nach oben

Journal of Materials Science: Materials in Electronics

Erschienen in:

21.09.2018

Enhancement of degradation of mordant orange, safranin-O and acridine orange by CuS nanoparticles in the presence of H₂O₂ in dark and in ambient light

verfasst von: Fizza Siddique, M. A. Rafiq, M. F. Afsar, M. M. Hasan, M. M. Chaudhry

Erschienen in: Journal of Materials Science: Materials in Electronics | Ausgabe 22/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

CuS nanoparticles synthesized by solid-state reaction were used to remove Mordant Orange (MO), Acridine Orange (AO), and Safranin-O (SO) from water. Average diameter, band gap and surface area of CuS nanoparticles were 50 nm, 3.2 eV and 1.52 m²/g respectively. CuS nanoparticles removed 22%, 45%, 51% SO, AO, and MO in 180 min respectively. Addition of H₂O₂ resulted in 100% removal of dyes in 180 min in ambient light and 75% dye removal in dark. H₂O₂ also increased apparent reaction rate constant (K_app). Details of dye removal mechanism by CuS nanoparticles and enhanced dye removal due to H₂O₂ is provided.

Vorheriger Artikel Ferroelectric and magneto-dielectric properties of yttrium doped BaTiO3–CoFe2O4 multiferroic composite

Nächster Artikel Effect of graphene nanosheets and potassium sodium niobate on microwave absorbing and mechanical properties of quartz fiber/polyimide composites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

WWAP (2017) Wastewater. The Untapped Resource

E. Silveira, P.P. Marques, S.S. Silva et al., Selection of Pseudomonas for industrial textile dyes decolourization. Int. Biodeterior. Biodegrad. 63, 230–235 (2009). https://doi.org/10.1016/j.ibiod.2008.09.007 CrossRef

L. Pereira, M. Alves (2012) Dyes-environmental impact and remediation. Environmental Protection Strategies for Sustainable Development. Springer, Dordrecht, pp. 111–162CrossRef

B. Bethi, S.H. Sonawane, B.A. Bhanvase, S.P. Gumfekar, Nanomaterials-based advanced oxidation processes for wastewater treatment: a review. Chem. Eng. Process. Process Intensif. 109, 178–189 (2016)CrossRef

K.R. Nemade, S.A. Waghuley, Band gap engineering of CuS nanoparticles for artificial photosynthesis. Mater. Sci. Semicond. Process. 39, 781–785 (2015). https://doi.org/10.1016/J.MSSP.2015.05.045 CrossRef

P. Ajibade, N. Botha, Synthesis, optical and structural properties of copper sulfide nanocrystals from single molecule precursors. Nanomaterials 7, 32 (2017). https://doi.org/10.3390/nano7020032 CrossRef

F.A. Sabah, N.M. Ahmed, Z. Hassan, H.S. Rasheed, High performance CuS p-type thin film as a hydrogen gas sensor. Sens Actuators 249, 68–76 (2016). https://doi.org/10.1016/j.sna.2016.08.026 CrossRef

A. Šetkus, A. Galdikas, A. Mironas et al., Properties of CuxS thin film based structures: influence on the sensitivity to ammonia at room temperatures. Thin Solid Films 391, 275–281 (2001). https://doi.org/10.1016/S0040-6090(01)00995-6 CrossRef

R.S. Mane, C.D. Lokhande, Chemical deposition method for metal chalcogenide thin films. Mater. Chem. Phys. 65, 1–31 (2000). https://doi.org/10.1016/S0254-0584(00)00217-0 CrossRef

10.

D. Ayodhya, M. Venkatesham, A. Santoshi kumari et al., Photocatalytic degradation of dye pollutants under solar, visible and UV lights using green synthesised CuS nanoparticles. J. Exp. Nanosci. 11, 418–432 (2016). https://doi.org/10.1080/17458080.2015.1070312 CrossRef

11.

A. Casaca, E.B. Lopes, A.P. Gonçalves, M. Almeida, Electrical transport properties of CuS single crystals. J. Phys. Condens. Matter 24, 015701 (2012). https://doi.org/10.1088/0953-8984/24/1/015701 CrossRef

12.

E.J. Silvester, F. Grieser, B.A. Sexton, T.W. Healy, Spectroscopic studies on copper sulfide sols. Langmuir 7, 2917–2922 (1991)CrossRef

13.

D. Jiang, W. Hu, H. Wang et al., Synthesis, formation mechanism and photocatalytic property of nanoplate-based copper sulfide hierarchical hollow spheres. Chem. Eng. J. 189–190, 443–450 (2012). https://doi.org/10.1016/j.cej.2012.02.010 CrossRef

14.

W. Xu, S. Zhu, Y. Liang et al., Nanoporous CuS with excellent photocatalytic property. Sci. Rep. 5, 18125 (2015). https://doi.org/10.1038/srep18125 CrossRef

15.

L. Mi, W. Wei, Z. Zheng et al., Tunable properties induced by ion exchange in multilayer intertwined CuS microflowers with hierarchal structures. Nanoscale 5, 6589 (2013). https://doi.org/10.1039/c3nr01438j CrossRef

16.

X.-H. Liao, N.-Y. Chen, S. Xu et al., A microwave assisted heating method for the preparation of copper sulfide nanorods. J. Cryst. Growth 252, 593–598 (2003). https://doi.org/10.1016/S0022-0248(03)01030-3 CrossRef

17.

U. Shamraiz, A. Badshah, R.A. Hussain et al., Surfactant free fabrication of copper sulphide (CuS–Cu2S) nanoparticles from single source precursor for photocatalytic applications. J. Saudi Chem. Soc. 21, 390–398 (2017). https://doi.org/10.1016/j.jscs.2015.07.005 CrossRef

18.

J. Zhang, Z. Zhang, Hydrothermal synthesis and optical properties of CuS nanoplates. Mater. Lett. 62, 2279–2281 (2008). https://doi.org/10.1016/j.matlet.2007.11.069 CrossRef

19.

T.Y. Ding, M.S. Wang, S.P. Guo et al., CuS nanoflowers prepared by a polyol route and their photocatalytic property. Mater. Lett. 62, 4529–4531 (2008). https://doi.org/10.1016/j.matlet.2008.08.031 CrossRef

20.

S. Adhikari, D. Sarkar, G. Madras, Hierarchical design of CuS architectures for visible light photocatalysis of 4–Chlorophenol. ACS Omega. https://doi.org/10.1021/acsomega.7b00669 CrossRef

21.

Z. Cheng, S. Wang, Q. Wang, B. Geng, A facile solution chemical route to self-assembly of CuS ball-flowers and their application as an efficient photocatalyst. CrystEngComm 12, 144–149 (2010). https://doi.org/10.1039/b914902c CrossRef

22.

X. Meng, G. Tian, Y. Chen et al., Hierarchical CuS hollow nanospheres and their structure-enhanced visible light photocatalytic properties. CrystEngComm 15, 5144–5149 (2013). https://doi.org/10.1039/c3ce40195b CrossRef

23.

B. Srinivas, B.G. Kumar, K. Muralidharan, Stabilizer free copper sulphide nanostructures for rapid photocatalytic decomposition of rhodamine B. J. Mol. Catal. A Chem. 410, 8–18 (2015). https://doi.org/10.1016/j.molcata.2015.08.028 CrossRef

24.

M. Saranya, C. Santhosh, R. Ramachandran et al., Hydrothermal growth of CuS nanostructures and its photocatalytic properties. Powder Technol. 252, 25–32 (2014). https://doi.org/10.1016/j.powtec.2013.10.031 CrossRef

25.

S. Zinatloo-Ajabshir, S. Mortazavi-Derazkola, M. Salavati-Niasari, Preparation, characterization and photocatalytic degradation of methyl violet pollutant of holmium oxide nanostructures prepared through a facile precipitation method. J. Mol. Liq. 231, 306–313 (2017). https://doi.org/10.1016/j.molliq.2017.02.002 CrossRef

26.

S. Zinatloo-Ajabshir, M. Salavati-Niasari, Photo-catalytic degradation of erythrosine and eriochrome black T dyes using Nd2Zr2O7nanostructures prepared by a modified Pechini approach. Sep. Purif. Technol. 179, 77–85 (2017). https://doi.org/10.1016/j.seppur.2017.01.037 CrossRef

27.

R. Monsef, M. Ghiyasiyan-Arani, M. Salavati-Niasari, Application of ultrasound-aided method for the synthesis of NdVO4nano-photocatalyst and investigation of eliminate dye in contaminant water. Ultrason. Sonochem. 42, 201–211 (2018). https://doi.org/10.1016/j.ultsonch.2017.11.025 CrossRef

28.

S. Zinatloo-Ajabshir, Z. Salehi, M. Salavati-Niasari, Green synthesis of Dy2Ce2O7ceramic nanostructures using juice of Punica granatum and their efficient application as photocatalytic degradation of organic contaminants under visible light. Ceram. Int. 44, 3873–3883 (2018). https://doi.org/10.1016/j.ceramint.2017.11.177 CrossRef

29.

F. Beshkar, S. Zinatloo-Ajabshir, S. Bagheri, M. Salavati-Niasari, Novel preparation of highly photocatalytically active copper chromite nanostructured material via a simple hydrothermal route. PLoS ONE 12, 17–18 (2017). https://doi.org/10.1371/journal.pone.0158549 CrossRef

30.

S. Zinatloo-Ajabshir, Z. Salehi, M. Salavati-Niasari, Preparation, characterization and photocatalytic properties of Pr₂Ce₂O₇ nanostructures via a facile procedure. RSC Adv. 6, 107785–107792 (2016). https://doi.org/10.1039/c6ra18470g CrossRef

31.

M. Ahmad, M.A. Rafiq, Z. Imran et al., Charge conduction and relaxation in MoS₂ nanoflakes synthesized by simple solid state reaction. J. Appl. Phys. 114(4), 043710 (2013). https://doi.org/10.1063/1.4816570 CrossRef

32.

M.F. Afsar, M.A. Rafiq, A.I.Y. Tok, Two-dimensional SnS nanoflakes: synthesis and application to acetone and alcohol sensors. RSC Adv. 7, 21556–21566 (2017). https://doi.org/10.1039/C7RA03004E CrossRef

33.

M.F. Afsar, A. Jamil, M.A. Rafiq, Ferroelectric, dielectric and electrical behavior of two-dimensional lead sulphide nanosheets. Adv. Nat. Sci. Nanosci. Nanotechnol. 8(4), 045010 (2017). https://doi.org/10.1088/2043-6254/aa8b3d CrossRef

34.

A.M. Freeda, R.N. Madhav, Synthesis and characterization of nano-structured materials CuS (Covellite) for their applications. Nanotechnol. Nanosci. 1, 976–7630 (2010)

35.

P.V. Quintana-ramirez, M.C. Arenas-arrocena, J. Santos-cruz, Growth evolution and phase transition from chalcocite to digenite in nanocrystalline copper sulfide: morphological, optical and electrical properties additional figures grain size (nm). Beilstein J. Nanotechnol. 5, 2–5 (2011). https://doi.org/10.3762/bjnano.5.166 CrossRef

36.

A.E. Raevskaya, A.L. Stroyuk, S.Y. Kuchmii, A.I. Kryukov, Catalytic activity of CuS nanoparticles in hydrosulfide ions air oxidation. J. Mol. Catal. A Chem. 212, 259–265 (2004). https://doi.org/10.1016/j.molcata.2003.11.010 CrossRef

37.

P.S. Khiew, S. Radiman, N.M. Huang, M.S. Ahamd, Synthesis and characterization of copper sulfide nanoparticles in hexagonal phase lyotropic liquid crystal. J. Cryst. Growth 268, 227–237 (2004). https://doi.org/10.1016/j.jcrysgro.2004.05.020 CrossRef

38.

F.A. Sabah, N.M. Ahmed, Z. Hassan, H.S. Rasheed, CuS P-type thin film characteristics for different copper to sulphur molar ratios for light emitting diode application. J. Sci. Res. Dev. 2, 95–99 (2015)

39.

S.K. Nath, P.K. Kalita (2017) Effect of capping agents on the optical properties of synthesized CuS nanostructures. In: Materials Today: Proceedings. Elsevier, pp 3972–3978

40.

S.K. Nath, P.K. Kalita (2017) Effect of capping agents on the optical properties of synthesized CuS nanostructures. In: Materials Today: Proceedings. pp 3972–3978CrossRef

41.

R.S. Christy, J. Thampi, T. Kumaran, Phase transition in CuS nanoparticles. J. Non-Oxide Glas. 6, 13–22 (2014)

42.

X. Chen, Z. Wu, D. Liu, Z. Gao, Preparation of ZnO photocatalyst for the efficient and rapid photocatalytic degradation of azo dyes. Nanoscale Res. Lett. 12(1), 143 (2017). https://doi.org/10.1186/s11671-017-1904-4 CrossRef

43.

K. Mahajan, V.P. Patil, S.H. Sonawane, S.H. Sonawane G, Ultrasonic, photocatalytic and sonophotocatalytic degradation of Basic Red-2 by using Nb₂O₅ nano catalyst. AIMS Biophys. 3, 415–430 (2016). https://doi.org/10.3934/biophy.2016.3.415 CrossRef

44.

N.G. Tan, J.A. Field, G. Lettinga, Reduction of the azo dye mordant orange 1 by exposure to granules.pdf. Bioresour. Technol. 67(1), 35–42 (1999)CrossRef

45.

Z. Li, L. Mi, W. Chen et al., Three-dimensional CuS hierarchical architectures as recyclable catalysts for dye decolorization. CrystEngComm 14, 3965 (2012). https://doi.org/10.1039/c2ce00018k CrossRef

46.

S.S. Batool, S. Hassan, Z. Imran et al., The enhancement in photocatalytic activity of bismuth modified silica and bismuth silicate nanofibers. Catal. Commun. 49, 39–42 (2014). https://doi.org/10.1016/j.catcom.2014.02.001 CrossRef

47.

P.V. Nidheesh, R. Gandhimathi, S.T. Ramesh, Degradation of dyes from aqueous solution by Fenton processes: a review. Environ. Sci. Pollut. Res. 20, 2099–2132 (2013)CrossRef

48.

A. Charanpahari, S.S. Umare, R. Sasikala, Visible light active N doped GeO₂ for the photodegradation of both anionic and cationic dyes. Catal. Commun. 40, 9–12 (2013). https://doi.org/10.1016/j.catcom.2013.05.015 CrossRef

49.

U.T.D. Thuy, N.Q. Liem, C.M.A. Parlett et al., Synthesis of CuS and CuS/ZnS core/shell nanocrystals for photocatalytic degradation of dyes under visible light. Catal. Commun. 44, 62–67 (2014). https://doi.org/10.1016/j.catcom.2013.07.030 CrossRef

50.

H. Zhou, Y. Qu, T. Zeid, X. Duan, Towards highly efficient photocatalysts using semiconductor nanoarchitectures. Energy Environ. Sci. 5, 6732 (2012). https://doi.org/10.1039/c2ee03447f CrossRef

51.

K. Sahel, L. Elsellami, I. Mirali et al., Hydrogen peroxide and photocatalysis. Appl. Catal. B Environ. 188, 106–112 (2016). https://doi.org/10.1016/j.apcatb.2015.12.044 CrossRef

52.

D.-H. Tseng, L.-C. Juang, H.-H. Huang, Effect of oxygen and hydrogen peroxide on the photocatalytic degradation of monochlorobenzene in aqueous suspension. Int. J. Photoenergy 2012, 1–9 (2012). https://doi.org/10.1155/2012/328526 CrossRef

53.

S. Rahnamaeiyan, S. Khademolhoseini, Preparation and characterization of cadmium titanate nanoparticles via novel sol–gel method and its photocatalyst application. J. Mater. Sci. Mater. Electron. 27, 6043–6047 (2016). https://doi.org/10.1007/s10854-016-4528-z CrossRef

54.

U.G. Akpan, B.H. Hameed, Parameters affecting the photocatalytic degradation of dyes using TiO₂-based photocatalysts: a review. J. Hazard. Mater. 170, 520–529 (2009). https://doi.org/10.1016/j.jhazmat.2009.05.039 CrossRef

55.

L. Andronic, L. Isac, A. Duta, Photochemical synthesis of copper sulphide/titanium oxide photocatalyst. J. Photochem. Photobiol. A Chem. 221, 30–37 (2011). https://doi.org/10.1016/j.jphotochem.2011.04.018 CrossRef

56.

L.D. Sánchez, S.F.M. Taxt-Lamolle, E.O. Hole et al., TiO₂ suspension exposed to H₂O₂ in ambient light or darkness: degradation of methylene blue and EPR evidence for radical oxygen species. Appl. Catal. B Environ. 142–143, 662–667 (2013). https://doi.org/10.1016/j.apcatb.2013.05.017 CrossRef

Titel: Enhancement of degradation of mordant orange, safranin-O and acridine orange by CuS nanoparticles in the presence of H2O2 in dark and in ambient light
verfasst von: Fizza Siddique
M. A. Rafiq
M. F. Afsar
M. M. Hasan
M. M. Chaudhry
Publikationsdatum: 21.09.2018
Verlag: Springer US
Erschienen in: Journal of Materials Science: Materials in Electronics / Ausgabe 22/2018
Print ISSN: 0957-4522
Elektronische ISSN: 1573-482X
DOI: https://doi.org/10.1007/s10854-018-0044-7

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Nachhaltigkeitsaward Key Visual/© Cometis AG/Global ESG Monitor | Daniel Rupp | Generiert mit KI, Search Icon, Banner Hanser, Jonas Klose/© Pine Valley Capital GmbH, Carina Kießling von der Strategieberatung Roland Berger/© Monika Walther Fotografie | ATZ, Beijing Auto Show 2024: Deutsche Hersteller wollen angreifen./© EKH-Pictures / Generated with AI / Stock.adobe.com, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence 2024/© AndreyPopov / Getty Images / iStock, 2023_Antrieb/© supervisuell, ATZ-Webinar: Prototypenfreie Entwicklung durch Offline- und Driver-in-the-Loop-HiL-Tests /© (c) VI-grade

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 22/2018

Ferroelectric and magneto-dielectric properties of yttrium doped BaTiO3–CoFe2O4 multiferroic composite

Facile hydrothermal assisted synthesis of time dependent Cu2S thin films for efficient photoelectrochemical application

Zinc blende phase detection in ZnO thin films grown with low doping Mn concentration by double-beam pulsed laser deposition

Microstructure and electrical properties of K0.5Na0.5NbO3 lead-free piezoelectric ceramics sintered in low pO2 atmosphere

Nickel deposition on Kevlar fabric modified with aminopropyltrimethoxysilane in supercritical fluid via electroless plating

Fabrication of Fe3O4/CaCO3/CuWO4 heterostructures for enhanced photocatalytic activities for the degradation of organic dyes

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.