nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

18.11.2019 | Editorial

Design and management of digital manufacturing and assembly systems in the Industry 4.0 era

verfasst von: Yuval Cohen, Maurizio Faccio, Francesco Pilati, Xifan Yao

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 9/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The advances in Industry 4.0 provide both challenges and opportunities for digital manufacturing and assembly systems. This paper first addresses the state-of-the-art readiness for Industry 4.0 concerning assembly and manufacturing systems through a literature review of the relevant papers recently published. Then it assesses the challenges faced nowadays by assembly and manufacturing systems. Third, it focuses on the most promising future developments and evolution of such production systems as well as their digitalisation. Finally, this manuscript illustrates the content of the papers selected for this special issue. Through the study presented in this special issue, valuable contributions to both theory and application in this area have been achieved, and a useful reference for future research is given.

Nächster Artikel Assembly validation in virtual reality—a demonstrative case

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Stankovic JA (2014) Research directions for the internet of things. IEEE Internet Things J 1(1):3–9MathSciNetCrossRef

Bortolini M, Faccio M, Gamberi M, Pilati F (2017) Multi-objective assembly line balancing considering component picking and ergonomic risk. Comput Ind Eng 112:348–367CrossRef

Nee AYC, Ong SK, Chryssolouris G, Mourtzis D (2012) Augmented reality applications in design and manufacturing. CIRP Ann Manuf Technol 61(2):657–679CrossRef

Davies, R. (2015). Industry 4.0 Digitalisation for productivity and growth. European Parliamentary Research Service, 1.

Yao X, Lin Y (2016) Emerging manufacturing paradigm shifts for the incoming industrial revolution. Int J Adv Manuf Technol 85(5):1665–1676. https://doi.org/10.1007/s00170-015-8076-0 CrossRef

Koren Y, Shpitalni M (2010) Design of reconfigurable manufacturing systems. J Manuf Syst 29(4):130–141CrossRef

Bortolini M, Ferrari E, Gamberi M, Pilati F, Faccio M (2017) Assembly system design in the Industry 4.0 era: a general framework. IFAC-PapersOnLine 50(1):5700–5705CrossRef

Moghaddam M, Cadavid MN, Kenley CR, Deshmukh A (2018) Reference architectures for smart manufacturing: a critical review. J Manuf Syst 49:215–225CrossRef

Azzi A, Battini D, Faccio M, Persona A (2012) Sequencing procedure for balancing the workloads variations in case of mixed model assembly system with multiple secondary feeder lines. Int J Prod Res 50(21):6081–6098CrossRef

10.

GTAI (Germany Trade & Invest) (2014) Industries 4.0-smart manufacturing for the future. GTAI, Berlin

11.

NIST (2017) Smart manufacturing operations planning and control program. National Institute of Standards and Technology, Gaithersburg 2017

12.

Birtel, M., Mohr, F., Hermann, J., Bertram, P., & Ruskowski, M. (2018). Requirements for a humancentered condition monitoring in modular production environments. IFAC-PapersOnLine, 51(11), 909-914.

13.

Rüßmann M, Lorenz M, Gerbert P, Waldner M, Justus J, Engel P, Harnisch M (2015) Industry 4.0: The future of productivity and growth in manufacturing industries. Boston Consulting Group, Boston

14.

Ghobakhloo M (2018) The future of manufacturing industry: a strategic roadmap toward Industry 4.0. J Manuf Technol Manag 29(6):910–936CrossRef

15.

Manavalan E, Jayakrishna K (2019) A review of Internet of Things (IoT) embedded sustainable supply chain for industry 4.0 requirements. Comput Ind Eng 127:925–953CrossRef

16.

Ashton K (2009) That ‘Internet of Things’ Thing. RFiD Journal 22:97–114

17.

Xu LD, He W, Li S (2014) Internet of Things in industries: a survey. IEEE T Ind Inform 10(4):2233–2243CrossRef

18.

Gudmundsson D, Goldberg K (2007) Optimizing robotic part feeder throughput with queueing theory. Assem Autom 27(2):134–140CrossRef

19.

Rosati G, Faccio M, Carli A, Rossi A (2013) Fully flexible assembly systems (F-FAS): a new concept in flexible automation. Assem Autom 33(1):8–21CrossRef

20.

Rosati G, Faccio M, Finetto C, Carli A (2013) Modelling and optimization of fully flexible assembly systems (F-FAS). Assem Autom 33(2):165–174CrossRef

21.

Bortolini M, Faccio M, Gamberi M, Pilati F (2018) Motion Analysis System (MAS) for production and ergonomics assessment in the manufacturing processes. Comput Ind Eng. https://doi.org/10.1016/j.cie.2018.10.046

22.

Faccio M, Ferrari E, Gamberi M, Pilati F (2019) Human Factor Analyser for work measurement of manual manufacturing and assembly processes. Int J Adv Manuf Technol 103:861–877. https://doi.org/10.1007/s00170-019-03570-z CrossRef

23.

Xu B, Xu LD, Cai H, Xie C, Hu J, Bu F (2014) Ubiquitous data accessing method in IoT-based information system for emergency medical services. IEEE T Ind Inform 10(2):1578–1586

24.

Mitra A, Kundu A, Chattopadhyay M, Chattopadhyay S (2017) A cost-efficient one time password-based authentication in cloud environment using equal length cellular automata. J Ind Inf Integr 5:17–25

25.

Moghaddam M, Nof SY (2018) Collaborative service-component integration in cloud manufacturing. Int J Prod Res 56:677–691CrossRef

26.

Chen H (2017) Theoretical foundations for cyber physical systems - a literature review. Journal of Industrial Integration and Management 2(3):1750013. https://doi.org/10.1142/S2424862217500130 CrossRef

27.

NSF (2017) Cyber-physical Systems (CPS). https://www.nsf.gov/funding/pgm_summ.jsp?pims_id=503286.

28.

Weber A (2016) Industry 4.0: myths vs. reality. Assembly 11:28–37

29.

Heineke J, Davis MM (2007) The emergence of service operations management as an academic discipline. J Oper Manag 25(2):364–374CrossRef

30.

Yin Y, Stecke KE, Li D (2018) The evolution of production systems from Industry 2.0 through Industry 4.0. Int J Prod Res 56:848–861CrossRef

31.

Cohen Y, Faccio M, Galizia FG, Mora C, Pilati F (2017) Assembly system configuration through Industry 4.0 principles: the expected change in the actual paradigms. IFAC-PapersOnLine 50(1):14958–14963CrossRef

32.

Zhuang C, Liu J, Xiong H (2018) Digital twin-based smart production management and control framework for the complex product assembly shop-floor. Int J Adv Manuf Technol 96:1149–1163CrossRef

33.

Hanson R, Falkenstrom W, Miettinen M (2017) Augmented reality as a means of conveying picking information in kit preparation for mixed-model assembly. Comput Ind Eng 113:570–575CrossRef

34.

Oberc H, Prinz C, Glogowski P, Lemmerz K, Kuhlenkotter B (2019) Human Robot Interaction – learning how to integrate collaborative robots into manual assembly lines. Procedia Manufacturing 31:26–31CrossRef

35.

Yao F, Keller A, Ahmad M, Ahmad B, Harrison R, Colombo AW (2018) Optimizing the scheduling of autonomous guided vehicle in a manufacturing process. In: international conference on industrial informatics:264–269

36.

Jantsch A, Dutt ND, Rahmani AM (2017) Self-awareness in systems on chip— a survey. IEEE Design & Test of Computers 34(6):8–26CrossRef

37.

3D HUBS (2019) CNC machining: The complete engineering guide. https://www.3dhubs.com/guides/cnc-machining/#basics.

38.

Zhou J, Yao X, Liu M, Zhang J, Tao T (2017) A state-of-the-art review on new emerging intelligent manufacturing paradigms. Comput Integr Manuf Syst 23(3):624–639

39.

Yao X, Zhou J, Zhang J, Boer CR (2017) From intelligent manufacturing to smart manufacturing for Industry 4.0 driven by next generation artificial intelligence and further on. In: International Conference on Enterprise Systems:311–318

40.

Yao X, Zhou J, Lin Y, Li Y, Yu H, Liu Y (2017) Smart manufacturing based on cyber-physical systems and beyond. J Intell Manuf. https://doi.org/10.1007/s10845-017-1384-5 CrossRef

41.

Jing X, Yao X (2019) Towards social cyber-physical production systems. Acta Automat Sin 45(4):637–656

42.

Yao X, Jin H, Zhang J (2015) Towards a wisdom manufacturing vision. Int J Comput Integr Manuf 28(12):1291–1312. https://doi.org/10.1080/0951192x.2014.972462 CrossRef

43.

Yao X-F, Lian Z-T, Yang Y, Zhang Y, Jin H (2014) Wisdom manufacturing: new humans-computers-things collaborative manufacturing model. Comput Integr Manuf Syst 20(6):1490–1498. https://doi.org/10.13196/j.cims.2014.06.yaoxifan.1490.9.20140627 CrossRef

44.

Yao X, Zhang J, Lin Y (2016) The basic theory and technical framework for wisdom manufacturing systems. Systems Engineering - Theory & Practice 36(10):2699–2711

45.

Yao X, Zhou J, Zhang C, Liu M (2017) Proactive manufacturing - a big-data driven emerging manufacturing paradigm. Comput Integr Manuf Syst 23(1):172–185

46.

Yao X, Lei Y, Ge D, Ye J (2019) On big data that drives manufacturing from "Internet Plus" to "AI Plus". China Mechanical Engineering 30(2):134–142

47.

Industrial Internet Consortium (2017) The industrial internet of things volume G1: reference architecture (Version 1.80)

48.

Zhou K, Liu T, Zhou L (2015) Industry 4.0: Towards future industrial opportunities and challenges. In: fuzzy systems and knowledge discovery:2147–2152

49.

Cohen Y, Golan M, Singer G, Faccio M (2018) Workstation-Operator Interaction in 4 0 Era: WOI 4 0. IFAC-PapersOnLine 51(11):399–404CrossRef

50.

Azmi AN, Kamin Y, Noordin MK, Nasir MAN (2018) Towards industrial evolution 4.0: employers' expectations on fresh engineering graduates. International Journal of Engineering and Technology(UAE) 7(4):267–272

51.

Branger J, Pang Z (2015) From automated home to sustainable, healthy and manufacturing home: a new story enabled by the Internet-of-Things and Industry 4.0. Journal of Management Analytics 2(4):314–332CrossRef

52.

Abidi MH, Al-Ahmari A, Ahmad A, Ameen W, Alkhalefah H (2019) Assessment of virtual reality-based manufacturing assembly training system. Int J Adv Manuf Technol:1–17. https://doi.org/10.1007/s00170-019-03801-3

53.

Salazar LAC, Ryashentseva D, LüderA, Vogel-Heuser B (2019) Cyber-physical production systems architecture based on multi-agent’s design pattern–comparison of selected approaches mapping four agent patterns. The International Journal of Advanced Manufacturing Technology.

54.

Kalami H, Urbanic RJ (2019) Design and fabrication of a low-volume, high-temperature injection mould leveraging a ‘rapid tooling’approach. Int J Adv Manuf Technol:1–17. https://doi.org/10.1007/s00170-019-03799-8

55.

Stocker C, Schmid M, Reinhart G (2019) Reinforcement learning–based design of orienting devices for vibratory bowl feeders. Int J Adv Manuf Technol:1–12. https://doi.org/10.1007/s00170-019-03798-9

56.

Cherubini A, Passama R, Navarro B, Sorour M, Khelloufi A, Mazhar O et al (2019) A collaborative robot for the factory of the future: BAZAR. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03806-y

57.

Jayasekera RDMD, Xu X (2019) Assembly validation in virtual reality—a demonstrative case. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03795-y

58.

Yacob F, Semere D, Nordgren E (2019) Anomaly detection in Skin Model Shapes using machine learning classifiers. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03794-z

59.

Zheng Y, Zhao F, Wang Z (2019) Fault diagnosis system of bridge crane equipment based on fault tree and Bayesian network. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03793-0

60.

Huang J, Kwok TH, Zhou C, Xu W (2019) Surfel convolutional neural network for support detection in additive manufacturing. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03792-1

61.

Shafae MS, Wells LJ, Purdy GT (2019) Defending against product-oriented cyber-physical attacks on machining systems. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03805-z

62.

Rossit DA, Tohmé F, Frutos M (2019) An Industry 4.0 approach to assembly line resequencing. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03804-0

63.

Li Q, Zhang D, Wang S, Kucukkoc I (2019) A dynamic order acceptance and scheduling approach for additive manufacturing on-demand production. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03796-x

64.

Zeller, A., Jazdi, N., & Weyrich, M. (2019). Functional verification of distributed automation systems. The International Journal of Advanced Manufacturing Technology, 1-14. https://doi.org/10.1007/s00170-019-03791-2

65.

Papanastasiou S, Kousi N, Karagiannis P, Gkournelos C, Papavasileiou A, Dimoulas K, Baris K, Koukas S, Michalos G, Makris S (2019) Towards seamless human robot collaboration: integrating multimodal interaction. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03790-3

66.

Sanderson D, Chaplin JC, Ratchev S (2019) A Function-Behaviour-Structure design methodology for adaptive production systems. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03823-x

67.

Zhang, H., Zheng, L., Wang, P., & Fan, W. (2019). Intelligent configuring for agile joint jig based on smart composite jig model. The International Journal of Advanced Manufacturing Technology, 1-23. https://doi.org/10.1007/s00170-019-03803-1

68.

Antomarioni S, Pisacane O, Potena D, Bevilacqua M, Ciarapica FE, Diamantini C (2019) A predictive association rule-based maintenance policy to minimize the probability of breakages: application to an oil refinery. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03822-y

69.

Gavidel, S. Z., Lu, S., & Rickli, J. L. (2019). Performance analysis and comparison of machine learning algorithms for predicting nugget width of resistance spot welding joints. The International Journal of Advanced Manufacturing Technology, 1-18. https://doi.org/10.1007/s00170-019-03821-z

70.

Shoval S, Efatmaneshnik M (2019) Managing complexity of assembly with modularity: a cost and benefit analysis. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03802-2

71.

Klumpp M, Hesenius M, Meyer O, Ruiner C, Gruhn V (2019) Production logistics and human-computer interaction—state-of-the-art, challenges and requirements for the future. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03785-0

72.

Mezgebe TT, Demesure G, El Haouzi HB, Pannequin R, Thomas A (2019) CoMM: a consensus algorithm for multi-agent-based manufacturing system to deal with perturbation. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03820-0

73.

Far MH, Haleh H, Saghaei A (2019) A fuzzy bi-objective flexible cell scheduling optimization model under green and energy-efficient strategy using Pareto-based algorithms: SATPSPGA, SANRGA, and NSGA-II. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03797-w

74.

Remeseiro B, Tarrío-Saavedra J, Francisco-Fernández M, Penedo MG, Naya S, Cao R (2019) Automatic detection of defective crankshafts by image analysis and supervised classification. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03819-7

Titel: Design and management of digital manufacturing and assembly systems in the Industry 4.0 era
verfasst von: Yuval Cohen
Maurizio Faccio
Francesco Pilati
Xifan Yao
Publikationsdatum: 18.11.2019
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 9/2019
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-04595-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9/2019

Cyber-physical production systems architecture based on multi-agent’s design pattern—comparison of selected approaches mapping four agent patterns

Anomaly detection in Skin Model Shapes using machine learning classifiers

Defending against product-oriented cyber-physical attacks on machining systems

Towards seamless human robot collaboration: integrating multimodal interaction

Modeling, planning, and scheduling of shop-floor assembly process with dynamic cyber-physical interactions: a case study for CPS-based smart industrial robot production

A fuzzy bi-objective flexible cell scheduling optimization model under green and energy-efficient strategy using Pareto-based algorithms: SATPSPGA, SANRGA, and NSGA-II

Premium Partner

Marktübersichten