Experimental and numerical investigations on adhesively bonded timber joints

Adhesively bonding of timber structural elements provides new opportunities as it is well adapted for the anisotropic and fibrous nature of the material. Experimental and numerical investigations were carried out on adhesively bonded full-scale double-lap joints composed of timber adherends (spruce) and adhesive layers. The influence of different geometric parameters and adhesives on the joint strength was studied. The investigated geometric parameters were the thickness of the adhesive layer (0.5–2.0 mm), the overlap length (40–280 mm), and the ductility of the adhesive (using three different adhesives). It was found that the joint strength was independent of the adhesive layer thickness (for the thickness range investigated) that the joint strength increased with the overlap length up to an apparent maximum of approximately 200 mm and that strength was almost independent of the adhesive stiffness. The numerical investigation was in good agreement with the experimental results and allows for the model to be used for strength prediction of the investigated joints.