nach oben

European Journal of Wood and Wood Products

Erschienen in:

01.07.2012 | Originals Originalarbeiten

Physical and mechanical properties of thermally modified wood from E. grandis

verfasst von: F. W. Calonego, E. T. D. Severo, A. W. Ballarin

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 4/2012

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This study was aimed at evaluating the effect of thermal treatment on the physical and mechanical properties of Eucalyptus grandis wood. Boards were taken from 5.9-year-old E. grandis trees. The boards were thermally modified at temperatures up to 220°C in the Laboratory of Wood Drying and Preservation from UNESP, Botucatu, SP, in Brazil. The results indicated that the thermal modification caused significant decreases of up to: (1) 49.3% and 10.5% in the equilibrium moisture content and in the density of wood, respectively; (2) 53.3% in the volumetric swelling; (3) 52.3% in the modulus of rupture at static bending, without changes in the compressive strength parallel to grain and the respective modulus of elasticity; and (4) 20.7% in the Janka hardness. It was found that the specific gravity and compression parallel to the grain test were not the most suitable ones for evaluating the quality of thermally modified wood.

Vorheriger Artikel Analysis of water adsorption by wood using the Guggenheim-Anderson-de Boer equation

Nächster Artikel Microwave-assisted liquefaction of wood with polyhydric alcohols and its application in preparation of polyurethane (PU) foams

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

American Society for Testing and Materials – ASTM D-143 (1994) Standard methods of testing small clear specimens of timber. Annual Book of ASTM Standard

Associação Brasileira de Normas Técnicas – ABNT NBR 7190 (1997) Design of wooden structures. ABNT, Rio de Janeiro (Ações nas estruturas, propriedades da madeira e dimensionamento nos estados limites de utilização) (in Portuguese)

Bekhta P, Niemz P (2003) Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood. Holzforschung 57:539–546 CrossRef

Bhuiyan TR, Hirai N, Sobue N (2000) Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions. J Wood Sci 46:431–436 CrossRef

Bhuiyan TR, Hirai N, Sobue N (2001) Effect of intermittent heat treatment on crystallinity in wood cellulose. J Wood Sci 47:336–341 CrossRef

Bodig J, Jayne BA (1982) Mechanics of wood and wood composites. Van Nostrand Reinhold, New York

Brito JO, Garcia JN, Bortoletto Junior G (2006) The density and shrinkage behavior of Eucalyptus grandis wood submitted to different temperatures of thermoretification. Cerne 12:182–188 (in Portuguese)

Calonego FW, Severo ETD, Furtado EL (2010) Decay resistance of thermally modified Eucalyptus grandis wood at 140°C, 160°C, 180°C, 200°C and 220°C. Bioresour Technol 101:9391–9394 PubMedCrossRef

Esteves B, Marques AV, Domingos I, Pereira H (2007) Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulos) wood. Wood Sci Technol 41:193–207 CrossRef

Products Laboratory Forest (1999) Wood handbook: wood as an engineering material. USDA, Washington

Haygreen JG, Bowyer JL (1996) Forest products and wood science: an introduction. University Press/AMES, Iowa State

Homan W, Tjeerdsma B, Beckers E, Jorissen A (2000) Structural and other properties of modified wood. In: Proceedings world conference on timber engineering, British Columbia

Jämsä S, Viitaniemi P (2001) Heat treatment of wood: better durability without chemicals. In: RAPP AO. Review on heat treatments of wood. In: Special seminar: environmental optimisation of wood protection, Antibes, France. Proceedings… Antibes; COST ACTION E 22:21-26

Kamdem DP, Pizzi A, Jermannaud A (2002) Durability of heat-treated wood. Holz Roh- Werkst 60:1–6 CrossRef

Metsä-Kortelainen S, Anitikainen T, Viitaniemi P (2006) The water absorption of sapwood and heartwood of Scots pines and Norway spruce heat-treated at 170°C, 190°C, 210°C and 230°C. Holz Roh- Werkst 64:192–197 CrossRef

Oliveira JTS (1997) Characterization of eucalypt wood for civil construction. Thesis, University of São Paulo (in Portuguese)

Severo ETD, Calonego FW (2009) Thermal modification process for heat radiation to improve the dimensional stability and biological durability of solid wood. INPI, PI0902/38-8A2 (in Portuguese)

Severo ETD, Tomaselli I (2000) Wood vaporization effect on some mechanical properties of Eucalyptus dunnii. Ci Fl 10:123–133 (in Portuguese)

Unsal O, Ayrilmis N (2005) Variations in compression strength and surface roughness of heat-treated Turkish river red gum (Eucalyptus camaldulensis) wood. J Wood Sci 51:405–409 CrossRef

Vernois M (2001) Heat treatment of wood in France: state of the art. In: RAPP AO. Review on heat treatments of wood. In: Special seminar: environmental optimisation of wood protection, Antibes, France. Proceedings… Antibes, COST ACTION E 22:39–46

Waskett P, Selmes RE (2001) Opportunities for UK grown timber: wood modification state of the art review. Building Research Establishment LTD 203–343, 83p

Weiland JJ, Guyonnet R (2003) Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz Roh-Werkst 61:216–220

Wikberg H, Maunu SL (2004) Characterization of thermally modified hard- and softwoods by ^13C CPMAS NMR. Carbohydr Polym 58:461–466 CrossRef

Titel: Physical and mechanical properties of thermally modified wood from E. grandis
verfasst von: F. W. Calonego
E. T. D. Severo
A. W. Ballarin
Publikationsdatum: 01.07.2012
Verlag: Springer-Verlag
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 4/2012
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-011-0568-5

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2012

Pilot study for MDF manufacture from sugarcane bagasse and eucalyptus fibers

The potential of color measurements with the CIEDE2000 equation in wood science

Effect of heat treatment intensity on wood chemical composition and decay durability of Pinus patula

Modification of beech veneers with N-methylol-melamine compounds for the production of plywood

Embedding strength in joints of fast-growing Argentinean Eucalyptus grandis with dowel-type fasteners. Analysis according to the criterion adopted by European standards

Wood use in a hospital environment: VOC emissions and air quality