nach oben

Journal of Materials Engineering and Performance

Erschienen in:

26.04.2023 | Technical Article

Effect of Crystallization on Mechanical Properties of Zr₈₅Cu₁₅ Metallic Glasses with Different Cooling Rates

verfasst von: Yong Yang, Jinhua Zhang, Minghe Li, Xiaoyang Ding, Zailin Yang

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 7/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Metallic glasses (MGs) have attracted extensive attention because of their unique disordered structures, excellent properties, and potential application prospects. The molecular dynamics simulation method is utilized in this paper to obtain the equal size Zr₈₅Cu₁₅ MGs and partially crystallized MGs with four different cooling rates. The effect of crystallization on the mechanical characteristics of MGs is investigated systematically on this basis. The yield strength of MGs decreases as the cooling rate increases, the plasticity improves, and the deformation mode gradually changes from localized to non-localized deformation. After isothermal annealing, the crystalline phase appears inside the MGs, the degree of softening of the MGs is reduced, and the yield strength is substantially increased; the shear band dominates plastic deformation. The MG with a cooling rate of 5 × 10¹² K/s exhibits better plasticity and low strain localization.

Vorheriger Artikel Analysis of Mechanical Behavior and Nanostructural Evolution of the Au/AuAl Alloy Interface

Nächster Artikel Molecular Dynamics Study of SiC Nanoparticle Effect on Crack Growth in Ti-6Al-4V Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

C.A. Schuh, T.C. Hufnagel, and U. Ramamurty, Overview No. 144—Mechanical Behavior of Amorphous Alloys, Acta Mater., 2007, 55(12), p 4067–4109. https://doi.org/10.1016/j.actamat.2007.01.052CrossRef

K. Tao, J.C. Qiao, Q.F. He, K.K. Song, and Y. Yang, Revealing the Structural Heterogeneity of Metallic Glass: Mechanical Spectroscopy and Nanoindentation Experiments, Int. J. Mech. Sci., 2021 https://doi.org/10.1016/j.ijmecsci.2021.106469CrossRef

H.Y. Jung, S.J. Choi, K.G. Prashanth, M. Stoica, S. Scudino, S. Yi, U. Kuhn, D.H. Kim, K.B. Kim, and J. Eckert, Fabrication of Fe-based Bulk Metallic Glass by Selective Laser Melting: A Parameter Study, Mater. Design, 2015, 86, p 703–708. https://doi.org/10.1016/j.matdes.2015.07.145CrossRef

L. Reichel, L. Schultz, D. Pohl, S. Oswald, S. Fahler, M. Werwinski, A. Edstrom, E.K. Delczeg-Czirjak, and J. Rusz, From Soft to Hard Magnetic Fe-Co-B by Spontaneous Strain: A Combined First Principles and Thin Film Study, J. Phys.-Condens. Matter, 2015 https://doi.org/10.1088/0953-8984/27/47/476002CrossRefPubMed

C. Zhang, R.Q. Guo, Y. Yang, and L. Liu, Influence of the Size of Spraying Powders on the Microstructure and Corrosion Resistance of Fe-Based Amorphous Coating, Electrochim. Acta, 2011, 56(18), p 6380–6388. https://doi.org/10.1016/j.electacta.2011.05.020CrossRef

S.T. Deng, H.F. Zhang, A.M. Wang, H. Li, B.Z. Ding, and Z.Q. Hu, Improving Glass Forming Ability of Zr_50.5Cu_36.5Ni₄Al₉ Alloy by Suppressing CuZr Phase Precipitation, J. Alloys Compounds, 2008, 460(1–2), p 182–185. https://doi.org/10.1016/j.jallcom.2007.05.062CrossRef

Q.K. Jiang, X.D. Wang, X.P. Nie, G.Q. Zhang, H. Ma, H.J. Fecht, J. Bednarcik, H. Franz, Y.G. Liu, Q.P. Cao, and J.Z. Jiang, Zr-(Cu, Ag)-Al Bulk Metallic Glasses, Acta Mater., 2008, 56(8), p 1785–1796. https://doi.org/10.1016/j.actamat.2007.12.030CrossRef

J. Shen, J. Zou, L. Ye, Z.P. Lu, D.W. Xing, M. Yan, and J.F. Sun, Glass-Forming Ability and Thermal Stability of a New Bulk Metallic Glass in the Quaternary Zr-Cu-Ni-Al System, J. Non-Cryst. Solids, 2005, 351(30–32), p 2519–2523. https://doi.org/10.1016/j.jnoncrysol.2005.07.009CrossRef

Y. Zhang, M. Zhou, X.Y. Zhao, and L.Q. Ma, Co Substituted Zr-Cu-Al-Ni Metallic Glasses with Enhanced Glass-Forming Ability and High Plasticity, J. Non-Crystall. Solids, 2017, 473, p 120–124. https://doi.org/10.1016/j.jnoncrysol.2017.08.001CrossRef

10.

W.H. Wang, C. Dong, and C.H. Shek, Bulk Metallic Glasses, Mater. Sci. Eng. R-Reports, 2004, 44(2–3), p 45–89. https://doi.org/10.1016/j.mser.2004.03.001CrossRef

11.

L. Yang, G.Q. Guo, L.Y. Chen, B. Laqua, and J.Z. Jiang, Tuning Local Structures in Metallic Glasses by Cooling Rate, Intermetallics, 2014, 44, p 94–100. https://doi.org/10.1016/j.intermet.2013.08.006CrossRef

12.

Y. Hu, H.H. Yan, Z.J. Yan, and X.G. Wang, Bending Deformation Behavior of Zr₆₅Cu_17.5Ni₁₀Al_7.5 Bulk Metallic Glass with Different Solidification Cooling Rate, Aip Adv., 2018 https://doi.org/10.1063/1.5040682CrossRef

13.

C.Y. Li, S.Z. Kou, Y.C. Zhao, G.Q. Liu, and Y.T. Ding, Effect of Cooling Rate on Plastic Deformation of Zr-Based Bulk Metallic Glasses, Prog. Nat. Sci.-Mater. Int., 2012, 22(1), p 21–25. https://doi.org/10.1016/j.pnsc.2011.12.004CrossRef

14.

Z.Y. Liu, Y. Yang, S. Guo, X.J. Liu, J. Lu, Y.H. Liu, and C.T. Liu, Cooling Rate Effect on Young’s Modulus and Hardness of a Zr-Based Metallic Glass, J. Alloys Compounds, 2011, 509(7), p 3269–3273. https://doi.org/10.1016/j.jallcom.2010.12.095CrossRef

15.

Y. Jiang, Study the Atomistic Structure of Monatomic Vanadium Under Different Cooling Rates by Molecular Dynamics Simulation, J. Mol. Liq., 2021 https://doi.org/10.1016/j.molliq.2020.114871CrossRefPubMedPubMedCentral

16.

F.L. Wang, D.W. Yin, J.W. Lv, S. Zhang, M.Z. Ma, X.Y. Zhang, and R.P. Liu, Effect on Microstructure and Plastic Deformation Behavior of a Zr-Based Amorphous Alloy by Cooling Rate Control, J. Mater. Sci. Technol., 2021, 82, p 1–9. https://doi.org/10.1016/j.jmst.2020.12.013CrossRef

17.

X.B. Mei, B.C. Liu, W. Jiang, Q. Xu, Q.D. Zhang, Y.B. Ma, and F.Q. Zu, Effect of Different Cooling Rates in high Rheological Rate Forming Process on Mechanical Properties of Zr(57)Cu(20)Al(10)Ni(8)Ag(5) Bulk Metallic Glass, Met. Mater. Int., 2020, 26(9), p 1415–1419. https://doi.org/10.1007/s12540-019-00387-zCrossRef

18.

A. Kotri, Y. Belkassmi, Y. Lachtioui, B. Boughazi, and M. Sahal, Atomistic Insights into the Effect of Cooling Rates on the Structural and Mechanical Properties of Vanadium Monatomic Metallic Glass, Chin. J. Phys., 2022, 79, p 503–513. https://doi.org/10.1016/j.cjph.2022.09.017CrossRef

19.

Z. Bian, Y. Liang, (分子动力学模拟冷却速率对非晶合金结构与变形行为的影响) Molecular dynamics simulation of effect of cooling rate on the microstructures and deformation behaviors in metallic glasses, Acta Phys. Sin. 2020, 69(11). (In Chinese) https://doi.org/10.7498/aps.69.20191781

20.

H.D. Yang, L.B. Zhang, J.S. Zhang, H.H. Tang, and S.H. Chen, Effect of Sample Size and Cooling Rate on the Plastic Deformation Behavior of Bulk Metallic Glasses: A Comparative Study, J. Non-Crystall. Solids, 2022 https://doi.org/10.1016/j.jnoncrysol.2022.121643CrossRef

21.

J.J. Chang, K.M. Cho, W.S. Chung, K.H. Kim, U.C. Chung, J.H. Park, and Y.R. Cho, Effects of Annealing on the Mechanical Properties of Zr-Based Bulk Metallic Glass for use in Die Applications, Mater. Sci. Eng. a-Struct. Mater. Prop. Microstruct. Process., 2005, 396(1–2), p 423–428. https://doi.org/10.1016/j.msea.2005.02.012CrossRef

22.

C.R. Jin, S.Y. Yang, X.Y. Deng, Y.W. Wang, and X.W. Cheng, Effect of Nano-Crystallization on Dynamic Compressive Property of Zr-Based Amorphous Alloy, Acta Metall. Sin., 2019, 55(12), p 1561–1568. https://doi.org/10.11900/0412.1961.2019.00207CrossRef

23.

Y. Yang, H.R. Li, Z.L. Yang, J. Liu, E.K. Kateye, and J.W. Zhao, Notch fatigue of Cu₅₀Zr₅₀ Metallic Glasses Under Cyclic Loading: Molecular Dynamics Simulations, Commun. Theoret. Phys., 2021 https://doi.org/10.1088/1572-9494/abf03cCrossRef

24.

M. Imran, F. Hussain, S. Altaf, A. Rehman, M.A. Javid, M. Ismail, M. Rashid, R.M.A. Khalil, A. Sattar, and S.A. Ahmad, Dynamic Characterization of Cu-Zr Binary Bulk Metallic Glasses: A Molecular Dynamics Study, Canad. J. Phys., 2017, 95(12), p 1189–1193. https://doi.org/10.1139/cjp-2016-0926CrossRef

25.

S.D. Feng, K.C. Chan, L. Zhao, S.P. Pan, L. Qi, L.M. Wang, and R.P. Liu, Rejuvenation by Weakening the Medium Range Order in Zr₄₆Cu₄₆Al₈ Metallic Glass with Pressure Preloading: A Molecular Dynamics Simulation Study, Mater. Design, 2018, 158, p 248–255. https://doi.org/10.1016/j.matdes.2018.08.040CrossRef

26.

Y.Q. Cheng, A.J. Cao, H.W. Sheng, and E. Ma, Local Order Influences Initiation of Plastic Flow in Metallic Glass: Effects of Alloy Composition and Sample Cooling History, Acta Mater., 2008, 56(18), p 5263–5275. https://doi.org/10.1016/j.actamat.2008.07.011CrossRef

27.

S.H. Chen, Q. Ge, J.S. Zhang, W.J. Chang, J.C. Zhang, H.H. Tang, and H.D. Yang, Low- Speed Machining of a Zr-based Bulk Metallic Glass, J. Manuf. Process., 2021, 72, p 565–581. https://doi.org/10.1016/j.jmapro.2021.10.055CrossRef

28.

Q.S. Zeng, H.W. Sheng, Y. Ding, L. Wang, W.G. Yang, J.Z. Jiang, W.L. Mao, and H.K. Mao, Long-Range Topological Order in Metallic Glass, Science, 2011, 332(6036), p 1404–1406. https://doi.org/10.1126/science.1200324CrossRefPubMed

29.

A. Stukowski, Visualization and Analysis of Atomistic Simulation Data with OVITO-the Open Visualization Tool, Modell. Simul. Mater. Sci. Eng., 2010 https://doi.org/10.1088/0965-0393/18/1/015012CrossRef

30.

K.W. Park, E. Fleury, H.K. Seok, and Y.C. Kim, Deformation Behaviors Under Tension and Compression: Atomic Simulation of Cu₆₅Zr₃₅ Metallic Glass, Intermetallics, 2011, 19(8), p 1168–1173. https://doi.org/10.1016/j.intermet.2011.03.024CrossRef

31.

F. Hussain, M. Imran, M. Rashid, H. Ullah, A. Shakoor, E. Ahmad, and S.A. Ahmad, Molecular Dynamics Simulation of Mechanical Characteristics of CuZr Bulk Metallic Glasses Using Uni-Axial Tensile Loading Technique, Phys. Scr., 2014 https://doi.org/10.1088/0031-8949/89/11/115701CrossRef

32.

Y.F. Shi, D. Louca, G.Y. Wang, and P.K. Liaw, Compression-Compression Fatigue Study on Model Metallic Glass Nanowires by Molecular Dynamics Simulations, J. Appl. Phys., 2011 https://doi.org/10.1063/1.3610443CrossRef

33.

L.S. Huo, J. Ma, H.B. Ke, H.Y. Bai, D.Q. Zhao, and W.H. Wang, The Deformation Units in Metallic Glasses Revealed by Stress-Induced Localized Glass Transition, J. Appl. Phys., 2012 https://doi.org/10.1063/1.4728207CrossRefPubMedPubMedCentral

34.

S.H. Chen, T. Li, W.J. Chang, H.D. Yang, J.C. Zhang, H.H. Tang, S.D. Feng, F.F. Wu, and Y.C. Wu, On the Formation of Shear Bands in a Metallic Glass Under Tailored Complex Stress Fields, J. Mater. Sci. Technol., 2020, 53, p 112–117. https://doi.org/10.1016/j.jmst.2020.02.082CrossRef

35.

Y. Yokoyama, Ductility Improvement of Zr-Cu-Ni-Al Glassy Alloy, J. Non-Crystall. Solids, 2003, 316(1), p 104–113. https://doi.org/10.1016/s0022-3093(02)01942-7CrossRef

36.

D. Zhao, H.W. Zhao, B. Zhu, and S.B. Wang, Investigation on Hardening Behavior of Metallic Glass Under Cyclic Indentation Loading via Molecular Dynamics Simulation, Appl. Surf. Sci., 2017, 416, p 14–23. https://doi.org/10.1016/j.apsusc.2017.04.125CrossRef

37.

D. Zhao, B. Zhu, S.B. Wang, Y.H. Niu, L.X. Xu, and H.W. Zhao, Effects of Pre-strain on the Nanoindentation Behaviors of Metallic Glass Studied by Molecular Dynamics Simulations, Comput. Mater. Sci., 2021 https://doi.org/10.1016/j.commatsci.2020.110073CrossRef

Titel: Effect of Crystallization on Mechanical Properties of Zr85Cu15 Metallic Glasses with Different Cooling Rates
verfasst von: Yong Yang
Jinhua Zhang
Minghe Li
Xiaoyang Ding
Zailin Yang
Publikationsdatum: 26.04.2023
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 7/2024
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-023-08213-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2024

The Combined Effect of Direct Current Polarization, Ultraviolet Radiation, and Saline Immersion on the Degradation of an Epoxy Coating

Microstructure–Mechanical Property Relationship and Austenite Stability in Transformation-Induced Plasticity Steels: Effects of Quenching and Partitioning Processing and Quenching and Tempering Treatments

Height Stability Control of CuCrZr Alloy Based on Forming Characteristics and Droplet Transfer Behaviors in Wire Arc Additive Manufacturing

Influence of Tool Size and Step Depth on the Formability Behavior of AA1050, AA6061-T6, and AA7075-T6 by Single-Point Incremental Forming Process

Temperature-Dependent Morphological Evaluation of In Situ Grown Hard ZrN Coating for Enhanced Mechanical, Wetting and Electrochemical Properties

Evaluation of Laser Shock Processing Quality of a Superalloy Using a Multi-Criteria Decision Making Methodology

Premium Partner

Marktübersichten