nach oben

Erschienen in:

02.05.2023 | Original Article

Dislocation evolution and induced precipitation on corrosion resistance of a novel Al-Mg-Zn-Er-Zr alloy during hot compression

verfasst von: Da Xue, Wu Wei, Wei Shi, Xiao-Rong Zhou, Sheng-Ping Wen, Xiao-Lan Wu, Kun-Yuan Gao, Li Rong, Peng Qi, Hui Huang, Zuo-Ren Nie

Erschienen in: Rare Metals | Ausgabe 7/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Al-Mg-Zn-Er-Zr alloy was compressed in temperature range from 300 to 500 °C to investigate the microstructure evolution. Molecular dynamics simulations were used to study the mechanical behavior and dislocation evolution. The results showed that mobile dislocations are widely distributed in alloys and make important contributions to coordinate compressive deformation. The sessile dislocations hinder the deformation, and the content is about 1/20 of that of mobile dislocations. Continuous dynamic recrystallization (CDRX) is considered to be the main recrystallization mechanism. The accumulation of dislocations can provide element diffusion channels and driving force for τ (Mg₃₂[Al, Zn]₄₉) phase precipitation, resulting in the forced precipitation of discontinuous τ phase to replace the continuous β phase (Al₃Mg₂), which reduces the corrosion potential, resulting in increased corrosion resistance.

Graphical abstract

Vorheriger Artikel Quasi-static and dynamic plastic deformation behavior in titanium with vanadium addition

Nächster Artikel Strain-controlled fatigue characteristics of a cast Mg–Nd–Zn under peak-aged and over-aged conditions

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

[1]

Lee BH, Kim SH, Park JH, Kim HW, Lee JC. Role of Mg in simultaneously improving the strength and ductility of Al–Mg alloys. Mater Sci Eng A. 2016;657:115. https://doi.org/10.1016/j.msea.2016.01.089.CrossRef

[2]

Wen SP, Wang W, Zhao WH, Wu XL, Gao KY, Huang H, Nie ZR. Precipitation hardening and recrystallization behavior of Al-Mg-Er-Zr alloys. J Alloy Compd. 2016;687:143. https://doi.org/10.1016/j.jallcom.2016.06.045.CrossRef

[3]

Ding YS, Gao KY, Huang H, Wen SP, Wu XL, Nie ZR, Guo SS, Shao R, Huang C, Zhou DJ. Nucleation and evolution of β phase and corresponding intergranular corrosion transition at 100–230 °C in 5083 alloy containing Er and Zr. Mater Design. 2019;174:107778. https://doi.org/10.1016/j.matdes.2019.107778.CrossRef

[4]

Zhao YF, Polyakov MN, Mecklenburg M, Kassner ME, Hodge AM. The role of grain boundary plane orientation in the β phase precipitation of an Al–Mg alloy. Scripta Mate. 2014;89:49. https://doi.org/10.1016/j.scriptamat.2014.07.003.CrossRef

[5]

Lim ML, Kelly RG, Scully JR. Overview of intergranular corrosion mechanisms, phenomenological observations, and modeling of AA5083. Corrosion. 2015;72:198. https://doi.org/10.5006/1818.CrossRef

[6]

Xue D, Wei W, Shi W, Guo YW, Wen SP, Wu XL, Huang H, Nie ZR. Effect of cold rolling on mechanical and corrosion properties of stabilized Al–Mg–Mn–Er–Zr alloy. J Mater Res Technol. 2021;15:6329. https://doi.org/10.1016/j.jmrt.2021.11.075.CrossRef

[7]

Lloyd DJ, Jin H. Inhomogeneous yielding and work hardening of a fine grained Al–Mg alloy. Mater Sci Eng A. 2013;585:455. https://doi.org/10.1016/j.msea.2013.07.044.CrossRef

[8]

Liu HL, Li P, Xue KM, Qian CH, Hua R. Microstructural evolution and fracture mechanism of a new Al–Zn–Mg–Cu–Zr alloy processed by equal-channel angular pressing. Rare Met. 2022;41(10):3546. https://doi.org/10.1007/s12598-016-0706-7.CrossRef

[9]

Zha M, Meng XT, Zhang HM, Zhang XH, Jia HL, Li YJ, Zhang JY, Wang HY, Jiang QC. High strength and ductile high solid solution Al-Mg alloy processed by a novel hard-plate rolling route. J Alloy Compd. 2017;728:872. https://doi.org/10.1016/j.jallcom.2017.09.017.CrossRef

[10]

Son HW, Lee JC, Cho CH, Hyun SK. Effect of Mg content on the dislocation characteristics and discontinuous dynamic recrystallization during the hot deformation of Al–Mg alloy. J Alloy Compd. 2021;887:161397. https://doi.org/10.1016/j.jallcom.2021.161397.CrossRef

[11]

Jiang JY, Jiang F, Huang HF, Zhang MH, Tang ZQ, Tong MM. Hot deformation analysis and microstructure evolution of Al–Mg–Mn–Sc–Zr alloy by isothermal compression. J Alloy Compd. 2021;858:157655. https://doi.org/10.1016/j.jallcom.2020.157655.CrossRef

[12]

Feng Q, Song XY, Xie HX, Wang HB, Liu XM, Yin FX. Deformation and plastic coordination in WC-Co composite––molecular dynamics simulation of nanoindentation. Mater Design. 2017;120:193. https://doi.org/10.1016/j.matdes.2017.02.010.CrossRef

[13]

Fang J, Liu XM, Lu H, Liu XW, Song XY. Crystal defects responsible for mechanical behaviors of a WC–Co composite at room and high temperatures––a simulation study. Acta Cryst. 2019;75:134. https://doi.org/10.1107/S2052520619000295.CrossRef

[14]

Ge XR, Liu XM, Hou C, Lu H, Tang FW, Meng XF, Xu WW, Song XY. Distinguishing contributions of ceramic matrix and binder metal to the plasticity of nanocrystalline cermets. IUCrJ. 2020;7:2052. https://doi.org/10.1107/s2052252519015471.CrossRef

[15]

Li ZZ, Yan HG, Chen JH, Xia WJ, Zhu HM, Su B, Li XY, Song M. Enhancing damping capacity and mechanical properties of Al-Mg alloy by high strain rate hot rolling and subsequent cold rolling. J Alloy Compd. 2022;908:164677. https://doi.org/10.1016/j.jallcom.2022.164677.CrossRef

[16]

Lim MLC, Matthews R, Oja M, Tryon R, Kelly RG, Scully JR. Model to predict intergranular corrosion propagation in three dimensions in AA5083-H131. Mater Design. 2016;96:131. https://doi.org/10.1016/j.matdes.2016.01.089.CrossRef

[17]

Lyndon JA, Gupta RK, Gibson MA, Birbilis N. Electrochemical behaviour of the β-phase intermetallic (Mg₂Al₃) as a function of pH as relevant to corrosion of aluminium-magnesium alloys. Corros Sci. 2013;70:290. https://doi.org/10.1016/j.corsci.2012.12.022.CrossRef

[18]

Zhang R, Knight SP, Holtz RL, Goswami R, Davies CHJ, Birbilis N. A survey of sensitization in 5xxx series aluminum alloys. Corrosion. 2016;72:144. https://doi.org/10.5006/1787.CrossRef

[19]

Carroll MC, Gouma PI, Daehn GS, Mills MJ. Effects of minor Cu additions on a Zn-modified Al-5083 alloy. Mater Sci Eng A. 2001;319:425. https://doi.org/10.1016/S0921-5093(00)02021-9.CrossRef

[20]

Ma Q, Zhang D, Zhuang LZ, Zhang JS. Intergranular corrosion resistance of Zn modified 5xxx series Al alloy during retrogression and re-aging treatment. Mater Charact. 2018;144:264. https://doi.org/10.1016/j.matchar.2018.07.008.CrossRef

[21]

Meng CY, Zhang D, Cui H, Zhuang LZ, Zhang JS. Mechanical properties, intergranular corrosion behavior and microstructure of Zn modified Al–Mg alloys. J Alloy Compd. 2014;617:925. https://doi.org/10.1016/j.jallcom.2014.08.099.CrossRef

[22]

Birbilis N, Bucbbeit RG. Electrochemical characteristics of intermetallic phases in aluminum alloys. J Electrochem Soc. 2005;152:140. https://doi.org/10.1016/j.apsusc.2005.12.123.CrossRef

[23]

Plimpton S. Fast parallel algorithms for short-range molecular dynamics. J Comput Phys. 1995;117:1. https://doi.org/10.1006/jcph.1995.1039.CrossRef

[24]

Stukowski A, Albe K. Extracting dislocations and non-dislocation crystal defects from atomistic simulation data. J Geophys Res-Atmos. 2010;119:2131. https://doi.org/10.1088/0965-0393/18/8/085001.CrossRef

[25]

Cottrell AH. Theory of dislocations. Prog Met Phys. 1953;4:205. https://doi.org/10.1016/0502-8205(49)90004-0.CrossRef

[26]

Yamakov V, Wolf D, Phillpot SR, Gleiter H. Dislocation–dislocation and dislocation–twin reactions in nanocrystalline Al by molecular dynamics simulation. Acta Mater. 2003;14:4135. https://doi.org/10.1016/S1359-6454(03)00232-5.CrossRef

[27]

Dierke H, Krawehl F, Graff S, Forest S, Šachl J, Neuhäuser H. Portevin–LeChatelier effect in Al–Mg alloys: influence of obstacles––experiments and modelling. Comput Mater Sci. 2007;39:106. https://doi.org/10.1016/j.commatsci.2006.03.019.CrossRef

[28]

Kovács Z, Lendvai J, Vörös G. Localized deformation bands in Portevin–LeChâtelier plastic instabilities at a constant stress rate. Mater Sci Eng A. 2000;279:179. https://doi.org/10.1016/s0921-5093(99)00628-0.CrossRef

[29]

Wu H, Wen SP, Huang H, Li BL, Wu XL, Gao KY, Wang W, Nie ZR. Effects of homogenization on precipitation of Al₃(Er, Zr) particles and recrystallization behavior in a new type Al-Zn-Mg-Er-Zr alloy. Mater Sci Eng A. 2017;689:313. https://doi.org/10.1016/j.msea.2017.02.071.CrossRef

[30]

Sitdikov O, Garipova R, Avtokratova E, Mukhametdinova O, Markushev M. Effect of temperature of isothermal multidirectional forging on microstructure development in the Al-Mg alloy with nano-size aluminides of Sc and Zr. J Alloy Compd. 2018;746:520. https://doi.org/10.1016/j.jallcom.2018.02.277.CrossRef

[31]

Guo WB, Wang G, Jiang FL, Liu C, Chen R, Zhang H. Dynamic softening and microstructural evolution during hot deformation of Al–Cu–Mg–Zr alloys with different homogenization cooling rates. Rare Met. 2021;40(3):626. https://doi.org/10.1007/s12598-020-01382-9.CrossRef

[32]

Jin SB, Tao NR, Marthinsen K, Li YJ. Deformation of an Al–7Mg alloy with extensive structural micro-segregations during dynamic plastic deformation. Mater Sci Eng A. 2015;628:160. https://doi.org/10.1016/j.msea.2015.01.057.CrossRef

[33]

Lu LL, Zhang YM, Zhou F, Song KX, Li SG. Study on microstructure evolution of Ti–6Al–3Nb–2Zr–1Mo alloy with bimodal structure during hot compression in the near β region. J Mater Res. 2021;15:1747. https://doi.org/10.1016/j.jmrt.2021.09.040.CrossRef

[34]

Zhou LY, Chen WX, Feng SB, Sun MY, Xu B, Li DZ. Dynamic recrystallization behavior and interfacial bonding mechanism of 14Cr ferrite steel during hot deformation bonding. J Mater Sci Technol. 2020;43:92. https://doi.org/10.1016/j.jmst.2020.01.010.CrossRef

[35]

Sun YG, Zhang CJ, Feng H, Zhang SZ, Han JC, Zhang WG, Zhao ET, Wang HW. Dynamic recrystallization mechanism and improved mechanical properties of a near α high temperature titanium alloy processed by severe plastic deformation. Mater Charact. 2020;163:110281. https://doi.org/10.1016/j.matchar.2020.110281.CrossRef

[36]

Jia D, Sun WR, Xu DS, Liu F. Dynamic recrystallization behavior of GH4169G alloy during hot compressive deformation. J Mater Sci Technol. 2019;35:1851. https://doi.org/10.1016/j.jmst.2019.04.018.CrossRef

[37]

Embury JD, Nicholson RB. Dislocation sources in an aluminium alloy. Acta Metall. 1963;11:347. https://doi.org/10.1016/0001-6160(63)90159-7.CrossRef

[38]

Beatrice CRS, Garlipp W, Cilense M, Adorno AT. Vacancy-Mg atom binding energy in Al-Mg alloy. Scripta Metal Mater. 1995;32:23. https://doi.org/10.1016/S0956-716X(99)80005-3.CrossRef

[39]

Mehrer H. Diffusion in solid metals and alloys. Defect Diffus Forum. 1970;4:296. https://doi.org/10.4028/www.scientific.net/ddf.4.296.CrossRef

[40]

Divinski SV, Bokstein BS. Recent advances and unsolved problems of grain boundary diffusion. Defect Diffus Forum. 2011;309:1. https://doi.org/10.4028/www.scientific.net/ddf.309-310.1.CrossRef

[41]

Buranova Y, Kulitskiy V, Peterlechner M, Mogucheva A, Kaibyshev R, Divinski S, Wilde G. Al₃(Sc, Zr)-based precipitates in Al–Mg alloy: effect of severe deformation. Acta Mater. 2017;124:210. https://doi.org/10.1016/j.actamat.2016.10.064.CrossRef

[42]

Gusak AM, Tu KN. Interaction between the Kirkendall effect and the inverse Kirkendall effect in nanoscale particles. Acta Mater. 2009;57:3367. https://doi.org/10.1016/j.actamat.2009.03.043.CrossRef

[43]

Goswami R, Spanos G, Pao PS, Holtz RL. Precipitation behavior of the β phase in Al-5083. Mater Sci Eng A. 2010;527:1089. https://doi.org/10.1016/j.msea.2009.10.007.CrossRef

Titel: Dislocation evolution and induced precipitation on corrosion resistance of a novel Al-Mg-Zn-Er-Zr alloy during hot compression
verfasst von: Da Xue
Wu Wei
Wei Shi
Xiao-Rong Zhou
Sheng-Ping Wen
Xiao-Lan Wu
Kun-Yuan Gao
Li Rong
Peng Qi
Hui Huang
Zuo-Ren Nie
Publikationsdatum: 02.05.2023
Verlag: Nonferrous Metals Society of China
Erschienen in: Rare Metals / Ausgabe 7/2023
Print ISSN: 1001-0521
Elektronische ISSN: 1867-7185
DOI: https://doi.org/10.1007/s12598-022-02258-w

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphical abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2023

Formation of novel TRIP-ductilized bulk metallic glass composites by manipulating nucleation kinetics via minor alloying

Shearing-force-driven delamination of waste residue into oxidatively stable MXene composites for high-performance Si anode

Martensitic transformation and magnetic properties in Mn49−xCuxNi41Sn10(x = 0–2)

Quasi-static and dynamic plastic deformation behavior in titanium with vanadium addition

Li-ion transport in solid-state electrolyte of Li1–xAl1–xSi2+xO6: an ab initio study

Morphology enhancement of SiO2 aerogel films grown on Si substrate using dense SiO2 buffer layer

Premium Partner

Marktübersichten