Effect of CO gas on surface profile and magnetic properties of Fe–Si–B amorphous ribbons

The Fe–Si–B amorphous ribbons with various CO ventilation amount were prepared by planar-flow melt spinning method. The effect of CO gas on surface quality, magnetic properties and core loss of amorphous ribbons were investigated. With the increasing CO ventilation, the wheel side surface roughness, average air pocket size and air pocket quality decrease, the ribbon grows thicker, but air side surface roughness remains almost no changes. The three samples have reached to a fully amorphous structure. Meanwhile the diffraction angle corresponding the maximum intensity of each broad diffraction peak decrease slightly with increasing CO ventilation. There is no significant differences in the onset temperate of second exothermic peak (Tx2) and the crystallization peak temperature (Tp1 and Tp2) among the amorphous ribbons prepared with various CO ventilation, but the onset temperate of first exothermic peak (Tx1) increases slightly with the increasing CO ventilation. The room temperature hysteresis loops of amorphous ribbons show that surface quality have significant effect on magnetic properties. The coercivity (Hc), core loss (P_1.35/50), magnetic polarization (B80) and permeability (µ) among the ribbons are improved with better surface quality, though the saturation magnetic flux density almost keeps same. Core loss are separated by the scaling theory, and experiment dates show a good agreement with the predicted data. Thus the scaling theory is suitable for Fe–Si–B amorphous alloys. The surface quality has more significant effect on hysteresis losses than eddy current loss at low frequency.