Ausgabe 4/2012
Inhalt (20 Artikel)
Complex chemical interactions on thermo hydrolytic degradation of urea formaldehyde resins (UF-resins) in recycling UF-bonded boards
E. Roffael, H.-G. Hüster
Combination of X-ray and digital image correlation for the analysis of moisture-induced strain in wood: opportunities and challenges
Daniel Keunecke, Katia Novosseletz, Christian Lanvermann, David Mannes, Peter Niemz
The potential of color measurements with the CIEDE2000 equation in wood science
Markus Hauptmann, Hermann Pleschberger, Carsten Mai, Jürgen Follrich, Christian Hansmann
Modification of beech veneers with N-methylol-melamine compounds for the production of plywood
Hien Mai Trinh, Holger Militz, Carsten Mai
Embedding strength in joints of fast-growing Argentinean Eucalyptus grandis with dowel-type fasteners. Analysis according to the criterion adopted by European standards
M. A. Sosa Zitto, J. Köhler, J. C. Piter
Increased dimensional stability of Chinese fir through steam-heat treatment
Yongjian Cao, Jianxiong Lu, Rongfeng Huang, Jiali Jiang
Analysis of water adsorption by wood using the Guggenheim-Anderson-de Boer equation
Ł. Bratasz, A. Kozłowska, R. Kozłowski
Physical and mechanical properties of thermally modified wood from E. grandis
F. W. Calonego, E. T. D. Severo, A. W. Ballarin
Microwave-assisted liquefaction of wood with polyhydric alcohols and its application in preparation of polyurethane (PU) foams
Hui Pan, Zhifeng Zheng, Chung Y. Hse
One press cycle production of fiberboard with unsymmetrically distributed densities
Martin Déneši, Tomáš Joščák, Matúš Joščák, Ferdinand Bodnár, Alfred Teischinger
Quantitative Bestimmung von organischen Bioziden in Holzschutzmittelformulierungen mittels Hochdruckflüssigkeitschromatographie
Rainer Hill
Heating characteristics of western hemlock (Tsuga heterophylla) in a high frequency field
Ciprian Lazarescu, Stavros Avramidis
Investigation on bonding quality of beech wood (Fagus orientalis L.) veneer during high temperature drying and aging
Loya Jamalirad, Kazem Doosthoseini, Gerald Koch, Seyed Ahmad Mirshokraie, Johannes Welling
The interactions between wax and UF resin in medium density fibreboard
Warren Grigsby, Armin Thumm
Effect of heat treatment intensity on wood chemical composition and decay durability of Pinus patula
Ahmed Mohareb, Peter Sirmah, Mathieu Pétrissans, Philippe Gérardin
Yield improvement in Rubberwood sawmilling through the saw, dry and rip (SDR) technique
J. Ratnasingam, F. Scholz
Thermogravimetric analysis for wood decay characterisation
Gry Alfredsen, Thomas K. Bader, Janka Dibdiakova, Tore Filbakk, Susanne Bollmus, Karin Hofstetter
The termiticidal properties of superhydrophobic wood surfaces treated with ZnO nanorods
Todd Shupe, Cheng Piao, Cran Lucas
Pilot study for MDF manufacture from sugarcane bagasse and eucalyptus fibers
Ugo Leandro Belini, Mario Tomazello Filho, José Luís Penetra Cerveira Louzada, José Carlos de Carvalho Rodrigues, José Reinaldo Sartori Astolphi
Wood use in a hospital environment: VOC emissions and air quality
Anders Q. Nyrud, Tina Bringslimark, Finn Englund