nach oben

Electrical Engineering

Erschienen in:

20.07.2018 | Original Paper

Design and analysis of radiaxial induction motor

verfasst von: Uğur Demir, Mustafa Caner Aküner

Erschienen in: Electrical Engineering | Ausgabe 4/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, design and analysis studies of an asynchronous motor with a tapered geometry for a two-person electric vehicle were carried out. The goal of this study is to analyze change in the taper angle for this asynchronous motor in terms of the power factor, efficiency, starting torque, breakdown torque, and rated torque. First, the vehicle dynamics and the asynchronous motor structure were analyzed. Then, axial, radial, and hybrid (radiaxial) flux electric motor models and the purpose of these models were investigated. Literature studies have shown that there is no work related to angle optimization for a radiaxial flux with a conical geometry hybrid structure for an asynchronous motor. The required motor characteristics for a two-person electric vehicle have been calculated. Then, the package volume for the in-wheel motor was analyzed, and the maximum diameter and length of the asynchronous motor were determined. The minimum diameter of this engine package was also specified considering magnetic limit conditions such as saturation factor for rotor and stator of the asynchronous motor. Nine asynchronous motor models were designed and analyzed considering the maximum and minimum motor diameters to investigate the optimal taper angle of this asynchronous motor. And the results were discussed and evaluated.

Vorheriger Artikel Oscillatory stability and eigenvalue analysis of power system with microgrid

Nächster Artikel Study of kinematic viscosity of mixture oils under thermal aging in power transformer

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Ahmad MZ, Sulaiman E, Kosaka T (2015) Optimization of outer-rotor hybrid excitation FSM for in-wheel direct drive electric vehicle. In: 2015 IEEE international conference on mechatronics (ICM), pp 091–090, 6-8 March 2015. [Online]. https://doi.org/10.1109/ICMECH.2015.7084061

Sant A, Khadkikar V, Xiao W, Zeineldin H (2015) Four-axis vector-controlled dual-rotor PMSM for plug-in electric vehicles. IEEE Trans Ind Electron 62(5):3202–3212. https://doi.org/10.1109/TIE.2014.2387094 CrossRef

Chiba A, Kiyota K, Hoshi N, Takemoto M, Ogasawara S (2015) Development of a rare-earth-free SR motor with high torque density for hybrid vehicles. IEEE Trans Energy Convers 30(1):175–182. https://doi.org/10.1109/TEC.2014.2343962 CrossRef

Chen L, Hopkinson D, Wang J, Cockburn A, Sparkes M, O’Neill W (2015) Reduced dysprosium permanent magnets and their applications in electric vehicle traction motors. IEEE Trans Magn. https://doi.org/10.1109/TMAG.2015.2437373 CrossRef

Biltutanu A, Florea ML (2015) Modeling and testing of electric vehicle propulsion systems. UPB Sci Bull Ser C Electr Eng 77(3):201–212

Al-Aawar N, Arkadan ARA (2015) Optimal control strategy for hybrid electric vehicle powertrain. IEEE J Emerg Sel Top Power Electron 3(2):362–370. https://doi.org/10.1109/JESTPE.2014.2323019 CrossRef

Hua W, Zhang G, Cheng M (2015) Investigation and design of a high-power flux-switching permanent magnet machine for hybrid electric vehicles. Magn IEEE Trans 51(3):1–5. https://doi.org/10.1109/TMAG.2014.2345732 CrossRef

Chun YD, Park BG, Kim DJ, Choi JH, Han PW (2016) Development and performance investigation on 60 kW induction motor for EV propulsion. J Electr Eng Technol 11(3):639–643. https://doi.org/10.5370/JEET.2016.11.1.1921 CrossRef

Ruuskanen V, Nerg J, Pyrhönen J, Ruotsalainen S, Kennel R (2015) Drive cycle analysis of a permanent-magnet traction motor based on magnetostatic finite-element analysis. IEEE Trans Vech Technol 64(3):1249–1254. https://doi.org/10.1109/TVT.2014.2329014 CrossRef

10.

Yang Y-P, Wang J-P, Wu S-W, Luh Y-P (2004) Design and control of axial-flux brushless DC wheel motors for electric vehicles-part II: optimal current waveforms and performance test. IEEE Trans Magn 40(4):1883–1891. https://doi.org/10.1109/TMAG.2004.828165 CrossRef

11.

Rahman KM, Jurkovic S, Stancu C, Morgante J, Savagian PJ (2015) Design and performance of electrical propulsion system of extended range electric vehicle (EREV) chevrolet volt. IEEE Trans Ind Appl. https://doi.org/10.1109/TIA.2014.2363015 CrossRef

12.

Shafiei A, Carli G, Williamson SS (2014) Electric and plug-in hybrid electric vehicles”, power electronics for renewable energy systems, transportation and industrial applications. Wiley-IEEE press, Hoboken, pp 387–421

13.

Hewu W, Jiuyu D, Minggao O (2013) Vehicle powertrain technology, sustainable automotive energy system in China. Springer, Berlin, pp 59–107CrossRef

14.

Beloiu R, Iorgulescu M, Savulescu C (2014) Dynamic response of electric machines for electric vehicles/hybrid electric vehicles (EV/HEV). In: Autonomous vehicles: intelligent transport systems and smart technologies. Nova Science Publisher, New York, pp 353–377

15.

Nam KH (2010) AC motor control and electrical vehicle applications. CRC Press, Florida, p 351

16.

Mökükcü MS (2014) Electrical vehicle design and implementation, M.Sc. Thesis, Istanbul Technical University, Istanbul

17.

Chapman SJ (2003) Electric machinery fundamentals, 4th edn. McGraw-Hill Science, New York, p 773

18.

Flogvall AG (1986) Motor arrangement comprising at least three co-planar conical motors. US Philips Corp, US4628220 (A)

19.

Mohamed AM, Emad FP (1992) Conical magnetic bearings with radial and thrust control. IEEE Trans Autom Control 37(12):1859–1868. https://doi.org/10.1109/9.182473 CrossRefMATH

20.

Lin L-C, Gau T-B (1997) Feedback linearization and fuzzy control for conical magnetic bearings. IEEE Trans Control Syst Technol 5(4):417–426. https://doi.org/10.1109/87.595923 CrossRef

21.

Luo J, Huang S, Chen S, Lipo TA (2001) Design and experiments of a novel axial flux circumferential current permanent magnet (AFCC) machine with radial airgap. IEEE-IAS Conf Rec 2:2001. https://doi.org/10.1109/IAS.2001.955901 CrossRef

22.

Tenhunen A, Benedetti T, Holopainen TP, Arkkio A (2003) Electromagnetic forces of the cage rotor in conical whirling motion. IEE Proc Electr Power Appl. https://doi.org/10.1049/ip-epa:20030365 CrossRef

23.

Parviainen A, Niemelä M, Pyrhönen J, Mantere LJ (2005) Performance comparison between low-speed axial-flux and radial-flux permanent magnet machines including mechanical constraints. IEEE Int Electr Mach Drives Conf. https://doi.org/10.1109/IEMDC.2005.195948 CrossRef

24.

Kascak P, Jansen R, Dever T (2006) Conical bearingless motor/generator. University of Toledo, US2006238053 (A1)

25.

Zhao H, Li L, Zheng P, Liu R, Zhao J (2008) Research on the axial–radial flux compound-structure permanent-magnet synchronous machine (CSPMSM) used for HEV. In: Proceedings international conference electrical machine system, pp 3250–3253

26.

Pillai KPP, Nair S, Bindu GR (2008) Unbalanced magnetic pull in train-lighting brushless alternators with static eccentricity. IEEE Trans Vech Technol 57(1):120–126. https://doi.org/10.1109/TVT.2007.901966 CrossRef

27.

Kascak P, Jansen R, Dever T, Nagorny A, Loparo K (2009) Bearingless five-axis rotor levitation with two pole pair separated conical motors. In: Conference record of IEEE industrial applications society annual meeting, October 2009. [Online]. https://doi.org/10.1109/IAS.2009.5324866

28.

Song F, Liu H, Song B, Shao H, Feng H (2010) Analysis control characteristics of clearance control magnetic dynamic absorber. In: Proceedings of the 8th world congress on intelligent control and automation, IEEE. [Online]. https://doi.org/10.1109/WCICA.2010.5554572

29.

Li W, Song C, Cao J, Li L (2010) Performance analysis of axial-radial flux type fully superconducting synchronous motor. In: 2010 international conference on power system technology (POWERCON), IEEE. [Online]. https://doi.org/10.1109/POWERCON.2010.5666101

30.

Alfermann TJ, McGrew AL, El-Antably AM (2010) Permanent magnet machine with conical stator. GM Global Technology Operations LLC, US2010264768 (A1)

31.

Ghıta C, Trifu I (2011) Aeolian synchronous generator with conical rotor. In: 7th International symposium on advanced topics in electrical engineering, the Faculty of Electrical Engineering, U.P.B., Bucharest

32.

Ghıta C, Trifu I (2011) Linearization of aeolian synchronous generator with conical rotor. In: 7th international symposium on advanced topics in electrical engineering, The Faculty of Electrical Engineering, U.P.B., Bucharest

33.

Kascak P, Jansen R, Dever T, Nagorny A, Loparo K (2011) Levitation performance of two opposed permanent magnet pole-pair separated conical bearingless motors. In: Conference record of the ieee energy conversion congress and exposition, Phoenix, AZ, September 2011. [Online]. https://doi.org/10.1109/ECCE.2011.6063980

34.

Kascak P, Dever T, Jansen R, Nagorny A, Loparo K (2011) Motoring performance of a conical pole-pair separated bearingless electric machine. In: Conference record of IEEE energy tech, May 2011. [Online]. https://doi.org/10.1109/EnergyTech.2011.5948515

35.

Nasiri-Gheidari Z, Lesani H (2012) A survey on axial flux induction motors. Przeglad Elektrotechniczny (Electrical Review), ISSN 0033-2097, R. 88 NR 2/2012

36.

Nair SS, Shamsuddeen N, Dhinagar SJ (2012) A novel electromagnetic core structure for axial radial flux permanent magnet electric motor. In: 6th IET international conference on power electronics, machines and drives (PEMD 2012), IEEE 2012. [Online]. https://doi.org/10.1049/cp.2012.0163

37.

Munteanu G, Binder A, Dewenter S (2012) Five-axis magnetic suspension with two conical air gap bearingless PM synchronous half-motors. In: Proceedings of the 2012 international symposium on power electronics electrical drives automation and motion (SPEEDAM), June 20–22, 2012. [Online], pp 1246–1251. https://doi.org/10.1109/SPEEDAM.2012.6264414

38.

Shepard C, Picard JW (2013) Tapered rotor assembly. Hamilton Sundstrand Corp, US2013113324 (A1)

39.

Wei X, Yang K, Pan Z, Xie H, Zhu C, Zhang Y (2014) Design of a novel axial-radial flux permanent magnet motor. In: 17th international conference on electrical machines and systems (ICEMS), IEEE 2014. [Online]. https://doi.org/10.1109/ICEMS.2014.7013441

40.

Xu S, Sun J (2014) Decoupling structure for heteropolar permanent magnet biased radial magnetic bearing with subsidiary air-gap. IEEE Trans Magn 50(8):1–8. https://doi.org/10.1109/TMAG.2014.2312396 CrossRef

41.

Abrahamsson J, Ogren J, Hedlund M (2014) A fully levitated cone-shaped Lorentz-type self-bearing machine with skewed windings. IEEE Trans Mag 50(9):1–9. https://doi.org/10.1109/TMAG.2014.2321104 CrossRef

42.

Li S, Song L, Li S, Wang J, Lei X (2015) Decoupling active and passive hybrid axial and radial magnetic bearing. In: International conference on control, automation and information sciences (ICCAIS), IEEE 2015. [Online]. https://doi.org/10.1109/ICCAIS.2015.7338701

43.

Seo JM, Rhyu SH, Jung IS, Jung HK (2015) A design of multi flux permanent magnet machine for electrical bicycles. IEEE Trans Magn. https://doi.org/10.1109/ICPE.2015.7167970 CrossRef

44.

Ro J-S, Rhyu S-H, Jung I-S, Jung H-K, Seo JM (2015) Novel hybrid radial and axial flux permanent-magnet machine using integrated windings for high-power density. IEEE Trans Magn Magn. https://doi.org/10.1109/TMAG.2014.2344044 CrossRef

45.

Yang G (2015) Method for improving motor torque density and radial and axial magnetic flux parallel-connected permanent magnet motor. Wuhan Huada New Motor Technology Co., Ltd., CN104716754A

46.

Guo B, Huang Y, Guo Y, Zhu J (2015) Thermal analysis of the conical rotor motor using LPTN combined with fluid simulation. In: Proceedings of international conference on applied superconductivity and electromagnetic devices, IEEE 2015. [Online]. https://doi.org/10.1109/ASEMD.2015.7453499

47.

Guo B, Huang Y, Guo Y, Zhu J (2016) Thermal analysis of the conical rotor motor using LPTN with accurate heat transfer coefficients. In: Transaction on applied superconductivity, IEEE 2016. [Online], vol 26(7). https://doi.org/10.1109/TASC.2016.2600584

48.

Nasiri-Zarandi R, Mirsalim M, Tenconi A (2016) A novel hybrid hysteresis motor with combined radial and axial flux rotors. IEEE Trans Ind Electron 63:1684–1693. https://doi.org/10.1109/TIE.2015.2498142 CrossRef

49.

Messager G, Binder A (2016) Observer-based pole placement control for a double conical high-speed bearingless permanent magnet synchronous motor. In: Power Electronics and Applications (EPE’16 ECCE Europe), IEEE 2016. https://doi.org/10.1109/EPE.2016.7695264

50.

Roggia S, Cupertino F, Gerada C, Galea M (2017) Axial position estimation of conical shaped motors for aerospace traction application. In: Transaction on industrial applications, IEEE 2017. [Online]. https://doi.org/10.1109/TIA.2017.2717911 CrossRef

51.

Basheer J, Bindu GR (2017) A novel technique to arrest unbalanced magnetic pull due to conical motion in three phase induction motor using feedforward control, In: International conference on nascent technologies in the engineering field (ICNTE-2017). [Online]. https://doi.org/10.1109/ICNTE.2017.7947908

52.

Chai F, Zhao K, Li Z, Gan L (2017) Flux weakening performance of permanent magnet synchronous motor with a conical rotor. In: Transaction on magnetics, IEEE 2017. [Online]. https://doi.org/10.1109/TMAG.2017.2708139

53.

Vehicle Dynamic Parameters (2018). Retrived from https://www.platinumrenault.co.uk/pdfs/new-cars/twizy.pdf

Titel: Design and analysis of radiaxial induction motor
verfasst von: Uğur Demir
Mustafa Caner Aküner
Publikationsdatum: 20.07.2018
Verlag: Springer Berlin Heidelberg
Erschienen in: Electrical Engineering / Ausgabe 4/2018
Print ISSN: 0948-7921
Elektronische ISSN: 1432-0487
DOI: https://doi.org/10.1007/s00202-018-0708-6

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Nachhaltigkeitsaward Key Visual/© Cometis AG/Global ESG Monitor | Daniel Rupp | Generiert mit KI, Search Icon, Banner Hanser, Jonas Klose/© Pine Valley Capital GmbH, Carina Kießling von der Strategieberatung Roland Berger/© Monika Walther Fotografie | ATZ, Beijing Auto Show 2024: Deutsche Hersteller wollen angreifen./© EKH-Pictures / Generated with AI / Stock.adobe.com, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence 2024/© AndreyPopov / Getty Images / iStock, 2023_Antrieb/© supervisuell, ATZ-Webinar: Prototypenfreie Entwicklung durch Offline- und Driver-in-the-Loop-HiL-Tests /© (c) VI-grade

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 4/2018

Multi-objective fuzzy-decision-making-based FS-MPC with improved performance for grid-connected converters

A new analytical approach for design of current and speed controllers in electrical motor drives

Optimisation and design comparison of 10-kW and 3-MW PM flux-switching machines for geared medium-speed wind power generators

Distribution network reinforcement planning in uncertain environment using stochastic multi-attribute utility analysis

An efficient optimal power flow using bisection method

Robust dynamic fuzzy-based enhanced VPD/FQB controller for load sharing in microgrid with distributed generators

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.