nach oben

Journal of Materials Engineering and Performance

Erschienen in:

30.03.2021

Corrosion Behavior and Microstructural Characterization of Friction Stir Welded API X70 Steel

verfasst von: J. M. Giarola, J. W. Calderón-Hernández, F. F. Conde, J. B. Marcomini, H. G. de Melo, J. A. Avila, W. W. Bose Filho

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 8/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Friction stir welding (FSW) is an excellent alternative process used in pipelines circumferential welds due to fusion welded joint low corrosion resistance. This study describes the corrosion resistance as a function of the microstructural features resulting from an API X70 FSW welded joint. The microstructural features were examined by optical microscopy, scanning electron microscopy, and x-ray diffraction. The corrosion analysis was conducted employing potentiodynamic polarization tests using an electrochemical microcell, which allowed to test small circular areas delimited by a 2 mm in diameter O-ring gasket. The base metal and heat-affected zone were the most susceptible regions to corrosion due to their banded microstructures. The re-stirred-zone and stir zone were the most resistant regions to corrosion which was associated to grain refinement. The corrosion rate presented by the base metal and the heat-affected zone was approximately six times higher than the region of least susceptibility to corrosion, in this case, the re-stirred-zone.

Vorheriger Artikel Influence of Ta2O5 Addition on Thermophysical Performance of Sm2Ce2O7

Nächster Artikel Study of Carbide Precipitation in Two Cobalt-Based Alloys with Distinct Chromium and Tungsten Contents

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

M.A. Mohtadi-Bonab, J.A. Szpunar, R. Basu, and M. Eskandari, The Mechanism of Failure by Hydrogen Induced Cracking in an Acidic Environment for API, 5L X70 Pipeline Steel, Int. J. Hydrogen Energy, 2015, 40(2), p 1096–1107. https://doi.org/10.1016/j.ijhydene.2014.11.057CrossRef

A. Thomas and J.A. Szpunar, Hydrogen Diffusion and Trapping in X70 Pipeline Steel, Int. J. Hydrogen Energy, 2019, 45(3), p 2390–2404. https://doi.org/10.1016/j.ijhydene.2019.11.096CrossRef

T. Schaupp, W. Ernst, H. Spindler, and T. Kannengiesser, Hydrogen-Assisted Cracking of GMA Welded 960 MPa Grade High-Strength Steels, Int. J. Hydrogen Energy, 2020, 45(38), p 20080–20093. https://doi.org/10.1016/j.ijhydene.2020.05.077CrossRef

J. Tomków, D. Fydrych, and G. Rogalski, Dissimilar Underwater Wet Welding of HSLA Steels, Int. J. Adv. Manuf. Technol., 2020, 109(3–4), p 717–725CrossRef

L. Kumar, K.U. Yazar, and S. Pramanik, Effect of Fusion and Friction Stir Welding Techniques on the Microstructure, Crystallographic Texture and Mechanical Properties of Mild Steel, Mater. Sci. Eng. A, 2018, 2019(754), p 400–410. https://doi.org/10.1016/j.msea.2019.03.100CrossRef

D. Fairchild, A. Kumar, S. Ford, N. Nissley, R. Ayer, H. Jin, and A. Ozekcin, Research Concerning the Friction Stir Welding of Linepipe Steels, ASM Proc. Int. Conf. Trends Weld. Res. (2009), pp. 371–380

A. Świerczyńska and M. Landowski, Plasticity of Bead-on-Plate Welds Made with the Use of Stored Flux-Cored Wires for Offshore Applications, Materials (Basel), 2020, 13(17), p 3888CrossRef

L.W. Wang, Z.Y. Liu, Z.Y. Cui, C.W. Du, X.H. Wang, and X.G. Li, In Situ Corrosion Characterization of Simulated Weld Heat Affected Zone on Api X80 Pipeline Steel, Corros. Sci., 2014, 85, p 401–410CrossRef

K.-M. Moon, M.-H. Lee, K.-J. Kim, and S.-J. Kim, The Effect of Post-Weld Heat Treatment Affecting Corrosion Resistance and Hydrogen Embrittlement of HAZ Part in FCAW, Surf. Coatings Technol., 2003, 169–170, p 675–678CrossRef

10.

T. Hemmingsen, H. Hovdan, P. Sanni, and N.O. Aagotnes, The Influence of Electrolyte Reduction Potential on Weld Corrosion, Electrochim. Acta, 2002, 47(24), p 3949–3955CrossRef

11.

G.A. Zhang and Y.F. Cheng, Micro-Electrochemical Characterization of Corrosion of Welded X70 Pipeline Steel in near-Neutral PH Solution, Corros. Sci., 2009, 51(8), p 1714–1724. https://doi.org/10.1016/j.corsci.2009.04.030CrossRef

12.

J. Luo, S. Luo, L. Li, L. Zhang, G. Wu, and L. Zhu, Stress Corrosion Cracking Behavior of X90 Pipeline Steel and Its Weld Joint at Different Applied Potentials in Near-Neutral Solutions, Nat. Gas Ind. B, 2019, 6(2), p 138–144. https://doi.org/10.1016/j.ngib.2018.08.002CrossRef

13.

J.W. Sowards, T. Gnäupel-herold, J.D. Mccolskey, V.F. Pereira, and A.J. Ramirez, Characterization of Mechanical Properties, Fatigue-Crack Propagation, and Residual Stresses in a Microalloyed Pipeline-Steel Friction-Stir Weld, Mater. Des., 2015, 88, p 632–642. https://doi.org/10.1016/j.matdes.2015.09.049CrossRef

14.

D.P. Fairchild, A.J. Wasson, A. Kumar, M.L. Macia, and T.D. Anderson, Fractographic Investigation of Cleavage Initiation in Steel Friction Stir Welds, in Trends in Welding Research, 9th International Conference (2012), pp. 193–200

15.

Z.Y. Liu, X.G. Li, C.W. Du, L. Lu, Y.R. Zhang, and Y.F. Cheng, Effect of Inclusions on Initiation of Stress Corrosion Cracks in X70 Pipeline Steel in an Acidic Soil Environment, Corros. Sci., 2009, 51(4), p 895–900. https://doi.org/10.1016/j.corsci.2009.01.007CrossRef

16.

H. Zhang, D. Wang, P. Xue, L.H. Wu, D.R. Ni, and Z.Y. Ma, Microstructural Evolution and Pitting Corrosion Behavior of Friction Stir Welded Joint of High Nitrogen Stainless Steel, Mater. Des., 2016, 110, p 802–810. https://doi.org/10.1016/j.matdes.2016.08.048CrossRef

17.

G. Khalaj and M.J. Khalaj, Investigating the Corrosion of the Heat-Affected Zones (HAZs) of API-X70 Pipeline Steels in Aerated Carbonate Solution by Electrochemical Methods, Int. J. Press. Vessel. Pip., 2016, 145, p 1–12CrossRef

18.

S. Bordbar, M. Alizadeh, and S.H. Hashemi, Effects of Microstructure Alteration on Corrosion Behavior of Welded Joint in API, X70 Pipeline Steel, Mater. Des., 2013, 45, p 597–604. https://doi.org/10.1016/j.matdes.2012.09.051CrossRef

19.

J.A. Avila, E. Lucon, J.W. Sowards, P.R. Mei, and A.J. Ramirez, Assessment of Ductile-to-Brittle Transition Behavior of Localized Microstructural Regions in a Friction-Stir Welded X80 Pipeline Steel with Miniaturized Charpy V-Notch Testing, Metall. Mater. Trans. A, 2016, 47(6), p 2855–2865CrossRef

20.

J. Avila, J. Rodriguez, P. Roberto, and A.J. Ramirez, Microstructure and Fracture Toughness of Multipass Friction Stir Welded Joints of API-5L-X80 Steel Plates, Mater. Sci. Eng. A, 2016, 673, p 257–265. https://doi.org/10.1016/j.msea.2016.07.045CrossRef

21.

W. Wang, R. Xu, Y. Hao, Q. Wang, L. Yu, Q. Che, J. Cai, K. Wang, and Z. Ma, Corrosion Fatigue Behavior of Friction Stir Processed Interstitial Free Steel, J. Mater. Sci. Technol., 2018, 34(1), p 148–156. https://doi.org/10.1016/j.jmst.2017.11.013CrossRef

22.

D.M. Sekban, S.M. Aktarer, and G. Purcek, Friction Stir Welding of Low-Carbon Shipbuilding Steel Plates: Microstructure, Mechanical Properties, and Corrosion Behavior, Metall. Mater. Trans. A, 2019, 50(9), p 4127–4140. https://doi.org/10.1007/s11661-019-05324-8CrossRef

23.

T.F.C. Hermenegildo, T.F.A. Santos, E.A. Torres, C.R.M. Afonso, and A.J. Ramirez, Microstructural Evolution of HSLA ISO 3183 X80M (API, 5L X80) Friction Stir Welded Joints, Met. Mater. Int., 2018, 24(5), p 1120–1132CrossRef

24.

J.A. Ávila, C.O.F.T. Ruchert, P.R. Mei, R.R. Marinho, M.T.P. Paes, and A.J. Ramirez, Fracture Toughness Assessment at Different Temperatures and Regions within a Friction Stirred API, 5L X80 Steel Welded Plates, Eng. Fract. Mech., 2015, 147, p 176–186CrossRef

25.

J.A. Avila, R.A.R. Giorjao, J. Rodriguez, E.B. Fonseca, and A.J. Ramirez, Modeling of Thermal Cycles and Microstructural Analysis of Pipeline Steels Processed by Friction Stir Processing, Int. J. Adv. Manuf. Technol., 2018, 98(9–12), p 2611–2618CrossRef

26.

L. Pan, C.T. Kwok, and K.H. Lo, Enhancement in Hardness and Corrosion Resistance of AISI, 420 Martensitic Stainless Steel via Friction Stir Processing, Surf. Coatings Technol., 2018, 2019(357), p 339–347

27.

G.K. Padhy, C.S. Wu, and S. Gao, Friction Stir Based Welding and Processing Technologies - Processes, Parameters, Microstructures and Applications: A Review, J. Mater. Sci. Technol., 2018, 34(1), p 1–38CrossRef

28.

American Society for Testing and Materials, ASTM E45-05 Standard Test Methods for Determining the Inclusion Content of Steel (2007), p. 19

29.

ASTM E3, E3-11 Standard Guide for Preparation of Metallographic Specimens 1, ASTM B. Stand. (2011), i(Reapproved), pp. 1–12

30.

ASTM E384, Standard Test Method for Microindentation Hardness of Materials, ASTM International (2017)

31.

J. Avila, J. Escobar, B. Cunha, W. Magalhães, P. Mei, J. Rodriguez, H. Pinto, and A. Ramirez, Physical Simulation as a Tool to Understand Friction Stir Processed X80 Pipeline Steel Plate Complex Microstructures, J. Mater. Res. Technol., 2018, https://doi.org/10.1016/j.jmrt.2018.09.009CrossRef

32.

S. Zajac, V. Schwinn, and K.H. Tacke, Characterisation and Quantification of Complex Bainitic Microstructures in High and Ultra-High Strength Linepipe Steels, Mater. Sci. Forum, 2009, 500–501, p 387–394

33.

G.A. Faria, Exploring Metallic Materials Behavior through in Situ Crystallographic Studies by Synchrotron Radiation, University of Campinas (2014)

34.

H. Tristijanto, M.N. Ilman, and P. Tri Iswanto, Corrosion Inhibition of Welded of X – 52 Steel Pipelines by Sodium Molybdate in 35% NaCl Solution, Egypt. J. Pet., 2020, https://doi.org/10.1016/j.ejpe.2020.02.001CrossRef

35.

E.E.E. Stansbury and R.A.A. Buchanan, Fundamentals of Electrochemical Corrosion, ASM International (2000)

36.

T.F.A. Santos, T.F.C. Hermenegildo, C.R.M. Afonso, R.R. Marinho, M.T.P. Paes, and A.J. Ramirez, Fracture Toughness of ISO 3183 X80M (API, 5L X80) Steel Friction Stir Welds, Eng. Fract. Mech., 2010, 77(15), p 2937–2945. https://doi.org/10.1016/j.engfracmech.2010.07.022CrossRef

37.

J.A. Avila, F.F. Conde, H.C. Pinto, J. Rodriguez, and F.A.F. Grijalba, Microstructural and Residuals Stress Analysis of Friction Stir Welding of X80 Pipeline Steel Plates Using Magnetic Barkhausen Noise, J. Nondestruct. Eval., 2019, 38(4), p 1–9. https://doi.org/10.1007/s10921-019-0625-2CrossRef

38.

T.N. Baker, S. Rahimi, B. Wei, K. He, and N.A. Mcpherson, Evolution of Microstructure During Double-Sided Friction Stir Welding of Microalloyed Steel (2019)

39.

Y. Wang, G. Cheng, W. Wu, and Y. Li, Role of Inclusions in the Pitting Initiation of Pipeline Steel and the Effect of Electron Irradiation in SEM, Corros. Sci., 2017, 2018(130), p 252–260. https://doi.org/10.1016/j.corsci.2017.10.029CrossRef

40.

T.Y. Jin and Y.F. Cheng, In Situ Characterization by Localized Electrochemical Impedance Spectroscopy of the Electrochemical Activity of Microscopic Inclusions in an X100 Steel, Corros. Sci., 2011, 53(2), p 850–853. https://doi.org/10.1016/j.corsci.2010.11.026CrossRef

41.

J.M. Quispe-Avilés, D. Hincapie-Ladino, N.A. Falleiros, and H.G. de Melo, A Comparative Investigation of the Corrosion Resistance and HIC Suceptibility of API, 5L X65 and API, 5L X80 Steels, Mater. Res., 2019, 22(1), p 1–13CrossRef

42.

L. Sharma and R. Chhibber, Microstructure Evolution and Electrochemical Corrosion Behaviour of API, X70 Linepipe Steel in Different Environments, Int. J. Press. Vessel. Pip., 2019, 171(January), p 51–59. https://doi.org/10.1016/j.ijpvp.2019.01.013CrossRef

43.

M. Alizadeh and S. Bordbar, The Influence of Microstructure on the Protective Properties of the Corrosion Product Layer Generated on the Welded API, X70 Steel in Chloride Solution, Corros. Sci., 2013, 70, p 170–179. https://doi.org/10.1016/j.corsci.2013.01.026CrossRef

44.

C.W. Du, X.G. Li, P. Liang, Z.Y. Liu, G.F. Jia, and Y.F. Cheng, Effects of Microstructure on Corrosion of X70 Pipe Steel in an Alkaline Soil (2009) 18(March), pp. 216–220

45.

N. Ochoa, C. Vega, N. Pébère, J. Lacaze, and J.L. Brito, CO2 Corrosion Resistance of Carbon Steel in Relation with Microstructure Changes, Mater. Chem. Phys., 2015, 156, p 198–205CrossRef

46.

J.R. da Cruz and R. Bertazzoli, Characterization of Corrosion Within Friction Stir Weld Zones of an API, X-70 Steel Using a Novel Microcell Setup, J. Mater. Eng. Perform., 2020, 29(1), p 98–108. https://doi.org/10.1007/s11665-019-04531-zCrossRef

47.

A. Di Schino and J.M. Kenny, Effects of the Grain Size on the Corrosion Behavior of Refined AISI, 304 Austenitic Stainless Steels, J. Mater. Sci. Lett., 2002, 21(20), p 1631–1634CrossRef

48.

K.M. Deen, R. Ahmad, I.H. Khan, and Z. Farahat, Microstructural Study and Electrochemical Behavior of Low Alloy Steel Weldment, Mater. Des., 2010, 31(6), p 3051–3055. https://doi.org/10.1016/j.matdes.2010.01.025CrossRef

49.

W. Liu, H. Pan, L. Li, H. Lv, Z. Wu, F. Cao, and J. Zhu, Corrosion Behavior of the High Strength Low Alloy Steel Joined by Vertical Electro-Gas Welding and Submerged Arc Welding Methods, J. Manuf. Process., 2017, 25, p 418–425. https://doi.org/10.1016/j.jmapro.2016.12.011CrossRef

Titel: Corrosion Behavior and Microstructural Characterization of Friction Stir Welded API X70 Steel
verfasst von: J. M. Giarola
J. W. Calderón-Hernández
F. F. Conde
J. B. Marcomini
H. G. de Melo
J. A. Avila
W. W. Bose Filho
Publikationsdatum: 30.03.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 8/2021
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-05640-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2021

In Situ Investigation of the Solidification of Al-20 wt.% Zn Alloys Inoculated by Al-5Ti-1B

Effect of Fe Content on the Microstructure and Mechanical and Electrical Properties of Cu-Fe In Situ Composites

A Comprehensive Study of the Washcoating of MCM-41 on Stainless Steel Tubular Microreactors

Study on Fatigue Crack Propagation and Fracture Characterization of 7050-T7451 Friction Stir Welded Joints

Research on the Corrosion Behavior of Ni-SiC Nanocoating Prepared Using a Jet Electrodeposition Technique

Effect of Process Parameters on the Hardness of Laser Surface Textured 5A06 Aluminum Alloy

Premium Partner

Marktübersichten