nach oben

Cellulose

Erschienen in:

16.03.2022 | Original Research

Crystalline nanocellulose based sustainable nanoscopic composite membrane production: removal of metal ions from water

verfasst von: Lau Kia Kian, Hassan Fouad, Mohammad Jawaid, Zoheb Karim

Erschienen in: Cellulose | Ausgabe 7/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Most polymer membranes employed for water decentralization have petroleum-based building blocks, indeed, have significant drawbacks like non-renewable resources, complex and costly processing and untailored surfaces. Hence, an urgent need of a robust, sustainable, biodegradable and tunable nano/micro material is required which could be used as functional and structural building martials for production of polymeric membranes for water purification. So, high-grade crystalline forms of cellulose (NCC and CNW) have been used as functional materials for the production of active hybrid membranes using poly(D-lactic acid) (PDLA) as matrix for separation of metal ions. Furthermore, effect of structural and functional properties of these nanoscale particles were analyzed with respect to networking potential, physicochemicals properties, and performance of fabricated sustainable hybrid membranes. Indeed, NCCs and CNWs based PDLA membranes have high porosity compared to pristine PDLA membrane. Furthermore, the CNWs hybrid membranes revealed high interconnected networking potential. In parallel, CNW particle have greater interfacial adhesion with PDLA compared to its NCC counterpart. High percentage removal of ions (74% for Co²⁺ and 76% for Ni²⁺) was reported when hybrid membrane of 1wt% CNW was tested in continuous crossflow mode. Furthermore, recovery of water flux was reported after cleaning of composite membranes. Thus, produced hybrid membranes are next generation prototype design of high-performance filtration device and a necessitated push for a sustainable society.

Graphical abstract

Vorheriger Artikel Highly-efficient isolation of microcrystalline cellulose and nanocellulose from sunflower seed waste via environmentally benign method

Nächster Artikel Fabrication and characterization of electrospun polyacrylonitrile (PAN) @ bamboo shoot cellulose nanowhisker (BSCNs) @ carbon nanotube (CNT) composite membrane with enhanced dye adsorption properties

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Ai J, Yang L, Liao G, Xia H, Xiao F (2018) Applications of graphene oxide blended poly(vinylidene fluoride) membranes for the treatment of organic matters and its membrane fouling investigation. Appl Surf Sci 455:502–512. https://doi.org/10.1016/j.apsusc.2018.05.162CrossRef

Arjmandi R, Hassan A, Haafiz MKM, Zakaria Z, Islam MS (2016) Effect of hydrolysed cellulose nanowhiskers on properties of montmorillonite/polylactic acid nanocomposites. Int J Biol Macromol 82:998–1010. https://doi.org/10.1016/j.ijbiomac.2015.11.028CrossRefPubMed

Bai H, Zhou Y, Zhang L (2015) Morphology and mechanical properties of a new nanocrystalline cellulose/polysulfone composite membrane. Adv Polym Technol 34:56–67. https://doi.org/10.1002/adv.21471CrossRef

Borkotoky SS, Dhar P, Katiyar V (2018) Biodegradable poly (lactic acid)/cellulose nanocrystals (CNCs) composite microcellular foam: effect of nanofillers on foam cellular morphology, thermal and wettability behavior. Int J Biol Macromol 106:433–446. https://doi.org/10.1016/j.ijbiomac.2017.08.036CrossRefPubMed

Chinyerenwa AC, Wang H, Zhang Q, Zhuang Y, Munna KH, Ying C, Yang H, Xu W (2018) Structure and thermal properties of porous polylactic acid membranes prepared via phase inversion induced by hot water droplets. Polymer 141:62–69. https://doi.org/10.1016/j.polymer.2018.03.011CrossRef

Fan T, Li Z, Cheng B, Li J (2018) Preparation, characterization of PPS micro-porous membranes and their excellent performance in vacuum membrane distillation. J Membr Sci 556:107–117. https://doi.org/10.1016/j.memsci.2018.03.084CrossRef

Gao A, Liu F, Shi H, Xue L (2015) Controllable transition from finger-like pores to inter-connected pores of PLLA membranes. J Membr Sci 478:96–104. https://doi.org/10.1016/j.memsci.2015.01.004CrossRef

Goetz LA, Jalvo B, Rosal R, Mathew AP (2016) Superhydrophilic anti-fouling electrospun cellulose acetate membranes coated with chitin nanocrystals for water filtration. J Membr Sci 510:238–248. https://doi.org/10.1016/j.memsci.2016.02.069CrossRef

Guillen GR, Pan Y, Li M, Hoek EMV (2011) Preparation and characterization of membranes formed by nonsolvent induced phase separation: a review. Ind Eng Chem Res 50:3798–3817. https://doi.org/10.1021/ie101928rCrossRef

Haafiz MKM, Hassan A, Khalil HPSA, Khan I, Inuwa IM, Islam MS, Hossain MS, Syakir MI, Fazita MRN (2015) Bionanocomposite based on cellulose nanowhisker from oil palm biomass-filled poly(lactic acid). Polym Test 48:133–139. https://doi.org/10.1016/j.polymertesting.2015.10.003CrossRef

Han Z, Xiao KO, Li YY (2021) Adsorption of lead ions from aqueous solutions by porous cellulose nanofiber–sodium alginate hydrogel beads. J Mol Liq 324:115122. https://doi.org/10.1016/j.molliq.2020.115122CrossRef

Hussein AK (2015) Applications of nanotechnology in renewable energies: a comprehensive overview and understanding. Renew Sustain Energy Rev 42:460–476. https://doi.org/10.1016/j.rser.2014.10.027CrossRef

Jian S, Fangyuan J, Nan W, Xiao KO, Mi-cong J (2021a) Diethylenetriaminepentaacetic acid (DPTA)-modified magnetic cellulose nanocrystals can efficiently remove Pb(II) from aqueous solution. J Polym Environ. https://doi.org/10.1007/s10924-021-02278-0CrossRef

Jian S, Xinyi X, Xiao KO, Mi-cong J (2021b) Adsorption of Pb(II) from aqueous solutions using nanocrystalline cellulose/sodium alginate/k-carrageenan composite hydrogel beads. J Polym Environ. https://doi.org/10.1007/s10924-021-02334-9CrossRef

Jianlong L, Lijuan Z, Yingkun S, Xin Y, Xiaolin L, Yunxiao L, Zhanrui Z, Yuan Y, Shouke Y, Jianming Z (2021) Green fabrication of porous microspheres containing cellulose nanocrystal/MnO₂ nanohybrid for efficient dye removal. Carbohydr Polym 270:118340. https://doi.org/10.1016/j.carbpol.2021.118340CrossRef

Karim Z, Monti S (2021) Microscopic hybrid membranes made of cellulose-based materials tuned for removing metal ions from industrial effluents. ACS Appl Polym Mater 3(8):3733–3746. https://doi.org/10.1021/acsapm.1c00105CrossRef

Karim Z, Claudpierre S, Grahn M, Oksman K, Mathew AP (2016) Nanocellulose based functional membranes for water cleaning: tailoring of mechanical properties, porosity and metal ion capture. J Membr Sci 514:418–428. https://doi.org/10.1016/j.memsci.2016.05.018CrossRef

Karim Z, Hakalahti M, Tammelin T, Mathew AP (2017) In situ surface functionalization of nanocellulose membranes for enhanced adsorption of metal ions from aqueous medium. RSC Adv 7:5232–5241. https://doi.org/10.1039/C6RA25707KCrossRef

Karim Z, Monti S, Barcaro G, Svedberg A, Ansari MA, Afrin S (2020) Enhanced sieving of cellulosic microfibers membranes via tuning of interlayer spacing. Environ Sci Nano 7:2941–2952. https://doi.org/10.1039/D0EN00613KCrossRef

Kian LK, Jawaid M, Ariffin H, Alothman OY (2017) Isolation and characterization of microcrystalline cellulose from roselle fibers. Int J Biol Macromol 103:931–940. https://doi.org/10.1016/j.ijbiomac.2017.05.135CrossRefPubMed

Kian LK, Jawaid M, Ariffin H, Karim Z (2018) Isolation and characterization of nanocrystalline cellulose from roselle-derived microcrystalline cellulose. Int J Biol Macromol 114:54–63. https://doi.org/10.1016/j.ijbiomac.2018.03.065CrossRefPubMed

Li Y, Huang S, Zhou S, Fane AG, Zhang Y, Zhao S (2018a) Enhancing water permeability and fouling resistance of polyvinylidene fluoride membranes with carboxylated nanodiamonds. J Membr Sci 556:154–163. https://doi.org/10.1016/j.memsci.2018.04.004CrossRef

Li Y, Su K, Fan T, Cao L (2018b) Mussel-inspired modification of PPS membrane to separate and remove the dyes from the wastewater. Chem Eng J 341:371–382. https://doi.org/10.1016/j.cej.2018.02.048CrossRef

Liu C, Jin RN, Ouyang XK, Wang YG (2017) Adsorption behavior of carboxylated cellulose nanocrystal—polyethyleneimine composite for removal of Cr(VI) ions. Appl Surf Sci 408:77–87. https://doi.org/10.1016/j.apsusc.2017.02.265CrossRef

Luna L, Shuyang Z, Gabriel AG, Xianzhi M, Thomas AZ, Art JR (2020) Chemically cross-linked cellulose nanocrystal aerogels for effective removal of cation dye. Front Chem 7(8):570. https://doi.org/10.3389/fchem.2020.00570CrossRef

Ma H, Burger C, Hsiao BS, Chu B (2011) Ultrafiltration polysaccharide nanofibrous membranes for water purification. Biomacromolecules 12:970–976. https://doi.org/10.1021/bm1013316CrossRefPubMed

Mi HY, Jing X, Peng J, Salick MR, Peng XF, Turng LS (2014) Poly(e-caprolactone) (PCL)/cellulose nano-crystal (CNC) nanocomposites and foams. Cellulose 21:392–398. https://doi.org/10.1007/s10570-014-0327-yCrossRef

Phaechamud T, Chitrattha S (2016) Pore formation mechanism of porous poly(DL-lactic acid) matrix membrane. Mater Sci Eng C 61:744–752. https://doi.org/10.1016/j.msec.2016.01.014CrossRef

Planellas M, Sacristán M, Rey L, Olmo C, Aymamí J, Casas MT, Valle LJ, Franco L, Puiggalí J (2014) Micro-molding with ultrasonic vibration energy: new method to disperse nanoclays in polymer matrices. Ultrason Sonochem 21:1557–1569. https://doi.org/10.1016/j.ultsonch.2013.12.027CrossRefPubMed

Qian S, Sheng K (2017) PLA toughened by bamboo cellulose nanowhiskers: role of silane compatibilization on the PLA bionanocomposite properties. Compos Sci Technol 148:59–69. https://doi.org/10.1016/j.compscitech.2017.05.020CrossRef

Qu X, Alvarez PJJ, Li Q (2013) Applications of nanotechnology in water and wastewater treatment. Water Res 47(12):3931–3946. https://doi.org/10.1016/j.watres.2012.09.058

Quellmalz A, Mihranyan A (2015) Citric acid cross-linked nanocellulose based paper for size-exclusion nanofiltration. ACS Biomater Sci Eng 1:271–276. https://doi.org/10.1021/ab500161xCrossRefPubMed

Shannon MA, Bohn PW, Elimelech M, Georgiadis JG, Marinas BJ, Mayes AM (2008) Science and technology for water purification in the coming decades. Nature 452:301–310. https://doi.org/10.1038/nature06599CrossRefPubMed

Sung SH, Chang Y, Han J (2017) Development of polylactic acid nanocomposite films reinforced with cellulose nanocrystals derived from coffee silverskin. Carbohydr Polym 169:495–503. https://doi.org/10.1016/j.carbpol.2017.04.037CrossRefPubMed

Tanaka T, Nishimoto T, Tsukamoto K, Yoshida M, Kouya T, Taniguchi M, Lloyd DR (2012) Formation of depth filter microfiltration membranes of poly(l-lactic acid) via phase separation. J Membr Sci 396:101–109. https://doi.org/10.1016/j.memsci.2012.01.002CrossRef

Tawil EA, Monnier A, Nguyen QT, Deschrevel B (2018) Microarchitecture of poly(lactic acid) membranes with an interconnected network of macropores and micropores influences cell behavior. Eur Polym J 105:370–388. https://doi.org/10.1016/j.eurpolymj.2018.06.012CrossRef

Teow YH, Kam LM, Mohammad AW (2018) Synthesis of cellulose hydrogel for copper (II) ions adsorption. J Environ Chem Eng 6:4588–4597. https://doi.org/10.1016/j.jece.2018.07.010CrossRef

Wang L, Ando M, Kubota M, Ishihara S, Hikima Y, Ohshima M, Sekiguchi T, Sato A, Yano H (2017) Effects of hydrophobic-modified cellulose nanofibers (CNFs) on cell morphology and mechanical properties of high void fraction polypropylene nanocomposite foams. Compos Part A 98:166–173. https://doi.org/10.1016/j.compositesa.2017.03.028CrossRef

Warsinger D, Chakraborty S, Tow EW, Plumlee MH, Bellona C, Loutatidou S, Karimi L, Mikelonis AM, Achilli A, Ghassemi A (2016) A review of polymeric membranes and processes for potable water reuse. Prog Polym Sci 81:209–237. https://doi.org/10.1016/j.progpolymsci.2018.01.004CrossRefPubMedPubMedCentral

Xiong Z, Zhong Y, Lin H, Liu F, Li T, Li J (2017) PDLA/PLLA ultrafiltration membrane with excellent permeability, rejection and fouling resistance via stereocomplexation. J Membr Sci 533:103–111. https://doi.org/10.1016/j.memsci.2017.03.028CrossRef

Xu Y, Li Z, Su K, Fan T, Cao L (2018) Mussel-inspired modification of PPS membrane to separate and remove the dyes from the wastewater. Chem Eng J 341:371-382. https://doi.org/10.1016/j.cej.2018.02.048

Yu B, Meng L, Fu S, Zhao Z, Liu Y, Wang K, Fu Q (2018) Morphology and internal structure control over PLA microspheres by compounding PLLA and PDLA and effects on drug release behavior. Colloids Surf B 172:105–112. https://doi.org/10.1016/j.colsurfb.2018.08.037CrossRef

Zhao HH, Ahmed MO, Xiao KO, Di Y (2018) Fabrication of carboxylated cellulose nanocrystal/sodium alginate hydrogel beads for adsorption of Pb(II) from aqueous solution. Int J Biol Macromol 108:149–157. https://doi.org/10.1016/j.ijbiomac.2017.11.171CrossRef

Titel: Crystalline nanocellulose based sustainable nanoscopic composite membrane production: removal of metal ions from water
verfasst von: Lau Kia Kian
Hassan Fouad
Mohammad Jawaid
Zoheb Karim
Publikationsdatum: 16.03.2022
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 7/2022
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-022-04494-w

Springer Professional

Abstract

Graphical abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 7/2022

Eco-friendly dyeing of cationised cotton with reactive dyes: mechanism of bonding reactive dyes with CHPTAC cationised cellulose

Suspensions and hydrogels of cellulose nanocrystals (CNCs): characterization using microscopy and rheology

Copper ion-imprinted bacterial cellulose for selectively removing heavy metal ions from aqueous solution

Process optimization and comprehensive utilization of recyclable deep eutectic solvent for the production of ramie cellulose fibers

Influence of delignification on plastic flow deformation of wood

Structure, physicochemical properties, and adsorption performance of the ethyl cellulose/bentonite composite films