nach oben

Wood Science and Technology

Erschienen in:

01.09.2012 | Original

Effect of accelerated aging on some physical and mechanical properties of bamboo

verfasst von: Eylem Dizman Tomak, Elif Topaloglu, Nurgul Ay, Umit C. Yildiz

Erschienen in: Wood Science and Technology | Ausgabe 5/2012

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The objective of this study was to investigate the effect of accelerated aging on compression strength, modulus of rupture, modulus of elasticity, color change, volumetric swelling, and volumetric shrinkage of bamboo specimens with and without node sections. In the study, these properties were compared with those of Scots pine and beech wood specimens. Depending on bamboo sections, the aging procedure reduced modulus of rupture, modulus of elasticity, and compression strength. Bamboo specimens showed relatively high strength properties compared to wood specimens due to having high density. Strength properties increased from bottom to top of bamboo culms. The presence of nodes in the specimens reduced compression strength and modulus of rupture but affected modulus of elasticity slightly. Remarkable color changes in specimens were observed after aging. Volumetric swelling and shrinkage of bamboo specimens exposed to aging decreased probably due to heat effect of aging procedure.

Vorheriger Artikel The breakdown mechanism of earlywood and latewood in refining

Nächster Artikel Sorption of acetylated pine wood decayed by brown rot, white rot and soft rot: different fungi—different behaviours

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ahmad M (2000) Analysis of Calcutta bamboo for structural composite materials. Dissertation, Faculty of Virginia Polytechnic Institute and State University

Ahmad A, Kamke FA (2005) Analysis of Calcutta bamboo for structural composite materials: Physical and mechanical properties. Wood Sci Technol 39:448–459CrossRef

American Society for Testing and Materials (1989) Standard test method for evaluating the properties of wood-base fiber and particle panel materials. ASTM Stand D 1037–89, West Conshohocken, PA

Bhargava RL (1987) Bamboo. In: Hamilton F, Leopold B (eds) Pulp and paper manufacture, vol 3 Secondary fibers and non-wood pulping, 3rd ed. The Joint Textbook Committee of the Paper Industry (TAPPI–CPPA), Atlanta

Boonstra MJ (2008) A two-stage thermal modification of wood. Dissertation, Ghent University

Genc M (2009) Basic principles of Sylviculture. 2nd Chapter (in Turkish) http://ormanweb.sdu.edu.tr/dersler/mgenc/ste/ste2.pdf. Assessed 27 February 2011

Hamdam H, Anwar UMK, Zaidon A, Tamizi MM (2009) Mechanical properties and failure behavior of Gigantochloa scortechinii. J Trop Forest Sci 21:336–344

Kajita H, Mukudai J, Yano H (1991) Durability evaluation of particleboards by accelerated aging tests. Wood Sci Technol 25:239–249CrossRef

Kartal SN, Green F III (2003) Decay and termite resistance of medium density fiberboard (MDF) made from different wood species. Int Biodeter Biodeg 5:29–35CrossRef

Kim JS, Lee KH, Cha MY, Kim YS (2008) Anatomical, physical and chemical changes of Bamboo (Phyllostachys puberscence) during weathering processes. The International Research Group on Wood Protection, Stockholm. IRG/WP 08-10650

Kocaefe D, Poncsak S, Boluk Y (2008) Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen. BioResources 3:517–537

Kojima Y, Suzuki S (2011) Evaluation of wood-based panel durability using bending properties after accelerated aging treatments. J Wood Sci 57:126–133

Lee AWC, Xuesong B, Peralta PN (1994) Selected physical and mechanical properties of giant timber bamboo grown in South Carolina. Forest Prod J 44:40–46

Leithoff H, Peek RD (2001) Heat treatment of bamboo. The International Research Group on Wood Protection, Stockholm. IRG/WP 01-40216

Li X (2004) Physical, chemical, and mechanical properties of bamboo and its utilization potential for fiberboard manufacturing. Dissertation, Louisiana State University

Liese W (1992) The structure of bamboo in relation to its properties and utilization. In: Zhu S, Li W, Zhang X, Wang Z (eds) Bamboo and its use. Proceedings of the International Symposium on Industrial Use of Bamboo, 7–11 December. Beijing, China

Liese W (1998) The anatomy of bamboo culms. International Network for Bamboo and Rattan, Beijing

Lima HC, Willrich FL, Barbosa NP, Rosa MA, Cunha BS (2008) Durability analysis of bamboo as concrete reinforcement. Mater Struct 41:981–989CrossRef

Lin CJ, Tsai MJ, Wang SY (2006) Nondestructive evaluation techniques for assessing dynamic modulus of elasticity of moso bamboo (Phyllosachys edulis) lamina. J Wood Sci 5:342–347CrossRef

Lo TY, Cui HZ, Leung HC (2004) The effect of fiber density on strength capacity of bamboo. Mater Lett 58:2595–2598CrossRef

Naik NK (2010) Mechanical and physico-chemical properties of bamboos. http://www.bambootech.org/files/mechanicaltesting%20report.pdf. Accessed 9 June 2010

Ohmae Y, Nakano T (2009) Water adsorption properties of bamboo in the longitudinal direction. Wood Sci Technol 43:415–422CrossRef

Ohmae Y, Saito Y, Inoue M, Nakano T (2009a) Mechanism of water adsorption capacity change of bamboo by heating. Eur J Wood Prod 67:13–18CrossRef

Ohmae Y, Saito Y, Inoue M, Nakano T (2009b) Water adsorption process of bamboo heated at low temperature. J Wood Sci 55:13–17CrossRef

Okkonen EA, River BH (1996) Outdoor aging of wood-based panels and correlation with laboratory aging: Part 2. Forest Prod J 46:68–74

Poblete H, Cuevas H, Diaz-Vaz JE (2009) Property characterization of Chusquea culeou, a bamboo growing in Chile. Maderas Cienc tecnol 11:129–138CrossRef

Qin L, Yu WJ (2009) Research on surface color, properties of thermo-treated reconstituted bamboo lumber after artificial weathering test. Advanced Materials Research 79–82:1395–1398CrossRef

Sahin HI (2006) The determination of kraft pulping conditions of Bamboo (Phyllostachys bambusoides). Dissertation, Karadeniz Technical University

Shao S, Wen G, Jin Z (2008) Changes in chemical characteristics of bamboo (Phyllostachys pubescens) components during steam explosion. Wood Sci Technol 42:439–451CrossRef

Shao ZP, Zhou L, Liu YM, Wu ZM, Arnaud C (2010) Differences in structure and strength between internode and node sections of moso bamboo. J Trop Forest Sci 22:133–138

Tjeerdsma BF, Boonstra M, Militz H (1998) Thermal modification of non-durable wood species. 2. Improved wood properties of thermally treated wood. The International Research Group on Wood Preservation IRG/WP 98-40124

Tran VH (2010) Growth and quality of indigenous bamboo species in the mountainous regions of Northern Vietnam. Dissertation, Georg-August-Universität

Turkish Standard Institution (1976a) Wood-determination of moisture content for physical and mechanical tests. TS 2471, Ankara

Turkish Standard Institution (1976b) Wood-determination of density for physical and mechanical tests. TS 2472, Ankara

Turkish Standard Institution (1977) Wood-determination of ultimate stress in compression parallel to grain. TS 2595, Ankara

Turkish Standard Institution (1984a) Wood-determination of volumetric shrinkage. TS 4085, Ankara

Turkish Standard Institution (1984b) Wood-determination of volumetric swelling. TS 4086, Ankara

Wahab R, Mohamad A, Samsi HW, Yunus AAM, Moktar J (2006) Physical characteristics, anatomy and properties of managed Gigantochloa scortechinii natural bamboo stands. J Plant Sci 1:144–153CrossRef

Yildiz S (2002) Physical, mechanical, technologic and chemical properties of Fagus orientalis and Picea orientalis wood treated by heating. Dissertation, Karadeniz Technical University

Yildiz S, Yildiz UC, Tomak ED (2011) The effects of natural weathering on the properties of heat treated alder wood. BioResources 6:2504–2521

Yu H, Fei B, Ren H, Jiang Z, Liu X (2008a) Variation in tensile properties and relationship between tensile properties and air-dried density for moso bamboo. Front For China 3:127–130CrossRef

Yu HQ, Jiang ZH, Hse CY, Shupe TF (2008b) Selected physical and mechanical properties of moso bamboo (Phyllostachys pubescens). J Trop Forest Sci 20:258–263

Titel: Effect of accelerated aging on some physical and mechanical properties of bamboo
verfasst von: Eylem Dizman Tomak
Elif Topaloglu
Nurgul Ay
Umit C. Yildiz
Publikationsdatum: 01.09.2012
Verlag: Springer-Verlag
Erschienen in: Wood Science and Technology / Ausgabe 5/2012
Print ISSN: 0043-7719
Elektronische ISSN: 1432-5225
DOI: https://doi.org/10.1007/s00226-011-0454-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 5/2012

Variation of measured cross-sectional cell dimensions and calculated water vapor permeability across a single growth ring of spruce wood

Viscoelastic properties of wood materials characterized by nanoindentation experiments

Influence of temperature and steam environment on set recovery of compressive deformation of wood

Western red cedar extractives associated with durability in ground contact

Sorption of acetylated pine wood decayed by brown rot, white rot and soft rot: different fungi—different behaviours

Fire-retarding properties of nano-silver in solid woods