nach oben

Metal Science and Heat Treatment

Erschienen in:

20.12.2023 | TITANIUM AND TITANIUM ALLOYS

Effect of the Temperature and Rate Parameters of Hot Deformation on the Mechanical Behavior of Forged Titanium Alloy VT14 Under Compression and Tension

verfasst von: A. G. Illarionov, F. V. Vodolazskii, Ya. I. Kosmatskii, E. A. Gornostaeva

Erschienen in: Metal Science and Heat Treatment | Ausgabe 7-8/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The structure, the phase composition, and the physical and mechanical properties of a hot-forged billet from titanium alloy VT14 are studied by the methods of microstructural and x-ray diffraction analyses, micro-indentation, thermodynamic computations with the help of the ThermoCalc software, and thermomechanical tests in a Gleeble 3800 facility. The flow stress and the strain heating are shown to depend on the degree of deformation in compressive and tensile tests at strain rates 1 and 10 sec ^{– 1} and temperatures 900, 925, 950, and 975°C. The results of the study are analyzed and compared to the available reported data.

Vorheriger Artikel Investigation of the Effects of Overlapping Passes on Friction Stir Processed Aluminum Alloy 5083

Nächster Artikel Orientation Relationships and Changes in the Composition of S2 Titanium Silicides in Titanium Pseudo-β-Alloy VT47

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. A. Il’in, B. A. Kolachev, and I. S. Pol’kin, Titanium Alloys, Composition, Structure, Properties [in Russian], VILS-MATI, Moscow (2009), 520 p.

V. N. Moiseyev, Titanium Alloys: Russian Aircraft and Aerospace Applications, CRC Press, Boca Raton, FL, USA (2006).

V. N. Moiseyev, F. R. Kulikov, Yu. T. Kirillov, and L. V. Sholokhova, Welded Joints of Titanium Alloys [in Russian], Metallurgiya, Moscow (1979), 248 p.

Anil Kumar, R. K. Gupta, S. K. Manwatkar, et al., “Effect of prior and post-weld heat treatment on electron beam weldments of (α + β) titanium alloy Ti – 5Al – 3Mo – 1.5V,” J. Mater. Eng. Perform., 25(6), 2147 – 2156 (2016). https://doi.org/10.1007/s11665-016-2111-7

M. G. Golkovski, V. V. Samoylenko, I. A. Polyakov, et al., “Welding of a corrosion-resistant composite material based on VT14 titanium alloy obtained using an electron beam emitted into the atmosphere,” IOP Conf. Ser., Mater. Sci. Eng., 168, 012076 (2017). https://doi.org/10.1088/1757-899X/168/1/012076

V. A. Bataev, M. G. Golkovski, V. V. Samoylenko, et al., “Structure and mechanical properties of a two-layered material produced by the E-beam surfacing of Ta and Nb on the titanium base after multiple rolling,” Appl. Surf. Sci., 437, 181 – 189 (2018). https://doi.org/10.1016/j.apsusc.2017.12.114CrossRef

V. K. Aleksandrov, N. F. Anoshkin, A. P. Belozerov, et al., Semiproducts from Titanium Alloys [in Russian], VILS, Moscow (1966), 560 p.

P. I. Polukhin, G. Ya. Gun, and A. M. Galkin, Plastic Deformation Resistance of Metals and Alloys [in Russian], Metallurgiya, Moscow (1983), 352 p.

L. A. Nikol’skii, S. Z. Figlin, V. V. Boytsov, et al., Hot Forging and Pressing of Titanium Alloys [in Russian], Mashinostroenie, Moscow (1975), 285 p.

10.

A. O. Mosleh, A. V. Mikhaylovskaya, A. D. Kotov, et al., “Experimental investigation of the effect of temperature and strain rate on the superplastic deformation behavior of Ti-based alloys in the (α + β) temperature field,” Metals, 8, 819 (2018). https://doi.org/10.3390/met8100819CrossRef

11.

A. O. Mosleh, A. D. Kotov, P. Metsre-Rinn, and A. V. Mikhaylovskaya, “Superplastic forming of Ti – 4Al – 2Mo – 1V alloy: Flow behavior modelling and finite element simulation,” Proc. Manuf., 37, 239 – 246 (2019).

12.

Ya. I. Kosmatskii, B. V. Barichko, N. V. Fokin, and V. D. Nikolenko, “Use of Gleeble 3800 complex in development of technology of hot pressing and upsetting of pipe ends,” Metallurg, No. 4, 36 – 41 (2021).CrossRef

13.

A. G. Illarionov, F. V. Vodolazskii, Ya. I. Kosmatskii, and E. A. Gornostaeva, “Determining temperatures and forces necessary to produce hot-pressed tubes from titanium alloy PT-1M,” Tsvetn. Met., No. 2, 77 – 83 (2021). https://doi.org/10.17580/tsm.2021.02.09

14.

S. A. Saltykov, Stereometric Metallography [in Russian], Metallurgiya, Moscow (1976), 270 p.

15.

S. G. Glazunov and B. A. Kolachev (eds.), Titanium Alloys. The Metallography of Titanium Alloys [in Russian], Metallurgiya, Moscow (1980), 464 p.

16.

H. M. Rietveld, “The Rietveld method,” Phys. Scr., 89(9), Art. 098002 (2014). https://doi.org/10.1088/0031-8949/89/9/098002

17.

W. C. Oliver and G. M. Pharr, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” J. Mater. Res., 7(6), 1564 – 1583 (1992).CrossRef

18.

A. G. Illarionov, F. V. Vodolazskiy, N. A. Barannikova, et al., “Influence of phase composition on thermal expansion of Ti – 0.4Al, Ti – 2.2Al and Ti – 3Al – 2.5V alloys,” J. Alloys Compd., 857, Art. 158049. https://doi.org/10.1016/j.jallcom.2020.158049

19.

A. G. Illarionov, A. S. Ushakova, and F. V. Vodolazsky, “ThermoCalc modelling of the effect of chemical composition on the phase transformations temperatures of Ti – 0.4Al alloy,” IOP Conf. Ser., Mater. Sci. Eng., 969, Art. 012029 (2020). https://doi.org/10.1088/1757-899X/969/1/012029

20.

F. V. Vodolazskiy, S. M. Illarionov, and E. A. Gornostaeva, “Calculation of phase composition of α- and near-α-titanium alloys,” Solid State Phenom., 299, 403 – 408 (2020). https://doi.org/10.4028/www.scientific.net/SSP.299.403CrossRef

21.

S. G. Glazunov and B. N. Moiseev, Structural Titanium Alloys [in Russian], Metallurgiya, Moscow (1974), 368 p.

22.

M. L. Bernshteinand A. G. Rakhshtadt (eds.), Physical Metallurgy and Heat Treatment of Steel, in 3 vols, Vol. 1. Methods of Testing and Research, in 2 books, Book 2 [in Russian], Metallurgiya, Moscow (1991), 462 p.

23.

F. W. Syed, V. Anil Kumar, R. K. Gupta, and A. K. Kanjarla, “Role of microstructure on the tension/compression asymmetry in two-phase Ti – 5Al – 3Mo – 1.5V titanium alloy,” J. Alloys Compd., 975, 151 – 162 (2019). https://doi.org/10.1016/j.jallcom.2019.04.272

24.

M. Kh. Shorshorov, The Physical Metallurgy of Steel and Titanium Alloys [in Russian], Nauka, Moscow (1965), 336 p.

25.

P. I. Polukhin, S. S. Gorelik, and V. K. Vorontsov, Physical Fundamentals of Plastic Deformation [in Russian], Metallurgiya, Moscow (1982), 584 p.

26.

Ya. I. Kosmatskii, N. V. Fokin, E. A. Filyaeva, and B. V. Barichko, “A study of the deformability of tube billet from titanium alloy of grade PT-1M,” Vestn. Yuzh.-Ural. Gos. Univer., Ser. Metall., 17(4), 83 – 91 (2017).

27.

Ya. I. Kosmatskii, N. V. Fokin, E. A. Filyaeva, and B. V. Barichko, “A study of the deformability of titanium alloy Ti – 3Al – 2.5V and assessment of the technological possibility of fabrication of hot-pressed tubes from it,” Titan, No. 2, 18 – 22 (2016).

28.

Ya. I. Kosmatskii, N. V. Fokin, E. A. Filyaeva, and B. V. Barichko, “A study of the deformability of tube billet from titanium alloy of grade PT-7M,” Titan, No. 4(58), 34 – 39 (2017).

29.

I. I. Korneev, V. M. Arzhakov, G. G. Barmashenko, et al. (eds.), Forging and Stamping of Nonferrous Metals [in Russian], Mashinostroenie, Moscow (1972), 232 p.

Titel: Effect of the Temperature and Rate Parameters of Hot Deformation on the Mechanical Behavior of Forged Titanium Alloy VT14 Under Compression and Tension
verfasst von: A. G. Illarionov
F. V. Vodolazskii
Ya. I. Kosmatskii
E. A. Gornostaeva
Publikationsdatum: 20.12.2023
Verlag: Springer US
Erschienen in: Metal Science and Heat Treatment / Ausgabe 7-8/2023
Print ISSN: 0026-0673
Elektronische ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-023-00950-x

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2023

Effect of Controlled Thermomechanical Processing Routes on the Structural and Textural States of Low-Carbon Low-Alloy Steel

Effect of Heat Treatment on the Phase Composition of Copper-Zinc Coating on Steels

Analysis of the Anomalous Effect of Heat Treatment on the Structure and Phase Transformations in High-Chromium Tool Steel

Effect of Heat Treatment on Fatigue Strength and Frequency Stability of Tool Steel 6KhS

Investigation of the Effects of Overlapping Passes on Friction Stir Processed Aluminum Alloy 5083

Metal Science and Heat Treatment Volume 65, Number 7

Premium Partner

Marktübersichten