The elasticity in cloud is essential to the effective management of computational resources as it enables readjustment at runtime to meet application demands. Over the years, researchers and practitioners have proposed many auto-scaling solutions using versatile techniques ranging from simple if-then-else based rules to sophisticated optimisation, control theory and machine learning based methods. However, despite an extensive range of existing elasticity research, the aim of implementing an efficient scaling technique that satisfies the actual demands is still a challenge to achieve. The existing methods suffer from issues like: (1) the lack of adaptability and static scaling behaviour whilst considering completely fixed approaches; (2) the burden of additional computational overhead, the inability to cope with the sudden changes in the workload behaviour and the preference of adaptability over reliability at runtime whilst considering the fully dynamic approaches; and (3) the lack of considering uncertainty aspects while designing auto-scaling solutions. In this paper, we aim to address these issues using a holistic biologically-inspired feedback switch controller. This method utilises multiple controllers and a switching mechanism, implemented using fuzzy system, that realises the selection of suitable controller at runtime. The fuzzy system also facilitates the design of qualitative elasticity rules. Furthermore, to improve the possibility of avoiding the oscillatory behaviour (a problem commonly associated with switch methodologies), this paper integrates a biologically-inspired computational model of action selection. Lastly, we identify seven different kinds of real workload patterns and utilise them to evaluate the performance of the proposed method against the state-of-the-art approaches. The obtained computational results demonstrate that the proposed method results in achieving better performance without incurring any additional cost in comparison to the state-of-the-art approaches.
Hinweise
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
1 Introduction
The pool of virtually unlimited on-demand computational resources, provided by cloud providers (CPs), and many attractive features of cloud computing, such as pay-as-you-go pricing and on-the-fly re-adjustment of hired computational resources (elasticity), is a perfect match to host web applications that are subject to fluctuating workload conditions [1, 2]. The cloud’s elasticity allows applications to dynamically adjust the underlying computational resources in response to the changes observed in the environment, thus enabling application service providers (SPs) to meet application demands and pay only for the resources that are necessary [3].
Over the years, researchers and practitioners have proposed many elastic methods using versatile techniques including but not limited to rule-based [4‐8], control theory [9‐13], fuzzy logic [14, 15], optimisation [16‐18] and machine learning [19, 20]. However, despite a large range of existing elasticity research work, the aim of implementing an efficient scaling technique that satisfies the actual demands is still a challenge to achieve [21‐23]. This is evident from the low utilisation, estimated as 8% to 20%, of the server capacity purchased by the SPs [24].
Anzeige
The existing research literature on cloud elasticity differs in various aspects, e.g. triggering behaviour (Reactive/Predictive/Hybrid), scope (CPs/SPs perspective), dependency on metrics (CPU utilisation/Response time, etc.), and the implementation technique (Control Theory/Machine learning/Rule-based, etc.). Despite such differences most of the existing methods can generally be grouped into Fixed or Adaptive categories based on their design and working mechanism to analyse their pros and cons as a whole [25].
The Fixed class refers to the family of all elastic methods that are designed off-line and remain fixed at runtime. On the other hand, the Adaptive class indicates methods that are equipped with an on-line learning capability that is responsible for adaptation at runtime in response to changes in the working environment. The Fixed approaches are simple, easy to design and better for systems with uniform workload behaviour, e.g. rule-based systems and fixed gain elastic feedback controllers. However, the performance severely affects systems with variable workloads due to lack of adaptability at runtime. In contrast, the Adaptive approaches are more flexible due to on-line learning capabilities and they perform better in scenarios with slowly varying workload behaviour. However, they are also criticised for their additional computational cost caused due to the online learning [26], long training delays, their associated risk of reducing the quality assurance of the resulted system and the impossibility of deriving a convergence or stability proof [25].
In contrast to the families mentioned above, this paper advocates a fixed-adaptive (also referred to as Hybrid by Gambi et al. [25]) approach, a method commonly associated with the biologically-inspired multi-model switching and tuning (MMST) methods. Using such an approach, an elastic method follows a Fixed design principle, but also achieves certain level of adaptive behaviour at runtime. The review of existing state-of-the-art elasticity research (Section 6) indicates that such an approach for implementing cloud elasticity has not received much attention.
Another important factor identified in the existing elasticity literature is the importance of addressing the uncertainty related issues, e.g. impreciseness in domain knowledge and noise in monitoring data. Jamshidi et al [14, 27] and Farokhi et al [28] stressed the importance of the uncertainty aspects required to be considered while designing elastic controllers. However, despite the importance, the implementation of uncertainty in the context of cloud elasticity has not yet been well received [28]. The methodology proposed in this paper is also a step forward in this direction.
Anzeige
This paper addresses the horizontal elasticity problem from a SP perspective and particularly focuses on contributing towards resolving the following issues in the existing elasticity literature: (1) The lack of adaptability and static scaling behaviour whilst considering completely fixed approaches; (2) The burden of additional computational overhead, the inability to cope with sudden changes in workload behaviour and preference of adaptability over reliability at runtime whilst considering the fully dynamic approaches; (3) The lack of considering uncertainty aspects while designing auto-scaling solutions; and (4) Lastly, the unavailability of solutions that facilitate qualitative elasticity rules to resolve the quantitative nature of the commonly used rule-based approaches. This paper investigates the synergy between the biologically-inspired multi-controller approach and fuzzy control system, to provide a holistic solution to address the aforementioned issues.
The rest of the paper is organised as follows. The next section provides the design of our proposed biologically-inspired cloud elasticity framework. The design, however consists of two different modes, termed as Hard switching and Soft switching. Therefore, each mode is explained in different section. Section 3 elaborate the customised settings used for experimentation and the results obtained in the case of Hard switching approach. Similarly, Sect. 5 presents the results obtained in the case of Soft switching approach. Section 6 comparatively summarizes the research undertaken in the field of cloud elasticity research. Lastly, Sect. 7 concludes this paper.
2 Biologically-inspired elasticity framework: hard switching
Fig. 1
Hard switching framework
×
The proposed multi-controller with fuzzy switching framework consists of the use of an array of controllers, where each controller is particularly designed to achieve better performance in a different situation and the selection of a suitable controller is realised at runtime. The architectural diagram of the proposed control methodology can be seen in Fig. 1 which extends and builds on the classical feedback loop model.
The key idea behind the proposed framework is to divide the complexity of the overall system by constructing multiple fixed gain controllers, where each controller depicts a separate elastic policy that carries out scaling actions at different intensity level. The design of the proposed methodology (or any switched method in general) involves the following two key challenges: (1) how to partition the system among multiple controllers? (2) How to switch (or formulate) the final decision? Due to the lack of a standard approach for partitioning the system among sub controllers [29], this research realises the use of expert-oriented distribution of workload intensity into various categories such as low, moderate and high. For each category, a system model is constructed, based on which a controller is designed. The final decision is carried out by the selection of a suitable controller at runtime using an intelligent switching mechanism, implemented as a fuzzy control system, i.e. also formally called as Fuzzy Inference System (FIS) as represented in Fig. 1.
The proposed control method is responsible for the readjustment of the number of Virtual Machines (VMs) to maintain the average CPU utilisation of hired VMs running at that time. The proposed methodology incorporates three Fixed gain controllers termed Lazy, Moderate and Aggressive. In theory, the number of controllers depends on the adaptation and application scenario. Increasing the number of controllers facilitates more fine-grained control over cloud resources, however, it also increases the design complexity of the elastic method. Each controller depicts a different elasticity policy, and theoretically they can be implemented using any suitable technique.
The incorporation of fixed controllers with switching ability enables the adaptive behaviour of the system to respond appropriately to the needs of the system in case of changes in workload without the need of any on-line learning algorithm. Each of the controllers is designed to react differently in the various situation. In this case, as their name specifies, they indicate three different scenarios, i.e. to perform scaling action at slower, moderate and aggressive intensity level. The selection of one of this policy depends on the behaviour of the system at that point in time. The behaviour of the system can be identified using the latest status of the following three aspects including application performance, workload arrivals, and resource utilisation. These aspects are represented as Response time, Arrival rate and Control error respectively in Fig. 1.
The System Monitor component of the proposed methodology is responsible for obtaining the latest status of the three parameters mentioned above. These measurements (as shown in Fig. 1) are provided to the FIS. The FIS then decides using the collection of elastic fuzzy rules (Sect. 2.2), what level of intensity is needed for the readjustment of resources (VMs) to meet the desired performance objective (explained in Sect. 2.2.2). The output of the FIS is one of the employed controller that is responsible for making scaling decisions.
2.1 Feedback control
The design and development of the feedback control part of the methodology follows the process flow proposed by Antonio et al. [30]. This process flow consists of the following steps: Defining the goal of control methodology, Identification of control input and devising of system’s model and finally, the development, deployment and evaluation of the control methodology. The details of the control system goal, control input, system model and control design in the prospect of our proposed methodology are provided in the following subsections. Whereas, the deployment and evaluation are discussed in Sect. 3.
2.1.1 Goal of control methodology
The goal of the control methodology is to adjust the number of VMs (will also be referred as Cluster size in the rest of the paper) at runtime in response to changes in workload to maintain the CPU utilisation of all VMs at a desire reference value. The use of CPU Utilisation is considered here assuming that the performance of the underlying test scenario is influence by CPU utilisation only. In scenarios, where application performance relies on other metrics (e.g. memory consumption, etc), the CPU Utilisation should be replace accordingly.
In the context of control system, based on the above-mentioned goal description, CPU utilisation becomes the Measured output of the system and we have to identify the Reference input, i.e. the target CPU utilisation that results in achieving the desired performance level. For any given application scenario, the desired performance level is the acceptable level of performance, i.e. the mean response time (mRT), that the application owner desire to maintain for their application. In this paper, for the evaluation of the proposed method, we consider the value (mRT ≤ 0.6 s) as the desired performance measurement. Hence, the scaling mechanism will make changes to the system resources such that the performance of the application acheive the mRT ≤ 0.6 s. However, response time is an application level metric. Therefore, we need to identify the corresponding CPU utilisation level, where the system will be able to maintain the application mRT ≤ 0.6 s.
The key reasons for using CPU utilisation as the system output are the following: (1) The CPU utilisation is directly obtained from the CPs provided monitoring Application Programming Interface (API). Hence it does not require application level monitoring efforts. (2) It is a system specific metric and no runtime relation identification between application metric, e.g. Response time, is required. Hence it does not involve additional overhead at runtime. (3) More importantly with respect to our methodology, we have already catered application level metric (i.e. Response time) for decision-making. Thus using CPU utilisation as another metric strengthens the decision-making mechanism by taking into account the system’s resource utilisation perspective. Hence, the proposed methodology becomes hybrid in contrast to most of the existing methods that either rely on application [14, 31] or system level metrics [11, 32, 33].
Fig. 2
VM performance
×
The measurement for Reference CPU utilisation can be obtained using system identification (SID) experiments by establishing a relationship between VM CPU utilisation versus performance. This experiment and all other such SID experiments are conducted using an extended version of a well-known cloud simulation tool named CloudSim [34].
The SID experiment records the measurement of CPU utilisation and mRT against several workloads that differentiate regarding the number of incoming requests ranging from 50 requests per minute (rpm) to 950 rpm. Each measurement of CPU utilisation and mRT against the specified rpm is obtained from sub experiment, where the corresponding number of rpm are sent for 30 minutes to the system, which consists of one VM. The arrival time of job requests in a minute and the service time of each request is randomly assigned. This whole experiment is repeated 100 times and the average for each measurement is recorded. The obtained results are presented in Fig. 2.
It is evident from Fig. 2 that the increase in the number of rpm makes the mRT slower. The dashed line in Fig. 2 represents the desired performance measurement, and we are interested in the maximum rpm measurement for which the obtained performance is less than the desired target, i.e. (mRT ≤ 0.6 s). This criterion is satisfied by 850 rpm. However, in this case, there were 13% Service Level Objective (SLO) violations observed, which is not acceptable as per the employed performance objective (will explain in Sect. 2.2.2). Therefore, we do not select the 850 rpm and consider the next measurement, i.e. 800 rpm, that satisfies the criterion mentioned earlier. This means that on average one VM can fulfil maximum 800 rpm on a per minute basis, while obtaining the desired performance level. Analogously, the number of rpm has similar effect on CPU utilisation, i.e. the increase in rpm results in an increase in the CPU utilisation as well. For the Reference input, we record the corresponding measurement of CPU utilisation from Fig. 2 against the 800 rpm, which is 55%. Thus the control methodology is responsible to maintain the measurement of 55% as the Reference CPU utilisation.
2.1.2 Control input
The number of VMs is used as the Control input. This choice is obvious considering horizontal elasticity. Furthermore, we also perform an experiment to demonstrate the impact on mRT with a change in Cluster size. Figure 3 demonstrates the obtained results that indicate that increasing the number of VMs reduced the response time.
Fig. 3
mRT vs cluster size with constant workload (2800 rpm)
×
2.1.3 System modelling
This section identifies the system model that describes the relationship between input (number of VMs) and output (CPU utilisation) of the system. We follow the black box modelling approach that mainly consists of SID experiments to obtain training data, building and evaluating the model. The following subsections explain the process.
SID experiments design The SID experiments record the training data consisting of input-output pairs of system by changing the control input in a systematic way during the experiment. During this experiment, we assume that the historical information related to system workload is available and on that basis, we use domain experts based distribution of workload into three categories namely Low, Moderate and High. Using these categories and following the principles of Gain scheduling technique where workload-specific models are developed [35]. We conduct three workload category specific experiments. During each experiment, the value of control input is changed as per the discrete Sine wave equation given below:
$$\begin{aligned} y(t) = m + A * sin(t) \end{aligned}$$
(1)
The m in above equation represents mean, A represents amplitude and t represent time step. The time period for each experiment is 540 min long. The difference between each experiment is the use of different pair of (mean, amplitude) values and the use of different workload. The coverage of the input values generated using Eq. 1 during the experiments can be seen from Fig. 4a–c and the corresponding system output recorded in response can be seen from Fig. 4d–f respectively. In the case of system output, the vibrations in the measurement occur as a result that the majority of requests were cancelled because they were unable to complete their execution at a predefined maximum time (2 s).
Fig. 4
SID experiments: each pair presents the relationship between cluster size and CPU utilisation
×
System model and evaluation The Autoregressive Exogenous Model (ARX) approach is employed to describe the relationship between the number of VMs and CPU utilisation. The following equation represents the general form of an ARX equation.
The above equation represents a single input, single output system. The u and y represent the input and output of the system respectively. According to this equation, the output in next time unit (\(k+1\)) depends on the n number of previous output values and the m number of previous input values. The \(a_k\) and \(b_k\) are the constant coefficients values for each output and input value, whereas the m and n represent the order of the model. We use a 1st order ARX model of the following form that can be derived from Eq. 2 by setting \(m=n=1\).
The 1st order model, in contrast to m and n order model, relies on the input and output from the previous time unit only. The key reason of selecting the 1st order model is its simplistic nature and the ability to avoid over-fitting [35]. We have to find values for parameter a and b of the above equation from the training data obtained from the SID experimentation. For this purpose, we employ the commonly used least square regression method to estimate the model parameters for all the three experiments mentioned in the previous sections, and the outcome is in the following equations:
These models after validation can be used to design controllers and the following two approaches are normally followed. Firstly, each model could be used to design a different controller as it is obtained based on the average rate of each workload category and thus can be treated as workload-specific models. Secondly, one model could be used to design different controllers where each differs from others based on the controller properties. We follow the second approach and use the model of Eq. 4a for controller design (explain in Sect. 2.1.4).
The next step is to evaluate the model to quantify its accuracy. For this purpose, we employ a widely used method known as the coefficient of determination (denoted by \(R^2\)). The value of \(R^2\) can be calculated using the following equation:
The y in above equation represents the actual system output value, where \(\hat{y}\) indicates the predicted value computed by the model. The \(R^2\) value indicates the quality of the model, where a value \(\ge 0.8\) is considered as an acceptable range [35]. In our case, the value of \(R^2\) is 0.96, which indicates a good fit. However, according to Hellerstein et al. [35], a larger value of \(R^2\) can also be misleading in cases where data points are grouped together around extreme values. Therefore, to confirm the accuracy of the model, residual analysis plots are often recommended. Such a plot, in the context of our model, can be seen in Fig. 5 where the actual values of the output signal are plotted against the predicted values. It is evident from this plot that apart from few points, all other points are grouped around the diagonal line, which indicates better accuracy of the model.
Fig. 5
Comparison of measured output vs predicted output
×
2.1.4 Controller design
The goal of the controller design step is to select the control law and any required parameters for the Controller component of the feedback control methodology. The control law determines the structure of Controller component and describes how it will operates [36]. In this paper, we adopt the Integral control law for each of the three employed controllers, i.e. Lazy, Moderate, and Aggressive. The key reasons behind this selection is its simplistic nature and its extensive use for similar problems, e.g. [9, 37‐40].
The integral law can be defined using the following equation:
u(t) represents the new value for control input in time t, e(t) is the control error that represents the difference between the desired and measured output, i.e. \(e(t) = y_{ref} - y_t\), and \(K_i\) is referred to the integral gain parameter. In this paper, the number of VMs is the control input, whereas CPU utilisation is the measured output. The control error represents the difference between the desired CPU utilisation (i.e. 55%) and the measured CPU utilisation.
The integral gain parameter indicates the aggressiveness of the controller that determines how fast the system will respond. The higher this value, the faster the system will react. However, careful attention is required while deciding the gain of the controller as higher value of the gain parameter could cause oscillation and may lead the system to instability. All the three employed controllers adopt the same integral law specified by Eq. 6. However, their integral gain parameter is different. The following equations represent each employed controller:
The gains \(K_{_{i}}^{^L}\), \(K_{_{i}}^{^M}\) and \(K_{_{i}}^{^A}\) are derived using the standard procedure of Root-locus that provides a systematic method to analyse and design feedback controllers. The Root-locus method require the transfer function of the feedback control system. Such a transfer function can be obtained by the corresponding transfer functions of the different components of the feedback loop. In our case, the different components include the integral controller (represented by Eq. 6) and the target system (represented by one of the model earlier described in Sect. 2.1.3). The transfer function of integral controller is given in Eq. 10, whereas the transfer function of the system model of Eq. 4a is provided in Eq. 11. Based on these equations, the transfer function of the entire feedback loop [35] is provided in Eq. 12.
Using the Root-locus method by taking into account the transfer function of feedback loop (Eq. 12), we finalise the following values \(-\,0.06\), \(-\,0.2\), and \(-\,0.5\) for \(K_{_{i}}^{^L}\), \(K_{_{i}}^{^M}\), and \(K_{_{i}}^{^A}\) gains respectively. The analysis performed using Root-locus indicate that the system remains stable (always reach to equilibrium) and accurate (steady-state error reach to zero) using all the selected gains. The finalised value has a settling time of less than 10 time interval, whereas, the maximum overshoot recorded is less than 15%.
2.2 The switching mechanism: a fuzzy control system
2.2.1 Overview
The deployed application over cloud environment automatically inherits the uncertainty related challenges associated with the cloud environment [41]. Hence the elastic method, responsible for the resource management of the application, has to deal with these challenges. The examples of such uncertainties, summarised from [14, 27, 28, 41, 42], include impreciseness in domain knowledge, noise in monitoring data, inaccuracies in performance model, delay caused due to actuator operation and unpredictability in workload. Jamshidi et al. [14, 27] and Farokhi et al. [28] stressed the importance of the uncertainty aspects to be taken into consideration while designing the elastic controller. Otherwise, scaling decisions often result in unreliability as the available resources may fail to fulfil the requirements, or may not be cost-effective [28]. However, despite the importance, the implementation of uncertainty in the context of cloud elasticity has not yet been well received [28].
A step in this direction is the work of Jamshidi et al. in [14], where they proposed a fuzzy control system focusing mainly on two issues: (1) The quantitative nature of the Rules-based method by introducing the idea of qualitative elasticity rules; and (2) The lack of consideration regarding uncertainty raise due to noise in monitoring input data. Their fuzzy controller introduces elasticity rules of the following nature:
IF workload IS high AND responsetime IS slow THEN add 2 VMs
The elasticity engine executes such rules at runtime and makes decision, based on Arrival rate and Response Time. The output of their controller is the number of VMs to be added or removed. Their approach facilitates a dynamic response based on the aforementioned two parameters by making a scaling decision with different intensity levels, and consequently it improves the static scaling issue of the Rule-based approaches. However, the output (number of VMs) is a pre-defined range of constant integers, and these numbers are set-up based on the experiences of the experts rather than rely on a well-founded design approach. In contrast, our proposed approach relies on the systematic method of control theory to compute the number of VMs. Moreover, our approach is hybrid in nature, i.e. it also incorporates both the performance and capacity based metrics as opposed to their performance based approach only. This paper compliments and extends the work of Jamshidi et al. [14] aiming to develop a fuzzy control system to implement the switching mechanism of the proposed framework. The following subsections explain the design process of this switching mechanism.
2.2.2 The design process
The construction of a fuzzy system involves the following three steps: establishing domain knowledge, designing membership functions and composing fuzzy rules. The details of each of these steps in the context of our switching mechanism are provided below.
Domain knowledge The domain knowledge is concerned with the identification of inputs and outputs of the system. The inputs specify factors of the system that are important to be considered for decision-making purposes. As mentioned earlier, the proposed method considers three different aspects of the system for decision-making. These aspects are the inputs of the fuzzy system and their brief description are provided below:
1.
Response time indicates the performance level of the deployed application and is measured as the percentage number of SLO violations (i.e. when Response time of a job request > 0.6 s) in the last time unit.
2.
Arrival rate indicates the workload behaviour in the last time unit and is measured as percentage number of job arrivals. The System Monitor component of the proposed method records the number of arrivals in the last time period to identify the intensity of the workload.
3.
Control error inclusion as an input is the consideration of resource utilisation level into the decision-making. The Control error is the difference between the measured and desired CPU utilisation.
These inputs cover performance, disturbance and resource utilisation aspects in the decision-making mechanism. Contrary to the fuzzy controller of Jamshidi et al. in [14] that directly produces the pre-defined constant number of VMs as a scaling decision, the output of our fuzzy system is one of the employed controllers that will be used to compute the scaling decision.
The next step is to define fuzzy set for each input and output (commonly known as fuzzy variables). The fuzzy set of each variable comprises of defining linguistic terms and assigns ranges of values to them. Table 1 provides the definitions of all the linguistic terms for each fuzzy variable and their corresponding ranges, whereas their brief description is given as follows:
The linguistic terms and the corresponding ranges for the Workload (i.e. Arrival rate) variable are adapted from the work of Jamshidi et al. in [14], where the knowledge base is constructed using domain experts, i.e. architects and administrators. They constructed a fuzzy set of five linguistic terms for Workload variable including Very low, Low, Medium, High and Very high. We reduce them to three to minimise the number of rules, hence reduce the complexity. However, more fine-grained control over resources can be obtained by increasing the number of workload categories or the number of controllers.
The linguistic terms of Response time variable reflect the overall performance objective of the application that can be defined by the SPs. In Table 1, we use symbols \(\beta _1\), \(\beta _2\), \(\beta _3\) and \(\beta _4\) to represent the customisable aspect of these parameters. Jamshidi et al. [14] in contrast, distributed the Response time into five categories with the values obtained from domain experts. However, considering that the application performance measurement for different applications is different, the values of the linguistic terms of Response time are customisable to reflect the desired performance objective and have to be defined by the SPs. In the current settings of this paper, we adopt the following values for evaluation purposes, i.e. \(\beta _1=3\%\), \(\beta _2=5\%\), \(\beta _3=8\%\), and \(\beta _4=10\%\).
The linguistic terms of Control error are obtained by distributing the Control error measurement into five categories. An increase in these categories can provide more fine-grained control. However, it will also increase the complexity of the proposed method. The ranges of these linguistic terms are obtained using trial and error method, where various experiments are carried out using different ranges.
The linguistic terms of Controller variable are the possible outcomes. These terms depend on the number of controllers, which in this case are three. We also consider one more output, i.e. No-scaling that specifies no action is required. The ranges of these linguistic terms are set based on the approach adopted in [43], where no overlapping of the range is required because the final decision represents a range that corresponds to a single output rather than a numerical value.
Table 1
Ranges for fuzzy variables
Fuzzy variable
Set member
Range
Workload
Low
0–48.9
Medium
30.7–67.94
High
56.41–100
Response time
Desirable
0–\(\beta _2\)
Okay
\(\beta _1\)–\(\beta _4\)
Bad
\(\beta _3\)–100
Control error
Stronger negative (stNeg)
− 20 to − 100
Weaker negative (weNeg)
− 5 to − 30
Normal
− 10 to 10
Weaker positive (wePos)
5–30
Stronger positive (stPos)
20–100
Controller
No scaling
0–10
Lazy
11–20
Moderate
21–30
Aggressive
31–40
Membership Functions The next step is to define the membership functions that convert the crisp inputs into the corresponding fuzzy values. The membership function defines the degree of the crisp input against its linguistic variables in the range of 0 to 1. The design of the membership functions, adopted from Jamshidi et al. [14], use triangular and trapezoidal types of function. These functions have the advantage of being simple and efficient in comparison with other types of membership functions [44]. Figure 6 represents the membership functions of our fuzzy control system.
Fig. 6
Membership functions
×
Fuzzy rules The fuzzy rules describe the relationship between the inputs and outputs of the fuzzy control system. Each fuzzy rule, in this case, determines the type of the controller that makes the scaling decision. The fuzzy rules are made of using fuzzy logic statements and follow the if-then pattern. The fuzzy rules of the switching mechanism are made using the linguistic terms of the fuzzy variables explained earlier in Sect. 2.2.2. An example of such a rule is provided below:
IF arrivalRate IS high AND responseTime IS desirable AND controlError IS wePos THEN controller IS lazy.
In the above example, a Lazy controller is selected based on the values of Arrival rate, Response time and Control error. Such rules for an application scenario can be designed using the combination of linguistic terms provided for each parameter in the rule (see Table 1). Such rules can also be tuned for different situations using optimisation approaches. A full list of the rules employed for the experimentation conducted in this paper are provided in Table 2. These rules are designed using the following considerations: (1) Select those rules that react quickly if the application performance is poor; (2) If the application performance is desirable then aims to reduce system running cost; (3) Aim to maintain the CPU utilisation around the desired reference value.
Table 2
All switching elasticity rules
W
RT
CE
No-scaling
Controller
Lazy
Moderate
Aggressive
High
Desirable
wePos
✓
High
Desirable
stPos
✓
Medium
Desirable
wePos
✓
Medium
Desirable
stPos
✓
Low
Desirable
wePos
✓
High
Desirable
stPos
✓
High
Desirable
weNeg
✓
High
Desirable
stNeg
✓
High
Okay
weNeg
✓
High
Okay
stNeg
✓
High
Bad
weNeg
✓
High
Bad
stNeg
✓
Medium
Desirable
weNeg
✓
Medium
Desirable
stNeg
✓
Medium
Okay
weNeg
✓
Medium
Okay
stNeg
✓
Medium
Bad
weNeg
✓
Medium
Bad
stNeg
✓
Low
Desirable
weNeg
✓
Low
Desirable
stNeg
✓
Low
Okay
weNeg
✓
Low
Okay
stNeg
✓
Low
Bad
weNeg
✓
Low
Bad
stNeg
✓
–
–
Normal
✓
3 Experimentation and computational results I
The experimental environment used for the evaluation is developed using Java language that integrates a well-known cloud simulation environment called CloudSim [34] and an external Java-based library called JFuzzyLogic [45]. The following subsections explain the various aspects of experimentation and the obtained computational results.
3.1 Workloads
The commonly used approach to test an auto-scaling methodology is to evaluate its performance against different workloads, based on certain desirable criteria. Gandhi et al. in [46] and Jamshidi et al. in [14] evaluated their proposed elastic methods using workloads that follow different patterns. The key reason of using such an approach is to evaluate and analyse the performance of an elastic method in different scenarios. The workload patterns that they have used include Quickly varying, Slowly varying, Dual phase, Tri phase, Big spike and Large variations. Similarly, Mao and Humphrey [47] used Stable, Cyclic, Growing and On–off set of patterns. Each of these patterns represents a different class of applications [26]. This research also adopts the patterns mentioned above to analyse the performance of the proposed method. In this paper, we identify seven different workloads that can be seen from Fig. 7 to represent a single or multiple patterns. Amongst these, one is synthetically generated, whereas the remaining six are derived from the following real Internet-based sources including Wikipedia [48], FIFA World Cup [49] and WITS (Waikato Internet Traffic Storage) [50] project. All the derived workloads traces are vertically scaled to a maximum of 60,000 rpm and the number of arrivals on per minute basis is obtained from the count of actual arrivals except for the synthetically generated one. Furthermore, the service time of each job request is randomly generated between 100 and 500 ms to incorporate the stochastic behaviour of the incoming arrivals.
Fig. 7
Various workloads used for experimentation
×
3.2 Benchmark approaches/scenarios
3.2.1 Fixed gain feedback controller
We have used Fixed gain feedback controller as one of the benchmark methods. The key reason behind is that our proposed method is an extension of such an approach, where we use multiple Fixed gain controllers simultaneously. The individual elastic controllers are termed Lazy, Moderate and Aggressive respectively, thus aiming to demonstrate the effect of using the same controllers independently versus using them collectively as in the proposed framework.
The nature of the individual controllers, i.e. Lazy, Moderate and Aggressive, in general are similar to those used in related elastic methodologies such as [9, 11, 37, 51]. The individual controllers are implemented following the proportional threshold approach of [9], where the Reference input is considered as a range rather than a scaler value. This approach avoids the unnecessary oscillations by restricting the controller not to take a decision if the measured output is within a certain range. In this paper, we consider a range \(\pm 10\)% of Reference input (55%), because it is the same as the range of Normal linguistic term of Control error fuzzy variable used in our proposed switching mechanism.
3.2.2 RightScale: a rule-based approach
The RightScale [5] is a 3rd party commercially available auto-scaling approach, which is a Rule-based method. In the RightScale method, each VM engages in a voting process, where every VM decides whether a scaling decision is required or not. The decision by individual VMs is based on the set of elasticity rules. The implementation of RightScale includes the setting of decision threshold value for the voting process. For this purpose the value 51% is used. This represent, if just more than half of the VMs are in favour of the decision then the action will be performed. Otherwise, it will be ignored. Another important aspect of RightScale implementation includes the determination of system metric to be used for setting up the rules. For this purpose, we use CPU utilisation as a system metric based on its usage as the Reference input in the proposed method. The elasticity rules used for the implementation are as following:
For scale up
if CPU Utilisation \(> thr_{up}\) then
\(n= n + s_a\) and
do nothing for t seconds
For scale down
if CPU Utilisation \(< thr_{down}\) then
\(n= n - s_r\) and
do nothing for t seconds
The value use for \(thr_{up}\) is 55%, i.e. the desired Reference input of our proposed method as we already know, the performance degrades when CPU utilisation becomes higher than 55%. The value for \(thr_{down}\) obtained by trying different possible values such as (20%, 30% and 40%) and then selected, the value that produces the better result regarding the evaluation criteria (explain in next section). Another important configuration required is the settings of values for \(s_a\) and \(s_r\). For this purpose, we use the following four different settings: (1) \(s_a=s_r=2\), (2) \(s_a=2, s_a=1\), (3) \(s_a=4, s_r=2\) and (4) \(s_a= 10\%, s_r=5\%\). Lastly, the t in both of the above rules specifies.
3.3 Evaluation criteria
The key objective of implementing cloud elasticity is to improve the utilisation of computational resources whilst maintaining the desired performance of the system and reducing its operational cost. This statement hints on the fundamental criteria, i.e. Performance and Cost for the assessment of an auto-scaling mechanism. The brief details for each aspect in the context of this paper is as follows.
1.
Service level objective (SLO) Violations We consider Response time as a criterion to measure the performance of the elastic method. The requirement regarding desired performance objective in cloud computing is defined through SLO specification. In this paper, we consider that each job request of the workload must be completed in the pre-defined desired time, i.e. \(\le \) 0.6 s. Thus an SLO violation is considered, if the desired Response time for a job request has not been achieved.
2.
Cost The Cost refers to the operational cost of the rented VMs. These VMs are used to execute the workload and each VM is associated with a cost per time unit. The total running time of all VMs is recorded for the entire experiment. This includes the time when a VM starts to the time it finishes execution, either as a result of a Scale-down action or when the experiment finishes. A rate of 0.013$ per hour is applied to calculate the final cost based on the Amazon pricing [52] for the VM instances of “t2.micro” type.
Fig. 8
The left column presents the integrated results for each employed workload, whereas, the right column present the number of SLO violation (%) in a per hour basis
×
3.4 Computational results and analysis
The benchmark methods as well as the proposed methods are implemented into the CloudSim environment. CloudSim is extensively used in the cloud related research activities for modelling and simulation of cloud computing systems and applications. We have used, and extended where necessary, its various functionalities, such as the scheduling strategies, creation and deletion of VMs, etc.
For the experiments, all VMs are identical and are considered as abstract servers, that imitate to serve a specific purpose, e.g. act as web servers. Furthermore, for each particular method, i.e. the benchmark methods and the proposed methods, the following related aspects of the simulation environment remain the same:
VM creation The focus of our proposed method is from the SP perspective, where the main concern is with the management of rented VMs and not the underlying physical hardware that host VMs. Therefore, in this research work, we are not considering aspects like optimal placement of VMs on physical hosts, which is in itself researched as an independent problem. For the simplicity of the implementation, the default allocation and scheduling policies of CloudSim concerning the VM and Host related assignment and execution are used.
VM deletion In the case of scale down operation, the VM with lowest number of jobs is selected to delete. The action of delete is however not immediate and the deletion process wait until the completion of all jobs.
Jobs allocation Analogous to the VM and Host related allocation and scheduling policies, the assignment of incoming jobs to the already available VMs are handled through a round robin policy.
The computational results obtained from the experimentation can be seen from Fig. 8. In this figure, rs_21, rs_22, rs_42 and rs_pro represent the four different settings of the RightScale method explained earlier in Sect. 3.2.2. Similarly, Lazy, Mod and Agg refer to the benchmark methods explained in Sect. 3.2.1 and HS represents the proposed Hard switching method.
The plots in the left column of Fig. 8 present an aggregated view of Cost versus Performance aspect of the overall experiment for each method. Some of these plots do not show results of few methods. The reason behind is that in such cases, the number of SLO violations were recorded as \(\ge 5 \%\), i.e. higher than the desirable performance objective. Therefore, those results were not of interest and are excluded to improve the readability of plots. The only exception to this criteria is in the case of On off scenario, where all methods results in \(\ge 5 \%\) SLO violations, except thle proposed method, i.e. HS. The plots in the right column present the corresponding time series view of the number of SLO violations in an hourly basis for the three methods that obtained comparatively better aggregate results. This section briefly discusses each of the applied methods in light of the obtained computational results.
1.
Rightscale It is observed from the obtained results that some settings of the Rightscale method produce better performance in comparison to the other approaches, i.e. Lazy, Mod, Agg and HS. However, this better performance is obtained with a very higher cost. Such phenomena are only observed in those scenarios, where transitions in workloads are comparatively smooth, e.g. in the case of Dual-phase, Cyclic and Slowly varying scenarios. In other scenarios where sharp changes occur in workloads, e.g. in the case of Large variations and On–off scenarios, the performance is comparatively poorer than HS and Moderate despite being expensive. A key reason behind is the underlying static scaling behaviour of the Rightscale method, where a scaling action is performed using a uniform quantity.
2.
Aggressive It is observed that the aggregated results of performance obtained using the Aggressive approach in the case of Dual phase and Quickly varying scenarios are comparatively better than HS. However, the time series analysis of those scenarios indicates that the performance of the system is poor in certain hours specifically when the arrival rate of the workloads is low. The key reason for this behaviour is the inappropriate scaling intensity that causes a bigger change in some cases, e.g. observe the time series view of CPU utilisation in Fig. 9 for the first two hours and 5th hour in the case of Dual-phase scenario and 6th hour in the case of Quickly varying scenario. The worst situation arises in the case of Large variations, where the system resources oscillate when the arrival rate of the workload remains low. This indicates that using a uniform Aggressive method at the entire time is not a good choice and could lead the system to an unstable state.
3.
Moderate The performance of the Moderate policy works well in the following two cases. Firstly, where the incoming workload remains stable in a particular region, e.g. the segment after the 8th hour in the case of Large variation; Secondly, where the arrival rate changes slowly, e.g. in the case of Slowly varying. However, the Moderate method performs poorly in comparison to the Agg and HS, when there are sharp changes in the incoming workloads, e.g. the segment after the 7th hour in the case of Quickly varying for the 7th and 19th hours in the case of On–off etc.
4.
HS It is evident that the performance obtained using HS in comparison to the above-mentioned methods remains better in all of the following scenarios without having an impact on cost, i.e. Large variations, Tri-phase, Cyclic and On–off. The exception is in the cases of Dual-phase and Quickly varying, where the aggregate performance is slightly poorer than that of the Aggressive method. However, considering the time series analysis, the HS approach maintains better performance during the entire time. Lastly, in the case of Slowly varying, the HS and Moderate policy have achieved similar performance.
Fig. 9
CPU utilisation using aggressive method
×
The above discussion indicates that using a uniform fixed policy is unable to cope with changing workload conditions. In contrast, the proposed Hard switching consists of the collection of the same policies with an additional switching mechanism result in an improved system performance without an increase in the operational cost.
The hard switching approach described in previous section has the potential to improve system performance in comparison to the benchmark methods. However, such methodologies are often criticised for their associated unwanted behaviour, termed as bumpy transition, that could lead the system to an oscillatory state [35, 43, 53]. Figure 10 demonstrate the occurrences of such unwanted behaviour in the results obtained using our hard switching (HS) approach. The oscillation of resources may have deteriorating effects on the system performance as well as on the operational cost. It is therefore desirable that the proposed method should result in smoother transitions to avoid any oscillation.
Fig. 10
Time series of CPU Utilization obtained using HS approach
×
Soft switching, on the other hand, is an alternative technique used to avoid such unwanted behaviour. Such a mechanism in contrast to hard switching has the possibility to select multiple actions rather than one best choice. The key benefits of such an approach include: (1) avoidance of singularity and sensitivity problems, (2) improvement of robustness and stability aspects and (3) elimination of chattering issues [54].
This section aim to explore the capabilities of a biologically (cognitive) inspired action selection process to implement soft switching behaviour, hence seeking the possibility of more smoother (bumpless) transitions to improve the stability perspective. Formally, an action selection is the process of deciding what to do next from a set of available actions by an agent, based on some knowledge of the internal state and some provided sensory information of the environmental context to best achieve its desired goal [55]. Over a period of time, researchers have learnt that in animal’s brain, the problem of action selection is handled through the use of a central switching mechanism [56, 57]. This mechanism is implemented by a group of subcortical nuclei collectively refers to as Basal Ganglia (BG) [56, 57]. For a functional anatomy of BG, refer to [55]. To incorporate such a mechanism into our framework, we integrate a well established BG based computational model of Gurney et al. [58, 59]. The key advantages of this computational model include its biological plausibility and computational efficiency [60]. The block diagram of the enhanced framework (Soft switching) can be seen from Fig. 11. Comparing this diagram with the Hard switching approach, the following three differences can be observed: (1) the integration of the BG component, (2) the output of the FIS component and (3) the final output of the control system. The details of each of these differences are provided in the following subsections:
Fig. 11
Biologically-inspired soft switching framework
×
4.1 The BG component
This component integrates the BG based computational model that builds on the functional anatomy of BG. Some examples of such models include [58, 59, 61‐63]. Amongst these models, we utilised the computational model proposed in [58, 59]. However, any model can be used as our aim is not to identify the best action selection or biologically-inspired computational model rather to demonstrate the effectiveness of such an approach in the context of the cloud elasticity.
Focusing on Gurney et al. [58, 59] computational model, the brain subsystems send excitatory signals that represent the behavioural expressions to the BG. Each behavioural expression defines an action in BG and its strength is determined by the salience that represents the activity level of its neural representation. These actions are mediated through the release of inhibitory signals. Thus in each iteration, the functional model accepts a set of salience signals and produces a set of selected and unselected output signals. The functional model can select a maximum of one action (referred as Hard mode), similar to the Hard switching approach earlier described in Sect. 2. Alternatively, the functional model can also have the possibility to select multiple actions (referred as Soft mode). In this research work, we are interested in the Soft mode of the functional model, where it result in the selection of multiple actions. For a detailed description of the functional model refers to [58, 59].
The BG component, shown in Fig. 11, accepts three inputs namely lazySalience, modSalience and aggSalience. These inputs represent the strength of selection for each controller (depicting as action). The values for these salience signals are computed by the FIS (details provided in the next section).
4.2 The modified FIS
The BG based computational model requires salience signals as inputs. Thus the first issue to be dealt with is the generation of salience signals. The method to generate the salience signals can make use of system’s internal state, various performance metrics or available sensory information [60]. Therefore, we have extended the FIS, used as a switching mechanism in previous section, to generate the inputs (salience signals) for the BG component of the framework. The inputs of the modified FIS remains the same, i.e. Workload, ResponseTime and ControlError. However, the output is changed from one, i.e. Controller to three lazySalience, modSalience and aggSalience. Each of these outputs represents the salience strengths for the selection of each of the three controllers. The details of the changes carried out are as following:
1.
Membership functions The inputs of the modified FIS do not change, and therefore the corresponding membership functions of the input fuzzy variables remain the same. However, the output is changed, therefore, the Controller membership function is replaced with three new membership functions, i.e. one for each newly introduced output. Similar to the Controller membership function, we have used the basic triangular type for all the outputs. The membership function for each salience signal variable is of the form shown in Fig. 12.
2.
Fuzzy rules The fuzzy rules are responsible to generate the salience inputs. The fuzzy rules described in previous section are revised accordingly. The inputs of the rules are the same as in the case of Hard switching. However, the output can be formed using the linguistic terms (weak, average and strong) for each salience. An example of such rule is provided below:
Fig. 12
Membership functions for each salience variable, i.e. lazy, moderate and aggressive
×
IF arrivalRate IS medium AND responseTime IS desirable AND controlError IS stPos THEN modSalience IS strong AND aggSalience IS average
4.3 Derivation of final output
As mentioned earlier, in terms of the adopted functional model, we are interested in the mode, where it result in the possibility of multiple actions section. Hence the final decision, i.e. the number of VMs, will be derived using the output signals returned by the BG component and the outputs of the individual controllers. The following equation represents this derivation.
The \(u_{t}\) in the above equation represent the final decision. \(u^{^L}(t)\), \(u^{^M}(t)\) and \(u^{^A}(t)\) represents the output of individual controllers, i.e. lazy, moderate and aggressive respectively. These outputs are computed as per the equations described in Sect. 2.1.4, i.e. Eqs. 7, 8 and 9 respectively. Whereas, \(g_{_L}\), \(g_{_M}\) and \(g_{_A}\) are the output signals returned by the BG component. The values of these signals lies between 0 to 1 and they signify the proportion of each action. The denominator g represents the number of those output signals with a value higher than zero. However, it is not always the case that more than one controller to be selected.
5 Computational results II
We have used the same experimental settings and scenarios (i.e. gains for controllers and workloads) as in the case of Hard switching to evaluate the Soft switching approach. It is already discussed previously that the Hard switching achieves better results compared to the benchmark methods. Therefore, in this section, we only compare Soft switching to Hard switching approach. We present and discuss the obtained computational results in the following two aspects:
5.1 Performance
Figure 13 shows the aggregated view of the results obtained using both the approaches, i.e. Soft switching and Hard switching. These approaches are represented as SS and HS respectively in the reported results. Considering the number of SLO violations, it is evident that the SS approach has obtained, lower number of SLO violations to that of HS, in each employed scenarios. On the other hand, the comparison of the cost perspective indicate the similar level of spending by both approaches, i.e. SS and HS. This demonstrates that the SS approach results in better performance compared to that of HS without increasing the operational cost of the system.
Figure 14 provides an insight into the performance of both the approaches on an hourly basis. Each plot of this diagram represents the result for every employed workload scenario. The analysis of these plots hints the following: (1) The performance obtained, in the cases of each scenario, using SS approach in almost every hour is either similar to that of HS or comparatively better. This indicates a higher potential to maintain better performance during the entire period of the experiment. (2) The SS and HS approach behave almost similarly in scenarios, when there are sharp increases in workload, e.g. the 6th hour in the case of Cyclic, the 7th hour in the case of Large variations and the 7th and 19th hours in the case of On–off scenarios. (3) The SS approach performs comparatively better when the arrival rate of the workload remains low, e.g. initial 5 hours period in the case of Dual-phase and the hours from 15th to 18th in the case of On–off. This indicates that at the time of low workload, the decision of HS affects the performance more due to its best controller selection strategy in comparison to that of SS approach.
Fig. 13
Aggregated view (HS vs SS)
Fig. 14
Time series view of SLO violation
×
×
5.2 Oscillatory behaviour
The results presented in the previous section demonstrate the effectiveness of the Soft switching approach regarding the improvement of the overall performance. This section discusses the possibility of reducing the likelihood of bumpy transitions and oscillation in comparison to the Hard switching approach.
Fig. 15
CPU utilisation (HS vs SS)
×
Figure 15 presents the measured CPU utilisation recorded for HS and SS approaches. The analysis of these plots hints on the following insights:
1.
Focusing on the highlighted parts of HS plot for On–off scenario clearly hint at the presence of oscillations at two occasions, i.e. in the 3rd hours and in the 15th to 16th hours. On the other hand, using SS approach, no such oscillations can be seen in the corresponding SS plot that demonstrates clear improvements.
2.
Considering the DualPhase scenario shown in Fig. 15, it is clear that there is no oscillation using both the approaches. However, the highlighted part in the case of HS shows some bumpy transitions, i.e. in the 6th and 8th hours. Whereas in the case of the SS approach, the intensity of these bumpy transitions is reduced as is evident by visual inspection of both plots. Moreover, the variance of CPU utilisation measurements of 3 h, i.e. from 6th to 8th is calculated for both cases. These calculations are recorded as 12.84 and 15.24 for the SS and HS respectively. This demonstrates that the SS results in fewer variations compared to that of HS in those 3 h. Similar results can be seen for the scenario of TriPhase, where the variation in the case of SS from 4th to 6th is fewer than that of HS.
3.
The red dashed line in each plot of Fig. 15 represents the mean CPU utilisation obtained using the respective methods in each corresponding scenario. In all of the given three scenarios, the mean obtained using SS approach is comparatively less than that of HS, e.g. in the case of On–off, the means are 52.56 and 54.19 recorded using SS and HS respectively. This demonstrates that the SS approach is comparatively better and maintains the CPU utilisation below 55% more often than the HS approach.
In light of the above discussions, we can claim that the BG based Soft switching approach has higher potential to reduce the number of SLO violations, hence, result in better system performance. Moreover, compared with the HS approach, it has demonstrated the possibility of reducing the likelihood of bumpy transitions and oscillatory behaviour. The intuitive explanation for this improvement is the integration of controllers, (shown in Eq. (13)), in a biologically-inspired fashion augmented with the BG process that facilitates the natural selection of actions, hence result in less ’bumping’ at switching time [64]. Moreover, the computational model of [58, 59] in particular is successfully validated to avoid oscillation [62].
6 Related work and discussion
The proposed elasticity methods are developed using control-theoretical based multiple controllers and fuzzy control system. This synergy, on one hand, enables us to address the inherent uncertainty related issues of a cloud environment using the fuzzy control system. On the other hand, the systematic design of model-based feedback controllers helps in strengthening the reliability of the system. In this paper, we chose to address the cloud elasticity from a Service Providers (SPs) perspective. The key motivations behind this choice are that the cloud based applications are subject to varying workload conditions, and the Cloud Providers (CPs) lack control and visibility regarding application performance aspects that make it difficult to perform efficient scaling decisions [65]. In contrast, the SPs have full control and visibility of cloud resources using monitoring and management APIs provided by CPs, as well as an up-to-date knowledge of an application status using custom or 3rd party tools. The proposed methods are hybrid in nature, and consider application level metric (Response time) as well as system level metric (CPU utilisation). Additionally, we consider the Arrival rate that represents the incoming workload intensity level into the decision making process. The consideration of these three parameters empower the proposed methodology to make an informed scaling decision, as opposed to the majority of the existing related approaches that either rely on application level [14, 31] or system level metrics [11, 32, 33].
The existing Rule-based solutions in general are prevalent due to their intuitive, simplistic and, more importantly, commercial availability factors [66]. Such approaches [4‐8] are easy to design and well understood by the system designers and administrators alike. However, such methods lack a formal systematic design process as they are designed based on previous experiences or applying a trial and error approach [66, 67]. Moreover, they are criticised for the difficulty in setting-up various thresholds of the rules and their inability to cope with the changing environment behaviour [14, 26]. This is evident from the configurations and results of the RightScale approach discussed in Sect. 3.
The feedback control solutions [9‐12, 33, 37, 68] follow the fixed gain design principle of control theory. Such fixed gain methodologies in general work well for systems that are subject to stable or slowly varying workload conditions [67]. However, due to the lack of adaptive behaviour at runtime, the performance suffers in scenarios where the operating conditions change quickly or when the environmental conditions and configuration spaces are too wide to be explored effectively [25]. The lack of adaptivity issue has been addressed by incorporating online learning algorithms such as the use of linear regression [69], optimisation [70], Kalman filter [71] and reinforcement learning [72]. In general, such adaptive control methodologies have the ability to modify themselves to the changing behaviour in the system environment that make them suitable for systems with changing workload conditions. However, they are also criticised for the additional computational cost caused due to the online learning [26], their associated risk of reducing the quality assurance of the resulted system, and the impossibility of deriving a convergence or stability proof [25]. Moreover, they are unable to cope with sudden changes in the workloads.
Al-Shishtawy and Vlassov [73] addressed the elasticity problem using a two-level approach, where they utilised a combination of an Model Predictive Controller (MPC) based feedforward control solution and a Proportional Integral (PI) based feedback control method. Using such an approach, the feed-forward method follows a predictive approach that takes scaling decisions for a longer time in advance; whereas the feedback method is responsible for making gradual changes in a reactive style. Such two-step hybrid control solutions are effective; however, currently our focus is on the efficiency of elastic solution implemented at the 2nd level that follows a reactive strategy. Al-Shishtawy and Vlassov [73] utilised a fixed gain PI feedback controller that suffers from various issues discussed earlier in this section, whereas the approach adopted in this thesis uses multiple fixed gain controllers. Wang et al., Kjaer et al. [74‐76] followed a similar approach, i.e. the combination of feed-forward and feedback. However, they have focused on vertical elasticity.
The following proposals have also adopted a similar approach as employed in this paper. For example, Grimaldi et al. [32] used a PID gain scheduling. Their gain scheduler is an optimal controller that derives the gains using an optimisation based tuning procedure. The key issues of such an approach are similar to that of an adaptive methods discussed earlier in this section. Saikrishna et al., Qin and Wang, and Taneli et al. [77‐79] followed a Linear Parameter Varying (LPV) approach. CPU utilisation is considered as the single scheduling parameter by Saikrishna et al. [77], whereas Qin and Wang, and Taneli et al. [78, 79] rely on arrival rate and service rate. Patikirikorala et al. [31] followed a MMST based control solution. Their method use two different operating regions and consist of two different fixed gain controllers with an if-else switching that is based on Response time only. Saikrishna et al. [80], in contrast, used ten distinct operating regions and Arrival rate as a switching signal.
Jamshidi et al. [14, 15] highlighted the uncertainty related issues and the idea of qualitative elasticity rules using a fuzzy control system to address the issues of Rule-based approach. The inputs to their method consist of Arrival rate and Response time, whereas the output is the number of VMs to be added or removed. Their approach facilitates a dynamic response based on the aforementioned two parameters by making a scaling decision with different intensity level, and consequently it helps avoid the static scaling issue of the Rule-based approaches. However, the output (number of VMs) are a pre-defined range of constant integers, and it is not clear how these numbers are set-up. Therefore, it creates similar problems to that of the Rule-based approach, i.e. difficulty in setting-up threshold values of rules and lack of a well-founded design approach. On the other hand, machine learning based control solutions that utilise either reinforcement learning [19, 20] or neural networks [81, 82] provide high levels of flexibility and adaptivity. However, such flexibility and adaptivity come at the cost of long training delays, poor scalability, slower convergence rate, and the impossibility of deriving stability proof [25, 26, 83, 84].
It is concluded from the above discussion that the different elastic controllers due to their underlying implementation techniques have different pros and cons, hence there is no best solution and the choice of selecting suitable approaches depends on the requirements [25]. The research work carried out in this paper advocates the idea of a fixed-adaptive approach (also referred to as hybrid by Gambi et al. [25]) in contrast to either completely fixed or fully adaptive methods. The proposed elastic methodologies are implemented using the combination of the model-based control-theoretical approach and the knowledge based fuzzy control system. This combination, in comparison with the existing fixed-adaptive methods [31, 32, 77‐80], addresses the uncertainty related issues and enables us to provide qualitative elasticity rules as well.
7 Conclusion
This paper investigates the horizontal elasticity problem from the SPs perspective and proposes biologically-inspired auto-scaling solutions. The proposed elastic methods follow a Reactive triggering approach, target Web applications, and aim to maintain the desired performance level whilst reducing operational cost. The proposed methods are implemented using a Control theoretical feedback technique and a Fuzzy control system. The proposed approach integrates a functional model of basal ganglia (BG) that augments the methodology to select the right set of controllers in a natural biologically plausible way thus reducing the likelihood of oscillation and enhancing the stability perspective of auto-scaling. We evaluate the proposed methodology using a large set of different real workload patterns against some of the existing elasticity methods. The experimental results demonstrate that the biological inspired method performs better in both evaluation perspective (i.e. performance and cost) than all other approaches. Moreover, the Soft switching method reduces the bumpy transitions and oscillatory behaviour observed using the proposed Hard switching approach, thus having the potential to increase the stability of underlying system. In future, we aim to extend the developed framework in the following ways: (1) a detailed theoretical convergence and stability analysis is required to formally evaluate the proposed approach against other state-of-the-art approaches, (2) enhancement of switching rules to learn at runtime and (3) to explore the possibility of enhancing the framework by incorporating the vertical elasticity as well.
Open AccessThis article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
