nach oben

Archive of Applied Mechanics

Erschienen in:

22.08.2023 | Original

Experimental and theoretical study on out-of-plane compression buckling properties of grid beetle elytron plate

Erschienen in: Archive of Applied Mechanics | Ausgabe 11/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Based on the shell and plate theory, this paper uses the divide-and-combine method (DCM) to derive an analytical out-of-plane compression buckling limit expression of the basic unit of the core layer of a grid beetle elytron plate (GBEP); the accuracy of expression and the mechanism of GBEP unit buckling are investigated through experiments and finite element (FE) simulation. The results show that: (1) the theoretical expression of the out-of-plane compression buckling limit of a GBEP unit obtained by DCM is applicable and is closer to the test results than the classical solution of the out-of-plane compressive buckling of a cylindrical shell and the theoretical result of Flügge. Based on this, a modified expression of the theoretical result of Flügge’s compressive buckling limit load is proposed. (2) Given the significant differences between the theoretical values obtained in this paper and the experimental values, the out-of-plane compressive buckling resistance of the GBEP unit and its mechanism are investigated from the viewpoints of structural parameters \(\eta\) (the ratio of the radius of the trabeculae to the width of the element) and deformation process; the synergistic mechanism of the honeycomb-trabeculae structure is also studied. This paper contributes to improving the bionic system derived from the beetle's forewing.

Vorheriger Artikel Substructured flexible multibody model for simulating toothbrush cleaning process

Nächster Artikel Zipline mathematical model forming, experimental verification and analysis of influential parameters

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

The parameter \({c}_{3}\) in this study has an extra term \({\lambda }^{4}\left(3+2\mu \right)\), compared with that in reference [35] (\({c}_{3}{\prime}={\lambda }^{2}{\left({\lambda }^{2}+{m}^{2}\right)}^{2}+{\lambda }^{2}{m}^{2}\)). It is believed that the author of reference [35] made a mistake. This will be discussed below.

The buckling load expression considering multiple modes will be carried out in the follow-up in-depth research.

Miller, W., Smith, C.W., Scarpa, F., Evans, K.E.: Flatwise buckling optimization of hexachiral and tetrachiral honeycombs. Compos. Sci. Technol. 70, 1049 (2010). https://doi.org/10.1016/j.compscitech.2009.10.022CrossRef

Wang, D., Bai, Z.: Mechanical property of paper honeycomb structure under dynamic compression. Mater. Des. 77, 59 (2015). https://doi.org/10.1016/j.matdes.2015.03.037CrossRef

He, X.D., Kong, X.H., Shi, L.P., Li, M.W.: High-frequency vibration response of metal honeycomb sandwich structure. Adv. Mat. Res. 79–82, 1727–1730 (2009). https://doi.org/10.4028/www.scientific.net/AMR.79-82.1727CrossRef

Kodiyalam, S., Nagendra, S., DeStefano, J.: Composite sandwich structure optimization with application to satellite components. AIAA J. 34, 614–621 (1996). https://doi.org/10.2514/3.13112CrossRefMATH

Liu, Z., Yu, Y., Yang, Z., Wei, Y., Cai, J., Li, M., Huang, C.: Dynamic experimental studies of A6N01S-T5 aluminum alloy material and structure for high-speed trains. Acta Mech. Sinica. 35, 763–772 (2019). https://doi.org/10.1007/s10409-018-0830-8CrossRef

Belingardi, G., Cavatorta, M.P., Duella, R.: Material characterization of a composite–foam sandwich for the front structure of a high speed train. Compos. Struct. 61, 13–25 (2003). https://doi.org/10.1016/S0263-8223(03)00028-XCrossRef

Zhao, C., Zheng, W., Ma, J., Zhao, Y.: The lateral compressive buckling performance of aluminum honeycomb panels for long-span hollow core roofs. Materials 9, 444 (2016). https://doi.org/10.3390/ma9060444CrossRef

Hu, B.: Bio-based composite sandwich panel for residential construction, Newark: University of Delaware (2006)

Briscoe, C.R., Mantell, S.C., Davidson, J.H., Okazaki, T.: Design procedure for web core sandwich panels for residential roofs. J. Sandwich Struct. Mater. 13, 23–58 (2011). https://doi.org/10.1177/1099636210365441CrossRef

10.

Chen, J., Ni, Q., Iwamoto, M.: A reinforced sandwich plate with polygonal grid in the middle, China: ZL 03116503.6 (2006)

11.

Chen, J., Zhang, X., Okabe, Y., Xie, J., Xu, M.: Beetle elytron plate and the synergistic mechanism of a trabecular-honeycomb core structure. Sci. China Technol. Sci. 62, 87–93 (2019). https://doi.org/10.1007/s11431-018-9290-1CrossRef

12.

Chen, J., Gu, C., Guo, S., Wan, C., Wang, X., Xie, J., Hu, X.: Integrated honeycomb technology motivated by the structure of beetle forewings. Mater. Sci. Eng. C 32, 1813–1817 (2012). https://doi.org/10.1016/j.msec.2012.04.067CrossRef

13.

Chen, J., Hao, N., Pan, L., Hu, L., Du, S., Fu, Y.: Characteristics of compressive mechanical properties and strengthening mechanism of 3D-printed grid beetle elytron plates. J. Mater. Sci. 55, 8541–8552 (2020). https://doi.org/10.1007/s10853-020-04630-6CrossRef

14.

Kreja, I.: A literature review on computational models for laminated composite and sandwich panels. Central Eur. J. Eng. 1, 59–80 (2011). https://doi.org/10.2478/s13531-011-0005-xCrossRef

15.

Gibson, L.J., Ashby, M.F.: Cellular Solids. Cambridge University Press, Cambridge (1997)CrossRefMATH

16.

Gotoh, M., Yamashita, M., Kawakita, A.: Crush behavior of honeycomb structure impacted by drop-hammer and its numerical analysis. J. Soc. Mater. Sci. Jpn. 45, 261–266 (1996). https://doi.org/10.2472/jsms.45.12Appendix_261CrossRef

17.

Warren, W.E., Kraynik, A.M.: Foam mechanics: the linear elastic response of two-dimensional spatially periodic cellular materials. Mech. Mater. 6, 27–37 (1987). https://doi.org/10.1016/0167-6636(87)90020-2CrossRef

18.

Hoff, N.J.: Bending and buckling of rectangular sandwich plates, Brooklyn (1950)

19.

Reissner, E.: On small bending and stretching of sandwich-type shells. Int J Solids Struct. 13, 1293–1300 (1977). https://doi.org/10.1016/0020-7683(77)90102-0MathSciNetCrossRefMATH

20.

Rabczuk, T., Kim, J.Y., Samaniego, E., Belytschko, T.: Homogenization of sandwich structures. Int. J. Numer. Methods Eng. 61, 1009–1027 (2004). https://doi.org/10.1002/nme.1100CrossRefMATH

21.

Zhou, Z.: Research on Equivalent of Special Materials, Dalian: Dalian Jiaotong University (2013)

22.

Chen, J., Yu, X., Xu, M., Okabe, Y., Zhang, X., Tuo, W.: The compressive properties and strengthening mechanism of the middle-trabecular beetle elytron plate. J. Sandwich Struct. Mater. 22, 948–961 (2020). https://doi.org/10.1177/1099636218777188CrossRef

23.

Chen, J., Zu, Q., Wu, G., Xie, J., Tuo, W.: Review of beetle forewing structures and their biomimetic applications in China: (II) on the three-dimensional structure, modeling and imitation. Mater. Sci. Eng., C 55, 620–633 (2015). https://doi.org/10.1016/j.msec.2015.04.045CrossRef

24.

Chen, J., Zhang, X., Okabe, Y., Saito, K., Guo, Z., Pan, L.: The deformation mode and strengthening mechanism of compression in the beetle elytron plate. Mater. Des. 131, 481–486 (2017). https://doi.org/10.1016/j.matdes.2017.06.014CrossRef

25.

Chen, J., Tuo, W., Wei, P., Okabe, Y., Xu, M., Xu, M.: Characteristics of the shear mechanical properties and the influence mechanism of short basalt fiber reinforced polymer composite materials. J. Sandwich Struct. Mater. 21, 1520–1534 (2019). https://doi.org/10.1177/1099636217716466CrossRef

26.

Xu, M., Pan, L., Chen, J., Zhang, X., Yu, X.: The flexural properties of end-trabecular beetle elytron plates and their flexural failure mechanism. J. Mater. Sci. 54, 8414–8425 (2019). https://doi.org/10.1007/s10853-019-03488-7CrossRef

27.

Du, S., Hao, N., Chen, J., Li, Y.: Calculation of the equivalent shear moduli of the grid beetle elytron plate core layer. Arch. Appl. Mech. (2022). https://doi.org/10.1007/s00419-022-02311-1CrossRef

28.

Zhang, X.M., Wang, Y.C., Foster, A.S.J., Su, M.N.: Elastic local buckling behaviour of beetle elytron plate. Thin-Walled Struct. 165, 107922 (2021). https://doi.org/10.1016/j.tws.2021.107922CrossRef

29.

Zhang, X.M., Wang, Y.C., Su, M.N., Bartolo, P.: Elastic–plastic buckling behaviour of beetle elytron plate with simple, fixed and flexible core supports. Thin-Walled Struct. 179, 109534 (2022). https://doi.org/10.1016/j.tws.2022.109534CrossRef

30.

Timoshenko, S.P., Gere, J.M.: Theory of Elastic Stability. Courier Corporation, Chelmsford (2009)

31.

Brush, D.O., Jolly, W.L., Brush, O.D., Almroth, B.O.: Buckling of Bars, Plates, and Shells. McGraw-Hill, New York (1975)CrossRefMATH

32.

Wu, L.: The Theory of Plate and Shell. Shanghai Jiaotong University Press, Shanghai (1989)

33.

von Kármán, T., Dunn, L.G., Tsien, H.: The Influence of curvature on the buckling characteristics of structures. In: Collected Works of H.S. Tsien (1938–1956). pp. 122–145. Elsevier (2012)

34.

von Kármán, Th., Tsien, H.: The buckling of thin cylindrical shells under axial compression. J. Aeronaut. Sci. 8, 303–312 (1941)MathSciNetCrossRefMATH

35.

Flügge, W.: Stresses in Shells. Springer, Berlin (1973)CrossRefMATH

36.

Van Vinh, P., Tounsi, A.: Free vibration analysis of functionally graded doubly curved nanoshells using nonlocal first-order shear deformation theory with variable nonlocal parameters. Thin-Walled Struct. 174, 109084 (2022). https://doi.org/10.1016/j.tws.2022.109084CrossRef

37.

Huang, Y., Karami, B., Shahsavari, D., Tounsi, A.: Static stability analysis of carbon nanotube reinforced polymeric composite doubly curved micro-shell panels. Arch. Civil Mech. Eng. 21, 139 (2021). https://doi.org/10.1007/s43452-021-00291-7CrossRef

38.

Katiyar, V., Gupta, A., Tounsi, A.: Microstructural/geometric imperfection sensitivity on the vibration response of geometrically discontinuous bi-directional functionally graded plates (2D-FGPs) with partial supports by using FEM. Steel Compos. Struct. 45, 621–640 (2022)

39.

Van Vinh, P., Van Chinh, N., Tounsi, A.: Static bending and buckling analysis of bi-directional functionally graded porous plates using an improved first-order shear deformation theory and FEM. Eur. J. Mech. A Solids 96, 104743 (2022). https://doi.org/10.1016/j.euromechsol.2022.104743MathSciNetCrossRefMATH

40.

Garg, A., Belarbi, M.-O., Tounsi, A., Li, L., Singh, A., Mukhopadhyay, T.: Predicting elemental stiffness matrix of FG nanoplates using Gaussian Process Regression based surrogate model in framework of layerwise model. Eng. Anal. Bound. Elem. 143, 779–795 (2022). https://doi.org/10.1016/j.enganabound.2022.08.001MathSciNetCrossRefMATH

41.

Cuong-Le, T., Le Minh, H., Nguyen, P., Phan-Vu, P.: Nonlinear bending analysis of porous sigmoid FGM nanoplate via IGA and nonlocal strain gradient theory. Adv. Nano Res. 12, 441–455 (2022). https://doi.org/10.12989/anr.2022.12.5.441CrossRef

42.

Kumar, Y., Gupta, A., Tounsi, A.: Size-dependent vibration response of porous graded nanostructure with FEM and nonlocal continuum model. Adv. Nano Res. 11, 1–17 (2021). https://doi.org/10.12989/anr.2021.11.1.001CrossRef

43.

Alimirzaei, S., Mohammadimehr, M., Tounsi, A.: Nonlinear analysis of viscoelastic micro-composite beam with geometrical imperfection using FEM: MSGT electro-magneto-elastic bending, buckling and vibration solutions. Struct. Eng. Mech. 71, 485–502 (2019). https://doi.org/10.12989/sem.2019.71.5.485CrossRef

44.

Du, S., Li, Y., Chen, J.: The calculation of in-plane equivalent elastic parameters of a grid beetle elytra plate core. Mech. Mater. 161, 103999 (2021). https://doi.org/10.1016/j.mechmat.2021.103999CrossRef

45.

Chen, J.: Stability of Steel Structures: Theory and Design. Science Press, Beijing (2014)

46.

Chen, J., Xie, J., Zhu, H., Guan, S., Wu, G., Noori, M.N., Guo, S.: Integrated honeycomb structure of a beetle forewing and its imitation. Mater. Sci. Eng. C. 32, 613–618 (2012). https://doi.org/10.1016/j.msec.2011.12.020CrossRef

47.

Koiter, W.T.: On the Stability of Elastic Equibrium. National Aeronautics and Space Administration, Washington (1967)

Titel: Experimental and theoretical study on out-of-plane compression buckling properties of grid beetle elytron plate
Publikationsdatum: 22.08.2023
Erschienen in: Archive of Applied Mechanics / Ausgabe 11/2023
Print ISSN: 0939-1533
Elektronische ISSN: 1432-0681
DOI: https://doi.org/10.1007/s00419-023-02486-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2023

Uniformity of anti-plane stresses within a three-phase nonlinear elastic inhomogeneity of arbitrary shape

Dynamical stability of pipe conveying fluid with various lateral distributed loads

Investigation on vibration control of flexible two-link mechanism based on nonlinear energy sink

Modelling growth and formation of thrombi: a multiphasic approach based on the theory of porous media

Parametric design of straight bevel gears based on a new tooth contact analysis model

Nonlinear chatter of CNTs-reinforced composite boring cutter considering unstable region

Premium Partner

Marktübersichten