nach oben

Innovative Infrastructure Solutions

Erschienen in:

01.11.2023 | State-of-the-Art Paper

Effect of sulfur on the asphalt cement and asphalt concrete mixture: state of the art

verfasst von: Taisir Khedaywi, Madhar Haddad, Randa Mujalli, Shareef Shareef

Erschienen in: Innovative Infrastructure Solutions | Ausgabe 11/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This paper provides an investigation of the impact of adding sulfur to asphalt mixtures. After reviewing many research articles, it is determined that adding sulfur to asphalt mixtures increases their Marshall stability, stiffness, ductility of binder at low temperatures, and specific gravity. The flow and permanent deformation have decreased, on the other hand. For conventional sulfur–asphalt-binder testing, increasing sulfur content from 20 to 40% results in an increase in softening point and a decrease in penetration. Water infiltration resistance of modified sulfur pellet-based asphalt mixtures is comparable to that of conventional asphalt mixtures. However, sulfur has a negative impact on the environment, as well as health and safety implications. Because the oxidation of sulfur dioxide produces a hazardous gas, the use of sulfur in asphalt remains highly limited.

Vorheriger Artikel Liquefaction analysis of sand-tire mixture with a critical state two-surface plasticity model

Nächster Artikel The impact of using natural waste biopolymer cement on the properties of traditional/fibrous concrete

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Lee D-Y (1975) Modification of asphalt and asphalt paving mixtures by sulfur additives. Ind Eng Chem Prod Res Dev 14(3):171–177. https://doi.org/10.1021/i360055a009CrossRef

Shrive NG, Loov RE, Gillott JE, Jordaan IJ (1977) Basic properties of some Sulphur-bound composite materials. Mater Sci Eng 30:71–79CrossRef

Shrive NG, Gillott JE, Jordaan IJ, Loov RE (1977) A study of durability in temperature cycles and water resistance of Sulphur concretes and mortars. J Test Eval 5(6):484–494CrossRef

Shrive NG, Ward MA (1977) Some low temperature aging and durability aspects of sulphur/asphalt concretes. In: Marke C (ed)Low temperature properties of bituminous materials. ASTM, STP 628

Gifford PM, Gillott JE (1979) The use of Sulphur in roadway frost applications. Can Geotechnical J 16(1):78–89. https://doi.org/10.1139/t79-008CrossRef

Gillott JE, Jordaan IJ, Loov RE, Shrive NG (1980) Durability studies of sulphur concrete, durability of building materials and components. Litvan/Serada, ASTM, STP 691:549–559

Shrive NG, Gillott JE, Jordaan IJ, Loov RE (1982) The potential and properties of Sulphur concretes. In: ACS symposium series 183, sulphur: new sources and uses, American Chemical Society, pp 37–154

Gillott JE, Jordaan IJ, Loov RE, Shrive NG (1983) Effects of different aggregates on the durability of Sulphur concretes”. Durabil Build Mater Int J 1:255–273

Loov RE, Gillott JE, Jordaan IJ, Shrive NG (1983) Minimum cost design of Sulphur concrete pavement. Can J Civ Eng 10(4):649–653CrossRef

10.

Gillott JE, Jordaan IJ, Loov RE, Shrive NG, WARD, M. A. (1987) Characteristics of some sulfur-bonded civil Engineering materials. Adv Chem 78:165. https://doi.org/10.1021/ba-1978-0165.ch006CrossRef

11.

Junaid M, Shah MZA, Yaseen G, Awan HH, Khan D, Jawad M (2022) Investigating the effect of gradation, temperature and loading duration on the resilient modulus of asphalt concrete. Civil Eng J 8(2):278–289. https://doi.org/10.28991/CEJ-2022-08-02-07CrossRef

12.

Colange J, Strickland D, McCabe G, Gilbert K, May R, Banbury S (2010) Asphalt mixtures modified with Sulphur pellets, impact on pavement thickness. Road Mater Pavement Des 11(sup1):459–485. https://doi.org/10.1080/14680629.2010.9690342CrossRef

13.

Al-Mehthel M, Wahhab HI Al-Idi SH, Baig MG (2010) Sulfur extended asphalt as a major outlet for sulfur that outperformed other asphalt mixes in the Gulf. In: Sulfur world symposium, Doha, Qatar

14.

Parvez MA, Al-Mehthel M, Al-Abdul Wahhab H, Hussein I (2014) Utilization of sulfur and crumb rubber in asphalt modification. J Appl Polym Sci 131:40046. https://doi.org/10.1002/app.40046CrossRef

15.

Nistratov AV, Klimenko NN, Pustynnikov IV, Vu LK (2022) Thermal regeneration and reuse of carbon and glass fibers from waste composites. Civil Eng J 6(5):967–984. https://doi.org/10.28991/ESJ-2022-06-05-04CrossRef

16.

Shi J, Liu B, Tan J, Dia J, Chen J, Ji R (2020) Experimental studies and microstructure analysis for rapid-hardening cement emulsified asphalt mortar. J Constr Eng Manag 146(12):04020130. https://doi.org/10.1061/(ASCE)CO.1943-7862.00019CrossRef

17.

Nawir D, Mansur ZA (2022) Effects of HDPE utilization and addition of Wetfix-Be to asphalt pavement in tropical climates. Civil Eng J 8(8):1665–1678. https://doi.org/10.28991/CEJ-2022-08-08-010CrossRef

18.

Hossain Z, Braham AF, Baumgardner G (2017) Performance of asphalts modified with polyphosphoric acid, TRC 1501 Final Report, National Academy of Sciences, Washington, DC, USA. https://www.ardot.gov/wp-content/uploads/2020/11/TRC1501_Performance_of_Asphalts_Modified_with_Polyphosphoric_Acid.pdf

19.

Arabani M, Abadi KG, Hamedi GH (2023) The effect of Wetfix and Nanohydrated Lime additives on bitumen aging and the cohesion and adhesion failure mechanisms of hot asphalt mixtures. Adv Civil Eng. Article ID 4756773. https://doi.org/10.1155/2023/4756773

20.

Remišová E, Holý M (2017) Changes of properties of bitumen binders by additives application. IOP Conf Ser Mater Sci Eng 245(3):032003. https://doi.org/10.1088/1757-899X/245/3/032003CrossRef

21.

Nicholls JC (2009) Review of shell thiopave sulfur—extended asphalt modifier, TRL Report TRL672. National Academy of Sciences, Washington, DC, USA

22.

Timm D, Tran N, Taylor A, Robbins M, Powell B (2009) Evaluation of mixture performance and structural capacity of pavements using shell thiopave, Report No. NCAT 09–05. National Center for Asphalt Technology, Auburn University. https://www.eng.auburn.edu/research/centers/ncat/files/technical-reports/rep09-05.pdf

23.

Gladkikh VA, Korolev EV, Smirnov VA (2016) Eco–friendly high-performance pavement materials. J Multidiscip Sci Technol, IIOABJ 7(1):453–458. https://www.iioab.org/articles/IIOABJ_7.S1_453-458-1.pdf

24.

Mahoney JP, Lary JA, Balgunaim F, Lee TC (1982) Sulfur extended asphalt laboratory investigation—mixture characterization, Report No WA-RD 53.2. National Academy of Sciences, Washington, DC, USA. https://www.wsdot.wa.gov/research/reports/fullreports/053.2.pdf

25.

Trang NT, Hung TN, Khang PH, Cay BX, Kien BN (2021) Research on the effects of sulfur on the characteristics of sulfur bituminous binder (SSB) and hot mix asphalt – sulfur (HMAS). Transp Commun Sci J 72(1):33–45CrossRef

26.

Qian C, Fan W, Ren F, Lv X, Xing B (2019) Influence of polyphosphoric acid (PPA) on properties of crumb rubber (CR) modified asphalt. Constr Build Mater 227:117094. https://doi.org/10.1016/j.conbuildmat.2019.117094CrossRef

27.

Hossain Z, Alam MS, Baumgardner G (2020) Evaluation of rheological performance and moisture susceptibility of polyphosphoric acid modified asphalt binders. Road Mater Pavement Des 21(1):237–252. https://doi.org/10.1080/14680629.2018.1483261CrossRef

28.

Fernández (2022) (Statista), https://www.worldatlas.com/articles/top-12-sulphur-exporting-countries.html. Accessed 23 May 2022

29.

Sousa G (2017) (World Atlas), https://www.worldatlas.com/articles/top-12-sulphur-exporting-countries.html. Accessed 23 May 2022

30.

Gawel I (2000) Sulphur-modified Asphalts. Dev Pet Sci 40:515–535

31.

Schmidt M (1978) Sulfur, the scientific basis for practical applications of elemental. In: Bourne D (ed) New uses of sulfur—II. Advances in Chemistry; American Chemical Society, Washington, DC, pp 1–12

32.

Petrossi U, Bocca P, Pacor P (1972) Reactions and technological properties of sulfur-treated asphalt. Ind Eng Chem Prod Res Dev 11(2):214–219

33.

Kennepohl G, Logan A, Bean D (1975) Conventional paving mixes with sulfur-asphalt binders. In: Asphalt paving technology. Association of Asphalt Paving Technologists Technical Sessions

34.

McBee W, Sullivan T (1978) Sulfur utilization in asphalt paving materials. In: Bourne D, McBee WC, Sullivan TA (ed) American Chemical Society, pp 135–160

35.

Love G (1975) Sulfur: potential pavement binder of the future. J Traffic Transp Eng of ASCE 105(5):525–533CrossRef

36.

Courval G, Akili W (1982) Sulfur asphalt binder properties by the sliding plate rheometer. The National Academies of Sciences, Engineering, and Medicine, pp 222–239

37.

Balghunaim FAR (1984) Evaluation of maturing and moisture susceptibility of sulfur-asphalt concrete. Ph.D. dissertation, University of Michigan, USA

38.

Fatani MNY (1980) Dune sand-aggregate mixes and dune sand-sulfur mixes for asphaltic concrete pavements. Ph.D. dissertation, The University of Arizona, Tucson, USA

39.

Elkholy S, Abd El-Rahman AMM, El-Shafie M, Abo-Shanab ZL (2018) Physical and rheological properties of modified sulfur asphalt binder. Int J Pavement Res Technol 11:838–845

40.

Green JB, Yu SK-T, Pearson CD, Reynolds JW (1993) Analysis of sulfur compound types in asphalt. Energy Fuels 7:119–126CrossRef

41.

Chilingarian GV, Yen TF (1994) Asphaltenes and asphalts, 1st edn. eBook ISBN: 9780080868981.

42.

Souaya E, Elkholy SA, Abd El-Rahman AMM, El-Shafie M, Ibrahim IM, Abo-Shanab ZL (2015) Partial substitution of asphalt pavement with modified sulfur. Egypt J Pet 24(4):483–491CrossRef

43.

Bencowitz I, Boe ES (1938) Effect of sulphur upon some of the properties of asphalts. In Proc ASTM 38:539

44.

Nicholls J (2012). Sulphur extended asphalt modifier. In the 5th Eurasphalt & Eurobitume Congress, Issue Number: P5EE-208, Istanbul, Turkey

45.

Al-Ansari MM, Modaressi K, Taylor KE, Bewtra JK, Biswaset N (2010) Soybean peroxidase-catalyzed oxidative polymerization of phenols in coal-tar wastewater: comparison of additives. Environ Eng Sci 27(11):967–975. https://doi.org/10.1089/ees.2010.0143CrossRef

46.

Mohamed AMO, El-Dieb A, El Sawy KM, El Gamalet MM (2015) Durability of modified sulfur concrete in sewerage environment. Environ Geotech 2(2):95–103. https://doi.org/10.1680/envgeo.13.00026CrossRef

47.

Bukowsi J, Youtcheff J, Harman T (2012) An alternative asphalt binder, sulfur-extended asphalt (SEA) (TechBrief). US Department of Transportation. Federal Highway Administration. Office of Pavement Technology, FHWA-HIF-12–037

48.

Zoorob SE, Sangiorgi C, Eskandersefatet S (2017) A review of sulfur extended asphalt modifiers: feasibility and limitations. Transport infrastructure and systems (1st edn) CRC Press, pp 135–142

49.

Yu H, Zhang L, Sun L, Liu L, Tao J (2011) Analysis of the role that sulphur plays in the asphalt mixture in pavement. In: Third international conference on transportation engineering (ICTE). Chengdu, China. https://doi.org/10.1061/41184(419)240

50.

Pronk F (1978) Sulphur-bituminous composition stabilized with organosiloxane polymer. Canada, Patent No. CA 1045265

51.

Hameed AT, Al-Hadidy ARI (2011) The effect of sulfur waste and ABS on asphalt cement properties. Al-Rafidain Eng J (AREJ) 19(3):1–10CrossRef

52.

Singh M, Jain J, Singh SK, Kahlon SS (2022) Assessment of asphalt binder and mixes modified with Zycotherm and Sulphur. Mater Today: Proc 49(5):2217–2224

53.

Garrigues C, Vincent P (1975) Sulfur/asphalt binders for road construction. In: West J (ed) New uses of sulfur, advances in chemistry series. American Chemical Society, s.l., pp 130–153CrossRef

54.

Martínez-Estrada A, Enrique Chávez-Castellanos A, Herrera-Alonso M, Herrera-Nájera R (2010) Comparative study of the effect of sulfur on the morphology and rheological properties of SB-and SBS-modified asphalt. J Appl Polym Sci 115(6):3409–3422. https://doi.org/10.1002/app.31407CrossRef

55.

Zoorob SE, Al-Bahar SK (2017) Sulfur-asphalt site construction trial in Kuwait. Int J Struct Civil Eng Res 6(3):190–198CrossRef

56.

Arora MG, Abdul-Rahman KM (1985) Sulphur in recycling old asphalt pavements. In Proceedings of the 2nd Arab regional conference on sulphur and its usage, III, pp 37–53

57.

Mohammad LN, Cooper SB, Elseifi M (2016) Mechanistic evaluation of asphalt mixtures containing Thiopave additives, final report 500. Louisiana Transportation Research Center, pp. 1–23, Louisiana, USA

58.

Faramarzi M, Golestani B, Lee KW (2017) Improving moisture sensitivity and mechanical properties of sulfur extended asphalt mixture by nano-antistripping agent. Constr Build Mater 133:534–542. https://doi.org/10.1016/j.conbuildmat.2016.12.038CrossRef

59.

Beatty TL, Dunn K, Harrigan ET, Stuart K, Weber H (1987) Field evaluation of sulfur-extended asphalt pavements. Transp Res Rec 1115:161–170

60.

Kolmakov G, Zanozina VF, Karataev EN, Ivanov PS (2007) Effect of sulfur-containing acids on the penetration and softening point of asphalts obtained from acid sludge. Pet Chem 47(2):123–126. https://doi.org/10.1134/S0965544107020107CrossRef

61.

Nguyen VH, Le VP (2019) Performance evaluation of sulfur as alternative binder additive for asphalt mixtures. Int J Pavement Res Technol 12:380–387CrossRef

62.

Petersen JC (2000) Chemical composition of asphalt as related to asphalt durability. In: Yen TF, Chilingarian GV (eds) Asphaltenes and asphalts, 2, Chapter-14. https://doi.org/10.1016/S0376-7361(09)70285-7

63.

Gray RM (2015) Upgrading oilsands bitumen and heavy oil. The University of Alberta Press

64.

Masson JF, Leblond V, Margeson J (2006) Bitumen morphologies by phase detection atomic force microscopy. J Microsc 221:17CrossRef

65.

Branthaver JF, Petersen JC, Robertson RE, Duvall JJ, Kim SS, Harnsberger PM, Mill T, Ensley EK Barbour FA, Schabron JF (1993) Binder characterization and evaluation, vol 2. , Technical Report SHRP-A-368

66.

Nahar S (2016) Phase separation characteristics of bitumen and their relation to damage-healing, PhD Thesis. https://doi.org/10.4233/uuid:670c70ff-f9f0-4cdb-aa4d-b661e7117354

67.

Sulphur (2020)—cutting sulphur oxide emissions, media centre- in focus, International Maritime Organization

68.

Handle F, Füssl J, Neudl S, Grossegger D, Eberhardsteiner L, Hofko B, Hospodka M, Blab R, Grothe H (2014) The bitumen microstructure: a fluorescent approach. Mater Struct 1

69.

Groenzin and H., Mullins, O. C. (2000) Molecular size and structure of asphaltenes from various sources. Energy Fuels 14:677CrossRef

70.

Loeber L, Muller G, Morel J, Sutton O (1998) Bitumen in colloid science: a chemical, structural and rheological approach. Fuel 77:1443CrossRef

71.

Lu A, Langton M, Olofsson P, Redelius P (2005) Wax morphology in bitumen. J Mater Sci 40:1893CrossRef

Titel: Effect of sulfur on the asphalt cement and asphalt concrete mixture: state of the art
verfasst von: Taisir Khedaywi
Madhar Haddad
Randa Mujalli
Shareef Shareef
Publikationsdatum: 01.11.2023
Verlag: Springer International Publishing
Erschienen in: Innovative Infrastructure Solutions / Ausgabe 11/2023
Print ISSN: 2364-4176
Elektronische ISSN: 2364-4184
DOI: https://doi.org/10.1007/s41062-023-01264-w

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 11/2023

Examining TOD node typology using k-means, hierarchical, and latent class cluster analysis for a developing country

Unveiling optimal performance of SBS-modified asphalt mixture: crucial impact of elevated storage temperature and duration of binders

A detailed laboratory investigation on evolving the mix design of roller compacted concrete containing RAP aggregates and SCMs

Optimizing characteristics of high-performance concrete incorporating hybrid polypropylene fibers

Settlement and load sharing behavior of piled raft foundation: a review

Optimizing the number of crews working in parallel and their work sequence to minimize project duration and cost for repetitive construction projects