nach oben

Journal of Materials Science

Erschienen in:

01.10.2014

Electrophoretic deposition of alumina, yttria, yttrium aluminium garnet and lutetium aluminium garnet

verfasst von: Michael Bredol, Joanna Micior, Stephan Klemme

Erschienen in: Journal of Materials Science | Ausgabe 20/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The electrophoretic deposition (EPD) method has been adapted for the deposition of ceramic green bodies from aqueous nanodispersions of alumina, yttria, yttrium aluminium garnet and lutetium aluminium garnet. These materials have been selected, since they are promising candidates for optically transparent ceramics. Films as well as cylindrical bodies have been successfully prepared by application of pulsed direct current (pDC) EPD. To guarantee constant deposition yield during pDC, a variant with variable pulse widths and pulse heights has been developed. The obtained green bodies were studied by surface area analysis, scanning electron microscopy, optical transmittance measurements, determination of pycnometric density and sintering behaviour. The effect of colloid-chemical dispersion properties on green and sintered ceramics is discussed as well. The green ceramics received are nanoporous and dense, providing excellent properties for further processing under mild conditions to optical materials. For comparison, EPD-formed green bodies were either processed directly to ceramic bodies or after additional compacting by hot-pressing in a piston-cylinder apparatus.

Vorheriger Artikel Behavior of indium oxide in zinc phosphate and borophosphate glasses

Nächster Artikel Homogeneous and heterogeneous precipitation mechanisms in a binary Mg–Nd alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Krell A, Klimke J (2006) Effects of the homogeneity of particle coordination on solid-state sintering of transparent alumina. J Am Ceram Soc 89(6):1985–1992CrossRef

Ferkel H, Hellmig R (1999) Effect of nanopowder deagglomeration on the densities of nanocrystalline ceramic green bodies and their sintering behaviour. Nanostruct Mater 11(5):617–622CrossRef

Apetz R, Bruggen MP (2003) Transparent alumina: a light-scattering model. J Am Ceram Soc 86(3):480–486CrossRef

Casolco S, Xu J, Garay J (2008) Transparent / translucent polycrystalline nanostructured yttria stabilized zirconia with varying colors. Scr Mater 58(6):516–519CrossRef

Ikesue A, Kinoshita T, Kamata K, Yoshida K (1995) Fabrication and optical properties of high-performance polycrystalline Nd: YAG ceramics for solid-state lasers. J Am Ceram Soc 78(4):1033–1040CrossRef

Lange FF (1989) Powder processing science and technology for increased reliability. J Am Ceram Soc 72(1):3–15CrossRef

Qin X, Yang H, Zhou G, Luo D, Yang Y, Zhang J, Wang S, Ma J, Tang D (2012) Fabrication and properties of highly transparent Er:YAG ceramics. Opt Mater 34(6):973–976CrossRef

Sarkar P, Nicholson PS (1996) Electrophoretic deposition (EPD): mechanisms, kinetics, and application to ceramics. J Am Ceram Soc 79(8):1987–2002CrossRef

Singh A, English NJ, Ryan KM (2013) Highly ordered nanorod assemblies extending over device scale areas and in controlled multilayers by electrophoretic deposition. J Phys Chem B 117(6):1608–1615CrossRef

10.

Kort KR, Banerjee S (2013) Oriented electrophoretic deposition of GdOCl nanoplatelets. J Phys Chem B 117(6):1585–1591CrossRef

11.

Ahmed S, Ryan KM (2008) Close-packed gold-nanocrystal assemblies deposited with complete selectivity into lithographic trenches. Adv Mater 20(24):4745–4750CrossRef

12.

Kim J, Anderson JL, Garoff S, Sides PJ (2002) Effects of zeta potential and electrolyte on particle interactions on an electrode under ac polarization. Langmuir 18(14):5387–5391CrossRef

13.

Trau M, Saville DA, Aksay IA (1997) Assembly of colloidal crystals at electrode interfaces. Langmuir 13(24):6375–6381CrossRef

14.

Falk G (2013) Directed self-assembly of colloidal model systems on charge-selective surfaces in external electric fields: theory and numerical analysis. J Phys Chem B 117(6):1527–1536CrossRef

15.

Boccaccini AR, Keim S, Ma R, Li Y, Zhitomirsky I (2010) Electrophoretic deposition of biomaterials. J R Soc Interface 7(Suppl 5):S581–S613CrossRef

16.

Neirinck B, Van der Biest O, Vleugels J (2013) A current opinion on electrophoretic deposition in pulsed and alternating fields. J Phys Chem B 117(6):1516–1526CrossRef

17.

Ammam M (2012) Electrophoretic deposition under modulated electric fields: a review. RSC Adv 2:7633–7646CrossRef

18.

Naim MN, Iijima M, Kamiya H, Lenggoro IW (2010) Electrophoretic packing structure from aqueous nanoparticle suspension in pulse DC charging. Colloids Surf Physicochem Eng Aspects 360:13–19CrossRef

19.

Neirinck B, Fransaer J, Van der Biest O, Vleugels J (2009) Aqueous electrophoretic deposition in asymmetric AC electric fields (AC-EPD). Electrochem Commun 11(1):57–60CrossRef

20.

Naim MN, Iijima M, Sasaki K, Kuwata M, Kamiya H, Lenggoro IW (2010) Electrical-driven disaggregation of the two-dimensional assembly of colloidal polymer particles under pulse DC charging. Adv Powder Technol 21(5):534–541CrossRef

21.

Nold A, Clasen R (2010) Bubble-free electrophoretic shaping from aqueous suspension with micro point-electrode. J Eur Ceram Soc 30(14):2971–2975CrossRef

22.

Besra L, Uchikoshi T, Suzuki TS, Sakka Y (2008) Bubble-free aqueous electrophoretic deposition (EPD) by pulse-potential application. J Am Ceram Soc 91:3154–3159CrossRef

23.

Besra L, Uchikoshi T, Suzuki TS, Sakka Y (2009) Application of constant current pulse to suppress bubble incorporation and control deposit morphology during aqueous electrophoretic deposition (EPD). J Eur Ceram Soc 29:1837–1845CrossRef

24.

Besra L, Uchikoshi T, Suzuki TS, Sakka Y (2010) Experimental verification of pH localization mechanism of particle consolidation at the electrode/solution interface and its application to pulsed DC electrophoretic deposition (EPD). J Eur Ceram Soc 30:1187–1193CrossRef

25.

Naim MN, Kuwata M, Kamiya H, Lenggoro IW (2009) Deposition of TiO2 nanoparticles in surfactant-containing aqueous suspension by a pulsed DC charging-mode electrophoresis. J Ceram Soc Jpn 117:127–132CrossRef

26.

Yu B, Khoo SB (2002) Controllable zeolite films on electrodes—comparing dc voltage electrophoretic deposition and a novel pulsed voltage method. Electrochem Commun 4:737–742CrossRef

27.

Ermolina I, Morgan H (2005) The electrokinetic properties of latex particles: comparison of electrophoresis and dielectrophoresis. J Colloid Interface Sci 285(1):419–428CrossRef

28.

Prasse T, Flandin L, Schulte K, Bauhofer W (1998) In situ observation of electric field induced agglomeration of carbon black in epoxy resin. Appl Phys Lett 72(22):2903–2905CrossRef

29.

Nap RJ, Park Y, Wong JY, Szleifer I (2013) Adsorption of acid and polymer coated nanoparticles: a statistical thermodynamics approach. Langmuir 29(47):14482–14493CrossRef

30.

Ahualli S, Jiménez ML, Carrique F, Delgado AV (2009) AC electrokinetics of concentrated suspensions of soft particles. Langmuir 25(4):1986–1997CrossRef

31.

Bredol M, Micior J (2013) Preparation and characterization of nanodispersions of yttria, yttrium aluminium garnet and lutetium aluminium garnet. J Colloid Interface Sci 402:27–33CrossRef

32.

Franks GV, Gan Y (2007) Charging behavior at the alumina-water interface and implications for ceramic processing. J Am Ceram Soc 90:3373–3388CrossRef

33.

Tarì G, Ferreira JMF, Lyckfeldt O (1998) Influence of the stabilising mechanism and solid loading on slip casting of alumina. J Eur Ceram Soc 18:479–486CrossRef

34.

Tseng WJ, Wu CH (2002) Aggregation, rheology and electrophoretic packing structure of aqueous \(\hbox{ Al }_2\hbox{ O }_3\) nanoparticle suspensions. Acta Mater 50:3757–3766CrossRef

35.

Tang FQ, Uchikoshi T, Ozawa K, Sakka Y (2002) Electrophoretic deposition of aqueous nano-gamma-\(\hbox{ Al }_2\hbox{ O }_3\) suspensions. Mater Res Bull 37:653–660CrossRef

36.

Novak S, Konig K (2009) Fabrication of alumina parts by electrophoretic deposition from ethanol and aqueous suspensions. Ceram Int 35:2823–2829CrossRef

37.

Klemme S, O’Neill HSC (1997) The reaction MgCr2O4 + SiO2 = Cr2O3 + MgSiO3 and the free energy of formation of magnesiochromite (MgCr2O4). Contrib Mineral Petrol 130(1):59–65CrossRef

38.

Beyer C, Berndt J, Tappe S, Klemme S (2013) Trace element partitioning between perovskite and kimberlite to carbonatite melt: new experimental constraints. Chem Geol 353:132–139CrossRef

39.

Popa AM, Vleugels J, Vermant J, Van der Biest O (2006) Influence of surfactant addition sequence on the suspension properties and electrophoretic deposition behaviour of alumina and zirconia. J Eur Ceram Soc 26:933–939CrossRef

40.

Briscoe BJ, Khan AU, Luckham PF (1998) Optimising the dispersion on an alumina suspension using commercial polyvalent electrolyte dispersants. J Eur Ceram Soc 18:2141–2147CrossRef

41.

Rao Y, Johnson R (2013) Pressure slip casting: a novel process for producing alumina bodies with superior green density. InterCeram Int Ceram Rev 62:218–220

42.

Stotz S (1978) Field dependence of the electrophoretic mobility of particles suspended in low-conductivity liquids. J Colloid Interface Sci 65(1):118–130CrossRef

43.

Iso Y, Takeshita S, Isobe T (2014) Electrophoretic deposition and characterization of transparent nanocomposite films of YVO4:Bi3+, Eu3+ nanophosphor and silicone-modified acrylic resin. Langmuir 30(5):1465–1471CrossRef

Titel: Electrophoretic deposition of alumina, yttria, yttrium aluminium garnet and lutetium aluminium garnet
verfasst von: Michael Bredol
Joanna Micior
Stephan Klemme
Publikationsdatum: 01.10.2014
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 20/2014
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-014-8403-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 20/2014

Effect of spatial distribution and aging of ZVI on the reactivity of resin–ZVI composites for arsenite removal

Near infrared nonlinearity in silver telluride-core/carbon-sheath and tellurium-core/carbon-sheath nanostructures synthesized by reduction carbonization approach

Ion-exchange kinetics and thermal decomposition characteristics of Fe2+-exchanged alginic acid membrane for the formation of iron oxide nanoparticles

Phase coexistence in Bi1−x Pr x FeO3 ceramics

Enhancement of mechanical properties of biocompatible Ti–45Nb alloy by hydrostatic extrusion

Hydrophobic carbon nanotubes for removal of oils and organics from water

Premium Partner

Marktübersichten