nach oben

Arabian Journal for Science and Engineering

Erschienen in:

15.09.2020 | Research Article-Civil Engineering

Effect of Particle Size of Quartz Sand Filler on Microstructure and Strength of Alkali-Activated Slag-Based Materials

verfasst von: N. N. Klimenko, N. Yu. Mikhailenko, L. M. Delitsin, V. N. Sigaev

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 5/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Interaction between quartz sand and water glass has been investigated and characterized by using the Si/Na molar ratio to determine the role of silica in the polycondensation rate and mechanical properties of the synthesized materials as a function of quartz sand particle size. Results of atomic emission spectroscopy, SEM and compressive strength tests show that interactions between sodium silicate solution and quartz sand depend on the degree of dispersibility that determines the degree of amorphization of quartz sand. When using ordinary quartz sand sodium silicate solution acts as a thin layer of glue covering the grains of sand and weakly binds them to each other, while using finely ground quartz sand in the mixture there is a dissolution–precipitation reaction that modifies the surface layers of the particles and more strongly consolidating the granular system. The increase in the molar ratio of Si/Na in sodium silicate solution containing finely ground quartz sand occurs due to the increase in the proportion of amorphous quartz (according to XRD) and corresponds to the described mechanism. Then, samples of alkali-activated slag-based materials with a coarse ordinary quartz sand and finely ground quartz sand were synthesized, compared in terms of strength and the latter characterized by SEM, porosimetry, XRD. The increase of dispersibility and amorphization of quartz sand is established to favors to form consolidated of low-temperature curing materials based on alkali-activated slag and quartz sand with the significantly increased compressive strength from 30–44 MPa for mixtures based on ordinary coarse quartz sand to 95–140 MPa for finely ground slag/sand blended mixture.

Vorheriger Artikel Acoustic Emission Monitoring of RC Beams Corroded to Different Levels Under Flexural Loading

Nächster Artikel Analysis of Highway Construction Project Time Overruns Using Survey Approach

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Shi, C.; Roy, D.; Krivenko, P.: Alkali-Activated Cements and Concretes. Taylor & Francis, Abingdon (2006)CrossRef

Pacheco-Torgal, F.; Castro-Gomes, J.; Jalali, S.: Alkali-activated binders: a review. Part 1. Historical background, terminology, reaction mechanisms and hydration products. Constr. Build. Mater. 22, 1305–1314 (2008). https://doi.org/10.1016/j.conbuildmat.2007.10.015CrossRef

Saeli, M.; Novais, R.M.; Seabra, M.P.; Labrincha, J.A.: Green geopolymeric concrete using grits for applications in construction. Mater. Lett. 233, 94–97 (2018). https://doi.org/10.1016/j.matlet.2018.08.102CrossRef

Vishwakarma, V.; Ramachandran, D.: Green concrete mix using solid waste and nanoparticles as alternatives—a review. Constr. Build. Mater. 162, 96–103 (2018). https://doi.org/10.1016/j.conbuildmat.2017.11.174CrossRef

Gavali, H.R.; Bras, A.; Faria, P.; Ralegaonkar, R.V.: Development of sustainable alkali-activated bricks using industrial wastes. Constr. Build. Mater. 215, 180–191 (2019). https://doi.org/10.1016/j.conbuildmat.2019.04.152CrossRef

Elahi, M.M.A.; Hossain, M.M.; Karim, M.R.; Zain, M.F.M.; Shearer, C.: A review on alkali-activated binders: materials composition and fresh properties of concrete. Constr. Build. Mater. 260, 119788 (2020). https://doi.org/10.1016/j.conbuildmat.2020.119788CrossRef

Wang, W.; Noguchi, T.: Alkali-silica reaction (ASR) in the alkali-activated cement (AAC) system: a state-of-the-art review. Constr. Build. Mater. 252, 119105 (2020). https://doi.org/10.1016/j.conbuildmat.2020.119105CrossRef

Neupane, K.; Chalmers, D.; Kidd, P.: High-strength geopolymer concrete—advantages and challenges. Adv. Mater. 7, 1–17 (2009). https://doi.org/10.11648/j.am.20180702.11CrossRef

Baščarevć, Z.: The resistance of alkali-activated cement-based binders to chemical attack. In: Handb. Alkali-Activated Cem. Mortars Concr., pp. 373–396 (2015). https://doi.org/10.1533/9781782422884.3.373

10.

Zhuang, X.Y.; Chen, L.; Komarneni, S.; Zhou, C.H.; Tong, D.S.; Yang, H.M.; Yu, W.H.; Wang, H.: Fly ash-based geopolymer: clean production, properties and applications. J. Clean. Prod. 125, 253–267 (2016). https://doi.org/10.1016/j.jclepro.2016.03.019CrossRef

11.

Zhang, J.; Shi, C.; Zhang, Z.; Ou, Z.: Durability of alkali-activated materials in aggressive environments: a review on recent studies. Constr. Build. Mater. 152, 598–613 (2017). https://doi.org/10.1016/j.conbuildmat.2017.07.027CrossRef

12.

Cretescu, I.; Harja, M.; Teodosiu, C.; Isopescu, D.N.; Chok, M.F.; Sluser, B.M.; Salleh, M.A.M.: Synthesis and characterisation of a binder cement replacement based on alkali activation of fly ash waste. Process Saf. Environ. Prot. 119, 23–35 (2018). https://doi.org/10.1016/j.psep.2018.07.011CrossRef

13.

Fang, G.; Ho, W.K.; Tu, W.; Zhang, M.: Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature. Constr. Build. Mater. 172, 476–487 (2018). https://doi.org/10.1016/j.conbuildmat.2018.04.008CrossRef

14.

Kriven, W.M.: 5.9 Geopolymer-based composites. In: Compr. Compos. Mater. II, pp. 269–280 (2018). https://doi.org/10.1016/B978-0-12-803581-8.09995-1

15.

Luukkonen, T.; Abdollahnejad, Z.; Yliniemi, J.; Kinnunen, P.; Illikainen, M.: One-part alkali-activated materials: a review. Cem. Concr. Res. 103, 21–34 (2018). https://doi.org/10.1016/j.cemconres.2017.10.001CrossRef

16.

Pilehvar, S.; Cao, V.D.; Szczotok, A.M.; Valentini, L.; Salvioni, D.; Magistri, M.; Pamies, R.; Kjøniksen, A.L.: Mechanical properties and microscale changes of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials. Cem. Concr. Res. 100, 341–349 (2017). https://doi.org/10.1016/j.cemconres.2017.07.012CrossRef

17.

Autef, A.; Joussein, E.; Gasgnier, G.; Rossignol, S.: Role of the silica source on the geopolymerization rate. J. Non Cryst. Solids 358, 2886–2893 (2012). https://doi.org/10.1016/j.jnoncrysol.2012.07.015CrossRef

18.

Kouassi, S.S.; Tognonvi, M.T.; Soro, J.; Rossignol, S.: Consolidation mechanism of materials obtained from sodium silicate solution and silica-based aggregates. J. Non Cryst. Solids 357, 3013–3021 (2011). https://doi.org/10.1016/j.jnoncrysol.2011.04.006CrossRef

19.

Lucas, S.; Tognonvi, M.T.; Gelet, J.L.; Soro, J.; Rossignol, S.: Interactions between silica sand and sodium silicate solution during consolidation process. J. Non Cryst. Solids 357, 1310–1318 (2011). https://doi.org/10.1016/j.jnoncrysol.2010.12.016CrossRef

20.

Okoye, F.N.; Durgaprasad, J.; Singh, N.B.: Effect of silica fume on the mechanical properties of fly ash based-geopolymer concrete. Ceram. Int. 42, 3000–3006 (2016). https://doi.org/10.1016/j.ceramint.2015.10.084CrossRef

21.

Bhagath Singh, G.V.P.; Subramaniam, K.V.L.: Effect of active components on strength development in alkali-activated low calcium fly ash cements. J. Sustain. Cem. Based Mater. 8, 1–19 (2019). https://doi.org/10.1080/21650373.2018.1520657CrossRef

22.

Toniolo, N.; Boccaccini, A.R.: Fly ash-based geopolymers containing added silicate waste. A review. Ceram. Int. 43, 14545–14551 (2017). https://doi.org/10.1016/j.ceramint.2017.07.221CrossRef

23.

Glukhovsky, V.; Pakhomov, V.: Slag-Alkaline Cements and Concretes. Budivel’nik, Kiev (1978)

24.

Song, S.; Sohn, D.; Jennings, H.M.; Mason, T.O.: Hydration of alkali-activated ground granulated blast furnace slag. J. Mater. Sci. 35, 249–257 (2000). https://doi.org/10.1023/A:1004742027117CrossRef

25.

Zhang, Y.J.; Zhao, Y.L.; Li, H.H.; Xu, D.L.: Structure characterization of hydration products generated by alkaline activation of granulated blast furnace slag. J. Mater. Sci. 43, 7141–7147 (2008). https://doi.org/10.1007/s10853-008-3028-9CrossRef

26.

Provis, J.L.: Milestones in the analysis of alkali-activated binders. J. Sustain. Cem. Mater. 4, 74–84 (2015). https://doi.org/10.1080/21650373.2014.958599CrossRef

27.

GOST 10180-2012. Betony. Metody opredeleniya prochnosti po kontrolnym obraztsam [State Standard 10180-2012. Concretes. Methods for strength determination using reference specimens]. Standartinform Publ., Moscow (2018). (in Russian)

28.

GOST 30629-2011. Materialy i izdeliya obliztovochnye iz gornykh porod. Metody ispytaniy [State Standard 30629-2011. Facing materials and products made of natural stone. Test methods]., Standartinform Publ., Moscow (2012). (in Russian)

29.

Mikhailenko, N.Y.; Klimenko, N.N.: Process parameter optimization for synthesis of high-silica liquid-glass composites for construction. Glass Ceram. (English Transl. Steklo i Keramika) 70, 174–179 (2013). https://doi.org/10.1007/s10717-013-9535-4CrossRef

30.

Zendri, E.; Biscontin, G.; Nardini, I.; Riato, S.: Characterization and reactivity of silicatic consolidants. Constr. Build. Mater. 21, 1098–1106 (2007). https://doi.org/10.1016/j.conbuildmat.2006.01.006CrossRef

31.

Brough, A.R.; Atkinson, A.: Sodium silicate-based, alkali-activated slag mortars—part I. Strength, hydration and microstructure. Cem. Concr. Res. 32, 865–879 (2002). https://doi.org/10.1016/S0008-8846(02)00717-2CrossRef

32.

Duxson, P.; Provis, J.L.; Lukey, G.C.; Mallicoat, S.W.; Kriven, W.M.; Van Deventer, J.S.J.: Understanding the relationship between geopolymer composition, microstructure and mechanical properties. Colloids Surf. A Physicochem. Eng. Asp. 269, 47–58 (2005). https://doi.org/10.1016/j.colsurfa.2005.06.060CrossRef

33.

Wang, K.; Lemougna, P.N.; Tang, Q.; Li, W.; He, Y.; Cui, X.: Low temperature depolymerization and polycondensation of a slag-based inorganic polymer. Ceram. Int. 43, 9067–9076 (2017). https://doi.org/10.1016/j.ceramint.2017.04.052CrossRef

34.

Qing-Hua, C.; Tagnit-Hamou, A.; Sarkar, S.L.: Strength and microstructural properties of water glass activated slag. MRS Proc. 245, 49–54 (2011). https://doi.org/10.1557/proc-245-49CrossRef

35.

Zhang, D.; Li, L.; Wang, D.; Wang, J.; Liu, Z.; Shao, N.: Microstructure and phase evolution of alkali-activated steel slag during early age. Constr. Build. Mater. 204, 158–165 (2019). https://doi.org/10.1016/j.conbuildmat.2019.01.213CrossRef

36.

Klimenko, N.N.; Kolokol’chikov, I.Y.; Mikhailenko, N.Y.; Orlova, L.A.; Sigaev, V.N.: New high-strength building materials based on metallurgy wastes. Glass Ceram. (English Transl. Steklo i Keramika) 75, 206–210 (2018). https://doi.org/10.1007/s10717-018-0056-zCrossRef

37.

GOST 57293-2016. Cement obshchestroitelniy. Tekhnicheskie usloviya. [State Standard 57293-2016. Common Cement. Specifications/EN 197-1:2011, Cement—Part 1: Composition, specification and conformity criteria for common cement, IDT]. Standartinform Publ., Moscow (2016). (in Russian)

38.

Tognonvi, M.T.; Soro, J.; Rossignol, S.: Physical-chemistry of silica/alkaline silicate interactions during consolidation. Part 1: effect of cation size. J. Non Cryst. Solids 358, 81–87 (2012). https://doi.org/10.1016/j.jnoncrysol.2011.08.027CrossRef

39.

Tognonvi, M.T.; Soro, J.; Gelet, J.L.; Rossignol, S.: Physico-chemistry of silica/Na silicate interactions during consolidation. Part 2: effect of pH. J. Non Cryst. Solids 358, 492–501 (2012). https://doi.org/10.1016/j.jnoncrysol.2011.11.005CrossRef

40.

Cihangir, F.; Ercikdi, B.; Kesimal, A.; Ocak, S.; Akyol, Y.: Effect of sodium-silicate activated slag at different silicate modulus on the strength and microstructural properties of full and coarse sulphidic tailings paste backfill. Constr. Build. Mater. 185, 555–566 (2018). https://doi.org/10.1016/j.conbuildmat.2018.07.105CrossRef

41.

Król, M.; Rożek, P.; Chlebda, D.; Mozgawa, W.: Influence of alkali metal cations/type of activator on the structure of alkali-activated fly ash—ATR-FTIR studies. Spectrochim. Acta Part A Mol. Biomol. Spectrosc. 198, 33–37 (2018). https://doi.org/10.1016/j.saa.2018.02.067CrossRef

42.

Mozgawa, W.; Deja, J.: Spectroscopic studies of alkaline activated slag geopolymers. J. Mol. Struct. 924–926, 434–441 (2009). https://doi.org/10.1016/j.molstruc.2008.12.026CrossRef

43.

Ng, C.; Alengaram, U.J.; Wong, L.S.; Mo, K.H.; Jumaat, M.Z.; Ramesh, S.: A review on microstructural study and compressive strength of geopolymer mortar, paste and concrete. Constr. Build. Mater. 186, 550–576 (2018). https://doi.org/10.1016/j.conbuildmat.2018.07.075CrossRef

Titel: Effect of Particle Size of Quartz Sand Filler on Microstructure and Strength of Alkali-Activated Slag-Based Materials
verfasst von: N. N. Klimenko
N. Yu. Mikhailenko
L. M. Delitsin
V. N. Sigaev
Publikationsdatum: 15.09.2020
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 5/2021
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-020-04935-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2021

Insights into the Multifaceted Applications of Architectural Concrete: A State-of-the-Art Review

High Pressure Conduit: A Good Alternative to the Air Compressors Used in the Flotation Process

Experimental and Theoretical Study of Failure Characteristics of Rock Containing Single 3D Internal Open-Type Flaws

Study on the Gradation of Crushed Sand by Using a Novel Digital Image Processing Methodology

Improving the Mechanical Strengths of Hybrid Waste Geopolymer Binders by Short Fiber Reinforcement

Lateral Bearing Behaviors of Slightly Inclined Single Pile with Different Pile Head Restraint Under Combined Loads

Premium Partner

Marktübersichten