nach oben

Experimental Mechanics

Erschienen in:

02.03.2020 | Research paper

Experimental Procedure for Energy Dissipation Estimation during High-Cycle Fatigue Loading of Metallic Material

verfasst von: W.P. Yang, J.L. Fan, Q. Guo, X.L. Guo

Erschienen in: Experimental Mechanics | Ausgabe 5/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The fatigue failure process of metal is a complex energy exchange process accompanied by temperature evolution due to energy dissipation and heat transfer, which can be well recorded by infrared thermography. With the development and popularization of infrared thermography, many energy dissipation estimation methods have been proposed. In this work, three types of energy dissipation estimation methods in different time periods during the high-cycle fatigue experiment are derived and improved. The energy dissipations of FV520B stainless steel specimens (which are subjected to different heat treatments) during fatigue cyclic loading are estimated with the different derived methods and compared. The assumptions for thermal loss may be the main reason for error in the different methods. The energy dissipations estimated by the different methods have basically the same overall trend. Finally, some suggestions on high-cycle fatigue experimental procedures for energy dissipation estimation are proposed.

Vorheriger Artikel Acoustic Emission Source Localization with Generalized Regression Neural Network Based on Time Difference Mapping Method

Nächster Artikel An In-Situ, Micro-Mechanical Setup with Accurate, Tri-Axial, Piezoelectric Force Sensing and Positioning

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Fan J, Zhao Y, Guo X (2018) A unifying energy approach for high cycle fatigue behavior evaluation. Mech Mater 120:15–25. https://doi.org/10.1016/j.mechmat.2018.02.001 CrossRef

Luong MP (1995) Infrared thermographic scanning of fatigue in metals. Nucl Eng Des 158(2-3):363–376. https://doi.org/10.1016/0029-5493(95)01043-H CrossRef

Minh PL (1998) Fatigue limit evaluation of metal using an infrared thermographic technique. Mech Mater 28(1-4):155–163. https://doi.org/10.1016/S0167-6636(97)00047-1 CrossRef

La Rosa G, Risitano A (2000) Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components. Int J Fatigue 22(1):65–73. https://doi.org/10.1016/S0142-1123(99)00088-2 CrossRef

Fargione G, Geraci A, La Rosa G, Risitano A (2002) Rapid determination of the fatigue curve by the thermographic method. Int J Fatigue 24(1):11–19. https://doi.org/10.1016/S0142-1123(01)00107-4 CrossRef

Louche H, Chrysochoos A (2001) Thermal and dissipative effects accompanying Lüders band propagation. Mater Sci Eng A 307(1):15–22. https://doi.org/10.1016/S0921-5093(00)01975-4 CrossRef

Chrysochoos A, Louche H (2000) An infrared image processing to analyse the calorific effects accompanying strain localisation. Int J Eng Sci 38(16):1759–1788. https://doi.org/10.1016/S0020-7225(00)00002-1 CrossRef

Boulanger T, Chrysochoos A, Mabru C, Galtier A (2004) Calorimetric analysis of dissipative and thermoelastic effects associated with the fatigue behavior of steels. Int J Fatigue 26(3):221–229. https://doi.org/10.1016/S0142-1123(03)00171-3 CrossRef

Crupi V (2008) An unifying approach to assess the structural strength. Int J Fatigue 30(7):1150–1159. https://doi.org/10.1016/j.ijfatigue.2007.09.007 CrossRef

10.

Cura F, Curti G, Sesana R (2005) A new iteration method for the thermographic determination of fatigue limit in steels. Int J Fatigue 27(4):453–459. https://doi.org/10.1016/j.ijfatigue.2003.12.009 CrossRef

11.

Delpueyo D, Balandraud X, Grediac M (2013) Heat source reconstruction from noisy temperature fields using an optimised derivative Gaussian filter. Infrared Phys Technol 60:312–322. https://doi.org/10.1016/j.infrared.2013.06.004 CrossRef

12.

Bubulinca C, Balandraud X, Grediac M, Stanciu S, Abrudeanu M (2014) Characterization of the mechanical dissipation in shape-memory alloys during stress-induced phase transformation. J Mater Sci 49(2):701–709. https://doi.org/10.1007/s10853-013-7751-5 CrossRef

13.

Maquin F, Pierron F (2007) Refined experimental methodology for assessing the heat dissipated in cyclically loaded materials at low stress levels. C R Mec 335(3):168–174. https://doi.org/10.1016/j.crme.2007.02.004 CrossRefMATH

14.

Maquin F, Pierron F (2009) Heat dissipation measurements in low stress cyclic loading of metallic materials: from internal friction to micro-plasticity. Mech Mater 41(8):928–942. https://doi.org/10.1016/j.mechmat.2009.03.003 CrossRef

15.

Connesson N, Maquin F, Pierron F (2011) Experimental energy balance during the first cycles of cyclically loaded specimens under the conventional yield stress. Exp Mech 51(1):23–44. https://doi.org/10.1007/s11340-010-9336-4 CrossRef

16.

Connesson N, Maquin F, Pierron F (2011) Dissipated energy measurements as a marker of microstructural evolution: 316L and DP600. Acta Mater 59(10):4100–4115. https://doi.org/10.1016/j.actamat.2011.03.034 CrossRef

17.

Morabito A, Chrysochoos A, Dattoma V, Galietti U (2007) Analysis of heat sources accompanying the fatigue of 2024 T3 aluminium alloys. Int J Fatigue 29(5):977–984. https://doi.org/10.1016/j.ijfatigue.2006.06.015 CrossRef

18.

Blanche A, Chrysochoos A, Ranc N, Favier V (2015) Dissipation assessments during dynamic very high cycle fatigue tests. Exp Mech 55(4):699–709. https://doi.org/10.1007/s11340-014-9857-3 CrossRef

19.

Liakat M, Khonsari MM (2016) Analysis and life prediction of a composite laminate under cyclic loading. Compos Part B-Eng 84:98–108. https://doi.org/10.1016/j.compositesb.2015.08.015 CrossRef

20.

Liakat M, Khonsari MM (2015) Entropic characterization of metal fatigue with stress concentration. Int J Fatigue 70:223–234. https://doi.org/10.1016/j.ijfatigue.2014.09.014 CrossRef

21.

Liakat M, Khonsari MM (2015) On the anelasticity and fatigue fracture entropy in high-cycle metal fatigue. Mater Design 82:18–27. https://doi.org/10.1016/j.matdes.2015.04.034 CrossRef

22.

Liakat M, Khonsari MM (2014) Rapid estimation of fatigue entropy and toughness in metals. Mater Design 62:149–157. https://doi.org/10.1016/j.matdes.2014.04.086 CrossRef

23.

Williams P, Liakat M, Khonsari MM, Kabir OM (2013) A thermographic method for remaining fatigue life prediction of welded joints. Mater Design 51:916–923. https://doi.org/10.1016/j.matdes.2013.04.094 CrossRef

24.

Guo Q, Guo X, Fan J, Syed R, Wu C (2015) An energy method for rapid evaluation of high-cycle fatigue parameters based on intrinsic dissipation. Int J Fatigue 80:136–144. https://doi.org/10.1016/j.ijfatigue.2015.04.016 CrossRef

25.

Guo Q, Guo X (2016) Research on high-cycle fatigue behavior of FV520B stainless steel based on intrinsic dissipation. Mater Design 90:248–255. https://doi.org/10.1016/j.matdes.2015.10.103 CrossRef

26.

Meneghetti G (2007) Analysis of the fatigue strength of a stainless steel based on the energy dissipation. Int J Fatigue 29(1):81–94. https://doi.org/10.1016/j.ijfatigue.2006.02.043 CrossRef

27.

Meneghetti G, Ricotta M (2012) The use of the specific heat loss to analyse the low- and high-cycle fatigue behaviour of plain and notched specimens made of a stainless steel. Eng Fract Mech 81:2–16. https://doi.org/10.1016/j.engfracmech.2011.06.010 CrossRef

28.

Meneghetti G, Ricotta M, Atzori B (2013) A synthesis of the push-pull fatigue behaviour of plain and notched stainless steel specimens by using the specific heat loss. Fatigue Fract Eng Mater Struct 36(12):1306–1322. https://doi.org/10.1111/ffe.12071 CrossRef

29.

Meneghetti G, Ricotta M, Atzori B (2016) A two-parameter, heat energy-based approach to analyse the mean stress influence on axial fatigue behaviour of plain steel specimens. Int J Fatigue 82(1):60–70. https://doi.org/10.1016/j.ijfatigue.2015.07.028 CrossRef

30.

Seghir R, Bodelot L, Charkaluk E, Dufrenoy P (2012) Numerical and experimental estimation of thermomechanical fields heterogeneity at the grain scale of 316L stainless steel. Comp Mater Sci 53(1):464–473. https://doi.org/10.1016/j.commatsci.2011.08.036 CrossRef

31.

Seghir R, Charkaluk E, Dufrenoy P, Bodelot L (2010) Thermomechanical couplings in crystalline plasticity under fatigue loading. In Lukas P (ed) Procedia Engineering, vol 2, pp 1155–1164. https://doi.org/10.1016/j.proeng.2010.03.125

32.

Wang XG, Wang L, Huang MX (2016) In-situ evaluation of Luders band associated with martensitic transformation in a medium Mn transformation-induced plasticity steel. Mater Sci Eng A-Struct 674:59–63. https://doi.org/10.1016/j.msea.2016.07.054 CrossRef

33.

Wang XG, Wang L, Huang MX (2017) Kinematic and thermal characteristics of Luders and Portevin-Le Chatelier bands in a medium Mn transformation-induced plasticity steel. Acta Mater 124:17–29. https://doi.org/10.1016/j.actamat.2016.10.069 CrossRef

34.

Krapez JK, Pacou D, Gardette G (2000) Lock-in thermography and fatigue limit of metals. Quantitative infrared thermography, QIRT, 18-21 July 2000, Reims (France). https://doi.org/10.21611/qirt.2000.051

35.

Palumbo D, De Finis R, Ancona F, Galietti U (2017) Damage monitoring in fracture mechanics by evaluation of the heat dissipated in the cyclic plastic zone ahead of the crack tip with thermal measurements. Eng Fract Mech 181:65–76. https://doi.org/10.1016/j.engfracmech.2017.06.017 CrossRef

36.

De Finis R, Palumbo D, Galietti U (2019) A multianalysis thermography-based approach for fatigue and damage investigations of ASTM A182 F6NM steel at two stress ratios. Fatigue Fract Eng Mater Struct 42(1):267–283. https://doi.org/10.1111/ffe.12903 CrossRef

37.

Berthel B, Wattrisse B, Chrysochoos A, Galtier A (2007) Thermographic analysis of fatigue dissipation properties of steel sheets. Strain 43(3):273–279. https://doi.org/10.1111/j.1475-1305.2007.00349.x CrossRef

38.

Berthel B, Chrysochoos A, Wattrisse B, Galtier A (2008) Infrared image processing for the calorimetric analysis of fatigue phenomena. Exp Mech 48(1):79–90. https://doi.org/10.1007/s11340-007-9092-2 CrossRef

39.

Wang C, Blanche A, Wagner D, Chrysochoos A, Bathias C (2014) Dissipative and microstructural effects associated with fatigue crack initiation on an Armco iron. Int J Fatigue 58:152–157. https://doi.org/10.1016/j.ijfatigue.2013.02.009 CrossRef

40.

Mareau C, Favier V, Weber B, Galtier A (2009) Influence of the free surface and the mean stress on the heat dissipation in steels under cyclic loading. Int J Fatigue 31(8-9):1407–1412. https://doi.org/10.1016/j.ijfatigue.2009.03.022 CrossRef

41.

Jongchansitto P, Douellou C, Preechawuttipong I, Balandraud X (2019) Comparison between 0D and 1D approaches for mechanical dissipation measurement during fatigue tests. Strain 55(3):e12307. https://doi.org/10.1111/str.12307 CrossRef

42.

Doudard C, Calloch S, Cugy P, Galtier A, Hild F (2005) A probabilistic two-scale model for high-cycle fatigue life predictions. Fatigue Fract Eng Mater Struct 28(3):279–288. https://doi.org/10.1111/j.1460-2695.2005.00854.x CrossRef

43.

Yang W, Guo X, Guo Q, Fan J (2019) Rapid evaluation for high-cycle fatigue reliability of metallic materials through quantitative thermography methodology. Int J Fatigue 124:461–472. https://doi.org/10.1016/j.ijfatigue.2019.03.024 CrossRef

44.

Fan J, Guo X, Wu C, Crupi V, Guglielmino E (2015) Influence of heat treatments on mechanical behavior of FV520B steel. Exp Tech 39(2):55–64. https://doi.org/10.1111/ext.12019 CrossRef

Titel: Experimental Procedure for Energy Dissipation Estimation during High-Cycle Fatigue Loading of Metallic Material
verfasst von: W.P. Yang
J.L. Fan
Q. Guo
X.L. Guo
Publikationsdatum: 02.03.2020
Verlag: Springer US
Erschienen in: Experimental Mechanics / Ausgabe 5/2020
Print ISSN: 0014-4851
Elektronische ISSN: 1741-2765
DOI: https://doi.org/10.1007/s11340-020-00589-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2020

On the Cover of this Issue: Fracture and Cohesive Parameter Identification of Refractories by DIC up to 1200 °C by A. Doitrand, R. Estevez, M. Thibault, and P. Leplay

Experimental Validation of the Sensitivity-Based Virtual Fields for Identification of Anisotropic Plasticity Models

Fracture and Cohesive Parameter Identification of Refractories by Digital Image Correlation Up to 1200°C

Compact Calibration Data for Hole-Drilling Residual Stress Measurements in Finite-Thickness Specimens

Acoustic Emission Source Localization with Generalized Regression Neural Network Based on Time Difference Mapping Method

Quasi-Gauss Point Digital Image/Volume Correlation: a Simple Approach for Reducing Systematic Errors Due to Undermatched Shape Functions

Premium Partner

Marktübersichten