustain Chem Eng 9:4744–4754. https://doi.org/10.1021/acssuschemeng.0c08907CrossRef

Liu W, Liu S, Liu T, Liu T, Zhang J, Liu H (2018) Eco-friendly post-consumer cotton waste recycling for regenerated cellulose fibers. Carbohydr Polym 206:141–148. https://doi.org/10.1016/j.carbpol.2018.10.046CrossRefPubMed

Lu L, Fan W, Meng X, Liu T, Han L, Zhang T, Tian H (2020) Modal analysis of 3D needled waste cotton fiber/epoxy composites with experimental and numerical methods. Text Res J 91(3–4):358–372. https://doi.org/10.1177/0040517520944477CrossRef

Ma Y, Zeng B, Wang X, Byrne N (2019) Circular textiles: closed loop fiber to fiber wet spun process for recycling cotton from denim. ACS Sustain Chem Eng 7(14):11937–11943. https://doi.org/10.1021/acssuschemeng.8b06166CrossRef

Mendes ISF, Prates A, Evtuguin DV (2021) Production of rayon fibres from cellulosic pulps: state of the art and current developments. Carbohydr Polym 273:118466. https://doi.org/10.1016/j.carbpol.2021.118466CrossRefPubMed

Meng X, Fan W, Wan Mahari WA, Ge S, Xia C, Wu F, Lam SS (2021) Production of three-dimensional fiber needle-punching composites from denim waste for utilization as furniture materials. J Clean Prod 281:125321. https://doi.org/10.1016/j.jclepro.2020.125321CrossRef

Muthu SS (2014) The textile supply chain and its environmental impact. In: Muthu SS (ed) Assessing the environmental impact of textiles and the clothing supply chain. Woodhead Publishing, Sawston, pp 1–31. https://doi.org/10.1533/9781782421122.1CrossRef

Ning XA, Lin MQ, Shen LZ, Zhang JH, Wang JY, Wang YJ (2014) Levels, composition profiles and risk assessment of polycyclic aromatic hydrocarbons (PAHs) in sludge from ten textile dyeing plants. Environ Res 132:112–118. https://doi.org/10.1016/j.envres.2014.03.041CrossRefPubMed

Olsson C (2013) Wet spinning of cellulose from ionic liquid solutions–viscometry and mechanical performance. J Appl Polym Sci 127(6):4542–4548. https://doi.org/10.1002/app.38064CrossRef

Palacios-Mateo C, Yvonne VDM, Seide G (2021) Analysis of the polyester clothing value chain to identify key intervention points for sustainability. Environ Sci Eur 33(1):1–25. https://doi.org/10.1186/s12302-020-00447-xCrossRef

Palme A, Idström A, Nordstierna L, Brelid H (2014) Chemical and ultrastructural changes in cotton cellulose induced by laundering and textile use. Cellulose 21(6):4681–4691. https://doi.org/10.1007/s10570-014-0434-9CrossRef

Ren J, Liang H, Chan FTS (2017) Urban sewage sludge, sustainability, and transition for Eco-City: multi-criteria sustainability assessment of technologies based on best-worst method. Technol Forecast Soc Chang 116:29–39. https://doi.org/10.1016/j.techfore.2016.10.070CrossRef

Sezgin H, Kucukali-Ozturk M, Berkalp OB, Yalcin-Enis I (2021) Design of composite insulation panels containing 100% recycled cotton fibers and polyethylene/polypropylene packaging waste. J Clean Prod 304:127132. https://doi.org/10.1016/j.jclepro.2021.127132CrossRef

Turemen M, Demir A, Ozdogan E (2019) Recycling and importance for textile industry. Pamukkale Univ J Eng Sci-Pamukkale Universitesi Muhendislik Bilimleri Dergisi 25(7):805–809. https://doi.org/10.5505/pajes.2018.97253CrossRef

Wang S, Zhang T, Zhang X, Ge S, Fan W (2022) Development of 3D needled composite from denim waste and polypropylene fibers for structural applications. Constr Build Mater 314:125583. https://doi.org/10.1016/j.conbuildmat.2021.125583CrossRef

Weber S, Lynes J, Young SB (2017) Fashion interest as a driver for consumer textile waste management: reuse, recycle or disposal. Int J Consum Stud 41(2):207–215. https://doi.org/10.1111/ijcs.12328CrossRef

Wedin H, Niit E, Mansoor ZA, Kristinsdottir AR, Hanna D, Jonsson C, Lindgren C (2018) Preparation of viscose fibres stripped of reactive dyes and wrinkle-free crosslinked cotton textile finish. J Polym Environ 26(9):3603–3612. https://doi.org/10.1007/s10924-018-1239-yCrossRef

Wu GH, Wang LL, Ding XM, Wu XY, Cuc S (2015) Water footprint and carbon footprint reduction in textile’s waste recycling. Ind Text 66(2):85–89

Wu Y-L, Yao L, Geng A-Y (2016) A study on the operating mechanism of waste textile’s recycling and reusing system in Germany. In: Textile bioengineering and informatics symposium/6th Asian protective clothing conference, pp 895–902

Yao WQ, Weng YY, Catchmark JM (2020) Improved cellulose X-ray diffraction analysis using Fourier series modeling. Cellulose 27:5563–5579. https://doi.org/10.1007/s10570-020-03177-8CrossRef

Yousef S, Tatariants M, Tichonovas M, Sarwar Z, Jonuškienė I, Kliucininkas L (2019) A new strategy for using textile waste as a sustainable source of recovered cotton. Resour Conserv Recycl 145:359–369. https://doi.org/10.1016/j.resconrec.2019.02.031CrossRef

Yu X, Fan W, Azwar E, Ge S, Xia C, Sun Y, Lam SS (2021) Twisting in improving processing of waste-derived yarn into high-performance reinforced composite. J Clean Prod 317:128446. https://doi.org/10.1016/j.jclepro.2021.128446CrossRef

Zhen L, Hui W, Li Z, Lu X, Zhou K (2011) Rheological properties of cotton pulp cellulose dissolved in 1-butyl-3-methylimidazolium chloride solutions. Polym Eng Sci 51(12):2381–2386. https://doi.org/10.1002/pen.22010CrossRef

Zhou Y, Lu J, Zhou Y, Liu Y (2019) Recent advances for dyes removal using novel adsorbents: a review. Environ Pollut 252:352–365. https://doi.org/10.1016/j.envpol.2019.05.072CrossRefPubMed

Titel: Closed-loop recycling of colored regenerated cellulose fibers from the dyed cotton textile waste
verfasst von: Hongxia Liu
Wei Fan
Yaping Miao
Hao Dou
Yang Shi
Shujuan Wang
Xinqing Zhang
Lin Hou
Xichen Yu
Su Shiung Lam
Shengbo Ge
Publikationsdatum: 31.12.2022
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 4/2023
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-022-05002-w

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 4/2023

Properties of quaternized and crosslinked carboxymethylcellulose films

Preparation and characterization of oxidized pectin/N-succinyl chitosan/graphene oxide hydrogels

Self-floating solar evaporator based on kapok fiber for high-performance solar steamgeneration

Preparation of porous microcrystalline cellulose from mezcal industry agave bagasse by low reagent loading sequential chemical treatment

Reduced graphene oxide/polyurethane coatings for wash-durable wearable piezoresistive sensors

Cellulose nanofibril production by the combined use of four mechanical fibrillation processes with different destructuration effects