nach oben

Erschienen in:

2024 | OriginalPaper | Buchkapitel

Comprehensive Study on Wire Arc Additive Manufacturing (WAAM)

verfasst von : Saksham Chauhan, Andriya Narasimhulu

Erschienen in: Advances in Mechanical Engineering and Material Science

Verlag: Springer Nature Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Wire arc additive manufacturing (WAAM) is presently growing as the major hub of research bodies throughout the universe. This is straightly noticeable in an enormous paper published recently pertaining to a myriad of distinct matters. Additive manufacturing is the quickest technique for the development of a product, and this is indicated by scientific industrial sections. It reinstated conventional ways in a few industrial circumstances by bringing down material utilisation. WAAM is much closer to welding in the process as it makes use of stratified deposition to design huge portions with less intricacy. Numerous experiments and estimates have evolved to ameliorate material properties concerning the remaining deformities like crackling and spattering. WAAM has acquired popularity as it has many benefits and very high efficiency. It increases the efficiency of the material and has a rate of deposition which is again very high and the lead time is shorter, the performance of the components is better, and the inventory cost is very low. This review is proposed to provide an appropriate summary of the field of WAAM. The inscribed matter in this review is embraced but not restricted to the materials. Various processes like monitoring, path planning, and modelling fall into the operations and techniques of WAAM. The alliance of detecting numerous authors into a consolidated form is the essence of this review. It is proposed to discover various fields in which the work is mislaid and in what ways the distinct topics can be manually integrated. A crucial estimation of introduced research along with welding research and a remarkable focus on additive manufacturing will accomplish this review.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Experimental Analysis and Productivity Enhancement of Single Basin Solar Still by Utilizing Latent and Sensible Heat Storage Material

Nächstes Kapitel An Experimental Study to Probe Defect Formation and Failure Mode in Dissimilar Spot Joints

Ziolkowski M, Dyl T (2020) Possible applications of additive manufacturing technologies in shipbuilding: a review. Machines 8(4):84. https://doi.org/10.3390/machines8040084CrossRef

Zocca A, Colombo P, Gomes CM, Günster J (2015) Additive manufacturing of ceramics: Issues, potentialities, and opportunities. J Am Ceram Soc 98(7):1983–2001. https://doi.org/10.1111/jace.13700CrossRef

https://manufacturing.report/articles/which-additive-manufacturing-process-is-right-for-you

Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williams CB et al (2015) The status, challenges, and future of additive manufacturing in engineering. Comput Aided Des 69:65–89. https://doi.org/10.1016/j.cad.2015.04.001CrossRef

Hu J, Tsai HL (2007) Heat and mass transfer in gas metal arc welding. Part I: The arc. Int J Heat Mass Transf 50:833–846

Cunningham CR, Flynn JM, Shokrani A, Dhokia V, Newman ST (2018) Invited review article: strategies and processes for high quality wire arc additive manufacturing. Addit Manuf 22:672–686

Derekar KS (2018) A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium. Mater Sci Technol (United Kingdom) 34:895–916CrossRef

Williams SW, Martina F, Addison AC, Ding J, Pardal G, Colegrove P (2016) Wire + Arc additive manufacturing. Mater Sci Technol 32:641–647CrossRef

Cong B, Ding J, Williams S (2015) Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy. Int J Adv Manuf Technol 76:1593–1606

10.

Pickin CG, Young K (2006) Evaluation of cold metal transfer (CMT) process for welding aluminium alloy. Sci Technol Weld Join 11:583–585CrossRef

11.

Ali Y, Barnikol-Oettler S, Reimann J, Hildebrand J, Henckell P, Bergmann JP (2019) Wire arc additive manufacturing of hot work tool steel with CMT process. J Mater Process Technol 269:109–116CrossRef

12.

King WE, Barth HD, Castillo VM, Gallegos GF, Gibbs JW, Hahn DE, Kamath C, Rubenchik AM (2014) Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. J Mater Process Technol 214:2915–2925CrossRef

13.

Geng H, Li J, Xiong J, Lin X, Zhang F (2017) Optimization of wire feed for GTAW based additive manufacturing. J Mater Process Technol 243:40–47CrossRef

14.

Martina F, Mehnen J, Williams SW, Colegrove P, Wang F (2012) Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti-6Al-4V. J Mater Process Technol 212:1377–1386CrossRef

15.

Lin JJ, Lv YH, Liu YX, Xu BS, Sun Z, Li ZG, Wu YX (2016) Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing. Mater Des 102:30–40CrossRef

16.

https://www.twi-global.com/technical-knowledge/job-knowledge/arc-basedadditive-manufacturing-137

17.

Wua B, Pana Z, Dingb D, Cuiuria D, Lia H, Xuc J, Norrisha J (2018) J Manuf Proc 35:127–139CrossRef

18.

Determination of Surface Roughness in Wire and Arc Additive Manufacturing Based on Laser Vision Sensing

19.

Manufacture of Complex Titanium Parts using Wire+Arc Additive ManufactureAdrian Addison, Jialuo Ding, Filomeno Martina, Helen Lockett, Stewart Williams Welding Engineering and Laser Processing Centre (WELPC), Cranfield University, Cranfield, MK43 0AL, United Kingdom Xiang Zhang, Faculty of Engineering and Computing, Coventry University, Coventry CV1 2JH,UK

20.

Wang F, Williams S, Colegrove PA, Antonysamy A (2013) Metall Mat Trans A 44(2):968–977CrossRef

21.

Kurkin S, Anufriev V (1984) Weld Prod 31(10):32–34

22.

Colegrove PA, Coules H, Fairman J, Martina F, Kashoob T, Mamash H, Cozzolino LD (2013) J Mater Process Technol 213(10):1782–1791CrossRef

23.

Martina F (2014) Investigation of methods to manipulate geometry, microstructure and mechanical properties in titanium large scale wire +Arc additive manufacturing PhD thesis, Cranfield University, UK, Cranfield, UK

24.

Xu W, Gottos M, Roe M et al (2008) Impact tests on welded joints in 6000 series aluminium alloy extrusion for rail vehicles, Cambridge

25.

Skiba T, Baufeld B, van der Biest O (2009) ISIJ Int 49(10):1588–1591CrossRef

26.

Washko SD, Agger G (1990) Wrought stainless steels. ASM Metals Handbook, 10th ed., Ohio: ASM International Handbook Committee, 841

27.

Hosseini AV, Högström M, Hurtig K, Valiente Bermejo MA, Stridh L-E, Karlsson L (2019) Weld Worl 63(4):975–987. https://doi.org/10.1007/s40194-019-00735-y

28.

Muthupandi V, Srinivasan PB, Seshadri SK, Sundaresan S (2003) Mater Sci Eng A 358:9CrossRef

29.

Vitek JM, David SA, Alexander DJ, Keiser JR, Nanstad RK (1991) Acta Metall Mater 39:503CrossRef

30.

Liao J (2001) ISIJ Int 41(5):460–467CrossRef

31.

Cong BQ, Su Y, Qi BJ (2016) Wire + arc additive manufacturing for aluminum alloy deposits. Aeros Manuf Technol 29–32:37

32.

Wang S, Gu H, Wang W, Li C, Ren L, Wang Z et al (2019) Study on microstructural and mechanical properties of an Al–Cu–Sn alloy wall deposited by double-wirearc additive manufacturing process. Materials 13. https://doi.org/10.3390/ma13010073

33.

Wang P, Zhang H, Zhu H, Li Q, Feng M (2021) Wire-arc additive manufacturing of AZ31 magnesium alloy fabricated by cold metal transfer heat source: processing, microstructure, and mechanical behavior. J Mater Process Technol 288:116895. https://doi.org/10.1016/j.jmatprotec.2020.116895CrossRef

34.

Lervåg M, Sørensen C, Robertstad A, Brønstad BM, Nyhus B, Eriksson M, et al (2020) Additive manufacturing with superduplex stainless steel wire by CMT process. Metals 10. https://doi.org/10.3390/met10020272

35.

Wang S, Gu H, Wang W, Li C, Ren L, Wang Z et al (2020) The influence of heat input on the microstructure and properties of wire-arc-additive manufactured Al-Cu-Sn alloy deposits. Metals 10. https://doi.org/10.3390/met10010079

36.

Bai JY, Wang JH, Lin SB (2016) Model for multi-beads overlapping calculation in GTA-additive manufacturing. J Mech Eng 52:97–102. https://doi.org/10.3901/JME.2016.10.097CrossRef

37.

Zhou LZ, Liu SH, Dong P (2006) Direct rapid manufacturing of metal parts besed on 3D welding. China Mech Eng 17

38.

Abe T, Ji Kaneko HS (2020) Thermal sensing and heat input control for thin walled structure building based on numerical simulation for wire and arc additive manufacturing. Addit. Manuf 35. https://doi.org/10.1016/j.addma.2020.101357

39.

Wu B, Pan Z, Ding D, Cuiuri D, Li H, Xu J et al (2018) A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement. J Manuf Process 35:127–139. https://doi.org/10.1016/j.jmapro.2018.08.001CrossRef

40.

Sowrirajan M, Vijayan S, Arulraj M (2022) Welding based additive manufacturing: fundamentals. https://doi.org/10.5772/intechopen.104768

41.

Bhatt PM, Kulkarni A, Kanyuck A, Malhan RK, Santos LS, Thakar S et al (2022) Automated process planning for conformal wire arc additive manufacturing. Int J Adv Manuf Technol 7:1–26. https://doi.org/10.1007/s00170-021-08391-7CrossRef

42.

Dunlavey MR (1983) Efficient polygon-filling algorithms for rasterdisplays. ACM Trans Graph 2:264–273. https://doi.org/10.1145/245.248CrossRef

43.

Rajan VT, Srinivasan V, Tarabanis KA (2001) The optimal zigzag direction for filling a two-dimensional region. Rapid Prototyp J 7:231–241. https://doi.org/10.1108/13552540110410431CrossRef

44.

Magee M, Seida S (1995) Path planning with offset curves for layered fabrication processes. J Manuf Syst 14:1995

45.

Wang H, Jang P, Stori JA (2005) A metric-based approach to two dimensional (2D) tool-path optimization for high-speed machining. J Manuf Sci Eng Trans ASME 127:33–48. https://doi.org/10.1115/1.1830492CrossRef

46.

Ren F, Sun Y, Guo D (2009) Combined reparameterization-based spiral toolpath generation for five-axis sculptured surface machining. Int J Adv Manuf Technol 40:760–768. https://doi.org/10.1007/s00170-008-1385-9CrossRef

47.

Chiu WK, Yeung YC, Yu KM (2006) Toolpath generation for layer manufacturing of fractal objects. Rapid Prototyp J 12:214–221. https://doi.org/10.1108/13552540610682723CrossRef

48.

Wasser T, Jayal AD, Pistor C (1999) Implementation and evaluation of novel buildstyles in fused deposition modeling (FDM). Solid Free Fabr Proc 1999:95–102

49.

Dwivedi R, Kovacevic R (2004) Automated torch path planning using polygon subdivision for solid freeform fabrication based on welding. J Manuf Syst 23:278–291. https://doi.org/10.1016/S0278-6125(04)80040-2CrossRef

50.

Ding D, Pan Z, Cuiuri D, Li H (2014) A tool-path generation strategy for wire and arc additive manufacturing. Int J Adv Manuf Technol 73:173–183. https://doi.org/10.1007/s00170-014-5808-5CrossRef

51.

Jin GQ, Li WD, Gao L (2013) An adaptive process planning approach of rapid prototyping and manufacturing. Robot Comput Integr Manuf 29:23–38. https://doi.org/10.1016/j.rcim.2012.07.001CrossRef

52.

Ding D, Pan Z, Cuiuri D, Li H (2015) A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures. Robot Comput Integr Manuf 34:8–19. https://doi.org/10.1016/j.rcim.2015.01.003CrossRef

53.

Ding D, Pan Z, Cuiuri D, Li H, Larkin N (2016) Adaptive path planning for wire-feed additive manufacturing using medial axis transformation. J Clean Prod 133:942–952. https://doi.org/10.1016/j.jclepro.2016.06.036CrossRef

54.

Ding D, Pan Z, Cuiuri D, Li H, Van Duin S, Larkin N (2016) Bead modelling and implementation of adaptive MAT path in wire and arc additive manufacturing. Robot Comput Integr Manuf 39:32–42. https://doi.org/10.1016/j.rcim.2015.12.004CrossRef

55.

Michel M, Lockett H, Ding J, Martina F, Marinelli G, Williams S (2019) A modular path planning solution for wire + arc additive manufacturing. Robot Comput Integr Manuf 60:1–11. https://doi.org/10.1016/j.rcim.2019.05.009CrossRef

56.

Panchagnula JS, Simhambhatla S (2018) Manufacture of complex thin-walled metallic objects using weld-deposition based additive manufacturing. Robot Comput Integr Manuf 49:194–203. https://doi.org/10.1016/j.rcim.2017.06.003

57.

Ye D, Wu D, Hua X, Xu C, Wu Y (2017) Using the multi-wire GMAW processes for controlling the formation of humping. Weld World 61:649–658. https://doi.org/10.1007/s40194-017-0458-5CrossRef

58.

Nguyen TC, Weckman DC, Johnson DA, Kerr HW (2005) The humping phenomenon during high speed gas metal arc welding. Sci Technol Weld Join 10:447–459. https://doi.org/10.1179/174329305X44134CrossRef

59.

Anzalone G, Zhang C, Wijnen B, Sanders P, Pearce J et al (2013) A Low-cost open-source metal 3-D printer. IEEE Access, IEEE 1:803–810. https://doi.org/10.1109/ACCESS.2013.2293018.hal-02119701CrossRef

60.

Zhang M, Chen Y, Li P, Male AT (2003) Weld deposition-based rapid prototyping: a preliminary study. J Mater Process Technol 135:347–357. https://doi.org/10.1016/S0924-0136(02)00867-1CrossRef

61.

Graf M, Halsig A, Hofer K, Awiszus B, Mayr P (2018) Thermo-mechanical modelling of wire-arc additive manufacturing (WAAM) of semi-finished products, Metals (Basel). https://doi.org/10.3390/met8121009

62.

Yehorov Y, da Silva LJ, Scotti A (2019) Balancing WAAM production costs and wall surface quality through parameter selection: a case study of an al-Mg5 alloy multilayer-non-oscillated single PassWall. J Manuf Mater Process. https://doi.org/10.3390/jmmp3020032CrossRef

63.

Wu W, Xue J, Wang L, Zhang Z, Hu Y, Dong C (2019) Forming process, microstructure, and mechanical properties of thin-walled 316L stainless steel using speed-cold-welding additive manufacturing. Metals (Basel). https://doi.org/10.3390/met9010109CrossRef

64.

Zhan Q, Liang Y, Ding J, Williams S (2017) A wire deflectiondetection method based on image processing in wire + arc additive manufacturing. Int J Adv Manuf Technol 89:755–763. https://doi.org/10.1007/s00170-016-9106-2CrossRef

65.

Chen X, Zhang H, Hu J, Xiao Y (2019) A passive on-line defect detection method for wire and arc additive manufacturing based on infrared thermography. Solid Free Fabr 2019 Proc 30th Annu Int Solid Free Fabr Symp - An Addit Manuf Conf SFF (2019):1497–1510

66.

Huang Y, Wu D, Zhang Z, Chen H, Chen S (2017) EMD-based pulsed TIG welding process porosity defect detection and defect diagnosis using GA-SVM. J Mater Process Technol 239:92–102. https://doi.org/10.1016/j.jmatprotec.2016.07.015CrossRef

67.

Sumesh KR, Mohandas K, Babu RS (2015) Use of machine learning algorithms for weld quality monitoring using acoustic Signature. Procedia Comput Sci 50:316–322. https://doi.org/10.1016/j.procs.2015.04.042

68.

Xiong J, Zhang G (2014) Adaptive control of deposited height in GMAW-based layer additive manufacturing. J Mater Process Technol 214:962–968. https://doi.org/10.1016/j.jmatprotec.2013.11.014CrossRef

69.

Smith JS, Balfour C (2005) Real-time top-face vision based control of weld pool size. Ind Rob 32:334–340. https://doi.org/10.1108/01439910510600209CrossRef

70.

Liu YK, Zhang YM (2013) Control of 3D weld pool surface. Control Eng Pract 21:1469–1480. https://doi.org/10.1016/j.conengprac.2013.06.019CrossRef

71.

Xu F, Madhaven N, Dhokia V, McAndrew AR, Colegrove PA, Williams S et al (2016) Multi-sensor system for wire-fed additive manufacture of titanium alloys. In: 26th International conference on flexible automation and intelligent manufacturing (FAIM 2016) 2016: Article in Press.

72.

Xia C, Pan Z, Polden J, Li H, Xu Y, Chen S et al (2020) A review on wire arc additive manufacturing: monitoring, control and a framework of automated system. J Manuf Syst 57:31–45. https://doi.org/10.1016/j.jmsy.2020.08.008CrossRef

73.

Vazquez L, Rodrıguez N, Rodrıguez I, Alberdi, E, Alvarez P (2020) Influence of Interpass cooling conditions on microstructure and tensile properties of Ti-6Al-4V parts manufactured by WAAM, Weld. World, 64:1377–1388. https://doi.org/10.1007/s40194-020-00921-3

74.

Zhao H, Zhang G, Yin Z, Wu L (2013) Effects of interpass idle time on thermal stresses in multipass multilayer weld-based rapid prototyping. J Manuf Sci Eng Trans ASME 135:1–7. https://doi.org/10.1115/1.4023363CrossRef

75.

Montevecchi F, Venturini G, Grossi N, Scippa A, Campatelli G (2018) Idle time selection for wire-arc additive manufacturing: a finite element-based technique. Addit Manuf 21:479–486. https://doi.org/10.1016/j.addma.2018.01.007CrossRef

76.

Geng H, Li J, Xiong J, Lin X (2017) Optimisation of interpass temperature and heat input for wire and arc additive manufacturing 5A06 aluminium alloy. Sci Technol Weld Join 22:472–483. https://doi.org/10.1080/13621718.2016.1259031CrossRef

77.

Wu B, Pan Z, Ding D, Cuiuri D, Li H, Fei Z (2018) The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy. J Mater Process Technol 258:97–105. https://doi.org/10.1016/j.jmatprotec.2018.03.024CrossRef

78.

Ding J, Colegrove P, Mehnen J, Ganguly S, Almeida PMS, Wang F et al (2011) Thermo-mechanical analysis of wire and arc additive layer manufacturing process on large multi-layer parts. Comput Mater Sci 50:3315–3322. https://doi.org/10.1016/j.commatsci.2011.06.023CrossRef

79.

Denlinger ER, Heigel JC, Michaleris P, Palmer TA (2015) Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys. J Mater Process Technol 215:123–131. https://doi.org/10.1016/j.jmatprotec.2014.07.030CrossRef

80.

Ingram E, Golan O, Haj-Ali R, Eliaz N (2019) The effect of localized vibration during welding on the microstructure and mechanical behavior of steel welds. Materials (Basel). https://doi.org/10.3390/ma12162553CrossRef

81.

Shen C, Pan Z, Cuiuri D, Ding D, Li H (2017) Influences of deposition current and interpass temperature to the fe3al-based iron aluminide fabricated using wire-arc additive manufacturing process. Int J Adv Manuf Technol 88:2009–2018. https://doi.org/10.1007/s00170-016-8935-3CrossRef

82.

Cong B, Ding J, Williams S (2015) Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6 3 % Cu alloy. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-014-6346-xCrossRef

83.

Nie Y, Zhang P, Wu X, Li G, Yan H, Yu Z (2018) Rapid prototyping of 4043 al-alloy parts by cold metal transfer. Sci Technol Weld Join 23:527–535. https://doi.org/10.1080/13621718.2018.1438236CrossRef

84.

Jose MJ, Kumar SS, Sharma A (2016) Vibration assisted welding and their influence on quality of welds. Sci Technol Weld Join 21:243–258. https://doi.org/10.1179/1362171815Y.0000000088CrossRef

85.

Zhang C, Gao M, Zeng X (2019) Workpiece vibration augmented wire arc additive manufacturing of high strength aluminum alloy. J Mater Process Technol 271:85–92. https://doi.org/10.1016/j.jmatprotec.2019.03.028CrossRef

86.

Ryan EM, Sabin TJ, Watts JF, Whiting MJ (2018) The influence of build parameters and wire batch on porosity of wire and arc additive manufactured aluminium alloy 2319. J Mater Process Technol 262:577–584. https://doi.org/10.1016/j.jmatprotec.2018.07.030

87.

Gao C, Chen X, Chen X, Su C (2019) Microstructure and mechanical properties of as-deposited and heat-treated additive manufactured 9Cr steel. Mater Sci Technol (United Kingdom) 35:2234–2242. https://doi.org/10.1080/02670836.2019.1668603CrossRef

88.

Gu J, Ding J, Williams SW, Gu H, Bai J, Zhai Y et al (2016) The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al-6.3Cu alloy, Mater Sci Eng A, 651:18–26. https://doi.org/10.1016/j.msea.2015.10.101

89.

Yang Q, Xia C, Deng Y, Li X, Wang H (2019) Microstructure and mechanical properties of AlSi7Mg0.6 Aluminum alloy fabricated by wire and arc additive manufacturing based on cold Metal transfer (WAAM-CMT), Materials (Basel). https://doi.org/10.3390/ma12162525

90.

Wang T, Zhang Y, Wu Z, Shi C (2018) Microstructure and properties of die steel fabricated by WAAM using H13 wire. Vacuum 149:185–189. https://doi.org/10.1016/j.vacuum.2017.12.034CrossRef

91.

Kim D, Rhee S, Park H (2002) Modelling and optimization of a GMA welding process by genetic algorithm and response surface methodology. Int J Prod Res 40:1699–1711. https://doi.org/10.1080/00207540110119964CrossRef

92.

Gunaraj V, Murugan N (2000) Prediction and optimization of weld bead volume for the submerged arc process - Part 2. Weld J (Miami, Fla) 79:331

93.

Gunaraj V, Murugan N (1999) Application of response surface methodology for predicting weld bead quality in submerged arc welding of pipes. J Mater Process Technol 88:266–275. https://doi.org/10.1016/S0924-0136(98)00405-1CrossRef

94.

Srimath N, Murugan N (2012) Development of mathematical models for prediction of weld bead geometry in cladding mild steel valve seat rings by PTAW. Proc Eng 38:15–20. https://doi.org/10.1016/j.proeng.2012.06.003CrossRef

95.

Choteborsky R, Rusul AH, Navratilova M, Hrabe P (2010) Effects of welding process parameters on the geometry and dilution of the bead in the automatic surfacing. Conf Proceeding - 4th Int Conf TAE 2010 Trends Agric Eng 2010, 41:244–247

96.

Rao PS, Gupta OP, Murty SSN, Rao ABK (2009) Effect of process parameters and mathematical model for the prediction of bead geometry in pulsed GMA Welding. Int J Adv Manuf Technol 45:496–505. https://doi.org/10.1007/s00170-009-1991-1CrossRef

97.

Tarng YS, Yang WH (1998) Optimisation of the Weld Bead Geometry in Gas Tungsten Arc Welding by the Taguchi Method. Int J Adv Manuf Technol 14:549–554. https://doi.org/10.1007/BF01301698CrossRef

98.

Dinovitzer M, Chen X, Laliberte J, Huang X, Frei H (2019) Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure. Addit Manuf 26:138–146. https://doi.org/10.1016/j.addma.2018.12.013CrossRef

99.

Tarng YS, Juang SC, Chang CH (2002) The use of grey-based taguchi methods to determine submerged arc welding process parameters in hardfacing. J Mater Process Technol 128:1–6. https://doi.org/10.1016/S0924-0136(01)01261-4CrossRef

100.

Nagesh DS, Datta GL (2002) Prediction of weld bead geometry and penetration in shielded metal-arc welding using artificial neural networks. J Mater Process Technol 123:303–312. https://doi.org/10.1016/S0924-0136(02)00101-2CrossRef

101.

Tarng YS, Yang WH, Juang SC (2000) Use of fuzzy logic in the taguchi method for the optimization of the submerged arc welding process. Int J Adv Manuf Technol 16:688–694. https://doi.org/10.1007/s001700070040CrossRef

102.

Sarathchandra DT, Davidson MJ, Visvanathan G (2020) Parameters effect on SS304 beads deposited by wire arc additive manufacturing. Mater Manuf Process 00:1–7. https://doi.org/10.1080/10426914.2020.1743852CrossRef

Titel: Comprehensive Study on Wire Arc Additive Manufacturing (WAAM)
verfasst von: Saksham Chauhan
Andriya Narasimhulu
Verlag: Springer Nature Singapore
Buch: Advances in Mechanical Engineering and Material Science
Print ISBN: 978-981-9956-12-8

Electronic ISBN: 978-981-9956-13-5

Copyright-Jahr: 2024
DOI: https://doi.org/10.1007/978-981-99-5613-5_22

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht