Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
MTZ-Fachkongress

Antriebe und Energiesysteme von morgen


Austausch von Automobil- und Energiewirtschaft

Am 14./15. Mai geht es in Chemnitz um die Mobilitätswende durch Elektro- und Wasserstofffahrzeuge.
Erweiterte Suche
Anmelden
nach oben
Journal of Material Cycles and Waste Management
Erschienen in: Journal of Material Cycles and Waste Management 1/2023

30.11.2022 | Original Article

Effects of temperature zones on pyrolysis products of mixed plastic waste

verfasst von: Tianhao Chang, Chaoyang Li, Fangshuo Fan, Han Wu, Chuansheng Wang, Fengfu Yin

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 1/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Five of the most prevalent plastics in the Chinese market (polypropylene (PP), polyvinyl chloride (PVC), high-density polyethylene (PE), acrylonitrile–butadiene–styrene (ABS) copolymer, and polystyrene (PS)) were mixed to form waste plastic samples, which were then converted into renewable fuels via stepwise pyrolysis conducted up to a temperature of 500 °C. The pyrolysis behavior and product distribution were elucidated at different temperature intervals. The pyrolysis products tended to be highly variable among different temperature intervals. The carbon chain width of plastic-derived oil (PDO) increased significantly from 450 to 500 °C, and C12 became more dominant than C8 with increasing temperature. The oil derived from the pyrolysis of waste plastic samples containing PVC was dechlorinated at 460 °C. Products with carbon chain lengths from C1 to C3 were widely distributed in the non-condensable gas, and alkylation trends were observed for PP/PVC/PE/ABS/PS blends as the temperature interval increased.
Vorheriger Artikel Infectious waste management in Japan: assessment of current trends in waste measurement and reporting in general and psychiatric hospitals
Nächster Artikel Ecological treatment of El Kriymat boiler ash for recovering vanadium, nickel and zinc from sulfate leach liquor

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Gu F, Wang J, Guo J, Fan Y (2020) Dynamic linkages between international oil price, plastic stock index and recycle plastic markets in China. Int Rev Econ Financ 68:167–179CrossRef
2.
Siddiqui MN, Redhwi HH (2009) Pyrolysis of mixed plastics for the recovery of useful products. Fuel Process Technol 90(4):545–552CrossRef
3.
Panda AK, Singh RK, Mishra DK (2010) Thermolysis of waste plastics to liquid fuel: a suitable method for plastic waste management and manufacture of value added products—a world prospective. Renew Sustain Energy Rev 14(1):233–248CrossRef
4.
Melendi-Espina S, Alvarez R, Diez MA, Casal MD (2015) Coal and plastic waste co-pyrolysis by thermal analysis–mass spectrometry. Fuel Process Technol 137:351–358CrossRef
5.
Zhou N, Dai L, Lv Y, Li H, Deng W, Guo F, Ruan R (2021) Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production. Chem Eng J 418:129412CrossRef
6.
Paraschiv M, Kuncser R, Tazerout M, Prisecaru T (2015) New energy value chain through pyrolysis of hospital plastic waste. Appl Therm Eng 87:424–433CrossRef
7.
Marcilla A, Gómez-Siurana A, Valdés F (2007) Catalytic pyrolysis of LDPE over H-beta and HZSM-5 zeolites in dynamic conditions: study of the evolution of the process. J Anal Appl Pyrol 79(1–2):433–442CrossRef
8.
Olazar M, Lopez G, Amutio M, Elordi G, Aguado R, Bilbao J (2009) Influence of FCC catalyst steaming on HDPE pyrolysis product distribution. J Anal Appl Pyrol 85(1–2):359–365CrossRef
9.
Demetrious A, Crossin E (2019) Life cycle assessment of paper and plastic packaging waste in landfill, incineration, and gasification-pyrolysis. J Mater Cycles Waste Manage 21(4):850–860CrossRef
10.
Williams PT, Slaney E (2007) Analysis of products from the pyrolysis and liquefaction of single plastics and waste plastic mixtures. Resour Conserv Recycl 51(4):754–769CrossRef
11.
Das P, Tiwari P (2018) The effect of slow pyrolysis on the conversion of packaging waste plastics (PE and PP) into fuel. Waste Manage 79:615–624CrossRef
12.
Zhang Y, Fu Z, Wang W, Ji G, Zhao M, Li A (2021) Kinetics, product evolution, and mechanism for the pyrolysis of typical plastic waste. ACS Sustain Chem Eng
13.
Jaafar Y, Abdelouahed L, El Hage R, El Samrani A, Taouk B (2022) Pyrolysis of common plastics and their mixtures to produce valuable petroleum-like products. Polym Degrad Stab 195:109770CrossRef
14.
Singh G, Varma AK, Almas S, Jana A, Mondal P, Seay J (2019) Pyrolysis kinetic study of waste milk packets using thermogravimetric analysis and product characterization. J Mater Cycles Waste Manage 21(6):1350–1360CrossRef
15.
Abbas-Abadi MS, Haghighi MN, Yeganeh H, McDonald AG (2014) Evaluation of pyrolysis process parameters on polypropylene degradation products. J Anal Appl Pyrol 109:272–277CrossRef
16.
Huang WC, Huang MS, Huang CF, Chen CC, Ou KL (2010) Thermochemical conversion of polymer wastes into hydrocarbon fuels over various fluidizing cracking catalysts. Fuel 89(9):2305–2316CrossRef
17.
Kaminsky W, Zorriqueta IJN (2007) Catalytical and thermal pyrolysis of polyolefins. J Anal Appl Pyrol 79(1–2):368–374CrossRef
18.
Aisien ET, Otuya IC, Aisien FA (2021) Thermal and catalytic pyrolysis of waste polypropylene plastic using spent FCC catalyst. Environ Technol Innov 22:101455CrossRef
19.
Čolnik M, Kotnik P, Knez Ž, Škerget M (2021) Hydrothermal decomposition of polyethylene waste to hydrocarbons rich oil. J Supercrit Fluids 169:105136CrossRef
20.
Fan L, Zhang Y, Liu S, Zhou N, Chen P, Liu Y, Ruan R (2017) Ex-situ catalytic upgrading of vapors from microwave-assisted pyrolysis of low-density polyethylene with MgO. Energy Convers Manage 149:432–441CrossRef
21.
Miandad R, Barakat MA, Aburiazaiza AS, Rehan M, Ismail IMI, Nizami AS (2017) Effect of plastic waste types on pyrolysis liquid oil. Int Biodeterior Biodegrad 119:239–252CrossRef
22.
Miandad R, Nizami AS, Rehan M, Barakat MA, Khan MI, Mustafa A, Murphy JD (2016) Influence of temperature and reaction time on the conversion of polystyrene waste to pyrolysis liquid oil. Waste Manage 58:250–259CrossRef
23.
Sogancioglu M, Ahmetli G, Yel E (2017) A comparative study on waste plastics pyrolysis liquid products quantity and energy recovery potential. Energy Procedia 118:221–226CrossRef
24.
Çit İ, Sınağ A, Yumak T, Uçar S, Mısırlıoğlu Z, Canel M (2010) Comparative pyrolysis of polyolefins (PP and LDPE) and PET. Polym Bull 64(8):817–834CrossRef
25.
Akoueson F, Chbib C, Monchy S, Paul-Pont I, Doyen P, Dehaut A, Duflos G (2021) Identification and quantification of plastic additives using pyrolysis-GC/MS: a review. Sci Total Environ 773:145073CrossRef
26.
Adrados A, De Marco I, Caballero BM, López A, Laresgoiti MF, Torres A (2012) Pyrolysis of plastic packaging waste: a comparison of plastic residuals from material recovery facilities with simulated plastic waste. Waste Manage 32(5):826–832CrossRef
27.
López A, De Marco I, Caballero BM, Laresgoiti MF, Adrados A (2011) Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor. Chem Eng J 173(1):62–71CrossRef
28.
Win MM, Asari M, Hayakawa R, Hosoda H, Yano J, Sakai SI (2020) Gas and tar generation behavior during flash pyrolysis of wood pellet and plastic. J Mater Cycles Waste Manage 22(2):547–555CrossRef
29.
Soliman A, Farag HA, Nassef E, Amer A, ElTaweel Y (2020) Pyrolysis of low-density polyethylene waste plastics using mixtures of catalysts. J Mater Cycles Waste Manage 22(5):1399–1406CrossRef
30.
Nunome Y, Suzuki T, Nedjalkov I, Ueki Y, Yoshiie R, Naruse I (2019) Generation behavior of tar from ABS, PC, and PE during pyrolysis and steam gasification by mass spectrometry. J Mater Cycles Waste Manage 21(6):1300–1310CrossRef
31.
Lei J, Yuan G, Weerachanchai P, Lee SW, Li K, Wang JY, Yang Y (2018) Investigation on thermal dechlorination and catalytic pyrolysis in a continuous process for liquid fuel recovery from mixed plastic wastes. J Mater Cycles Waste Manage 20(1):137–146CrossRef
32.
Bhagat SP, Gera P, Bhavanam A (2018) Catalytic co-pyrolysis of Pterospermum acerifolium and plastic waste. J Mater Cycles Waste Manage 20(4):1923–1933CrossRef
33.
Premalatha N, Prathiba R, Miranda MA, Miranda LR (2021) Pyrolysis of polypropylene waste using sulfonated carbon catalyst synthesized from sugarcane bagasse. J Mater Cycles Waste Manage 23(3):1002–1014CrossRef
34.
Das P, Tiwari P (2018) Valorization of packaging plastic waste by slow pyrolysis. Resour Conserv Recycl 128:69–77CrossRef
35.
Ma ZF, Jiang WJ, Yang S (2019) China Plastics Processing Industry (2018). China Plastics 33(06): 27–131+146.
36.
Sharuddin SDA, Abnisa F, Daud WMAW, Aroua MK (2016) A review on pyrolysis of plastic wastes. Energy Convers Manage 115:308–326CrossRef
37.
Al-Salem SM, Chandrasekaran SR, Dutta A, Sharma BK (2021) Study of the fuel properties of extracted oils obtained from low and linear low density polyethylene pyrolysis. Fuel 304:121396CrossRef
38.
Marcilla A, Beltrán MI, Navarro R (2009) Evolution of products during the degradation of polyethylene in a batch reactor. J Anal Appl Pyrol 86(1):14–21CrossRef
39.
Pan R, Martins MF, Debenest G (2021) Pyrolysis of waste polyethylene in a semi-batch reactor to produce liquid fuel: optimization of operating conditions. Energy Convers Manage 237:114114CrossRef
40.
Torres D, Jiang Y, Monsalve DS, Leeke GA (2021) Chlorine removal from the pyrolysis of urban polyolefinic waste in a semi-batch reactor. J Environ Chem Eng 9(1):104920CrossRef
41.
Wu Y, Zhu J, Wang Y, Yang H, Jin L, Hu H (2021) Insight into co-pyrolysis interactions of Pingshuo coal and high-density polyethylene via in-situ Py-TOF-MS and EPR. Fuel 303:121199CrossRef
42.
Wang Y, Wu K, Liu Q, Zhang H (2021) Low chlorine oil production through fast pyrolysis of mixed plastics combined with hydrothermal dechlorination pretreatment. Process Saf Environ Prot 149:105–114CrossRef
43.
Wang S, Kim H, Lee D, Lee YR, Won Y, Hwang BW, Lee KH (2021) Drop-in fuel production with plastic waste pyrolysis oil over catalytic separation. Fuel 305:121440CrossRef
44.
Ribeiro F, Okoffo ED, O’Brien JW, Fraissinet-Tachet S, O’Brien S, Gallen M, Thomas KV (2020) Quantitative analysis of selected plastics in high-commercial-value Australian seafood by pyrolysis gas chromatography mass spectrometry. Environ Sci Technol 54(15):9408–9417CrossRef
45.
Singh RK, Ruj B (2016) Time and temperature depended fuel gas generation from pyrolysis of real world municipal plastic waste. Fuel 174:164–171CrossRef
46.
Xue Y, Zhou S, Brown RC, Kelkar A, Bai X (2015) Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor. Fuel 156:40–46CrossRef
47.
Jamradloedluk J, Lertsatitthanakorn C (2014) Characterization and utilization of char derived from fast pyrolysis of plastic wastes. Proc Eng 69:1437–1442CrossRef
48.
Singh E, Kumar A, Khapre A, Saikia P, Shukla SK, Kumar S (2020) Efficient removal of arsenic using plastic waste char: Prevailing mechanism and sorption performance. J Water Proc Eng 33:101095CrossRef
49.
Srinivasan S, Valsadwala AS, Begum SS, Samui AB (2021) Experimental investigation on the influence of novel catalyst in co-pyrolysis of polymeric waste: Characterization of oil and preparation of char reinforced composites. J Clean Prod 316:128225CrossRef
50.
Fan Y, Fowler GD, Zhao M (2020) The past, present and future of carbon black as a rubber reinforcing filler–A review. J Clean Prod 247:119115CrossRef
Metadaten
Titel
Effects of temperature zones on pyrolysis products of mixed plastic waste
verfasst von
Tianhao Chang
Chaoyang Li
Fangshuo Fan
Han Wu
Chuansheng Wang
Fengfu Yin
Publikationsdatum
30.11.2022
Verlag
Springer Japan
Erschienen in
Journal of Material Cycles and Waste Management / Ausgabe 1/2023
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI
https://doi.org/10.1007/s10163-022-01549-9

Weitere Artikel der Ausgabe 1/2023

Journal of Material Cycles and Waste Management 1/2023 Zur Ausgabe

REVIEW

4R of rubber waste management: current and outlook

ORIGINAL ARTICLE

Eco-friendly recovery process of lithium from reduction roasting residue powder based on hydrothermal extraction

ORIGINAL ARTICLE

Ecological treatment of El Kriymat boiler ash for recovering vanadium, nickel and zinc from sulfate leach liquor

ORIGINAL ARTICLE

A novel mechanical plant compression system for biomass fuel and acquisition of squeezed liquid with water-soluble lignin as anti-virus materials

ORIGINAL ARTICLE

Infectious waste management in Japan: assessment of current trends in waste measurement and reporting in general and psychiatric hospitals

ORIGINAL ARTICLE

Application of life cycle assessment of system solution scenarios for municipal solid waste management in Turkey