nach oben

Arabian Journal for Science and Engineering

Erschienen in:

22.12.2022 | Research Article-mechanical Engineering

Experimental Assessment of Variation in Open Area Ratio on Thermohydraulic Performance of Parallel Flow Solar Air Heater

verfasst von: Varun Pratap Singh, Siddharth Jain, Ashish Karn, Gaurav Dwivedi, Tabish Alam, Ashwani Kumar

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 9/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This experimental study explains the phenomena of secondary flow development due to change in rib perforation and the effect on improvement in THPP values due to variation in β and W/w values of a perforated multi-V rib roughness applied in double-pass parallel flow solar air heater (DPPFSAH). The fixed parameters are e/D = 0.043, p/e = 10, α = 60° and W/H = 12, and the range of variable parameters includes β = 0.0–0.31, W/w = 2–10 and Re = 2000–18,000. The optimum values of Nu/Nu_s, f/f_s, THPP and TEIF are observed as 9.66, 12.31, 3.96 and 1.33, respectively, at β = 0.27 and W/w = 6. The maximum improvement in THPP values was 3.96 times and 1.90 times in DPPFSAH with perforation and continuous rib with a smooth plate, respectively. Double-pass SAH outperforms the single-pass SAH. Correlations for Nu and f are also developed for DPPFSAH with ± 14% and ± 7% accuracy.

Graphical Abstract

Vorheriger Artikel Improved Proximity Indexed Value MCDM Method for Solving the Rank Reversal Problem: A Simulation-Based Approach

Nächster Artikel Estimation of Natural Frequencies of Pipe–Fluid–Mass System by Using Causal Discovery Algorithm

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Lu, J.; He, G.; Mao, F.: Solar seasonal thermal energy storage for space heating in residential buildings: optimization and comparison with an air-source heat pump. Energy Sources Part B Econ. Plan. Policy 00(00), 279–296 (2020). https://doi.org/10.1080/15567249.2020.1786192CrossRef

Saini, M.; Sharma, A.; Singh, V.P.; Dwivedi, G.; Jain, S.: Solar thermal receivers—a review. Adv. Mater. Manuf. Energy Eng. 2, 310–325 (2022). https://doi.org/10.1007/978-981-16-8341-1CrossRef

Ghritlahre, H.K.; Verma, M.: Solar air heaters performance prediction using multi-layer perceptron neural network—a systematic review. Energy Sources Part A Recover. Util. Environ. Eff. 00(00), 1–18 (2021). https://doi.org/10.1080/15567036.2021.1923869CrossRef

Arunkumar, H.S., et al.: Review on the design modifications of a solar air heater for improvement in the thermal performance. Sustain. Energy Technol. Assessments 39(January), 1–29 (2020). https://doi.org/10.1016/j.seta.2020.100685CrossRef

Dutt, N.; Binjola, A.; Hedau, A.J.; Kumar, A.; Singh, V.P.; Meena, C.S.: Comparison of CFD results of smooth air duct with experimental and available equations in literature. Int. J. Energy Resour. Appl. 1(1), 40–47 (2022). https://doi.org/10.56896/IJERA.2022.1.1.006CrossRef

Alam, T.; Kim, M.-H.: Heat transfer enhancement in solar air heater duct with conical protrusion roughness ribs. Appl. Therm. Eng. 126, 458–469 (2017). https://doi.org/10.1016/j.applthermaleng.2017.07.181CrossRef

Singh, S.: Experimental and numerical investigations of a single and double pass porous serpentine wavy wiremesh packed bed solar air heater. Renew. Energy 145, 1361–1387 (2020). https://doi.org/10.1016/j.renene.2019.06.137CrossRef

Al-Damook, M.; Obaid, Z.A.H.Z.A.H.; Al Qubeissi, M.; Dixon-Hardy, D.; Cottom, J.; Heggs, P.J.P.J.: CFD modeling and performance evaluation of multipass solar air heaters. Numer. Heat Transf. Part A Appl. 76(6), 438–464 (2019). https://doi.org/10.1080/10407782.2019.1637228CrossRef

Ho, C.D.; Hsiao, C.F.; Chang, H.; Tien, Y.E.: Investigation of device performance for recycling double-pass V-corrugated solar air collectors. Energy Procedia 105, 28–34 (2017). https://doi.org/10.1016/j.egypro.2017.03.275CrossRef

10.

Fudholi, A.; Sopian, K.; Ruslan, M.H.; Othman, M.Y.; Yahya, M.: Thermal efficiency of double pass solar collector with longitudinal fins absorbers. Am. J. Appl. Sci. 8(3), 254–260 (2011). https://doi.org/10.3844/ajassp.2011.254.260CrossRef

11.

Singh, V.P., et al.: Heat transfer and friction factor correlations development for double pass solar air heater artificially roughened with perforated multi-V ribs. Case Stud. Therm. Eng. 39, 102461 (2022). https://doi.org/10.1016/j.csite.2022.102461CrossRef

12.

Singh, V.P., et al.: Recent developments and advancements in solar air heaters : a detailed review. Sustainability 14(19), 1–57 (2022). https://doi.org/10.3390/su141912149CrossRef

13.

Goel, V., et al.: A comprehensive study on the progressive development and applications of solar air heaters. Sol. Energy 229(July), 112–147 (2021). https://doi.org/10.1016/j.solener.2021.07.040CrossRef

14.

Kumar, A.; Sharma, S.; Kumar, S.; Maithani, R.: Thermohydraulic analysis of twisted tape inserts with SiO₂/H₂O nanofluid in heat exchanger. Aust. J. Mech. Eng. 00(00), 1–14 (2021). https://doi.org/10.1080/14484846.2021.1960672CrossRef

15.

Maithani, R.; Sharma, S.; Kumar, A.: Thermo-hydraulic and exergy analysis of inclined impinging jets on absorber plate of solar air heater. Renew. Energy 179, 84–95 (2021). https://doi.org/10.1016/j.renene.2021.07.013CrossRef

16.

Maithani, R.; Kumar, B.; Sharma, S.; Kumar, S.; Kumar, A.: Effect of a unique winglet twisted tape insert on thermal and hydraulic properties of tubular heat exchanger. Exp. Heat Transf. 00(00), 1–22 (2022). https://doi.org/10.1080/08916152.2022.2038725CrossRef

17.

Kumar, B.; Patil, A.K.; Jain, S.; Kumar, M.: Effects of double V cuts in perforated twisted tape insert: an experimental study. Heat Transf. Eng. 41(17), 1473–1484 (2020). https://doi.org/10.1080/01457632.2019.1649926CrossRef

18.

Kumar, R.; Kumar, A.; Goel, V.: Performance improvement and development of correlation for friction factor and heat transfer using computational fluid dynamics for ribbed triangular duct solar air heater. Renew. Energy 131, 788–799 (2019). https://doi.org/10.1016/j.renene.2018.07.078CrossRef

19.

Sharma, S.; Das, R.K.; Kulkarni, K.: Computational and experimental assessment of solar air heater roughened with six different baffles. Case Stud. Therm. Eng. 27(1–18), 101350 (2021). https://doi.org/10.1016/j.csite.2021.101350CrossRef

20.

Kumar, R.; Goel, V.; Bhattacharyya, S.; Tyagi, V.V.; Abusorrah, A.M.: Experimental investigation for heat and flow characteristics of solar air heater having symmetrical gaps in multiple-arc rib pattern as roughness elements. Exp. Heat Transf. (2021). https://doi.org/10.1080/08916152.2021.1905752CrossRef

21.

Arya, N., Kumar, R., Goel, V.: Role of artificial roughness in the performance improvement of solar air heaters. In: Green Energy and Technology, pp. 555–578 (2022)https://doi.org/10.1007/978-981-16-2648-7_23

22.

Sharma, A.; Bharadwaj, G.; Varun: Heat transfer and friction factor correlation development for double-pass solar air heater having V-shaped ribs as roughness elements. Exp. Heat Transf. 30(1), 77–90 (2017). https://doi.org/10.1080/08916152.2016.1161676CrossRef

23.

Alam, T.; Saini, R.P.; Saini, J.S.: Effect of circularity of perforation holes in V-shaped blockages on heat transfer and friction characteristics of rectangular solar air heater duct. Energy Convers. Manag. 86(00), 952–963 (2014). https://doi.org/10.1016/j.enconman.2014.06.050CrossRef

24.

Alam, T.; Meena, C.S.; Balam, N.B.; Kumar, A.; Cozzolino, R.: Thermo-hydraulic performance characteristics and optimization of protrusion rib roughness in solar air heater. Energies 14(11), 1–21 (2021). https://doi.org/10.3390/en14113159CrossRef

25.

Ravi, R.K.; Saini, R.P.: Effect of roughness elements on thermal and thermohydraulic performance of double pass solar air heater duct having discrete multi V-shaped and staggered rib roughness on both sides of the absorber plate. Exp. Heat Transf. 6152(1), 47–67 (2017). https://doi.org/10.1080/08916152.2017.1350217CrossRef

26.

Ravi, R.K.; Saini, R.P.: Experimental investigation on performance of a double pass artificial roughened solar air heater duct having roughness elements of the combination of discrete multi V shaped and staggered ribs. Energy 116, 507–516 (2016). https://doi.org/10.1016/j.energy.2016.09.138CrossRef

27.

Kaur, I.; Singh, P.: Heat and flow characteristics of V-shaped protrusion/concavity combined with miniature V-ribs. Numer. Heat Transf. Part A Appl. (2020). https://doi.org/10.1080/10407782.2020.1793549CrossRef

28.

Kumar, B.; Kumar, M.; Patil, A.K.; Jain, S.: Effect of V cut in perforated twisted tape insert on heat transfer and fluid flow behavior of tube flow: an experimental study. Exp. Heat Transf. 32(6), 524–544 (2019). https://doi.org/10.1080/08916152.2018.1545808CrossRef

29.

Thakur, S., Thakur, N.S.: Impact of multi-staggered rib parameters of the ‘W’ shaped roughness on the performance of a solar air heater channel. In: Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, pp. 1–20 (2020). https://doi.org/10.1080/15567036.2020.1764672

30.

Singh, V.P.; Jain, S.; Gupta, J.M.L.: Analysis of the effect of perforation in multi-v rib artificial roughened single pass solar air heater: part A. Exp. Heat Transf. (2021). https://doi.org/10.1080/08916152.2021.1988761CrossRef

31.

Singh, V.P.; Jain, S.; Gupta, J.M.L.: Performance assessment of double-pass parallel flow solar air heater with perforated multi-V ribs roughness—part B. Exp. Heat Transf. 00(00), 1–18 (2022). https://doi.org/10.1080/08916152.2021.2019147CrossRef

32.

Singh, V.P.; Jain, S.; Gupta, J.M.L.: Analysis of the effect of variation in open area ratio in perforated multi-V rib roughened single pass solar air heater—part A. Energy Sour. Part A Recover Util. Environ. Effects 44, 1–21 (2022). https://doi.org/10.1080/15567036.2022.2029976CrossRef

33.

Singh, V.P.; Jain, S.; Karn, A.; Kumar, A.; Dwivedi, G.: Mathematical modeling of efficiency evaluation of double pass parallel flow solar air heater. Sustainability 14(17), 1–22 (2022). https://doi.org/10.3390/su141710535CrossRef

34.

Hernández, A.L.; Quiñonez, J.E.: Analytical models of thermal performance of solar air heaters of double-parallel flow and double-pass counter flow. Renew. Energy 55, 380–391 (2013). https://doi.org/10.1016/j.renene.2012.12.050CrossRef

35.

Ashok Kumar, B., et al.: Thermohydraulic performance of solar air heater with staggered multiple V-shaped ribs on the absorber plate. Energy 8(1), 387–400 (2017). https://doi.org/10.1016/j.rser.2016.11.192CrossRef

36.

Ong, K.S.S.: Thermal performance of solar air heaters: mathematical model and solution procedure. Sol. Energy 55(2), 93–109 (1995). https://doi.org/10.1016/0038-092X(95)00021-ICrossRef

37.

Gupta, D.; Solanki, S.C.; Saini, J.S.: Heat and fluid flow in rectangular solar air heater ducts having transverse rib roughness on absorber plates. Sol. Energy 51(1), 31–37 (1993). https://doi.org/10.1016/0038-092X(93)90039-QCrossRef

38.

Hans, V.S.; Saini, R.P.; Saini, J.S.: Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with multiple v-ribs. Sol. Energy 84(6), 898–911 (2010). https://doi.org/10.1016/j.solener.2010.02.004CrossRef

39.

Kline, S.J.: The purposes of uncertainty analysis. J. Fluids Eng. 107, 153–160 (1985)CrossRef

40.

Kwak, J.S.; Shin, S.: Effect of hole shape on the heat transfer in a rectangular duct with perforated blockage walls. J. Mech. Sci. Technol. 22(April), 1945–1951 (2008). https://doi.org/10.1007/s12206-008-0736-7CrossRef

41.

Vogiatzis, I.I.; Denizopoulou, A.C.; Ntinas, G.K.; Fragos, V.P.: Simulation analysis of air flow and turbulence statistics in a rib grit roughened duct. Sci. World J. (2014). https://doi.org/10.1155/2014/791513CrossRef

42.

Tariq, A.; Panigrahi, P.K.; Muralidhar, K.: Flow and heat transfer in the wake of a surface-mounted rib with a slit. Exp. Fluids 37(5), 701–719 (2004). https://doi.org/10.1007/s00348-004-0861-8CrossRef

43.

Webb, R.L.; Eckert, E.R.G.: Application of rough surfaces to heat exchanger. Int. J. Heat Mass Transf. 15, 1647–1658 (1972)CrossRef

44.

Saini, S.K.; Saini, R.P.: Development of correlations for Nusselt number and friction factor for solar air heater with roughened duct having arc-shaped wire as artificial roughness. Sol. Energy 82(12), 1118–1130 (2008). https://doi.org/10.1016/j.solener.2008.05.010CrossRef

45.

Singh, V.P.; Jain, S.; Kumar, A.: Establishment of correlations for the Thermo-Hydraulic parameters due to perforation in a multi-V rib roughened single pass solar air heater. Exp. Heat Transf. 35(5), 1–20 (2022). https://doi.org/10.1080/08916152.2022.2064940CrossRef

46.

Tated, M.K.; Singh, D.P.; Dogra, S.: Heat transfer and friction factor characteristics of double pass solar air heater using W-shaped artificial roughness ribs. J. Mech. Civ. Eng. 5(3), 25–30 (2015)

47.

Sharma, A.; Goel, V.; Bharadwaj, G.: Heat transfer and friction characteristics of double pass solar air heater having V-shaped roughness on the absorber plate. J. Renew. Sustain. Energy 5(2014), 1–15 (2013). https://doi.org/10.1063/1.4794747CrossRef

48.

Metwally, M.N.; Abouziyan, H.Z.; Elleathy, A.M.: Performance of advanced corrugated-duct solar air collector compared with five conventional designs. Renew. Energy 10(4), 519–537 (1997)CrossRef

49.

Singh, S.; Chaurasiya, S.K.; Negi, B.S.: “Efficient design of a wavy channel embedded with porous media for solar air heating. Energy Sour. Part A Recover. Util. Environ. Effects 00(00), 1–17 (2020). https://doi.org/10.1080/15567036.2020.1850930CrossRef

50.

Chamoli, S.; Thakur, N.S.S.: Correlations for solar air heater duct with V-shaped perforated baffles as roughness elements on absorber plate. Int. J. Sustain. Energy 35, 37–41 (2013). https://doi.org/10.1080/14786451.2013.857318CrossRef

51.

Jain, S.K.; Misra, R.; Kumar, A.; Agrawal, G.D.: Thermal performance investigation of a solar air heater having discrete V-shaped perforated baffles. Int. J. Ambient Energy 43, 1–10 (2019). https://doi.org/10.1080/01430750.2019.1636874CrossRef

Titel: Experimental Assessment of Variation in Open Area Ratio on Thermohydraulic Performance of Parallel Flow Solar Air Heater
verfasst von: Varun Pratap Singh
Siddharth Jain
Ashish Karn
Gaurav Dwivedi
Tabish Alam
Ashwani Kumar
Publikationsdatum: 22.12.2022
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 9/2023
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-022-07525-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphical Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9/2023

Machine Learning-Based Optimization of a Mini-Channel Heatsink Geometry

Electromechanical Impedance Simulation-Based Evaluation of Cracks in Photovoltaic Solar Cells

Bubble Column Dehumidification for Sweeping Air Membrane Distillation

On Comparison of 3D-Printed ABS and PVDF-Based Sensors for Body-Centric Utility

Entropy Optimization and Slant MHD Mixed Convection Hybrid Nanofluid Flow Within an Oblique Irregular Lid-Driven Enclosure Contains Baffles: Local Thermal Non-equilibrium Model

Cost Optimization of Heat Exchanger Inventory in Cascade Refrigeration Cycles

Premium Partner

Marktübersichten