nach oben

Journal of Materials Engineering and Performance

Erschienen in:

19.02.2022 | Technical Article

Effect of Ce on Hot Tearing Sensitivity of As-Cast Al-Cu-Mg-Y Alloy

verfasst von: Yuxiang Wang, Chunyu Yue, Ming Su, Xiaoguang Yuan, Bowen Zheng

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 8/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The effect of rare earth Ce on the hot tearing sensitivity of the Al-Cu-Mg-Y alloy is studied by using a self-made multi-channel "cross" hot tearing test device. Based on hot tearing sensitivity, solidification temperature, shrinkage force and microstructure of the as-cast Al-4.4Cu-1.5Mg-0.15Zr-0.15Y alloy with different contents of Ce, the influence regularity and mechanism of rare earth Ce on the hot tearing are systematically studied. The results show that the hot tearing resistance of the alloy is evidently improved due to grain refinement and the increase of feeding capacity of liquid phase in the later stage of solidification with addition of Ce. The average grain size, the HTS₁ value and the CSC value of the alloy firstly decrease and then increase with the content of Ce increases from 0 to 2.5 wt.%. Compared with the alloy without Ce, the average grain size of the alloy with addition of 1.0 wt.% Ce reduces from 150.04 to 90.23 μm. The fluidity and hot tearing resistance of the alloy are significantly enhanced owing to the generated Al₈Cu₄Ce phase. Furthermore, when the Ce content exceeds 1.0 wt.%, which leads to the microstructure coarsening and the rise of the hot tearing sensitivity of the alloy compared with addition of 1.0 wt.%.

Vorheriger Artikel Hot-Working Properties of Ni-Based Superalloy GH4169 in Different Initial States

Nächster Artikel Dry Sliding Wear Characteristics of NiP/TiN Duplex Coated Aluminum Alloy and Wear Analysis Using Response Surface Method

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. Lotfy, A.V. Pozdniakov, V.S. Zolotorevskiy et al., Novel Preparation of Al-5%Cu/BN and Si3N4 Composites Withanalyzing Microstructure, Thermal and Mechanical Properties, Mater. Charact., 2018, 136, p 144–151. https://doi.org/10.1016/j.matchar.2017.12.015CrossRef

H. Kamguokamga, D. Larouche, M. Bournane et al., Hot Tearing of Aluminum-Copper B206 Alloys with Iron and Silicon Additions, Metall. Mater. Trans. A., 2010, 527(27), p 7413–7423. https://doi.org/10.1016/j.msea.2010.08.025CrossRef

F. D’Elia, C. Ravindran, and D. Sediako, Interplay Among Solidification, Microstructure, Residual Strain and Hot Tearing in B206 Aluminum Alloy, Mater. Sci. Eng., A, 2015, 624, p 169–180. https://doi.org/10.1016/j.msea.2014.11.057CrossRef

V.S. Aigbodion, and S.B. Hassan, Experimental Correlations Between Wear Rate and Wear Parameter of Al-Cu-Mg/Bagasse Ash Particulate Composite, Mater. Des., 2010, 31(4), p 2177–2180. https://doi.org/10.1016/j.matdes.2009.10.055CrossRef

Y. Yoshida, H. Esaka, and K. Shinozuka, Effect of Solidified Structure on Hot Tearing in Al-Cu Alloy, IOP Confer. Ser. Mater. Sci. Eng., 2015, 84(1), 012059. https://doi.org/10.1088/1757-899X/84/1/012059CrossRef

A.K. Birru and D.B. Karunakar, Effects of Grain Refinement and Residual Elements on Hot Tearing of A713 Aluminium Cast Alloy, Trans. Nonferr. Metals Soc. China., 2016, 26(7), p 1783–1790. https://doi.org/10.1016/S1003-6326(16)64291-7CrossRef

Y. Li, H.X. Li, and L. Katgerman, Recent Advances in Hot Tearing During Casting of Aluminium Alloys, Prog. Mater Sci., 2021, 117, 100741. https://doi.org/10.1016/j.pmatsci.2020.100741CrossRef

C.C. Tao, H.J. Huang, X.G. Yuan et al., The Effect of V Element on the Hot Cracking Properties of Al-4.4Cu-1.5Mg-0.15Zr Alloy, Foundry., 2020, 69(2), p 127–134. https://doi.org/10.1007/s40962-021-00666-9CrossRef

S.G. Shabestari and M.H. Ghonchen, Investigation on the Effect of Cooling Rate on Hot Tearing Susceptibility of Al2024 Alloy Using Thermal Analysis, Metall. Mater. Trans. B., 2015, 46, p 2438–2448. https://doi.org/10.1007/s11663-015-0450-7CrossRef

10.

Y. Sun, Z. Du, Y. Su et al., Effect of Zn/Mg/Cu Additions on Hot Cracking Tendency and Performances of Al-Cu-Mg-Zn Alloys for Liquid Forging, J. Wuhan Univ. Technol.-Mater Sci Ed., 2020, 35(1), p 176–182. https://doi.org/10.1007/s11595-020-2241-5CrossRef

11.

M.J. Benoit, S.M. Zhu, T.B. Abbott et al., Evaluation of the Effect of Rare Earth Alloying Additions on the Hot Tearing Susceptibility of Aluminum Alloy 7150 During Rapid Solidification, Metall. Mater. Trans. A., 2020, 51(10), p 5213–5227. https://doi.org/10.1007/s11661-020-05930-xCrossRef

12.

X.Q. Wu, H. Yan, F.H. Chen et al., Effects of (Pr+Ce) Addition and Heat Treatments on Microstructure and Mechanical Properties of Al-5Si-1.2Cu Alloy, J. Mater. Eng. Perform., 2020, 29(3), p 1810–1819. https://doi.org/10.1007/s11665-020-04725-wCrossRef

13.

X.B. Zhang, D. Li, L. Zeng et al., Effect of Y on the Hot Tearing Susceptibility of 3Y2O3/Al5Cu Composite, J. Alloy. Compd., 2020, 849, 156152. https://doi.org/10.1016/j.jallcom.2020.156152CrossRef

14.

H.D. Chen, E.J. Guo, Y.C. Feng et al., Effect of Sm on Hot Cracking Susceptibility of Mg-6Al-2Ca-Zn Alloy, Hot Work. Technol., 2020, 49(12), p 21–26. https://doi.org/10.14158/j.cnki.1001-3814.20190661CrossRef

15.

X.X. Li, S.M. Liu, Z. Liu et al., Influence of Nd on Hot Tearing Susceptibility and Mechanism of Mg-Zn-Y-Zr Alloys, J. Mater. Eng. Perform., 2020, 29(10), p 6714–6726. https://doi.org/10.1007/s11665-020-05144-7CrossRef

16.

M. Li, H. Wang, Z. Wei et al., The Effect of Y on the Hot-Tearing Resistance of Al-5 wt.% Cu Based Alloy, Mater. Des., 2010, 31(5), p 2483–2487. https://doi.org/10.1016/j.matdes.2009.11.044CrossRef

17.

C.C. Tao, X.G. Yuan, J. Liu et al., Effect of La on Hot Cracking Susceptibility of Al-Cu-Mg Alloy, Mater. Res. Exp., 2019, 6(10), p 105802. https://doi.org/10.1088/2053-1591/ab41c8CrossRef

18.

C.C. Tao, H.J. Huang, X.G. Yuan et al., Effect of Y Element on Microstructure and Hot Tearing Sensitivity of As-Cast Al-4.4Cu-1.5Mg-0.15Zr Alloy, Int. J. Metalcast., 2021 https://doi.org/10.1007/s40962-021-00666-9CrossRef

19.

W.J. Liu, B. Jiang, Q.S. Yang et al., Effect of Ce Addition on Hot Tearing Behavior of AZ91 Alloy, Prog. Natl Sci. Mater. Int., 2019, 29(4), p 453–456. https://doi.org/10.1016/j.pnsc.2019.07.002CrossRef

20.

S.K. Xie, R.X. Yi, Q. Huang et al., Effects of Rare Earth Ce on Fluidity and Hot Tearing Trend of Al4.5Cu Alloy, Nonferrous Metals., 2011, 6, p 33–36. https://doi.org/10.3969/j.issn.1007-7545.2011.06.008CrossRef

21.

Y. Tian, X.G. Yuan, H.J. Huang et al., Effect of Mg Addition on Hot Tearing Properties of Al-4.4Cu-0.15Zr Alloy, Foundry., 2020, 3, p 246–253.

22.

D. Argo, M. Pekguleryuz, P. V ermette, M. Lefebvre, Proceedings of the Die Casting 2001. Cincinnati, OH. 2001, p 181–186.

23.

Y.G. Sun, Z.M. Du, and Y.N. Su, Effect of Zn/Mg/Cu Additions on Hot Cracking Tendency and Performances of Al-Cu-Mg-Zn Alloys for Liquid Forging, J. Wuhan Univ. Technol., 2020, 35(1), p 176–182. https://doi.org/10.1007/s11595-020-2241-5CrossRef

24.

G. Cao and S. Kou, Hot cracking of binary Mg-Al alloy castings, Mater. Sci. Eng., A, 2006, 417, p 230–238. https://doi.org/10.1016/j.msea.2005.10.050CrossRef

25.

T.W. Clyne and G.J. Davies, The influence of composition on solidification cracking susceptibility in binary alloy systems, Br Found., 1981, 74, p 65–73.

26.

T.W. Clyne and G.J. Davies, A quantitative solidification cracking test for castings and an evaluation of cracking in Al-Mg alloys, Br Found., 1975, 68, p 238–244.

27.

J.F. Song, F.S. Pan, B. Jiang et al., A review on hot tearing of magnesium alloys, J. Magnesium Alloys, 2016, 4(3), p 151–172. https://doi.org/10.1016/j.jma.2016.08.003CrossRef

28.

L. Bichler and C. Ravindran, New developments in assessing hot tearing in magnesium alloy castings, Mater. Des., 2010, 31(1), p 17–23. https://doi.org/10.1016/j.matdes.2009.12.003CrossRef

29.

T.A. Davis, L. Bichler, F. D’Elia et al., Effect of TiBoron the grain refinement and hot tearing susceptibility of AZ91D magnesium alloy, J. Alloy. Compd., 2018, 759, p 70–79. https://doi.org/10.1016/j.jallcom.2018.05.129CrossRef

30.

C. Lin, H. Zhang, L. Bi et al., Research Status of Casting Defects of Cast Al-Cu Alloys, Mater. Rep. A., 2016, 30(11), p 143–149. https://doi.org/10.11896/j.issn.1005-023X.2016.21.021CrossRef

31.

R. Takai, N. Endo, R. Hirohara et al., Experimental and numerical analysis of grain refinement effect on hot tearing susceptibility for Al-Mg alloys, Int. J. Adv. Manuf. Technol., 2019, 100, p 1867–1880. https://doi.org/10.1007/s00170-018-2791-2CrossRef

32.

J.W. Liu and S. Kou, Crack susceptibility of binary aluminum alloys during solidification, Acta Mater., 2016, 10, p 84–94. https://doi.org/10.1016/j.actamat.2016.03.030CrossRef

33.

X.J. Yu, J. Shen and W.J. Zhou, Effects of Rare Earth Yttrium on Degassing Efficiency and Corrosion Resistance of the A356 Alloy, Spec. Cast. Nonferr. Alloys., 2017, 37(12), p 1389–1392. https://doi.org/10.15980/j.tzzz.2017.12.031CrossRef

34.

D.H. Chen, Z. Chen, X.R. Zhu et al., Effect of Ce and Cu Content on the Structure and Properties of Al-Cu-Ce Cast Aluminum Alloy, Spec. Cast. Nonferr. Alloys., 2018, 38(12), p 7–11. https://doi.org/10.15980/j.tzzz.2018.12.002CrossRef

35.

X.B. Zhang, Z. Peng, L. Zeng et al., Effect of adding Ce on the hot-tearing susceptibility of the 5TiB₂/Al-5Cu composite, Mater. Charact., 2020, 168, 110552. https://doi.org/10.1016/j.matchar.2020.110552CrossRef

36.

D.D. Zhang, H. Zhang, X.H. Yu et al., Effect of Ce on microstructure and mechanical properties of AZ61A magnesium alloy, Heat Treat. Met., 2011, 36(12), p 49–54. https://doi.org/10.13251/j.issn.0254-6051.2011.12.014CrossRef

Titel: Effect of Ce on Hot Tearing Sensitivity of As-Cast Al-Cu-Mg-Y Alloy
verfasst von: Yuxiang Wang
Chunyu Yue
Ming Su
Xiaoguang Yuan
Bowen Zheng
Publikationsdatum: 19.02.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 8/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-06690-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2022

Effect of Groove Angle on Stress Field and Deformation of Q345/316 Dissimilar Metal Welded Joints

Nanoindentation Hardness and Corrosion Studies of Additively Manufactured 316L Stainless Steel

Productıon and Cleaning of Lattice Structures Used in the Space and Aerospace Industry with Metal Additive Manufacturing Method

Improving Productivity in the Laser Powder Bed Fusion of Inconel 718 by Increasing Layer Thickness: Effects on Mechanical Behavior

Fatigue Characterization and Modeling of Additively Manufactured Hastelloy-X Superalloy

Structure-Property Correlation in Weld Metals and Interface Regions of Titanium/Steel Dissimilar Joints

Premium Partner

Marktübersichten