nach oben

Metal Science and Heat Treatment

Erschienen in:

20.02.2024 | ADDITIVE TECHNOLOGIES, POWDER AND COMPOSITE MATERIALS

Effect of Pressure and Heating Temperature on the Structure and Mechanical Properties of Explosion-Welded Aluminum-Niobium Multilayer Composite

verfasst von: Yu. N. Malyutina, D. V. Lazurenko, E. A. Lozhkina

Erschienen in: Metal Science and Heat Treatment | Ausgabe 9-10/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Multilayer composites formed by explosion welding from alternated plates of niobium and aluminum are studied. The samples are subjected to annealing at 700, 800 and 900°C under a load and without load. The structure, the ultimate tensile strength, the impact toughness and the Vickers microhardness of the composites are determined. It is shown that mixed zones represented by nonequilibrium phases, intermetallic particles of NbAl₃ and Nb₂ Al, and undissolved niobium volumes are formed near “local melting/rapid solidification” interfaces. Increase of the annealing temperature from 700 to 900°C causes growth of the intermetallic inclusions, appearance of cracks in the reaction layer, and considerable worsening of the mechanical properties. The highest ultimate strength (700 MPa) and impact toughness (86 J/cm² ) are obtained in the samples annealed under pressure at 900 and 800°C, respectively. Annealing at 700°C at a pressure of 30 MPa is shown to be an optimum treatment producing a favorable effect on the strength characteristics and providing a defect-free structure.

Vorheriger Artikel A Study of Gas-Saturated Layer After Oxidation of Alloy Ti6242S at 500 – 800°C

Nächster Artikel Effect of Gas Atmosphere in Aluminobarothermal Synthesis on the Structure of Metal Matrix Composites Based on Fe – Cr – Mn – Mo Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

H. E. Dève and M. J. Maloney, “On the toughening of intermetallics with ductile fibers: Role of interfaces,” Acta Metall. Mater., 39, 2275 – 2284 (1991). DOI: https://doi.org/10.1016/0956-7151(91)90010-XCrossRef

C. T. Liu, E. W. Cahn, and G. Sauthoff, Ordered Intermetallics. Physical Metallurgy and Mechanical Behavior, Springer (1992), 701 p.

J. H. Westbrook and R. L. Fleischer, Structural Applications of Intermetallic Compounds, Wiley (2000), 346 p.

G. Sauthoff, Intermetallics, Wiley (2007), 165 p.

V. A. Grinberg and M. A. Schastlivtsev, Ni₃Al and TiAl Intermetallics: Microstructure and Deformation Behavior [in Russian], URO RAN, Ekaterinburg (2002), 39 p.

N. A. Nochovnaya, O. A. Bazyleva, D. E. Kablov, and P. V. Panin, Intermetallic AlloysBased on Titanium and Nickel [in Russian], VIAM, Moscow (2018), 303 p.

D. V. Lazurenko, I. A. Bataev, V. I. Mali, et al., “Explosively welded multilayer Ti – Al composites: Structure and transformation during heat treatment,” Mater. Des., 102, 122 – 130 (2016). DOI: https://doi.org/10.1016/j.matdes.2016.04.037CrossRef

T. S. Ogneva, I. A. Bataev, V. I. Mali, et al., “Effect of sintering pressure and temperature on structure and properties of NiAl metal-intermetallic composites produced by SPS,” Mater. Charact., 180, 111415 (2021). DOI: https://doi.org/10.1016/j.matchar.2021.111415CrossRef

I. A. Bataev, T. S. Ogneva, A. A. Bataev, et al., “Explosively welded multilayer Ni – Al composites,” Mater. Des., 88, 1082 – 1087 (2015). DOI: https://doi.org/10.1016/j.matdes.2015.09.103CrossRef

10.

H. Wang, R. Kou, and K. S. Vecchio, “Design, fabrication and optimization of FeAl – FeAl₂ eutectoid metallic-intermetallic laminate (MIL) composites,” Materialia, 13, 100859 (2020). DOI: https://doi.org/10.1016/j.mtla.2020.100859CrossRef

11.

A. Loureiro, R. Mendes, J. B. Ribeiro, et al., “Effect of explosive mixture on quality of explosive welds of copper to aluminum,” Mater. Des., 95, 256 – 267 (2016). DOI: https://doi.org/10.1016/j.matdes.2016.01.116CrossRef

12.

S. Dymek, M. Dollar, and K. Leonard, “Synthesis and characterization of mechanically alloyed Nb₃ Al-base alloys,” Mater. Sci. Eng. A, 239 – 240(1 – 2), 507 – 514 (1997). DOI: https://doi.org/10.1016/S0921-5093(97)00624-2CrossRef

13.

V. Gauthier, C. Josse, J. P. Larpin, and M. Vilasi, “High-temperature oxidation behavior of the intermetallic compound NbAl₃: influence of two processing techniques on the oxidation mechanism,” Oxid. Met., 54(1), 27 – 45 (2000). DOI: https://doi.org/10.1023/A:1004694327812CrossRef

14.

R. Gnanamoorthy and S. Hanada, “Microstructure and strength of binary and tantalum alloyed two-phase Nbss/Nb₃Al base alloys,” Mater. Sci. Eng. A, 207(1), 129 – 134 (1996). DOI: https://doi.org/10.1016/0921-5093(95)10036-9CrossRef

15.

G. R. Khalikova, G. F. Korznikova, K. S. Nazarov, et al., “On the possibility of application of high-pressure torsional severe plastic deformation for making Al – Nb metal matrix composite materials,” Pis’ma Mater., 10(4), 475 – 480 (2020). DOI: https://doi.org/10.22226/2410-3535-2020-4-475-480CrossRef

16.

N. P. Lyakishev, Phase Diagrams of Binary Metallic Systems, Vol. 2 [in Russian], Mashinostroenie, Moscow (1997), 1024 p.

17.

V. P. Korzhov, M. I. Karpov, and D. V. Prokhorov, “Multilayer structure and high-temperature strength of refractory materials based on compounds of niobium with aluminum and silicon fabricated from Nb – Al and Nb – Si composites,” Fiz. Tekh. Vys. Davl., 23(1), 99 – 107 (2013).

18.

N. Zhang, W. Wang, X. Cao, and J. Wu, “The effect of annealing on the interface microstructure and mechanical characteristics of AZ31B/AA6061 composite plates fabricated by explosive welding,” Mater. Des., 65, 1100 – 1109 (2015). DOI: https://doi.org/10.1016/j.matdes.2014.08.025CrossRef

19.

C. Zhu, L. Sun, W. Cao, et al., “The effect of temperature on microstructure and mechanical properties of Al/Mg lap joints manufactured by magnetic pulse welding,” J. Mater. Res. Technol., 8(3), 3270 – 3280 (2019). DOI: https://doi.org/10.1016/j.jmrt.2019.05.017CrossRef

20.

D. M. Fronczek, R. Chulist, Z. Szulc, and J. Wojewoda-Budka, “Growth kinetics of TiAl₃ phase in annealed Al/Ti/Al explosively welded clads,” Mater. Lett., 198, 160 – 163 (2016). DOI: https://doi.org/10.1016/j.matlet.2017.04.025CrossRef

21.

M. K. G. Shiran, G. Khalaj, H. M. Pouraliakbar, et al., “Effect of heat treatment on the metallic compounds and mechanical properties of the stainless steel 321-aluminum 1230 explosive-welding interface,” Int. J. Miner. Metall. Mater., 24, 1267 – 1277 (2017). DOI: https://doi.org/10.1007/s12613-017-1519-xCrossRef

22.

I. Tricarico, R. Spina, D. Sorgente, and M. Brandizzi, “Effects of heat treatments on mechanical properties of Fe/Al explosion welded structural transition joints,” Mater. Des., 30(7), 2693 – 2700 (2009). DOI: https://doi.org/10.1016/j.matdes.2008.10.010CrossRef

23.

M. K. G. Shiran, G. Khalaj, H. Pouraliakbar, et al., “Multilayer Cu/Al/Cu explosive welded joints: characterizing heat treatment effect on the interface microstructure and mechanical properties,” J. Manuf. Proc., 35, 657 – 663 (2018). DOI: https://doi.org/10.1016/j.jmapro.2018.09.014CrossRef

24.

M. Ahedi, A. Asadi, S. Sovizi, et al., “Influence of pulsed direct current on the growth rate of intermetallic phases in the Ni – Al system during reactive spark plasma sintering,” Scr. Mater., 216, 114759 (2022). DOI: https://doi.org/10.1016/j.scriptamat.2022.114759CrossRef

25.

D. V. Lazurenko, I. A. Bataev, V. I. Mali, et al., “Synthesis of metal-intermetallic laminate (MIL) composites with modified Al₃Ti structure and in situ synchrotron x-ray diffraction analysis of sintering process,” Mater. Des., 151, 8 – 16 (2018). DOI: https://doi.org/10.1016/j.matdes.2018.04.038CrossRef

26.

Z. Munir, U. Tamburini, and M. Ohyanagi, “The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method,” J. Mater. Sci., 41(3), 763 – 777 (2006). DOI: https://doi.org/10.1007/s10853-006-6555-2ADSCrossRef

27.

D. Hulbert, D. Jiang, D. Dudina, and A. Mukherjee, “The synthesis and consolidation of hard materials by spark plasma sintering,” Int. J. Refr. Met. Hard Mater., 27(2), 367 – 375 (2009). DOI: https://doi.org/10.1016/j.ijrmhm.2008.09.011CrossRef

28.

Yu. N. Malyutina, A. G. Anisimov, A. I. Popelyukh, et al., “Microstructure and properties of multilayer niobium-aluminum composites fabricated by explosive welding,” Metals, 12(11), 1950, 1 – 14 (2022). DOI: https://doi.org/10.3390/met12111950

29.

J. F. Xu, H. H. Ma, Z. W. Shen, and Y. H. Li, “Effects of interlayer on the interfacial microstructures and thermomechanical kinetics of explosive welded 2Al14 aluminum alloy-niobium composite,” Mater. Today Comm., 33, 104792 (2022). DOI: https://doi.org/10.1016/j.mtcomm.2022.104792CrossRef

30.

G. H. S. F. I. Carvalho, I. Galvão, R. Mendes, et al., “Explosive welding of aluminium to stainless steel using carbon steel and niobium interlayers,” J. Mater. Proc. Technol., 283, 116707 (2020). DOI: https://doi.org/10.1016/j.jmatprotec.2020.116707CrossRef

31.

T. Ö. Ogurtani, “Kinetics of diffusion in the Nb – Al system,” Metall. Trans., 3, 421 – 425 (1972).CrossRef

32.

I. A. Bataev, D. V. Lazurenko, S. Tanaka, et al., “High cooling rates and metastable phases at the interfaces of explosively welded materials,” Acta Mater., 135, 277 – 289 (2017). DOI: https://doi.org/10.1016/j.actamat.2017.06.038ADSCrossRef

33.

H. Paul, P. Petrzak, R. Chulist, et al., “Effect of impact loading and heat treatment on microstructure and properties of multi-layered AZ31/AA1050 plates fabricated by singe-shot explosive welding,” Mater. Des., 214, 110411 (2022). DOI: https://doi.org/10.1016/j.matdes.2022.110411CrossRef

34.

Q. Chu, M. Zhang, J. Li, and C. Yan, “Experimental and numerical investigation of microstructure and mechanical behavior of titanium/steel interfaces prepared by explosive welding,” Mater. Sci. Eng. A, 689, 323 – 331 (2017). DOI: https://doi.org/10.1016/j.msea.2017.02.075CrossRef

35.

D.-S. Chung, M. Enoki, and T. Kishi, “Microstructural analysis and mechanical properties of the in situ Nb/Nb-aluminide layered materials,” Sci. Technol. Adv. Mater., 3(2), 129 – 135 (2002). DOI: https://doi.org/10.1016/S1468-6996(02)00007-4CrossRef

36.

T. Murakami, A. Kitahara, Y. Koga, et al., “Microstructure of Nb – Al powders consolidated by spark plasma sintering process,” Mater. Sci. Eng. A, 239 – 240(1 – 2), 672 – 679 (1997). DOI: https://doi.org/10.1016/S0921-5093(97)00651-5CrossRef

Titel: Effect of Pressure and Heating Temperature on the Structure and Mechanical Properties of Explosion-Welded Aluminum-Niobium Multilayer Composite
verfasst von: Yu. N. Malyutina
D. V. Lazurenko
E. A. Lozhkina
Publikationsdatum: 20.02.2024
Verlag: Springer US
Erschienen in: Metal Science and Heat Treatment / Ausgabe 9-10/2024
Print ISSN: 0026-0673
Elektronische ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-024-00971-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9-10/2024

Effect of Molybdenum Electron-Beam Cladding on the Heat and Wear Resistances of Surface Layers of Chromium-Nickel Austenitic Steel 12Kh18N9T

Review of Synthesis Methods, Microstructure and Properties of WC – Co-Based Hard Alloys

Correction to: Wear Resistance of Aluminum Alloy A356 After Thorough Anodic Oxidation

Effect of Natural Aging on the Structure and Properties of Steel 30KhGSA Hardened by Quenching and Partitioning

High-Resolution Characterization of Subunits in Nanostructured Bainite in High-Carbon Silicon Steel

Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709

Premium Partner

Marktübersichten