nach oben

Electrical Engineering

Erschienen in:

12.07.2021 | Original Paper

Effect of the magnet shape on the performance of coreless axial flux permanent magnet synchronous generator

verfasst von: Shahbaz Amin, Sadjad Madanzadeh, Sahib Khan, Syed Sabir Hussain Bukhari, Faheem Akhtar, Jong-Suk Ro

Erschienen in: Electrical Engineering | Ausgabe 2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This paper studies the effect of permanent magnet shape on the performance and efficiency of coreless axial flux permanent magnet synchronous generator (AFPMSG) for low-speed applications. The objective of this study was to come up with an optimal magnet shape among the studied cases that will lead to the highest value of induced EMF, eventually leading to the better output power of the machine. According to the obtained results, a coreless AFPMSG with a triangular magnet shape has higher induced EMF as compared to trapezoidal or skewed-shaped magnets. Also, a topology with rounded-triangular magnets is analyzed to investigate the effect of the rounded edges on the performance of the generator. 3D-finite element analysis (FEA) is used to analyze and compare the back-EMF and output power of all the investigated coreless AFPMSG topologies. This analysis is carried out using JMAG-Designer 19. 1.

Vorheriger Artikel Design and real-time implementation of an adaptive fast terminal synergetic controller based on dual RBF neural networks for voltage control of DC–DC step-down converter

Nächster Artikel Assessment of magnetic field induced by overhead power transmission lines in Algerian National Grid

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Amin S, Khan S, Bukhari SSH (2019) A comprehensive review on axial flux machines and its applications. In: 2019 2nd International conference on computing, mathematics and engineering technologies (iCoMET), Sukkur, Pakistan, pp. 1–7, https://doi.org/10.1109/ICOMET.2019.8673422.

Kahourzade S, Mahmoudi A, Ping HW, Uddin MN (2014) A comprehensive review of axial-flux permanent-magnet machines. Can J Electr Computer Eng 37(1):19–33. https://doi.org/10.1109/CJECE.2014.2309322CrossRef

Patterson DJ, Colton JL, Mularcik B, Kennedy BJ, Camilleri S, Rohoza R (2009) A comparison of radial and axial flux structures in electrical machines. In: (2009) IEEE International electric machines and drives conference. Miami, FL, USA, pp. 1029–1035. https://doi.org/10.1109/IEMDC.2009.5075331

Capponi FG, De Donato G, Caricchi F (2012) Recent advances in axial-flux permanent-magnet machine technology. IEEE Trans Ind Appl 48(6):2190–2205. https://doi.org/10.1109/TIA.2012.2226854CrossRef

D. J. Patterson, G. Heins, M. Turner, B. J. Kennedy, M. D. Smith and R. Rohoza (2017) An overview of the compactness of a range of axial flux PM machines. In: 2017 IEEE Workshop on electrical machines design, control and diagnosis (WEMDCD), Nottingham, UK, pp. 27–32, https://doi.org/10.1109/WEMDCD.2017.7947719

Mushid F. C, Dorrell DG (2017) Review of axial flux induction motor for automotive applications. In: 2017 IEEE Workshop on electrical machines design, control and diagnosis (WEMDCD), Nottingham, UK, pp. 146–151, https://doi.org/10.1109/WEMDCD.2017.7947738

Syed QAS, You Y, Kwon B (2012) Design and comparative analysis of single and multi-stack axial flux permanent magnet synchronous generator. Int J Appl Electromagn Mech 39:865–872CrossRef

Daghigh Ali, Javadi Hamid, Torkaman Hossein (2017) Optimal design of coreless axial flux permanent magnet synchronous generator with reduced cost considering improved PM leakage flux model. Electr Power Compon Syst 45(3):264–278. https://doi.org/10.1080/15325008.2016.1248248CrossRef

Cetin E, Daldaban F (2018) Analyzing the profile effects of the various magnet shapes in axial flux PM motors by means of 3D-FEA. Electronics 7:13. https://doi.org/10.3390/electronics7020013CrossRef

10.

Kumar P, Srivastava RK (2018) Influence of rotor magnet shapes on performance of axial flux permanent magnet machines. Prog Electromagn Res C 85:155–165. https://doi.org/10.2528/PIERC18041909CrossRef

11.

Kappatou J, Zalokostas G, Spyratos D (2016) Design optimization of axial flux permanent magnet (AFPM) synchronous machine using 3D FEM analysis. J Electromagn Anal Appl 8:247–260. https://doi.org/10.4236/jemaa.2016.811023CrossRef

12.

Shokri M, Rostami N, Behjat V, Pyrhönen J, Rostami M (2015) Comparison of performance characteristics of axial-flux permanent-magnet synchronous machine with different magnet shapes. IEEE Trans Magn 51(12):1–6. https://doi.org/10.1109/TMAG.2015.2460217CrossRef

13.

Ikram J, Khan N, Khaliq S, Kwon B (2016) Reduction of torque ripple in an axial flux generator using arc shaped trapezoidal magnets in an asymmetric overhang configuration. J Magn 21(4):577–585CrossRef

14.

Hikmawan M, Kasim M, Irasari P, Widiyanto P (2017) Analysis of magnet shape influence on rotor deflection on axial flux permanent magnet generator. In: 2017 International conference on sustainable energy engineering and application (ICSEEA), Jakarta, pp. 91–97, https://doi.org/10.1109/ICSEEA.2017.8267692

15.

Khan S, Bukhari SSH, Ro J (2019) Design and analysis of a 4-kW two-stack coreless axial flux permanent magnet synchronous machine for low-speed applications. IEEE Access 7:173848–173854. https://doi.org/10.1109/ACCESS.2019.2957046CrossRef

16.

Kurihara K, Yoshino H, Shimauchi K (2018) Surface permanent magnet motors with complicated permanent magnet shapes formed by binder-less net shaping process. In: 2018 21st International conference on electrical machines and systems (ICEMS), Jeju, Korea (South), pp. 510–513, https://doi.org/10.23919/ICEMS.2018.8549429

17.

Suzuki H, Sato M, Hanafi AIM, Itoi Y, Suzuki S, Ito A (2017) Magnetic field performance of round layout linear Halbach array using cylinder-shaped permanent magnets. In: 2017 11th International symposium on linear drives for industry applications (LDIA), Osaka, Japan, pp. 1–2, https://doi.org/10.23919/LDIA.2017.8097248

18.

Yamazaki K, Kondo R (2019) Reduction of cross magnetization in interior permanent magnet synchronous motors with V-shape magnet configurations by optimizing rotor slits. In: 2019 IEEE Energy conversion congress and exposition (ECCE), Baltimore, MD, USA, pp. 4873–4879, https://doi.org/10.1109/ECCE.2019.8911875

19.

Hong SG, Park IH (2020) Continuum-sensitivity-based optimization of interior permanent magnet synchronous motor with shape constraint for permanent magnet. IEEE Trans Magn 56(2):1–4. https://doi.org/10.1109/TMAG.2019.2945571MathSciNetCrossRef

20.

Herlina, R. Setiabudy, Rahardjo A. (2017) Cogging torque reduction by modifying stator teeth and permanent magnet shape on a surface mounted PMSG. In: 2017 International seminar on intelligent technology and its applications (ISITIA), Surabaya, Indonesia, pp. 227–232, https://doi.org/10.1109/ISITIA.2017.8124085

21.

Chai F, Bi Y, Pei Y (2018) Magnet shape optimization of two-layer spoke-type axial flux interior permanent magnet machines. Energies 11:15. https://doi.org/10.3390/en11010015CrossRef

22.

Lee H, Shin K, Bang T, Choi J, Cho S (2018) Characteristic Analysis of a V-Shape Interior Permanent Magnet Synchronous Motor According to Design Parameter. In: 2018 21st International conference on electrical machines and systems (ICEMS), Jeju, Korea (South), pp. 505–509, https://doi.org/10.23919/ICEMS.2018.8549336

23.

Dong F, Zhao J, Zhao J, Song J (2019) Thrust ripple reduction of air-core permanent magnet linear synchronous motor based on arc shaping technique and Taguchi method. In: 2019 IEEE International electric machines drives conference (IEMDC), San Diego, CA, USA, pp. 1169–1174, https://doi.org/10.1109/IEMDC.2019.8785144

24.

Reza MM, Ahmad A, Kumar P, Srivastava RK, (2017) Semi-analytical model for triangular skewed permanent magnet axial flux machine. In: 2017 IEEE Transportation electrification conference (ITEC-India), Pune, pp. 1–5, https://doi.org/10.1109/ITEC-India.2017.8333843

25.

Patterson D J, Heins G, Turner M, Kennedy B J, Smith MD, Rohoza R (2017) An overview of the compactness of a range of axial flux PM machines. In: Proceedings - 2017 IEEE workshop on electrical machines design, control and diagnosis, WEMDCD 2017, pp. 27–32, https://doi.org/10.1109/WEMDCD.2017.7947719.

26.

Radwan-Praglowska N (2018) Impact of permanent magnets shape and arrangement for selected parameters in coreless axial flux generator. In: 2018 International symposium on electrical machines (SME), Andrychow, Poland, pp. 1–6, https://doi.org/10.1109/ISEM.2018.8442975

27.

Simon-Sempere V, Simon-Gomez A, Burgos M, Cerquides-Bueno J-R (2021) Optimization of magnets shape for cogging torque reduction in axial-flux permanent magnet motors. IEEE Trans Energy Convers. https://doi.org/10.1109/TEC.2021.3068174CrossRef

28.

Xiao L, Li J, Qu R, Lu Y, Zhang R, Li D (2017) Cogging torque analysis and minimization of axial flux PM machines with combined rectangle-shaped magnet. IEEE Trans Ind Appl 53(2):1018–1027. https://doi.org/10.1109/TIA.2016.2631522CrossRef

29.

Carpi YL, Henaux C, Llibre J, Harribey D (2020) 3D Hybrid model of the axial flux motor accounting magnet shape. IEEE Trans Magn. https://doi.org/10.1109/TMAG.2019.2950892CrossRef

30.

Du ZS, Lipo TA (2020) Reducing torque ripple using axial pole shaping in interior permanent magnet machines. IEEE Trans Ind Appl 56(1):148–157. https://doi.org/10.1109/TIA.2019.2946237CrossRef

31.

Aakif Baig M, Ikram J, Iftikhar A, Bukhari SSH, Khan N, Ro J-S (2020) Minimization of cogging torque in axial field flux switching machine using arc shaped triangular magnets. IEEE Access 8:227193–227201. https://doi.org/10.1109/ACCESS.2020.3044922CrossRef

32.

Yousuf M, Khan F, Ikram J, Badar R, Bukhari SSH, Ro J-S (2021) Reduction of torque ripples in multi-stack slotless axial flux machine by using right angled trapezoidal permanent magnet. IEEE Access 9:22760–22773. https://doi.org/10.1109/ACCESS.2021.3056589CrossRef

Titel: Effect of the magnet shape on the performance of coreless axial flux permanent magnet synchronous generator
verfasst von: Shahbaz Amin
Sadjad Madanzadeh
Sahib Khan
Syed Sabir Hussain Bukhari
Faheem Akhtar
Jong-Suk Ro
Publikationsdatum: 12.07.2021
Verlag: Springer Berlin Heidelberg
Erschienen in: Electrical Engineering / Ausgabe 2/2022
Print ISSN: 0948-7921
Elektronische ISSN: 1432-0487
DOI: https://doi.org/10.1007/s00202-021-01338-x

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence_ieS/© Springer Fachmedien Wiesbaden GmbH, Search Icon, Banner Hanser, Bunte Männchen, die Kunden darstelle, werden von einem riesigen Magneten angezogen. /© Oleksiy Mark, Dr. Daniel Schneider/© Fraunhofer IESE, Interview Level Ten PPA Bild/© LevelTen, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence 2024/© AndreyPopov / Getty Images / iStock, 2023_Antrieb/© supervisuell, ATZ-Webinar: Prototypenfreie Entwicklung durch Offline- und Driver-in-the-Loop-HiL-Tests /© (c) VI-grade

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 2/2022

High performance sensor-less V/f control of surface PMSM in voltage vector plane with ZVV injection and SMO-based position estimation method

Towards a traceable divider for composite voltage waveforms below 1 kV

Adaptive robust unscented Kalman filter with recursive least square for state of charge estimation of batteries

Optimal transmission switching based on probabilistic load flow in power system with large-scale renewable energy integration

Integration and control of lithium-ion BESSs for active network management in smart grids: Sundom smart grid backup feeding case

Fuzzy logic-based voltage regulation of hybrid energy storage system in hybrid electric vehicles

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.